qmk_firmware/keyboards/mechlovin/hannah60rgb/rev1/config.h

#pragma once

#define PRODUCT_ID   0x6001
#define DEVICE_VER   0x0001
#define PRODUCT      Hannah60 RGB

#define RGB_DI_PIN A15
#ifdef RGB_MATRIX_ENABLE
#    define DRIVER_LED_TOTAL 72
#    define RGB_MATRIX_KEYPRESSES // reacts to keypresses
#    define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)
#    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
#    define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
// #    define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
#    define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)
#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255
#    define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set
#endif
[Keyboard] Add hannah60rgb rev.2 PCB (#10287) * add hannah60rgb_rev2 * add * Update rev2.c * fixed rgb matrix * Update rev2.c * update rules.mk * update readme * update * Update config.h * Update rules.mk 2020-10-04 19:23:35 +00:00			`#pragma once`

			`#define PRODUCT_ID 0x6001`
			`#define DEVICE_VER 0x0001`
			`#define PRODUCT Hannah60 RGB`

			`#define RGB_DI_PIN A15`
			`#ifdef RGB_MATRIX_ENABLE`
			`# define DRIVER_LED_TOTAL 72`
			`# define RGB_MATRIX_KEYPRESSES // reacts to keypresses`
			`# define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses)`
			`# define RGB_MATRIX_FRAMEBUFFER_EFFECTS`
			`# define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects`
Fix RGB/LED Suspend defines (#13146) 2021-06-10 05:59:19 +00:00			`// # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended`
[Keyboard] Add hannah60rgb rev.2 PCB (#10287) * add hannah60rgb_rev2 * add * Update rev2.c * fixed rgb matrix * Update rev2.c * update rules.mk * update readme * update * Update config.h * Update rules.mk 2020-10-04 19:23:35 +00:00			`# define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness)`
			`# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255`
			`# define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set`
Fix RGB/LED Suspend defines (#13146) 2021-06-10 05:59:19 +00:00			`#endif`