qmk_firmware/converter/sun_usb/config.h

99 lines
3.2 KiB
C
Raw Normal View History

2012-10-18 01:41:37 +00:00
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x3333
2012-10-19 05:06:18 +00:00
#define DEVICE_VER 0x0100
2012-10-18 01:41:37 +00:00
#define MANUFACTURER t.m.k.
#define PRODUCT Sun keyboard converter
#define DESCRIPTION converts Sun keyboard protocol into USB
/* matrix size */
#define MATRIX_ROWS 16
#define MATRIX_COLS 8
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \
2012-10-19 05:06:18 +00:00
keyboard_report->mods == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
2012-10-18 01:41:37 +00:00
)
/* legacy keymap support */
#define USE_LEGACY_KEYMAP
/* Boot Section Size in *BYTEs*
* Teensy halfKay 512
* Teensy++ halfKay 1024
* Atmel DFU loader 4096
* LUFA bootloader 4096
* USBaspLoader 2048
*/
#define BOOTLOADER_SIZE 4096
2012-10-18 01:41:37 +00:00
/* Serial(USART) configuration
* asynchronous, negative logic, 1200baud, no flow control
* 1-start bit, 8-data bit, non parity, 1-stop bit
*/
2013-02-24 23:40:15 +00:00
#define SERIAL_SOFT_BAUD 1200
#define SERIAL_SOFT_PARITY_NONE
#define SERIAL_SOFT_BIT_ORDER_LSB
#define SERIAL_SOFT_LOGIC_NEGATIVE
/* RXD Port */
#define SERIAL_SOFT_RXD_ENABLE
#define SERIAL_SOFT_RXD_DDR DDRD
#define SERIAL_SOFT_RXD_PORT PORTD
#define SERIAL_SOFT_RXD_PIN PIND
#define SERIAL_SOFT_RXD_BIT 2
#define SERIAL_SOFT_RXD_VECT INT2_vect
/* RXD Interupt */
#define SERIAL_SOFT_RXD_INIT() do { \
2012-10-19 05:06:18 +00:00
/* pin configuration: input with pull-up */ \
2013-02-24 23:40:15 +00:00
SERIAL_SOFT_RXD_DDR &= ~(1<<SERIAL_SOFT_RXD_BIT); \
SERIAL_SOFT_RXD_PORT |= (1<<SERIAL_SOFT_RXD_BIT); \
/* enable interrupt: INT2(rising edge) */ \
EICRA |= ((1<<ISC21)|(1<<ISC20)); \
EIMSK |= (1<<INT2); \
sei(); \
2012-10-19 05:06:18 +00:00
} while (0)
2013-02-24 23:40:15 +00:00
#define SERIAL_SOFT_RXD_INT_ENTER()
#define SERIAL_SOFT_RXD_INT_EXIT() do { \
/* clear interrupt flag */ \
EIFR = (1<<INTF2); \
2012-10-19 05:06:18 +00:00
} while (0)
2013-02-24 23:40:15 +00:00
#define SERIAL_SOFT_RXD_READ() (SERIAL_SOFT_RXD_PIN&(1<<SERIAL_SOFT_RXD_BIT))
/* TXD Port */
#define SERIAL_SOFT_TXD_ENABLE
#define SERIAL_SOFT_TXD_DDR DDRD
#define SERIAL_SOFT_TXD_PORT PORTD
#define SERIAL_SOFT_TXD_PIN PIND
#define SERIAL_SOFT_TXD_BIT 3
#define SERIAL_SOFT_TXD_HI() do { SERIAL_SOFT_TXD_PORT |= (1<<SERIAL_SOFT_TXD_BIT); } while (0)
#define SERIAL_SOFT_TXD_LO() do { SERIAL_SOFT_TXD_PORT &= ~(1<<SERIAL_SOFT_TXD_BIT); } while (0)
#define SERIAL_SOFT_TXD_INIT() do { \
/* pin configuration: output */ \
SERIAL_SOFT_TXD_DDR |= (1<<SERIAL_SOFT_TXD_BIT); \
/* idle */ \
SERIAL_SOFT_TXD_ON(); \
2012-10-21 13:12:36 +00:00
} while (0)
2012-10-18 01:41:37 +00:00
#endif