qmk_firmware/keyboards/crkbd/keymaps/vlukash_trackpad_left/keymap.c

#include QMK_KEYBOARD_H
#include "bootloader.h"
#ifdef PROTOCOL_LUFA
  #include "lufa.h"
  #include "split_util.h"
#endif
#ifdef SSD1306OLED
  #include "ssd1306.h"
#endif

#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
#endif

enum layer_names {
  _QWERTY,
  _LOWER,
  _RAISE,
  _ADJUST
};

enum custom_keycodes {
  QWERTY = SAFE_RANGE,
  LOWER,
  RAISE,
  RGBRST,
  MBTN1,
  SCRL
};

#define KC_LOWER LOWER
#define KC_RAISE RAISE
#define KC_RST   RESET
#define KC_LRST  RGBRST
#define KC_LTOG  RGB_TOG
#define KC_LHUI  RGB_HUI
#define KC_LHUD  RGB_HUD
#define KC_LSAI  RGB_SAI
#define KC_LSAD  RGB_SAD
#define KC_LVAI  RGB_VAI
#define KC_LVAD  RGB_VAD
#define KC_LMOD  RGB_MOD

#define KC_CTLA CTL_T(KC_A)
#define KC_CTLSC CTL_T(KC_SCLN)
#define KC_SFTZ SFT_T(KC_Z)
#define KC_SFTSL SFT_T(KC_SLSH)
#define KC_WINX LWIN_T(KC_X)
#define KC_WINDO RWIN_T(KC_DOT)

#define KC_MBTN1  MBTN1
#define KC_SCRL   SCRL

const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  [_QWERTY] = LAYOUT(
  //,-----------------------------------------.                ,-----------------------------------------.
        KC_ESC,     KC_Q,     KC_W,     KC_E,     KC_R,     KC_T,                      KC_Y,     KC_U,     KC_I,     KC_O,     KC_P,  KC_BSPC,
  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
        KC_TAB,  KC_CTLA,     KC_S,     KC_D,     KC_F,     KC_G,                      KC_H,     KC_J,     KC_K,     KC_L, KC_CTLSC,  KC_QUOT,
  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
      KC_GRAVE,  KC_SFTZ,  KC_WINX,     KC_C,     KC_V,     KC_B,                      KC_N,     KC_M,  KC_COMM, KC_WINDO, KC_SFTSL,KC_BSLASH,
  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
                                  KC_LOWER,   KC_SPC,  KC_SCRL,    KC_MBTN1,   KC_ENT, KC_RAISE
                              //`--------------------'  `--------------------'
  ),

  [_LOWER] = LAYOUT(
  //,-----------------------------------------.                ,-----------------------------------------.
        KC_ESC, XXXXXXX,  KC_PGDN,  KC_PSCR,  KC_PGUP,  KC_LBRC,                   KC_RBRC,     KC_7,     KC_8,     KC_9, XXXXXXX, XXXXXXX,
  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
      XXXXXXX, KC_LCTRL,  KC_PLUS,  KC_MINS,   KC_EQL,  KC_LPRN,                   KC_RPRN,     KC_4,     KC_5,     KC_6, KC_RCTRL, XXXXXXX,
  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
      XXXXXXX,  KC_LSFT,  KC_HOME, XXXXXXX,   KC_END,  KC_LCBR,                   KC_RCBR,     KC_1,     KC_2,     KC_3,  KC_RSFT, XXXXXXX,
  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
                                  KC_LOWER,   KC_SPC,  KC_SCRL,    KC_MBTN1,   KC_ENT,     KC_0
                              //`--------------------'  `--------------------'
  ),

  [_RAISE] = LAYOUT(
  //,-----------------------------------------.                ,-----------------------------------------.
        KC_ESC, XXXXXXX,    KC_F7,    KC_F8,    KC_F9,   KC_F10,                   KC_BTN2,  KC_BTN2,  KC_MNXT,  KC_MPRV,  KC_MPLY,  KC_MSTP,
  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
      XXXXXXX, KC_LCTRL,    KC_F4,    KC_F5,    KC_F6,   KC_F11,                   KC_LEFT,  KC_DOWN,    KC_UP, KC_RIGHT, KC_RCTRL, XXXXXXX,
  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
      XXXXXXX,  KC_LSFT,    KC_F1,    KC_F2,    KC_F3,   KC_F12,                  XXXXXXX, XXXXXXX,  KC_VOLU,  KC_VOLD,  KC_MUTE,  KC_RSFT,
  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
                                  KC_LOWER,   KC_SPC,  KC_SCRL,    KC_MBTN1,   KC_ENT, KC_RAISE
                              //`--------------------'  `--------------------'
  ),

  [_ADJUST] = LAYOUT(
  //,-----------------------------------------.                ,-----------------------------------------.
        KC_RST,  KC_LRST, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,                  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,   KC_RST,
  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
       KC_LTOG,  KC_LHUI,  KC_LSAI,  KC_LVAI, XXXXXXX, XXXXXXX,                  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
  //|------+------+------+------+------+------|                |------+------+------+------+------+------|
       KC_LMOD,  KC_LHUD,  KC_LSAD,  KC_LVAD, XXXXXXX, XXXXXXX,                  XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
  //|------+------+------+------+------+------+------|  |------+------+------+------+------+------+------|
                                  KC_LOWER,   KC_SPC,  KC_SCRL,    KC_MBTN1,   KC_ENT, KC_RAISE
                              //`--------------------'  `--------------------'
  )
};

int RGB_current_mode;

void persistent_default_layer_set(uint16_t default_layer) {
  eeconfig_update_default_layer(default_layer);
  default_layer_set(default_layer);
}

// Setting ADJUST layer RGB back to default
void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
  if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
    layer_on(layer3);
  } else {
    layer_off(layer3);
  }
}

void matrix_init_user(void) {
    #ifdef RGBLIGHT_ENABLE
      RGB_current_mode = rgblight_config.mode;
    #endif
    //SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
    #ifdef SSD1306OLED
        iota_gfx_init();   // turns on the display
    #endif
}

//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED

// When add source files to SRC in rules.mk, you can use functions.
const char *read_layer_state(void);
const char *read_logo(void);
void set_keylog(uint16_t keycode, keyrecord_t *record);
const char *read_keylog(void);
const char *read_keylogs(void);

void matrix_scan_user(void) {
   iota_gfx_task();
}

void matrix_render_user(struct CharacterMatrix *matrix) {
  if (is_keyboard_master()) {
    // If you want to change the display of OLED, you need to change here
    matrix_write(matrix, read_layer_state());
    matrix_write(matrix, "\n");
    matrix_write(matrix, read_keylog());
    matrix_write(matrix, "\n");
    matrix_write(matrix, read_keylogs());
    matrix_write(matrix, "\n");
  } else {
    matrix_write(matrix, read_logo());
  }
}

void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
  if (memcmp(dest->display, source->display, sizeof(dest->display))) {
    memcpy(dest->display, source->display, sizeof(dest->display));
    dest->dirty = true;
  }
}

void iota_gfx_task_user(void) {
  struct CharacterMatrix matrix;
  matrix_clear(&matrix);
  matrix_render_user(&matrix);
  matrix_update(&display, &matrix);
}
#endif//SSD1306OLED

bool process_record_user(uint16_t keycode, keyrecord_t *record) {
  if (record->event.pressed) {
#ifdef SSD1306OLED
    set_keylog(keycode, record);
#endif
  }

  switch (keycode) {
    case QWERTY:
      if (record->event.pressed) {
        persistent_default_layer_set(1UL<<_QWERTY);
      }
      return false;
    case LOWER:
      if (record->event.pressed) {
        layer_on(_LOWER);
        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
      } else {
        layer_off(_LOWER);
        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
      }
      return false;
    case RAISE:
      if (record->event.pressed) {
        layer_on(_RAISE);
        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
      } else {
        layer_off(_RAISE);
        update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
      }
      return false;
    case RGB_MOD:
      #ifdef RGBLIGHT_ENABLE
        if (record->event.pressed) {
          rgblight_mode(RGB_current_mode);
          rgblight_step();
          RGB_current_mode = rgblight_config.mode;
        }
      #endif
      return false;
    case RGBRST:
      #ifdef RGBLIGHT_ENABLE
        if (record->event.pressed) {
          eeconfig_update_rgblight_default();
          rgblight_enable();
          RGB_current_mode = rgblight_config.mode;
        }
      #endif
      break;
  }
  return true;
}