New keymap for The Helix keyboard("five_rows") (#2592)
* duplicate keyboards/helix/rev2/keymaps/default to keyboards/helix/rev2/keymaps/five_rows
* OLED Layer display 'Qwerty','Colemak','Dvorak'
* set Qwerty, Lower, Raise map
* set Colemak map
* set Dvorak map
* OLED Layer display 'Raise','Lower' change to 'Extra char','Function'
* fix ExtraChar Layer Shift-key disable
* Raise,Lower,Adjust layer modify
some key change KC_TRNS to KC_NO
add KANA, EISU key
* refine keymaps/five_rows/{config.h,rules.mk} for easy and safe customize
* modify Adjust layer: all function into left hand, remove F1..F12,DEL
* Add Helix five_rows keymap README.md and README_jp.md
* Raise Layer modify: enable Raise(Extr)+Lower(Func)==Adjust
* fix image file url in README.md,README_jp.md
* change Layer display on OLED
* change OLED display base name position
2018-03-23 23:08:37 +00:00
|
|
|
/*
|
|
|
|
|
This is the c configuration file for the keymap
|
|
|
|
|
|
|
|
|
|
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
|
|
|
|
Copyright 2015 Jack Humbert
|
2020-12-25 17:38:07 +00:00
|
|
|
Copyright 2020 mtei
|
New keymap for The Helix keyboard("five_rows") (#2592)
* duplicate keyboards/helix/rev2/keymaps/default to keyboards/helix/rev2/keymaps/five_rows
* OLED Layer display 'Qwerty','Colemak','Dvorak'
* set Qwerty, Lower, Raise map
* set Colemak map
* set Dvorak map
* OLED Layer display 'Raise','Lower' change to 'Extra char','Function'
* fix ExtraChar Layer Shift-key disable
* Raise,Lower,Adjust layer modify
some key change KC_TRNS to KC_NO
add KANA, EISU key
* refine keymaps/five_rows/{config.h,rules.mk} for easy and safe customize
* modify Adjust layer: all function into left hand, remove F1..F12,DEL
* Add Helix five_rows keymap README.md and README_jp.md
* Raise Layer modify: enable Raise(Extr)+Lower(Func)==Adjust
* fix image file url in README.md,README_jp.md
* change Layer display on OLED
* change OLED display base name position
2018-03-23 23:08:37 +00:00
|
|
|
|
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
|
|
|
it under the terms of the GNU General Public License as published by
|
|
|
|
|
the Free Software Foundation, either version 2 of the License, or
|
|
|
|
|
(at your option) any later version.
|
|
|
|
|
|
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
GNU General Public License for more details.
|
|
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
|
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#ifndef CONFIG_USER_H
|
|
|
|
|
#define CONFIG_USER_H
|
|
|
|
|
|
Keyboard: Helix serial improvements (#3608)
* add change_reciver2sender()/change_sender2reciver()
This is a change to improve readability.
* txled, rxled off in matrix_init()
* add serial_send_packet() / serial_recive_packet()
This is a change to reduce object size.
* add serial_low() at ISR() top
* add __attribute__((always_inline)) to some functions
* modify serial_send_packet()/serial_recive_packet()
A little, object size reduction.
A little, speedup.
* add debug code to helix/serial.c
* Adjust sampling timing of serial signal being received
* add split_scomm.c/split_scomm.h and change serial.c/serial.h
serial.c was divided into 2 layers, split_scom.c and serial.c.
The upper layer split_scomm.c is called from matrix.c.
The lower layer serial.c accesses the hardware.
* add split_scomm.c/split_scomm.h into helix/rev1
* reduce object size helix/rev2/matrix.c
* remove checksum check, add parity check
* force occur parity error for test
* parity test ok. remove test code
* change some comment & add skip code when buffer_size == 0
* serial.c: multiple types of transaction support
Add 4 bits transaction-type field at packet top.
Select Transaction Descriptor Table entry by transaction-type.
* helix serial master-slave transaction optimize
Using multi-type transaction feature of serial.c, communication contents between master slaves were optimized.
* add debug code for retry
* add comment into each config.h
* fix ISR status drop
* add a debug macro 'debug_retry_chg()'
* reduce led_test size
* remove debug code from helix/serial.c and etc.
* helix:five_rows change TAPPING_TERM value 140
* Improved compatibility with let's split of serial.c. Finish helix/serial.c improvement.
- The difference with the original let's split's serial.c
- It's high-speed about 4 times.
- Stable bi-directional data transfer. (Helix need master to slave transfer)
- serial.h was divided 2 files, serial_config.h and sereial.h
- With multiple types of transaction support, communication contents can be optimized. (NEW flexible API)
- USE OLD Simple APIs (compatible with let's split serial.c)
- files :
- serial_config.h -- hardware configuration (need include by config.h)
- serial.c/serial.h -- serial communication
- USE NEW flexible APIs. (Support multi-type transaction function.)
serial.c was divided into 2 layers, split_scom.c and serial.c.
The upper layer split_scomm.c is called from matrix.c.
The lower layer serial.c accesses the hardware.
- files
- split_scomm.c -- communication buffer is defined in here. call by matrix.c.
- split_scomm.h -- buffer size is defined in here. include by matrix.c, split_util.c
- serial_config.h -- hardware configuration (need include by config.h)
To use the NEW API, specify #define SERIAL_USE_MULTI_TRANSACTION
- serial.c/serial.h -- serial communication lower layer
- NEW APIs for serial.c / serial.h (The lower layer)
// Soft Serial Transaction Descriptor
typedef struct _SSTD_t {
uint8_t *status;
uint8_t initiator2target_buffer_size;
uint8_t *initiator2target_buffer;
uint8_t target2initiator_buffer_size;
uint8_t *target2initiator_buffer;
} SSTD_t;
// initiator is transaction start side
void soft_serial_initiator_init(SSTD_t *sstd_table);
// target is interrupt accept side
void soft_serial_target_init(SSTD_t *sstd_table);
int soft_serial_transaction(int sstd_index);
int soft_serial_get_and_clean_target_status(int sstd_index);
- NEW APIs for split_scomm.c / split_scomm.h (The upper layer)
move from old serial.c the following buffer and functions
serial_slave_buffer[]
serial_master_buffer[]
void serial_master_init(void)
void serial_slave_init(void)
int serial_update_buffers(void)
define SERIAL_xxxxx_BUFFER_LENGTH move from serial_config.h to split_scomm.h
2018-08-10 15:22:09 +00:00
|
|
|
#undef TAPPING_TERM
|
2018-10-05 21:51:34 +00:00
|
|
|
#define TAPPING_TERM 300
|
|
|
|
|
#define PERMISSIVE_HOLD
|
|
|
|
|
/* when TAPPING_TERM >= 500 same effect PERMISSIVE_HOLD.
|
|
|
|
|
see tmk_core/common/action_tapping.c */
|
Keyboard: Helix serial improvements (#3608)
* add change_reciver2sender()/change_sender2reciver()
This is a change to improve readability.
* txled, rxled off in matrix_init()
* add serial_send_packet() / serial_recive_packet()
This is a change to reduce object size.
* add serial_low() at ISR() top
* add __attribute__((always_inline)) to some functions
* modify serial_send_packet()/serial_recive_packet()
A little, object size reduction.
A little, speedup.
* add debug code to helix/serial.c
* Adjust sampling timing of serial signal being received
* add split_scomm.c/split_scomm.h and change serial.c/serial.h
serial.c was divided into 2 layers, split_scom.c and serial.c.
The upper layer split_scomm.c is called from matrix.c.
The lower layer serial.c accesses the hardware.
* add split_scomm.c/split_scomm.h into helix/rev1
* reduce object size helix/rev2/matrix.c
* remove checksum check, add parity check
* force occur parity error for test
* parity test ok. remove test code
* change some comment & add skip code when buffer_size == 0
* serial.c: multiple types of transaction support
Add 4 bits transaction-type field at packet top.
Select Transaction Descriptor Table entry by transaction-type.
* helix serial master-slave transaction optimize
Using multi-type transaction feature of serial.c, communication contents between master slaves were optimized.
* add debug code for retry
* add comment into each config.h
* fix ISR status drop
* add a debug macro 'debug_retry_chg()'
* reduce led_test size
* remove debug code from helix/serial.c and etc.
* helix:five_rows change TAPPING_TERM value 140
* Improved compatibility with let's split of serial.c. Finish helix/serial.c improvement.
- The difference with the original let's split's serial.c
- It's high-speed about 4 times.
- Stable bi-directional data transfer. (Helix need master to slave transfer)
- serial.h was divided 2 files, serial_config.h and sereial.h
- With multiple types of transaction support, communication contents can be optimized. (NEW flexible API)
- USE OLD Simple APIs (compatible with let's split serial.c)
- files :
- serial_config.h -- hardware configuration (need include by config.h)
- serial.c/serial.h -- serial communication
- USE NEW flexible APIs. (Support multi-type transaction function.)
serial.c was divided into 2 layers, split_scom.c and serial.c.
The upper layer split_scomm.c is called from matrix.c.
The lower layer serial.c accesses the hardware.
- files
- split_scomm.c -- communication buffer is defined in here. call by matrix.c.
- split_scomm.h -- buffer size is defined in here. include by matrix.c, split_util.c
- serial_config.h -- hardware configuration (need include by config.h)
To use the NEW API, specify #define SERIAL_USE_MULTI_TRANSACTION
- serial.c/serial.h -- serial communication lower layer
- NEW APIs for serial.c / serial.h (The lower layer)
// Soft Serial Transaction Descriptor
typedef struct _SSTD_t {
uint8_t *status;
uint8_t initiator2target_buffer_size;
uint8_t *initiator2target_buffer;
uint8_t target2initiator_buffer_size;
uint8_t *target2initiator_buffer;
} SSTD_t;
// initiator is transaction start side
void soft_serial_initiator_init(SSTD_t *sstd_table);
// target is interrupt accept side
void soft_serial_target_init(SSTD_t *sstd_table);
int soft_serial_transaction(int sstd_index);
int soft_serial_get_and_clean_target_status(int sstd_index);
- NEW APIs for split_scomm.c / split_scomm.h (The upper layer)
move from old serial.c the following buffer and functions
serial_slave_buffer[]
serial_master_buffer[]
void serial_master_init(void)
void serial_slave_init(void)
int serial_update_buffers(void)
define SERIAL_xxxxx_BUFFER_LENGTH move from serial_config.h to split_scomm.h
2018-08-10 15:22:09 +00:00
|
|
|
|
2020-12-25 17:38:07 +00:00
|
|
|
#undef OLED_UPDATE_INTERVAL
|
|
|
|
|
#define OLED_UPDATE_INTERVAL 50
|
|
|
|
|
|
2018-06-30 20:12:17 +00:00
|
|
|
// place overrides here
|
2018-04-15 16:54:56 +00:00
|
|
|
|
2018-10-05 21:51:34 +00:00
|
|
|
// If you need more program area, try select and reduce rgblight modes to use.
|
|
|
|
|
|
2021-04-03 19:42:29 +00:00
|
|
|
#define DISABLE_SYNC_TIMER
|
|
|
|
|
|
2018-10-05 21:51:34 +00:00
|
|
|
// Selection of RGBLIGHT MODE to use.
|
2020-12-25 17:38:07 +00:00
|
|
|
#undef RGBLIGHT_ANIMATIONS
|
|
|
|
|
#undef RGBLIGHT_EFFECT_BREATHING
|
|
|
|
|
#undef RGBLIGHT_EFFECT_RAINBOW_MOOD
|
|
|
|
|
#undef RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
|
|
|
|
#undef RGBLIGHT_EFFECT_SNAKE
|
|
|
|
|
#undef RGBLIGHT_EFFECT_KNIGHT
|
|
|
|
|
#undef RGBLIGHT_EFFECT_CHRISTMAS
|
|
|
|
|
#undef RGBLIGHT_EFFECT_STATIC_GRADIENT
|
|
|
|
|
#undef RGBLIGHT_EFFECT_RGB_TEST
|
|
|
|
|
#undef RGBLIGHT_EFFECT_ALTERNATING
|
|
|
|
|
|
2018-10-05 21:51:34 +00:00
|
|
|
#if defined(LED_ANIMATIONS)
|
2020-12-25 17:38:07 +00:00
|
|
|
# if LED_ANIMATIONS_LEVEL > 1
|
2018-10-05 21:51:34 +00:00
|
|
|
#define RGBLIGHT_EFFECT_BREATHING
|
|
|
|
|
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
|
|
|
|
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
|
|
|
|
//#define RGBLIGHT_EFFECT_SNAKE
|
|
|
|
|
//#define RGBLIGHT_EFFECT_KNIGHT
|
|
|
|
|
#define RGBLIGHT_EFFECT_CHRISTMAS
|
|
|
|
|
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
|
|
|
|
//#define RGBLIGHT_EFFECT_RGB_TEST
|
|
|
|
|
//#define RGBLIGHT_EFFECT_ALTERNATING
|
2020-12-25 17:38:07 +00:00
|
|
|
# else
|
|
|
|
|
#define RGBLIGHT_EFFECT_BREATHING
|
|
|
|
|
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
|
|
|
|
//#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
|
|
|
|
//#define RGBLIGHT_EFFECT_SNAKE
|
|
|
|
|
//#define RGBLIGHT_EFFECT_KNIGHT
|
|
|
|
|
//#define RGBLIGHT_EFFECT_CHRISTMAS
|
|
|
|
|
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
|
|
|
|
//#define RGBLIGHT_EFFECT_RGB_TEST
|
|
|
|
|
//#define RGBLIGHT_EFFECT_ALTERNATING
|
|
|
|
|
# endif
|
2018-10-05 21:51:34 +00:00
|
|
|
#endif
|
|
|
|
|
|
2018-04-15 16:54:56 +00:00
|
|
|
#endif /* CONFIG_USER_H */
|
2020-12-25 17:38:07 +00:00
|
|
|
|
|
|
|
|
#ifdef DEBUG_CONFIG
|
|
|
|
|
# include "debug_config.h"
|
|
|
|
|
#endif
|
