alvierahman90/qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
docsify_setup
qmk_firmware/Dockerfile

29 lines
620 B
Docker
Raw Permalink Normal View History

Adding Docker build system & documentation
2016-07-15 16:55:40 +00:00
FROM debian:jessie
MAINTAINER Erik Dasque <erik@frenchguys.com>
Cleaning Up Dockerfile Layers Per Official Docs From the official docs: ``` Note: The official Debian and Ubuntu images automatically run apt-get clean, so explicit invocation is not required. ``` Also added ` && rm -rf /var/lib/apt/lists/*` as part of the install line which probably does what was intended (no need to make a new layer). Added apt-get update to the RUN payload, as it should be part of the same layer. Both are documented here: https://docs.docker.com/engine/userguide/eng-image/dockerfile_best-practices/
2017-04-30 22:04:00 +00:00
RUN apt-get update && apt-get install --no-install-recommends -y build-essential \
Adding Docker build system & documentation
2016-07-15 16:55:40 +00:00
gcc \
unzip \
wget \
zip \
gcc-avr \
binutils-avr \
avr-libc \
dfu-programmer \
dfu-util \
gcc-arm-none-eabi \
binutils-arm-none-eabi \
libnewlib-arm-none-eabi \
Cleaning Up Dockerfile Layers Per Official Docs From the official docs: ``` Note: The official Debian and Ubuntu images automatically run apt-get clean, so explicit invocation is not required. ``` Also added ` && rm -rf /var/lib/apt/lists/*` as part of the install line which probably does what was intended (no need to make a new layer). Added apt-get update to the RUN payload, as it should be part of the same layer. Both are documented here: https://docs.docker.com/engine/userguide/eng-image/dockerfile_best-practices/
2017-04-30 22:04:00 +00:00
git \
adding lets split keymap
2017-05-15 01:08:53 +00:00
software-properties-common \
avrdude \
Cleaning Up Dockerfile Layers Per Official Docs From the official docs: ``` Note: The official Debian and Ubuntu images automatically run apt-get clean, so explicit invocation is not required. ``` Also added ` && rm -rf /var/lib/apt/lists/*` as part of the install line which probably does what was intended (no need to make a new layer). Added apt-get update to the RUN payload, as it should be part of the same layer. Both are documented here: https://docs.docker.com/engine/userguide/eng-image/dockerfile_best-practices/
2017-04-30 22:04:00 +00:00
&& rm -rf /var/lib/apt/lists/*
Adding Docker build system & documentation
2016-07-15 16:55:40 +00:00
Update some obsolete references Some links were still pointing to `/keyboards/ergodox_ez`, while the directory is `/keyboards/erdogox` now. Not all references have been updated, and some of the text here and there may need updating to mention the ErgoDox Infinity too, but that's out of the scope for this quick fix. Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
2016-07-30 06:37:30 +00:00
ENV keyboard=ergodox
add subproject env var to dockerfile
2016-10-24 19:29:34 +00:00
ENV subproject=ez
Adding Docker build system & documentation
2016-07-15 16:55:40 +00:00
ENV keymap=default
VOLUME /qmk
Reverted Dockerfile to put the CMD back
2017-02-01 00:59:59 +00:00
WORKDIR /qmk
Reverting CMD Changes Adding the CMD from @edasque in once more as it allows specifying more than one board via host ENV vars. Currently, the Dockerfile is hard-coded.
2017-08-19 07:38:31 +00:00
CMD make clean ; make keyboard=${keyboard} subproject=${subproject} keymap=${keymap}
Reference in New Issue Copy Permalink