Add the Speedo keyboard

keyboards/speedo/readme.md

@@ -0,0 +1,23 @@
+# Speedo
+
+![Speedo](https://raw.githubusercontent.com/pcewing/speedo/master/build_log/images/04-03_23-09-56_00.jpg)
+
+#### Keyboard Maintainer
+[Paul Ewing](https://github.com/pcewing)
+
+#### Hardware Supported
+Teensy 2.0
+
+#### Hardware Availability
+You will have to get the plates cut by an online service such as Ponoko. Case files are available in the [Speedo Repository](https://github.com/pcewing/speedo)
+
+## Building the Firmware:
+```
+make speedo:default
+```
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+## Flashing the Firmware
+See the QMK docs for handwiring a keyboard; there is a section with instructions on how to flash the *.hex* file to the Teensy 2.0 controller.
+