2021-07-22 06:39:45 +00:00
|
|
|
# Default keymap for m122-3270
|
2021-07-25 01:02:36 +00:00
|
|
|
|
2021-07-22 06:39:45 +00:00
|
|
|
This keymap is intended to make the PC/3270 122-key IBM keyboard work as closely as possible to the standard
|
|
|
|
|
PC/3270 keyboard's original mapping. Two layers are defined: layer 0 is the PC layout, using the blue legends
|
|
|
|
|
on the PC/3270 keys (as shipped by Unicomp; I don't have the original keycaps, and I know there are a few
|
|
|
|
|
differences), while layer 1 is the 3270 layout, with keycodes selected to make the x3270 suite do the right
|
|
|
|
|
thing with each key as pressed. The idea here is, eventually, to get x3270 and friends to automatically
|
|
|
|
|
shift the keyboard to layer 1 when they gain focus.
|
|
|
|
|
|
|
|
|
|
When layer 0 is active, the PA1 key is Escape, the Reset and Enter keys are Control, and the comma and dot keys
|
|
|
|
|
act like normal PC keys (< and >, repectively, when shifted). The Ctrl key (bottom right of the left-side 10-key
|
|
|
|
|
cluster) is always the left GUI key. PA2 and Jump/PA3 are PgUp and PgDn, respectively, and the backtab key is
|
|
|
|
|
End. The Rule/Home key is Home.
|
|
|
|
|
|
|
|
|
|
When layer 1 is active, the keys do their labeled functions. The only keys that don't do anything are CrSel,
|
|
|
|
|
ExSel, and Jump, though only a few of the alternate functions (on the front of the keys) work: left/right/delete
|
|
|
|
|
word and PA3. The rest aren't emulated by x3270. Many of the keys that have function in PC mode will *not* have
|
|
|
|
|
that same function in 3270 mode, since x3270 uses different keystrokes to accomplish the same function.
|
|
|
|
|
|
|
|
|
|
To manually switch to layer 1, hold the Zoom key (the one on the far lower left of the keyboard) and press Clear
|
|
|
|
|
(the one at the top right of that same block of 10 keys); to switch back to layer 0, hold the Zoom key and hit
|
|
|
|
|
Attn (the one at the top left of that block of 10). Holding the Zoom key and the spacebar gets you to keys that
|
|
|
|
|
control QMK itself: Zoom-space-R resets to the bootloader, Zoom-space-E erases the EEPROM (which currently does
|
|
|
|
|
nothing), and Zoom-space-D turns the debugger on and off.
|
