Backlight: add defines for default level and breathing state (#12560)

docs/feature_backlight.md

@@ -63,7 +63,7 @@ Valid driver values are `pwm`, `software`, `custom` or `no`. See below for help
 To configure the backlighting, `#define` these in your `config.h`:
 
 |Define                       |Default           |Description                                                                                                      |
-|------------------------|---------------|-------------------------------------------------------------------------------------------------------------------|
+|-----------------------------|------------------|-----------------------------------------------------------------------------------------------------------------|
 |`BACKLIGHT_PIN`              |*Not defined*     |The pin that controls the LED(s)                                                                                 |
 |`BACKLIGHT_LEVELS`           |`3`               |The number of brightness levels (maximum 31 excluding off)                                                       |
 |`BACKLIGHT_CAPS_LOCK`        |*Not defined*     |Enable Caps Lock indicator using backlight (for keyboards without dedicated LED)                                 |
@@ -71,6 +71,8 @@ To configure the backlighting, `#define` these in your `config.h`:
 |`BREATHING_PERIOD`           |`6`               |The length of one backlight "breath" in seconds                                                                  |
 |`BACKLIGHT_ON_STATE`         |`1`               |The state of the backlight pin when the backlight is "on" - `1` for high, `0` for low                            |
 |`BACKLIGHT_LIMIT_VAL`        |`255`             |The maximum duty cycle of the backlight -- `255` allows for full brightness, any lower will decrease the maximum.|
+|`BACKLIGHT_DEFAULT_LEVEL`    |`BACKLIGHT_LEVELS`|The default backlight level to use upon clearing the EEPROM                                                      |
+|`BACKLIGHT_DEFAULT_BREATHING`|*Not defined*     |Whether to enable backlight breathing upon clearing the EEPROM                                                   |
 
 Unless you are designing your own keyboard, you generally should not need to change the `BACKLIGHT_PIN` or `BACKLIGHT_ON_STATE`.
 

quantum/backlight/backlight.c

@@ -22,6 +22,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 backlight_config_t backlight_config;
 
+#ifndef BACKLIGHT_DEFAULT_LEVEL
+#    define BACKLIGHT_DEFAULT_LEVEL BACKLIGHT_LEVELS
+#endif
+
 #ifdef BACKLIGHT_BREATHING
 // TODO: migrate to backlight_config_t
 static uint8_t breathing_period = BREATHING_PERIOD;
@@ -35,6 +39,7 @@ void backlight_init(void) {
     /* check signature */
     if (!eeconfig_is_enabled()) {
         eeconfig_init();
+        eeconfig_update_backlight_default();
     }
     backlight_config.raw = eeconfig_read_backlight();
     if (backlight_config.level > BACKLIGHT_LEVELS) {
@@ -152,11 +157,23 @@ void backlight_level(uint8_t level) {
     eeconfig_update_backlight(backlight_config.raw);
 }
 
-/** \brief Update current backlight state to EEPROM
+uint8_t eeconfig_read_backlight(void) { return eeprom_read_byte(EECONFIG_BACKLIGHT); }
- *
+
- */
+void eeconfig_update_backlight(uint8_t val) { eeprom_update_byte(EECONFIG_BACKLIGHT, val); }
+
 void eeconfig_update_backlight_current(void) { eeconfig_update_backlight(backlight_config.raw); }
 
+void eeconfig_update_backlight_default(void) {
+    backlight_config.enable = 1;
+#ifdef BACKLIGHT_DEFAULT_BREATHING
+    backlight_config.breathing = 1;
+#else
+    backlight_config.breathing = 0;
+#endif
+    backlight_config.level = BACKLIGHT_DEFAULT_LEVEL;
+    eeconfig_update_backlight(backlight_config.raw);
+}
+
 /** \brief Get backlight level
  *
  * FIXME: needs doc

quantum/backlight/backlight.h

@@ -55,7 +55,11 @@ void    backlight_decrease(void);
 void    backlight_level_noeeprom(uint8_t level);
 void    backlight_level(uint8_t level);
 uint8_t get_backlight_level(void);
+
+uint8_t eeconfig_read_backlight(void);
+void    eeconfig_update_backlight(uint8_t val);
 void    eeconfig_update_backlight_current(void);
+void    eeconfig_update_backlight_default(void);
 
 // implementation specific
 void backlight_init_ports(void);

tmk_core/common/eeconfig.c

@@ -155,17 +155,6 @@ void eeconfig_update_keymap(uint16_t val) {
     eeprom_update_byte(EECONFIG_KEYMAP_UPPER_BYTE, (val >> 8) & 0xFF);
 }
 
-/** \brief eeconfig read backlight
- *
- * FIXME: needs doc
- */
-uint8_t eeconfig_read_backlight(void) { return eeprom_read_byte(EECONFIG_BACKLIGHT); }
-/** \brief eeconfig update backlight
- *
- * FIXME: needs doc
- */
-void eeconfig_update_backlight(uint8_t val) { eeprom_update_byte(EECONFIG_BACKLIGHT, val); }
-
 /** \brief eeconfig read audio
  *
  * FIXME: needs doc

tmk_core/common/eeconfig.h

@@ -94,11 +94,6 @@ void    eeconfig_update_default_layer(uint8_t val);
 uint16_t eeconfig_read_keymap(void);
 void     eeconfig_update_keymap(uint16_t val);
 
-#ifdef BACKLIGHT_ENABLE
-uint8_t eeconfig_read_backlight(void);
-void    eeconfig_update_backlight(uint8_t val);
-#endif
-
 #ifdef AUDIO_ENABLE
 uint8_t eeconfig_read_audio(void);
 void    eeconfig_update_audio(uint8_t val);