diff --git a/keyboards/handwired/jotanck/config.h b/keyboards/handwired/jotanck/config.h new file mode 100644 index 000000000..7e022eeb0 --- /dev/null +++ b/keyboards/handwired/jotanck/config.h @@ -0,0 +1,37 @@ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Jotix +#define PRODUCT Jotanck +#define DESCRIPTION A Jotantastic compact ortholinear keyboard + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* pro_micro pin-out */ +#define MATRIX_ROW_PINS { B4, B5, B6, B2 } +#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, D3, D2, D1, D0, D4, C6 } +#define UNUSED_PINS + +/* leds */ +#define QMK_LED E6 +#define BACKLIGHT_LEVELS 3 +#define BACKLIGHT_PIN B7 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCING_DELAY 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE diff --git a/keyboards/handwired/jotanck/jotanck.c b/keyboards/handwired/jotanck/jotanck.c new file mode 100644 index 000000000..7744570b2 --- /dev/null +++ b/keyboards/handwired/jotanck/jotanck.c @@ -0,0 +1,6 @@ +#include "jotanck.h" + +void matrix_init_kb(void) { + + matrix_init_user(); +} diff --git a/keyboards/handwired/jotanck/jotanck.h b/keyboards/handwired/jotanck/jotanck.h new file mode 100644 index 000000000..e8dd93eda --- /dev/null +++ b/keyboards/handwired/jotanck/jotanck.h @@ -0,0 +1,17 @@ +#pragma once + +#include "quantum.h" + + +#define LAYOUT_ortho_4x12( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ + { k30, k31, k32, k33, k34, k35, k35, k37, k38, k39, k3a, k3b } \ +} diff --git a/keyboards/handwired/jotanck/keymaps/default/keymap.c b/keyboards/handwired/jotanck/keymaps/default/keymap.c new file mode 100644 index 000000000..77c144890 --- /dev/null +++ b/keyboards/handwired/jotanck/keymaps/default/keymap.c @@ -0,0 +1,115 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include QMK_KEYBOARD_H + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. + +#define _QWERTY 0 +#define _LOWER 1 +#define _RAISE 2 +#define _ADJUST 3 + +enum planck_keycodes { + BACKLIT = SAFE_RANGE +}; + +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+ + * | esc | Q | W | E | R | T | Y | U | I | O | P | bksp | + * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+ + * | tab | A | S | D | F | G | H | J | K | L | ; | ' | + * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+ + * | lshift | Z | X | C | V | B | N | M | , | . | / | enter | + * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+ + * |backlit | lctrl | lgui | lalt | lower | space | space | raise | left | down | up | right | + * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+ + */ +[_QWERTY] = LAYOUT_ortho_4x12 ( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, + BACKLIT, KC_LCTL, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* Lower + * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+ + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | | + * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+ + * | | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+ + * | | F7 | F8 | F9 | F10 | F11 | F12 | | | | | | + * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+ + * | | | | | | | | | | | | | + * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+ + */ +[_LOWER] = LAYOUT_ortho_4x12 ( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +), + +/* Raise + * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+ + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | del | + * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+ + * | | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+ + * | | F7 | F8 | F9 | F10 | F11 | F12 | | | | | | + * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+ + * | | | | | | | | | home | home | pgdn | end | + * +--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+ + */ +[_RAISE] = LAYOUT_ortho_4x12 ( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END +), + +[_ADJUST] = LAYOUT_ortho_4x12 ( + _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +), +}; + +uint32_t layer_state_set_user(uint32_t state) { + return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); +} + +void matrix_init_user(void) { +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + + default: + return true; + + } +} diff --git a/keyboards/handwired/jotanck/readme.md b/keyboards/handwired/jotanck/readme.md new file mode 100644 index 000000000..41b0ea401 --- /dev/null +++ b/keyboards/handwired/jotanck/readme.md @@ -0,0 +1,38 @@ +# Jotanck + +![Jotanck](https://i.imgur.com/bBfO4L2.jpg) + +A compact 40% (12x4) ortholinear keyboard kit inspired in the Planck made by jotix. + +Keyboard Maintainer: [jotix](https://github.com/jotix) +Hardware Supported: Arduino Pro Micro +Hardware Availability: [Mercado Libre](https://articulo.mercadolibre.com.ar/MLA-771696548-teclado-mecanico-handwired-black-switchs-pbt-keycaps-_JM) + +### Arduino Pro Micro Pinout + +| Rows | 0 | 1 | 2 | 3 | +|-------------|----|----|----|----| +| Arduino pin | 8 | 9 | 10 | 16 | +| QMK pin | B4 | B5 | B6 | B2 | + +| Columns | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | +|-------------|----|----|----|----|----|----|-----|-----|----|----|----|----| +| Arduino pin | A3 | A2 | A1 | A0 | 15 | 14 | TX0 | RXI | 2 | 3 | 4 | 5 | +| QMK pin | F4 | F5 | F6 | F7 | B1 | B3 | D3 | D2 | D1 | D0 | D4 | C6 | + +| | QMK led | Backlight | +|-------------|-----------|-----------| +| Arduino pin | 7 | 6 | +| QMK pin | E6 | D7 | + +### Compiling the Firmware + +Make example for this keyboard (after setting up your build environment): + + make handwired/jotanck:default + +### The Defaukt Keymap + +![Default Keymap](https://i.imgur.com/Fh7g1AQ.jpg) + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/jotanck/rules.mk b/keyboards/handwired/jotanck/rules.mk new file mode 100644 index 000000000..6c3263446 --- /dev/null +++ b/keyboards/handwired/jotanck/rules.mk @@ -0,0 +1,66 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Bootloader +# This definition is optional, and if your keyboard supports multiple bootloaders of +# different sizes, comment this out, and the correct address will be loaded +# automatically (+60). See bootloader.mk for all options. +BOOTLOADER = caterina + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# + +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = no # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +API_SYSEX_ENABLE = no + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +LAYOUTS = ortho_4x12