qmk_firmware/keyboards/cannonkeys/satisfaction75/rules.mk

# MCU name
MCU = STM32F072
BOARD = ST_STM32F072B_DISCOVERY

# Build Options
#   comment out to disable the options.
#

SRC += led.c \
      satisfaction_encoder.c \
      satisfaction_oled.c

#BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes	# Mouse keys
EXTRAKEY_ENABLE = yes	# Audio control and System control
CONSOLE_ENABLE = yes	# Console for debug
COMMAND_ENABLE = yes    # Commands for debug and configuration
SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes	    # USB Nkey Rollover
CUSTOM_MATRIX = no # Custom matrix file
ENCODER_ENABLE = yes
QWIIC_ENABLE += MICRO_OLED
#BACKLIGHT_ENABLE = yes

DEFAULT_FOLDER = cannonkeys/satisfaction75/rev1


# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE
Refactor f103,f072,f042 based keyboards to use new MCU selection defaults (#7705) * refactor keyboards using ST_STM32F072B_DISCOVERY to use 'MCU = STM32F072' * refactor keyboards using GENERIC_STM32_F042X6 to use 'MCU = STM32F042' * refactor keyboards using GENERIC_STM32_F103 to use 'MCU = STM32F103' 2020-01-10 01:31:01 +00:00			`# MCU name`
			`MCU = STM32F072`
Fix RESET keycode on some STM32F072 keyboards (#8134) * Add f072 board files with 'enter_bootloader_mode_if_requested' support * rename default f072 board file to GENERIC_STM32_F072XB * Remove board files * Add bootloader def * Update generic f072 board paths * Revert wrong deletion 2020-02-13 19:39:22 +00:00			`BOARD = ST_STM32F072B_DISCOVERY`
Add Satisfaction75 to QMK, Enable EEPROM on stm32f072 (#5094) * Add stm32f072 base ck4x4 to handwired * add prints * Save these tries * Save changes again * Working hadron oled * OLEd working but ws2812b still iffy: * save another try * Encoder feature + OLED * RTC code * Implement clock setting mode * Whitespace * Encoder hooked up to working LED PWM code * Add missing files * eeprom changes * Save changes * Move i2c master * Move satisfaction75 under cannonkeys * Set proper default folder * Revert some core changes * Undo paved iris changes * Reorganize code for maintainability and prep for new features * Add starting code for clock OLED mode * Clock set mode finished * Add custom encoder modes * Actually add VIA keymap * Gate to only 072 * fix gate for only 072 * Update header guards and includes * Update i2c selection strategy * Update board.c to handle software reset to DFU 2019-02-13 16:03:26 +00:00
			`# Build Options`
			`# comment out to disable the options.`
			`#`

			`SRC += led.c \`
			`satisfaction_encoder.c \`
			`satisfaction_oled.c`

			`#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration`
			`MOUSEKEY_ENABLE = yes # Mouse keys`
			`EXTRAKEY_ENABLE = yes # Audio control and System control`
			`CONSOLE_ENABLE = yes # Console for debug`
			`COMMAND_ENABLE = yes # Commands for debug and configuration`
			`SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend`
			`NKRO_ENABLE = yes # USB Nkey Rollover`
			`CUSTOM_MATRIX = no # Custom matrix file`
			`ENCODER_ENABLE = yes`
			`QWIIC_ENABLE += MICRO_OLED`
			`#BACKLIGHT_ENABLE = yes`

[Keyboard] Satisfaction75 Protoype/Rev1 split, and new VIA features (#5303) * Add satisfaction75 revision 1 * Update manufacturer * Add tester layout and update rev1 comments * Add ifdef guards for OLED for tester * Add oled disabling rules * Update to save backlight settings and setup for VIA custom config * Add new VIA values to satisfaction75 * Safety guard in clock set mode * Fix mistaken doc edit * Address PR comments * bring the default back to pass travis CI * Address further PR comments 2019-03-12 03:47:50 +00:00			`DEFAULT_FOLDER = cannonkeys/satisfaction75/rev1`
Move CORTEX_ENABLE_WFI_IDLE=TRUE to rules.mk files. 2020-01-02 22:58:34 +00:00

			`# Enter lower-power sleep mode when on the ChibiOS idle thread`
			`OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE`