alvierahman90/qmk_firmware
Archived
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

2021 May 29 Breaking Changes Update (#13034)

Browse Source 
* Add Per Key functionality for AutoShift (#11536)

* LED Matrix: Reactive effect buffers & advanced indicators (#12588)

* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)

* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)

* LED Matrix: Split (#12633)

* [CI] Format code according to conventions (#12650)

* feat: infinite timeout for leader key (#6580)

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions (#12680)

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)

* Add support for MCU = STM32F446 (#12619)

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions (#12682)

* Format code according to conventions (#12687)

* Add STM32L433 and L443 support (#12063)

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)

* Fix bad PR merge for #6580. (#12721)

* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)

* [CI] Format code according to conventions (#12731)

* Fixing transport's led/rgb matrix suspend state logic (#12770)

* [CI] Format code according to conventions (#12772)

* Fix comment parsing (#12750)

* Added OLED fade out support (#12086)

* fix some references to bin/qmk that slipped in (#12832)

* Resolve a number of warnings in `qmk generate-api` (#12833)

* New command: qmk console (#12828)

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules (#12846)

* Make Swap Hands use PROGMEM (#12284)

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference (#12856)

* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)

* Fixup build errors on `develop` branch. (#12723)

* LED Matrix: Effects! (#12651)

* Fix syntax error when compiling for ARM (#12866)

* Remove KEYMAP and LAYOUT_kc (#12160)

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)

* Rename `point_t` -> `led_point_t` (#12864)

* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)

* Add missing LED Matrix suspend code to suspend.c (#12878)

* LED Matrix: Documentation (#12685)

* Deprecate `send_unicode_hex_string()` (#12602)

* Fix spelling mistake regarding LED Matrix in split_common. (#12888)

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)

* Use milc.subcommand.config instead of qmk.cli.config (#12915)

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer (#12237)

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. (#12933)

* matrix: wait for row signal to go HIGH for every row (#12945)

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases (#12976)

* Add support for up to 4 IS31FL3733 drivers (#12342)

* Convert Encoder callbacks to be boolean functions (#12805)

* [Keyboard] Fix Terrazzo build failure (#12977)

* Do not hard set config in CPTC files (#11864)

* [Keyboard] Corne - Remove legacy revision support (#12226)

* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)

* Add Full-duplex serial driver for ARM boards (#9842)

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)

* Backlight: add defines for default level and breathing state (#12560)

* Add dire message about LUFA mass storage bootloader (#13014)

* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes (#12985)

* `backlight.c`: include `eeprom.h` (#13024)

* Add changelog for 2021-05-29 Breaking Changes merge (#12939)

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only
This commit is contained in:
James Young
2021-05-29 14:38:50 -07:00
committed by GitHub
parent f55e39e8a2
commit 1646c0f26c
1481 changed files with 12654 additions and 20958 deletions
Download Patch File Download Diff File Expand all files Collapse all files

3
keyboards/crkbd/crkbd.c
View File

@@ -20,7 +20,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#ifdef SWAP_HANDS_ENABLE
__attribute__ ((weak))
const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
// Left
{{0, 4}, {1, 4}, {2, 4}, {3, 4}, {4, 4}, {5, 4}},
{{0, 5}, {1, 5}, {2, 5}, {3, 5}, {4, 5}, {5, 5}},
@@ -33,4 +33,3 @@ const keypos_t hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = {
{{0, 3}, {1, 3}, {2, 3}, {3, 3}, {4, 3}, {5, 3}}
};
#endif

67
keyboards/crkbd/keymaps/armand1m/keymap.c
View File

@@ -29,7 +29,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (record->event.pressed) {
SEND_STRING("() => {}");
} else {
SEND_STRING(SS_TAP(X_LEFT) SS_TAP(X_ENTER));
SEND_STRING(SS_TAP(X_LEFT) SS_TAP(X_ENTER));
}
return false;
}
@@ -69,7 +69,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
#ifdef OLED_DRIVER_ENABLE
oled_rotation_t oled_init_user(oled_rotation_t rotation) {
if (!is_master) {
if (!is_keyboard_master()) {
return OLED_ROTATION_180; // flips the display 180 degrees if offhand
}
return rotation;
@@ -93,37 +94,37 @@ void render_bootmagic_status(bool status) {
void oled_render_amsterdam_flag(void) {
// 'Flag_of_Amsterdam', 128x32px
static const char PROGMEM amsterdam_flag[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf8, 0xf8, 0xf0, 0xe0, 0xc0, 0x80, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf8, 0xf8, 0xf0, 0xe0, 0xc0, 0x80, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf0, 0xf8, 0xf8, 0xf0, 0xe0, 0xc0, 0x80,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf8, 0xf8, 0xf0, 0xe0, 0xc0, 0x80,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf8, 0xf8, 0xf0, 0xe0, 0xc0,
0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf8, 0xf8, 0xf8, 0xf0, 0xe0,
0xc0, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff, 0xff, 0xff, 0xff,
0xfe, 0xfc, 0xfc, 0xfe, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x3f, 0x1f, 0x0f, 0x07, 0x03, 0x01, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff, 0xff, 0xff,
0xff, 0xfe, 0xfc, 0xfc, 0xfe, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x3f, 0x1f, 0x0f, 0x07, 0x03, 0x01,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff, 0xff,
0xff, 0xff, 0xfe, 0xfc, 0xfc, 0xfe, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x3f, 0x1f, 0x0f, 0x07, 0x03,
0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf8, 0xfc, 0xfe, 0xff, 0xff, 0xff, 0xff, 0x7f,
0x3f, 0x3f, 0x3f, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xfe, 0xfc, 0xf8, 0xf0, 0xe0, 0xc0, 0x80, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xe0, 0xf0, 0xf8, 0xfc, 0xfe, 0xff, 0xff, 0xff,
0xff, 0x7f, 0x3f, 0x3f, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xfe, 0xfc, 0xf8, 0xf0, 0xe0, 0xc0, 0x80,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf8, 0xfc, 0xfe, 0xff, 0xff,
0xff, 0xff, 0x7f, 0x3f, 0x1f, 0x3f, 0x7f, 0xff, 0xff, 0xff, 0xfe, 0xfc, 0xfc, 0xf8, 0xf0, 0xe0,
0xc0, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x0f, 0x0f, 0x1f, 0x0f, 0x07, 0x03, 0x01, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x1f, 0x0f, 0x07, 0x03, 0x01, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x0f, 0x07, 0x03, 0x01, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x1f, 0x0f, 0x07, 0x03, 0x01,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x1f, 0x0f, 0x07, 0x03,
0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x0f, 0x07, 0x03,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf8, 0xf8, 0xf0, 0xe0, 0xc0, 0x80, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf8, 0xf8, 0xf0, 0xe0, 0xc0, 0x80, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf0, 0xf8, 0xf8, 0xf0, 0xe0, 0xc0, 0x80,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf8, 0xf8, 0xf0, 0xe0, 0xc0, 0x80,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf8, 0xf8, 0xf0, 0xe0, 0xc0,
0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf8, 0xf8, 0xf8, 0xf0, 0xe0,
0xc0, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff, 0xff, 0xff, 0xff,
0xfe, 0xfc, 0xfc, 0xfe, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x3f, 0x1f, 0x0f, 0x07, 0x03, 0x01, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff, 0xff, 0xff,
0xff, 0xfe, 0xfc, 0xfc, 0xfe, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x3f, 0x1f, 0x0f, 0x07, 0x03, 0x01,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff, 0xff,
0xff, 0xff, 0xfe, 0xfc, 0xfc, 0xfe, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x3f, 0x1f, 0x0f, 0x07, 0x03,
0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf8, 0xfc, 0xfe, 0xff, 0xff, 0xff, 0xff, 0x7f,
0x3f, 0x3f, 0x3f, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xfe, 0xfc, 0xf8, 0xf0, 0xe0, 0xc0, 0x80, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xe0, 0xf0, 0xf8, 0xfc, 0xfe, 0xff, 0xff, 0xff,
0xff, 0x7f, 0x3f, 0x3f, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xfe, 0xfc, 0xf8, 0xf0, 0xe0, 0xc0, 0x80,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0xe0, 0xf0, 0xf8, 0xfc, 0xfe, 0xff, 0xff,
0xff, 0xff, 0x7f, 0x3f, 0x1f, 0x3f, 0x7f, 0xff, 0xff, 0xff, 0xfe, 0xfc, 0xfc, 0xf8, 0xf0, 0xe0,
0xc0, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x0f, 0x0f, 0x1f, 0x0f, 0x07, 0x03, 0x01, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x1f, 0x0f, 0x07, 0x03, 0x01, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x0f, 0x07, 0x03, 0x01, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x1f, 0x0f, 0x07, 0x03, 0x01,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x1f, 0x0f, 0x07, 0x03,
0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x0f, 0x1f, 0x0f, 0x07, 0x03,
0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
};
oled_write_raw_P(amsterdam_flag, sizeof(amsterdam_flag));

5
keyboards/crkbd/keymaps/default/keymap.c
View File

@@ -17,6 +17,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
#include <stdio.h>
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT_split_3x6_3(
@@ -71,7 +72,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
#ifdef OLED_DRIVER_ENABLE
oled_rotation_t oled_init_user(oled_rotation_t rotation) {
if (!is_master) {
if (!is_keyboard_master()) {
return OLED_ROTATION_180; // flips the display 180 degrees if offhand
}
return rotation;
@@ -157,7 +158,7 @@ void oled_render_logo(void) {
}
void oled_task_user(void) {
if (is_master) {
if (is_keyboard_master()) {
oled_render_layer_state();
oled_render_keylog();
} else {

15
keyboards/crkbd/keymaps/dsanchezseco/keymap.c
View File

@@ -1,15 +1,10 @@
#include QMK_KEYBOARD_H
#include "split_util.h"
extern keymap_config_t keymap_config;
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
#endif
extern uint8_t is_master;
#define LOWER MO(_LOWER)
#define RAISE MO(_RAISE)
#define ESC_CTL LCTL_T(KC_ESC)
@@ -26,7 +21,7 @@ enum crkbd_layers {
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_DVORAK] = LAYOUT( \
[_DVORAK] = LAYOUT_split_3x6_3( \
//,-----------------------------------------------. ,-----------------------------------------------.
KC_TAB, KC_QUOT,KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH,\
//|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
@@ -39,7 +34,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
),
[_LOWER] = LAYOUT( \
[_LOWER] = LAYOUT_split_3x6_3( \
//,-----------------------------------------------. ,-----------------------------------------------.
KC_TILD,KC_EXLM, KC_AT, KC_HASH, KC_DLR,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RIGHT,KC_RPRN,\
//|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
@@ -51,7 +46,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//`-----------------------' `----------------------'
),
[_RAISE] = LAYOUT( \
[_RAISE] = LAYOUT_split_3x6_3( \
//,-----------------------------------------------. ,-----------------------------------------------.
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9,KC_RIGHT, KC_0, \
//|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
@@ -63,7 +58,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//`-----------------------' `----------------------'
),
[_ADJUST] = LAYOUT( \
[_ADJUST] = LAYOUT_split_3x6_3( \
//,-----------------------------------------------. ,-----------------------------------------------.
RGB_TOG,RGB_HUI,RGB_SAI,RGB_VAI,_______,RGB_M_T, _______,_______,_______,_______,KC_RIGHT,_______,\
//|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
@@ -82,7 +77,7 @@ uint32_t layer_state_set_user(uint32_t state) {
#ifdef OLED_DRIVER_ENABLE
oled_rotation_t oled_init_user(oled_rotation_t rotation) {
if (!isLeftHand)
if (!is_keyboard_left())
return OLED_ROTATION_180; // flips the display 180 to see it from my side
return rotation;
}

8
keyboards/crkbd/keymaps/gotham/keymap.c
View File

@@ -11,7 +11,7 @@
// clang-format off
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT(
[_QWERTY] = LAYOUT_split_3x6_3(
//|-----------------------------------------------------| |-----------------------------------------------------|
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
@@ -25,7 +25,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
),
[_LOWER] = LAYOUT(
[_LOWER] = LAYOUT_split_3x6_3(
//|-----------------------------------------------------| |-----------------------------------------------------|
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
@@ -37,7 +37,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//|--------------------------| |--------------------------|
),
[_RAISE] = LAYOUT(
[_RAISE] = LAYOUT_split_3x6_3(
//|-----------------------------------------------------| |-----------------------------------------------------|
KC_ESC, KC_HASH, KC_DLR, KC_LCBR, KC_RCBR, XXXXXXX, XXXXXXX, KC_AMPR, KC_PIPE, KC_EXLM, KC_ASTR, XXXXXXX,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
@@ -49,7 +49,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//|--------------------------| |--------------------------|
),
[_ADJUST] = LAYOUT(
[_ADJUST] = LAYOUT_split_3x6_3(
//|-----------------------------------------------------| |-----------------------------------------------------|
XXXXXXX, CK_RST, CK_DOWN, CK_UP, CK_TOGG, RGB_TOG, MU_TOG, KC_F12, KC_F7, KC_F8, KC_F9, XXXXXXX,\
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|

2
keyboards/crkbd/keymaps/gotham/oled.c
View File

@@ -257,7 +257,7 @@ void oled_task_user(void) {
}
#endif
if (is_master) {
if (is_keyboard_master()) {
render_status_main();
} else {
render_status_secondary();

2
keyboards/crkbd/keymaps/hvp/config.h
View File

@@ -29,6 +29,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define EE_HANDS
#define SSD1306OLED
#define USE_SSD_I2C
#define USE_SERIAL_PD2

40
keyboards/crkbd/keymaps/hvp/keymap.c
View File

@@ -1,13 +1,15 @@
#include QMK_KEYBOARD_H
#include "hvp.c"
#ifdef SSD1306OLED
# include "ssd1306.h"
# include <string.h>
#endif
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
#endif
extern uint8_t is_master;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
@@ -25,7 +27,7 @@ enum custom_keycodes {
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT(
[_QWERTY] = LAYOUT_split_3x6_3(
//,-----------------------------------------. ,-----------------------------------------.
LT(_ADJUST,KC_TAB), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_BSPC,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
@@ -33,35 +35,35 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//|------+------+------+------+------+------| |------+------+------+------+------+------|
KC_LCTL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM,KC_DOT,TD(TD3),KC_SFTENT,
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
KC_LGUI, LT(1,KC_SPC),MT(MOD_LSFT, KC_SPC), MT(MOD_LSFT,KC_ENT), LT(2,KC_SPC),KC_LALT
KC_LGUI, LT(1,KC_SPC),MT(MOD_LSFT, KC_SPC), MT(MOD_LSFT,KC_ENT), LT(2,KC_SPC),KC_LALT
//`--------------------' `--------------------'
),
[_RAISE] = LAYOUT(
[_RAISE] = LAYOUT_split_3x6_3(
//,-----------------------------------------. ,-----------------------------------------.
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_BSPC,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
KC_DEL, _______, _______, _______, _______, _______, _______,KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
KC_LCTL, _______, _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
KC_LCTL, _______, _______, _______, _______, _______, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
_______, _______, _______, _______, _______, _______
_______, _______, _______, _______, _______, _______
//`--------------------' `--------------------'
),
[_LOWER] = LAYOUT(
[_LOWER] = LAYOUT_split_3x6_3(
//,-----------------------------------------. ,-----------------------------------------.
KC_TAB,KC_EXLM,KC_AT,KC_HASH,KC_DLR,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_BSPC,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
KC_DEL, _______, _______, _______, _______, _______, _______,KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_BSLS,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
KC_LCTL, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_TILD,
KC_LCTL, _______, _______, _______, _______, _______, _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_TILD,
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
_______, _______, _______, _______, _______, _______
_______, _______, _______, _______, _______, _______
//`--------------------' `--------------------'
),
[_ADJUST] = LAYOUT(
[_ADJUST] = LAYOUT_split_3x6_3(
//,-----------------------------------------. ,-----------------------------------------.
_______,KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
@@ -69,12 +71,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//|------+------+------+------+------+------| |------+------+------+------+------+------|
RESET,KC_PSCR,_______,_______,_______,_______, KC_HOME, KC_PGDN, KC_PGUP, KC_END, _______, _______,
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
_______, KC_VOLD,KC_MPLY, KC_MNXT, KC_VOLU,_______
_______, KC_VOLD,KC_MPLY, KC_MNXT, KC_VOLU,_______
//`--------------------' `--------------------'
)
};
int RGB_current_mode;
int RGB_current_mode;
// Setting ADJUST layer RGB back to default
void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
@@ -91,7 +93,7 @@ void matrix_init_user(void) {
#endif
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
iota_gfx_init(!has_usb()); // turns on the display
iota_gfx_init(); // turns on the display
#endif
}
@@ -115,10 +117,10 @@ void matrix_scan_user(void) {
}
void matrix_render_user(struct CharacterMatrix *matrix) {
if (is_master) {
if (is_keyboard_master()) {
// If you want to change the display of OLED, you need to change here
matrix_write_ln(matrix, read_layer_state());
matrix_write_ln(matrix, read_keylog());
matrix_write(matrix, read_layer_state());
matrix_write(matrix, read_keylog());
//matrix_write_ln(matrix, read_keylogs());
//matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
//matrix_write_ln(matrix, read_host_led_state());
@@ -180,4 +182,4 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
break;
}
return true;
}
}

5
keyboards/crkbd/keymaps/hvp/rules.mk
View File

@@ -1,4 +1,7 @@
VPATH += keyboards/crkbd/lib
LIB_SRC += ssd1306.c i2c.c
# If you want to change the display of OLED, you need to change here
SRC += ./lib/glcdfont.c \
./lib/rgb_state_reader.c \
@@ -11,4 +14,4 @@ SRC += ./lib/glcdfont.c \
TAP_DANCE_ENABLE = yes
EXTRAKEY_ENABLE = yes # Audio control and System control
# LOCAL_GLCDFONT = yes
# LOCAL_GLCDFONT = yes

1
keyboards/crkbd/keymaps/jarred/config.h
View File

@@ -29,6 +29,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define EE_HANDS
#define SSD1306OLED
#define USE_SSD_I2C
#define USE_SERIAL_PD2

33
keyboards/crkbd/keymaps/jarred/keymap.c
View File

@@ -9,8 +9,6 @@
#include "ssd1306.h"
#endif
extern keymap_config_t keymap_config;
extern uint8_t is_master;
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
@@ -24,7 +22,7 @@ extern rgblight_config_t rgblight_config;
K31, K32, K33, K34, K35, K36 \
)
#define LAYOUT_crkbd_wrapper(...) LAYOUT(__VA_ARGS__)
#define LAYOUT_crkbd_wrapper(...) LAYOUT_split_3x6_3(__VA_ARGS__)
#define QWERTY_4_CRKBD KC_LCTL, MO(_LW), KC_SPC, KC_ENT, MO(_LW), KC_RALT
@@ -37,28 +35,28 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
QWERTY_3_12,
QWERTY_4_DOX
),
[_LW] = LAYOUT_crkbd_wrapper(
LOWER_1_12,
LOWER_2_12,
LOWER_3_12,
LOWER_4_DOX
),
[_NV] = LAYOUT_crkbd_wrapper(
NAV_1_12,
NAV_2_12,
NAV_3_12,
NAV_4_DOX
),
[_NP] = LAYOUT_crkbd_wrapper(
NUMPAD_1_12,
NUMPAD_2_12,
NUMPAD_3_12,
NUMPAD_4_DOX
),
[_MS] = LAYOUT_crkbd_wrapper(
MOUSE_1_12,
MOUSE_2_12,
@@ -70,7 +68,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
void matrix_init_user(void) {
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
iota_gfx_init(!has_usb()); // turns on the display
iota_gfx_init(); // turns on the display
#endif
}
@@ -87,9 +85,9 @@ char matrix_line_str[24];
const char *read_layer_state(void) {
uint8_t layer = biton32(layer_state);
strcpy(matrix_line_str, "Layer: ");
switch (layer)
{
case _QW:
@@ -115,9 +113,9 @@ const char *read_layer_state(void) {
}
const char *read_usb_state(void) {
strcpy(matrix_line_str, "USB : ");
switch (USB_DeviceState) {
case DEVICE_STATE_Unattached:
strcat(matrix_line_str, "Unattached");
@@ -149,10 +147,13 @@ void matrix_scan_user(void) {
}
void matrix_render_user(struct CharacterMatrix *matrix) {
if (is_master) {
matrix_write_ln(matrix, read_layer_state());
matrix_write_ln(matrix, read_usb_state());
matrix_write_ln(matrix, read_keylogs());
if (is_keyboard_master()) {
matrix_write(matrix, read_layer_state());
matrix_write(matrix, "\n");
matrix_write(matrix, read_usb_state());
matrix_write(matrix, "\n");
matrix_write(matrix, read_keylogs());
matrix_write(matrix, "\n");
} else {
matrix_write(matrix, read_logo());
}

5
keyboards/crkbd/keymaps/jarred/rules.mk
View File

@@ -14,7 +14,7 @@ MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
SWAP_HANDS_ENABLE = no # Enable one-hand typing
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
@@ -29,3 +29,6 @@ SRC += ./lib/glcdfont.c \
# ./lib/mode_icon_reader.c \
# ./lib/host_led_state_reader.c \
# ./lib/timelogger.c \
VPATH += keyboards/crkbd/lib
LIB_SRC += ssd1306.c i2c.c

3
keyboards/crkbd/keymaps/kidbrazil/config.h
View File

@@ -29,7 +29,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define MASTER_RIGHT
// #define EE_HANDS
//#define SSD1306OLED
#define SSD1306OLED
#define USE_SSD_I2C
#define USE_SERIAL_PD2

18
keyboards/crkbd/keymaps/kidbrazil/keymap.c
View File

@@ -1,9 +1,9 @@
#include QMK_KEYBOARD_H
#include "enums.h"
#include "layer.h"
#include "lufa.h"
// [Init Variables] ----------------------------------------------------------//
extern uint8_t is_master;
// Oled timer similar to Drashna's
static uint32_t oled_timer = 0;
// Boolean to store LED state
@@ -13,35 +13,35 @@ bool master_oled_cleared = false;
// [Keymaps] -----------------------------------------------------------------//
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT(
[_QWERTY] = LAYOUT_split_3x6_3(
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
LSFT_T(KC_TAB), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
KC_LCTL, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
LGUI_T(KC_PGUP), MO(_NUM), KC_SPC, KC_ENT, MO(_SYM), LALT_T(KC_PGDN)
),
[_NUM] = LAYOUT(
[_NUM] = LAYOUT_split_3x6_3(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL,
LSFT_T(KC_TAB), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_F12, KC_NO,
KC_LCTL, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_PGUP, KC_PGDN, KC_HOME, KC_END, KC_F11, KC_NO,
LGUI_T(KC_PGUP), KC_TRNS, KC_SPC, KC_ENT, KC_TRNS, LALT_T(KC_PGDN)
),
[_SYM] = LAYOUT(
[_SYM] = LAYOUT_split_3x6_3(
KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
LSFT_T(KC_TAB), RGB_TOG, KC_MPLY, KC_MUTE, KC_VOLU, KC_VOLD, KC_MINS, KC_EQL, KC_LCBR, KC_RCBR, KC_PIPE, KC_GRV,
KC_LCTL, KC_CALC, KC_MYCM, KC_MPRV, KC_MNXT, TG(_GAME), KC_UNDS, KC_PLUS, KC_LBRC, KC_RBRC, KC_BSLS, KC_TILD,
LGUI_T(KC_PGUP), KC_TRNS, KC_SPC, KC_ENT, KC_TRNS, LALT_T(KC_PGDN)
),
[_GAME] = LAYOUT(
[_GAME] = LAYOUT_split_3x6_3(
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6,
KC_LSFT, KC_A, KC_S, KC_D, KC_F, KC_G, KC_F7, KC_F8, KC_F9, KC_F10, KC_NO, KC_NO,
KC_LCTL, KC_Z, KC_X, KC_C, KC_V, KC_TRNS, KC_PGUP, KC_PGDN, KC_NO, KC_NO, KC_NO, KC_NO,
KC_TAB, MO(_WEAPON), KC_SPC, KC_ENT, KC_TRNS, KC_NO
),
[_WEAPON] = LAYOUT(
[_WEAPON] = LAYOUT_split_3x6_3(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_LSFT, KC_A, KC_S, KC_D, KC_F, KC_6, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_LCTL, KC_Z, KC_X, KC_C, KC_V, KC_7, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, EEP_RST,
@@ -128,7 +128,7 @@ void matrix_scan_user(void) {
#ifdef OLED_DRIVER_ENABLE
// Init Oled and Rotate....
oled_rotation_t oled_init_user(oled_rotation_t rotation) {
if (!has_usb())
if (!is_keyboard_master())
return OLED_ROTATION_180; // flips the display 180 to see it from my side
return rotation;
}
@@ -176,7 +176,7 @@ void oled_task_user(void) {
// First time out switches to logo as first indication of iddle.
if (timer_elapsed32(oled_timer) > 100000 && timer_elapsed32(oled_timer) < 479999) {
// Render logo on both halves before full timeout
if (is_master && !master_oled_cleared) {
if (is_keyboard_master() && !master_oled_cleared) {
// Clear master OLED once so the logo renders properly
oled_clear();
master_oled_cleared = true;
@@ -202,7 +202,7 @@ void oled_task_user(void) {
render_logo();
break;
default:
if (is_master) {
if (is_keyboard_master()) {
render_master_oled();
} else {
render_slave_oled();

1
keyboards/crkbd/keymaps/kidbrazil/layer.c
View File

@@ -1,5 +1,6 @@
#include QMK_KEYBOARD_H
#include "enums.h"
#include "lufa.h"
// Render Blank Space
void render_space(void) {

3
keyboards/crkbd/keymaps/kidbrazil/rules.mk
View File

@@ -10,3 +10,6 @@ OLED_DRIVER_ENABLE = yes
# If you want to change the display of OLED, you need to change here
SRC += logo_reader.c \
layer.c
VPATH += keyboards/crkbd/lib
LIB_SRC += ssd1306.c i2c.c

45
keyboards/crkbd/keymaps/like_jis/config.h
View File

@@ -1,45 +0,0 @@
/*
This is the c configuration file for the keymap
Copyright 2012 Jun Wako <wakojun@gmail.com>
Copyright 2015 Jack Humbert
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
//#define USE_MATRIX_I2C
/* Select hand configuration */
#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS
#define SSD1306OLED
#define USE_SERIAL_PD2
#define PREVENT_STUCK_MODIFIERS
#define TAPPING_FORCE_HOLD
#define TAPPING_TERM 250
#undef RGBLED_NUM
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 27
#define RGBLIGHT_LIMIT_VAL 120
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17

291
keyboards/crkbd/keymaps/like_jis/keymap.c
View File

@@ -1,291 +0,0 @@
#include QMK_KEYBOARD_H
#include "bootloader.h"
#ifdef PROTOCOL_LUFA
#include "lufa.h"
#include "split_util.h"
#endif
#ifdef SSD1306OLED
#include "ssd1306.h"
#endif
#include "oled_helper.h"
extern keymap_config_t keymap_config;
extern uint8_t is_master;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
enum layer_number {
_BASE = 0,
_LOWER,
_RAISE,
_ADJUST,
};
enum custom_keycodes {
LOWER = SAFE_RANGE,
RAISE,
ADJUST,
KANJI,
RGBRST
};
enum tapdances{
TD_CODO = 0,
// TD_MNUB,
};
// Layer Mode aliases
#define KC_LOWER LOWER
#define KC_RAISE RAISE
#define KC______ KC_TRNS
#define KC_XXXXX KC_NO
#define KC_KANJI KANJI
#define KC_RST RESET
#define KC_LRST RGBRST
#define KC_LTOG RGB_TOG
#define KC_LHUI RGB_HUI
#define KC_LHUD RGB_HUD
#define KC_LSAI RGB_SAI
#define KC_LSAD RGB_SAD
#define KC_LVAI RGB_VAI
#define KC_LVAD RGB_VAD
#define KC_LMOD RGB_MOD
#define KC_KNRM AG_NORM
#define KC_KSWP AG_SWAP
#define KC_TBSF LSFT_T(KC_TAB)
// #define KC_SPSF LSFT_T(KC_SPC)
#define KC_ALAP LALT_T(KC_APP)
#define KC_CODO TD(TD_CODO)
// #define KC_MNUB TD(TD_MNUB)
qk_tap_dance_action_t tap_dance_actions[] = {
[TD_CODO] = ACTION_TAP_DANCE_DOUBLE(KC_COMM, KC_DOT),
// [TD_MNUB] = ACTION_TAP_DANCE_DOUBLE(KC_MINS, LSFT(KC_RO)),
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_BASE] = LAYOUT_kc( \
//,-----------------------------------------. ,-----------------------------------------.
ESC, Q, W, E, R, T, Y, U, I, O, P, MINS,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
TBSF, A, S, D, F, G, H, J, K, L, UP, ENT,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
LCTRL, Z, X, C, V, B, N, M, CODO, LEFT, DOWN, RGHT,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
LGUI, LOWER, BSPC, SPC, RAISE, ALAP \
//`--------------------' `--------------------'
),
[_LOWER] = LAYOUT_kc( \
//,-----------------------------------------. ,-----------------------------------------.
_____, F1, F2, F3, F4, F5, XXXXX, MINS, EQL, JYEN, LBRC, RBRC,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
_____, F6, F7, F8, F9, F10, XXXXX, XXXXX, XXXXX, SCLN, QUOT, BSLS,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
_____, F11, F12, TAB, KANJI, ENT, XXXXX, XXXXX, COMM, DOT, SLSH, RO,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
_____, _____, DEL, _____, _____, APP \
//`--------------------' `--------------------'
),
[_RAISE] = LAYOUT_kc( \
//,-----------------------------------------. ,-----------------------------------------.
_____, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, PSLS,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
_____, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, QUOT, 4, 5, 6, PPLS, PAST,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
_____, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, 0, 1, 2, 3, DOT, PMNS,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
_____, _____, BSPC, _____, _____, LALT \
//`--------------------' `--------------------'
),
[_ADJUST] = LAYOUT_kc( \
//,-----------------------------------------. ,-----------------------------------------.
_____, RST, LRST, KNRM, KSWP, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
//|------+-------+------+------+------+-----| |------+------+------+------+------+------|
_____, LTOG, LHUI, LSAI, LVAI, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, PGUP, XXXXX,\
//|------+-------+------+------+------+-----| |------+------+------+------+------+------|
_____, LMOD, LHUD, LSAD, LVAD, XXXXX, XXXXX, XXXXX, XXXXX, HOME, PGDN, END,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
_____, _____, XXXXX, _____, _____, XXXXX \
//`--------------------' `--------------------'
)
};
#define L_BASE _BASE
#define L_LOWER (1<<_LOWER)
#define L_RAISE (1<<_RAISE)
#define L_ADJUST (1<<_ADJUST)
#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER)
#ifdef SSD1306OLED
typedef struct {
uint8_t state;
char name[8];
}LAYER_DISPLAY_NAME;
#define LAYER_DISPLAY_MAX 5
const LAYER_DISPLAY_NAME layer_display_name[LAYER_DISPLAY_MAX] = {
{L_BASE, "Base"},
{L_BASE + 1, "Base"},
{L_LOWER, "Lower"},
{L_RAISE, "Raise"},
{L_ADJUST_TRI, "Adjust"}
};
static inline const char* get_leyer_status(void) {
for (uint8_t i = 0; i < LAYER_DISPLAY_MAX; ++i) {
if (layer_state == 0 && layer_display_name[i].state == default_layer_state) {
return layer_display_name[i].name;
} else if (layer_state != 0 && layer_display_name[i].state == layer_state) {
return layer_display_name[i].name;
}
}
return "?";
}
static char layer_status_buf[24] = "Layer state ready.\n";
static inline void update_keymap_status(void) {
snprintf(layer_status_buf, sizeof(layer_status_buf) - 1, "OS:%s Layer:%s\n",
keymap_config.swap_lalt_lgui? "win" : "mac", get_leyer_status());
}
static inline void render_keymap_status(struct CharacterMatrix *matrix) {
matrix_write(matrix, layer_status_buf);
}
#define UPDATE_KEYMAP_STATUS() update_keymap_status()
#define RENDER_KEYMAP_STATUS(a) render_keymap_status(a)
#else
#define UPDATE_KEYMAP_STATUS()
#define RENDER_KEYMAP_STATUS(a)
#endif
static inline void update_change_layer(bool pressed, uint8_t layer1, uint8_t layer2, uint8_t layer3) {
pressed ? layer_on(layer1) : layer_off(layer1);
IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2) ? layer_on(layer3) : layer_off(layer3);
}
int RGB_current_mode;
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
UPDATE_KEY_STATUS(keycode, record);
bool result = false;
switch (keycode) {
case LOWER:
update_change_layer(record->event.pressed, _LOWER, _RAISE, _ADJUST);
break;
case RAISE:
update_change_layer(record->event.pressed, _RAISE, _LOWER, _ADJUST);
break;
case KANJI:
if (record->event.pressed) {
if (keymap_config.swap_lalt_lgui == false) {
register_code(KC_LANG2);
} else {
SEND_STRING(SS_LALT("`"));
}
} else {
unregister_code(KC_LANG2);
}
break;
#ifdef RGBLIGHT_ENABLE
case RGB_MOD:
if (record->event.pressed) {
rgblight_mode(RGB_current_mode);
rgblight_step();
RGB_current_mode = rgblight_config.mode;
}
break;
case RGBRST:
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
RGB_current_mode = rgblight_config.mode;
}
break;
#endif
default:
result = true;
break;
}
UPDATE_KEYMAP_STATUS();
return result;
}
void matrix_init_user(void) {
#ifdef RGBLIGHT_ENABLE
RGB_current_mode = rgblight_config.mode;
UPDATE_KEYMAP_STATUS();
#endif
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
iota_gfx_init(!has_usb()); // turns on the display
#endif
}
//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
void matrix_scan_user(void) {
iota_gfx_task(); // this is what updates the display continuously
}
static inline void matrix_update(struct CharacterMatrix *dest,
const struct CharacterMatrix *source) {
if (memcmp(dest->display, source->display, sizeof(dest->display))) {
memcpy(dest->display, source->display, sizeof(dest->display));
dest->dirty = true;
}
}
static inline void render_status(struct CharacterMatrix *matrix) {
UPDATE_LED_STATUS();
RENDER_LED_STATUS(matrix);
RENDER_KEYMAP_STATUS(matrix);
UPDATE_LOCK_STATUS();
RENDER_LOCK_STATUS(matrix);
RENDER_KEY_STATUS(matrix);
}
void iota_gfx_task_user(void) {
struct CharacterMatrix matrix;
#if DEBUG_TO_SCREEN
if (debug_enable) {
return;
}
#endif
matrix_clear(&matrix);
if (is_master) {
render_status(&matrix);
} else {
RENDER_LOGO(&matrix);
}
matrix_update(&display, &matrix);
}
#endif

83
keyboards/crkbd/keymaps/like_jis/oled_helper.c
View File

@@ -1,83 +0,0 @@
#ifdef SSD1306OLED
#include QMK_KEYBOARD_H
#include "ssd1306.h"
void render_logo(struct CharacterMatrix *matrix) {
const char logo_buf[]={
0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,
0};
matrix_write(matrix, logo_buf);
}
static char keylog_buf[24] = "Key state ready.";
const char code_to_name[60] = {
' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p',
'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z',
'1', '2', '3', '4', '5', '6', '7', '8', '9', '0',
'R', 'E', 'B', 'T', ' ', '-', ' ', '@', ' ', ' ',
' ', ';', ':', ' ', ',', '.', '/', ' ', ' ', ' '};
void update_key_status(uint16_t keycode, keyrecord_t *record) {
if (!record->event.pressed) return;
char name = (keycode < 60) ? code_to_name[keycode] : ' ';
snprintf(keylog_buf, sizeof(keylog_buf) - 1, "Key:%dx%d %2x %c",
record->event.key.row, record->event.key.col,
(uint16_t)keycode, name);
}
void render_key_status(struct CharacterMatrix *matrix) {
matrix_write(matrix, keylog_buf);
}
static char lock_buf[24] = "Lock state ready.\n";
void update_lock_status(void) {
uint8_t leds = host_keyboard_leds();
char *num_lock = (leds & (1<<USB_LED_NUM_LOCK)) ? "Num" : "";
char *caps_lock = (leds & (1<<USB_LED_CAPS_LOCK)) ? "Caps" : "";
char *scrl_lock = (leds & (1<<USB_LED_SCROLL_LOCK)) ? "Scrn" : "";
snprintf(lock_buf, sizeof(lock_buf) - 1, "Lock:%s %s %s\n",
num_lock, caps_lock, scrl_lock);
}
void render_lock_status(struct CharacterMatrix *matrix) {
matrix_write(matrix, lock_buf);
}
#ifdef RGBLIGHT_ENABLE
extern rgblight_config_t rgblight_config;
static char led_buf[24] = "LED state ready.\n";
rgblight_config_t rgblight_config_bak;
void update_led_status(void) {
if (rgblight_config_bak.enable != rgblight_config.enable ||
rgblight_config_bak.mode != rgblight_config.mode ||
rgblight_config_bak.hue != rgblight_config.hue ||
rgblight_config_bak.sat != rgblight_config.sat ||
rgblight_config_bak.val != rgblight_config.val
) {
snprintf(led_buf, sizeof(led_buf) - 1, "LED%c:%2d hsv:%2d %2d %2d\n",
rgblight_config.enable ? '*' : '.', (uint8_t)rgblight_config.mode,
(uint8_t)(rgblight_config.hue / RGBLIGHT_HUE_STEP),
(uint8_t)(rgblight_config.sat / RGBLIGHT_SAT_STEP),
(uint8_t)(rgblight_config.val / RGBLIGHT_VAL_STEP));
rgblight_config_bak = rgblight_config;
}
}
void render_led_status(struct CharacterMatrix *matrix) {
matrix_write(matrix, led_buf);
}
#endif
#endif

35
keyboards/crkbd/keymaps/like_jis/oled_helper.h
View File

@@ -1,35 +0,0 @@
#ifdef SSD1306OLED
void render_logo(struct CharacterMatrix *matrix);
void update_key_status(uint16_t keycode, keyrecord_t *record);
void render_key_status(struct CharacterMatrix *matrix);
void update_lock_status(void);
void render_lock_status(struct CharacterMatrix *matrix);
#define RENDER_LOGO(a) render_logo(a)
#define UPDATE_KEY_STATUS(a, b) update_key_status(a, b)
#define RENDER_KEY_STATUS(a) render_key_status(a)
#define UPDATE_LOCK_STATUS() update_lock_status()
#define RENDER_LOCK_STATUS(a) render_lock_status(a)
#ifdef RGBLIGHT_ENABLE
void update_led_status(void);
void render_led_status(struct CharacterMatrix *matrix);
#define UPDATE_LED_STATUS() update_led_status()
#define RENDER_LED_STATUS(a) render_led_status(a)
#else
#define UPDATE_LED_STATUS()
#define RENDER_LED_STATUS(a)
#endif
#else
#define RENDER_LOGO(a)
#define UPDATE_KEY_STATUS(a, b)
#define RENDER_KEY_STATUS(a)
#define UPDATE_LOCK_STATUS()
#define RENDER_LOCK_STATUS(a)
#define UPDATE_LED_STATUS()
#define RENDER_LED_STATUS(a)
#endif

32
keyboards/crkbd/keymaps/like_jis/rules.mk
View File

@@ -1,32 +0,0 @@
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
SWAP_HANDS_ENABLE = no # Enable one-hand typing
TAP_DANCE_ENABLE = yes
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
Link_Time_Optimization = yes # if firmware size over limit, try this option
ifeq ($(strip $(Link_Time_Optimization)),yes)
EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization
endif
# If you want to change the display of OLED, you need to change here
SRC += ./lib/glcdfont.c \
oled_helper.c \

1
keyboards/crkbd/keymaps/madhatter/config.h
View File

@@ -29,6 +29,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define EE_HANDS
#define SSD1306OLED
#define USE_SSD_I2C
#define USE_SERIAL_PD2

14
keyboards/crkbd/keymaps/madhatter/keymap.c
View File

@@ -17,8 +17,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
extern uint8_t is_master;
#ifdef SSD1306OLED
# include "ssd1306.h"
# include <string.h>
#endif
enum corny_layers {
_QWERTY,
@@ -108,7 +110,7 @@ void matrix_init_user(void) {
#endif
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
iota_gfx_init(!has_usb()); // turns on the display
iota_gfx_init(); // turns on the display
#endif
}
@@ -132,10 +134,10 @@ void matrix_scan_user(void) {
}
void matrix_render_user(struct CharacterMatrix *matrix) {
if (is_master) {
if (is_keyboard_master()) {
// If you want to change the display of OLED, you need to change here
matrix_write_ln(matrix, read_layer_state());
matrix_write_ln(matrix, read_keylog());
matrix_write(matrix, read_layer_state());
matrix_write(matrix, read_keylog());
//matrix_write_ln(matrix, read_keylogs());
//matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
//matrix_write_ln(matrix, read_host_led_state());

3
keyboards/crkbd/keymaps/madhatter/rules.mk
View File

@@ -8,3 +8,6 @@ SRC += ./lib/glcdfont.c \
# ./lib/mode_icon_reader.c \
# ./lib/host_led_state_reader.c \
# ./lib/timelogger.c \
VPATH += keyboards/crkbd/lib
LIB_SRC += ssd1306.c i2c.c

2
keyboards/crkbd/keymaps/manna-harbour_miryoku/config.h
View File

@@ -8,7 +8,7 @@
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \
N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \
) \
LAYOUT( \
LAYOUT_split_3x6_3( \
KC_NO, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, KC_NO, \
KC_NO, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, KC_NO, \
KC_NO, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, KC_NO, \

4
keyboards/crkbd/keymaps/mcrown/oled.c
View File

@@ -113,7 +113,7 @@ inline static char get_ascii(int16_t keycode){
oled_rotation_t oled_init_user(oled_rotation_t rotation){
oled_rotation_t oled_rot=OLED_ROTATION_180;
if(true==is_master){
if(true==is_keyboard_master()){
#ifdef OLED_VERTICAL
oled_rot=OLED_ROTATION_270;
#else
@@ -313,7 +313,7 @@ void oled_task_user(void){
oled_off();
}else{
oled_on();
if(true==is_master){
if(true==is_keyboard_master()){
render_status();
}else{
render_logo();

10
keyboards/crkbd/keymaps/ninjonas/config.h
View File

@@ -34,9 +34,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGB_MATRIX_SAT_STEP 10
#define RGB_MATRIX_VAL_STEP 10
#define RGB_MATRIX_SPD_STEP 10
// #define RGB_MATRIX_KEYPRESSES
// #define RGB_MATRIX_KEYPRESSES
#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
// BEGIN: Disable RGB Effects
//#define DISABLE_RGB_MATRIX_SOLID_COLOR
//#define DISABLE_RGB_MATRIX_ALPHAS_MODS
@@ -82,7 +82,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
// END: RGB_MATRIX_KEYPRESSES
// END: Disable RGB Effects
#endif
#endif
#define OLED_FONT_H "keyboards/crkbd/lib/glcdfont.c"
#define OLED_DISABLE_TIMEOUT
#define OLED_DISABLE_TIMEOUT
#define LAYOUT LAYOUT_split_3x6_3

4
keyboards/crkbd/keymaps/ninjonas/keymap.c
View File

@@ -1,6 +1,8 @@
#include QMK_KEYBOARD_H
#include "ninjonas.h"
uint8_t is_master;
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_wrapper(
//,----------------------------------------------------. ,----------------------------------------------------.
@@ -98,4 +100,4 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//`---------------------' `---------------------'
),
*/
};
};

10
keyboards/crkbd/keymaps/oled_sample/keymap.c
View File

@@ -38,21 +38,21 @@ enum crkbd_layers {
#define ALTKN ALT_T(KC_LANG1)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT(
[_QWERTY] = LAYOUT_split_3x6_3(
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
CTLTB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
GUIEI, LOWER, KC_SPC, KC_ENT, RAISE, ALTKN
),
[_LOWER] = LAYOUT(
[_LOWER] = LAYOUT_split_3x6_3(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
CTLTB, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, XXXXXXX,
KC_LSFT, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, XXXXXXX,
GUIEI, LOWER, KC_SPC, KC_ENT, RAISE, ALTKN
),
[_RAISE] = LAYOUT(
[_RAISE] = LAYOUT_split_3x6_3(
KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
CTLTB, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MINS, KC_EQL, KC_LCBR, KC_RCBR, KC_PIPE, KC_GRV,
KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_UNDS, KC_PLUS, KC_LBRC, KC_RBRC, KC_BSLS, KC_TILD,
@@ -60,7 +60,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
),
[_ADJUST] = LAYOUT(
[_ADJUST] = LAYOUT_split_3x6_3(
RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
@@ -192,7 +192,7 @@ void render_status_main(void) {
void oled_task_user(void) {
update_log();
if (is_master) {
if (is_keyboard_master()) {
render_status_main(); // Renders the current keyboard state (layer, lock, caps, scroll, etc)
} else {
render_crkbd_logo();

51
keyboards/crkbd/keymaps/omgvee/config.h
View File

@@ -1,51 +0,0 @@
/*
This is the c configuration file for the keymap
Copyright 2012 Jun Wako <wakojun@gmail.com>
Copyright 2015 Jack Humbert
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
//#define USE_MATRIX_I2C
/* Select hand configuration */
#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS
#define SSD1306OLED
#define USE_SERIAL_PD2
#define TAPPING_FORCE_HOLD
#define TAPPING_TERM 100
#undef RGBLED_NUM
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 27
#define RGBLIGHT_LIMIT_VAL 120
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17
#define BACKLIGHT_LEVELS 10
#undef PRODUCT
#define PRODUCT "Vee's hotswappable Helidox/Corne/CRKBD split keeb"
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION

242
keyboards/crkbd/keymaps/omgvee/keymap.c
View File

@@ -1,242 +0,0 @@
#include QMK_KEYBOARD_H
#include "bootloader.h"
#ifdef PROTOCOL_LUFA
#include "lufa.h"
#include "split_util.h"
#endif
#ifdef SSD1306OLED
#include "ssd1306.h"
#endif
extern keymap_config_t keymap_config;
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
#endif
extern uint8_t is_master;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _QWERTY 0
#define _LOWER 1
#define _RAISE 2
#define _ADJUST 3
enum custom_keycodes {
QWERTY = SAFE_RANGE,
LOWER,
RAISE,
ADJUST,
BACKLIT,
RGBRST
};
enum macro_keycodes {
KC_SAMPLEMACRO,
};
#define KC______ KC_TRNS
#define KC_XXXXX KC_NO
#define KC_LOWER LOWER
#define KC_RAISE RAISE
#define KC_RST RESET
#define KC_ERST EEPROM_RESET
#define KC_LRST RGBRST
#define KC_LTOG RGB_TOG
#define KC_LHUI RGB_HUI
#define KC_LHUD RGB_HUD
#define KC_LSAI RGB_SAI
#define KC_LSAD RGB_SAD
#define KC_LVAI RGB_VAI
#define KC_LVAD RGB_VAD
#define KC_LMOD RGB_MOD
#define KC_SFCPS SFT_T(KC_CAPS)
#define KC_CTLTB CTL_T(KC_TAB)
#define KC_GUIEI GUI_T(KC_LANG2)
#define KC_ALTKN ALT_T(KC_LANG1)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_kc( \
//,-----------------------------------------. ,-----------------------------------------.
ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
SFCPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
CTLTB, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
GUIEI, LOWER, ENT, SPC, RAISE, ALTKN \
//`--------------------' `--------------------'
),
[_LOWER] = LAYOUT_kc( \
//,-----------------------------------------. ,-----------------------------------------.
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
SFCPS, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, ENT,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
CTLTB, F11, F12, F13, F14, F15, F16, F17, F18, F19, F20, RSFT,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
GUIEI, LOWER, ENT, SPC, RAISE, ALTKN \
//`--------------------' `--------------------'
),
[_RAISE] = LAYOUT_kc( \
//,-----------------------------------------. ,-----------------------------------------.
TAB, EXLM, AT, HASH, DLR, PERC, CIRC, AMPR, ASTR, LPRN, RPRN, DEL,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
SFCPS, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, MINS, EQL, LCBR, RCBR, PIPE, BSLS,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
CTLTB, XXXXX, VOLD, VOLU, MUTE, MPLY, UNDS, PLUS, LBRC, RBRC, SLSH, RSFT,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
GUIEI, LOWER, ENT, SPC, RAISE, ALTKN \
//`--------------------' `--------------------'
),
[_ADJUST] = LAYOUT_kc( \
//,-----------------------------------------. ,-----------------------------------------.
RST, LRST, XXXXX, XXXXX, XXXXX, ERST, MNXT, MPRV, MFFD, MRWD, XXXXX, EJCT,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
LTOG, LHUI, LSAI, LVAI, PGUP, HOME, LEFT, DOWN, UP, RIGHT, XXXXX, INS,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
LMOD, LHUD, LSAD, LVAD, PGDN, END, BRID, BRIU, VOLD, VOLU, MUTE, MPLY,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
GUIEI, LOWER, ENT, SPC, RAISE, ALTKN \
//`--------------------' `--------------------'
)
};
int RGB_current_mode;
// Setting ADJUST layer RGB back to default
void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
layer_on(layer3);
} else {
layer_off(layer3);
}
}
void matrix_init_user(void) {
#ifdef RGBLIGHT_ENABLE
RGB_current_mode = rgblight_config.mode;
#endif
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
iota_gfx_init(!has_usb()); // turns on the display
#endif
}
//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
// When add source files to SRC in rules.mk, you can use functions.
const char *read_layer_state(void);
const char *read_logo(void);
void set_keylog(uint16_t keycode, keyrecord_t *record);
const char *read_keylog(void);
const char *read_keylogs(void);
// const char *read_mode_icon(bool swap);
// const char *read_host_led_state(void);
// void set_timelog(void);
// const char *read_timelog(void);
void matrix_scan_user(void) {
iota_gfx_task();
}
void matrix_render_user(struct CharacterMatrix *matrix) {
if (is_master) {
// If you want to change the display of OLED, you need to change here
matrix_write_ln(matrix, read_layer_state());
matrix_write_ln(matrix, read_keylog());
matrix_write_ln(matrix, read_keylogs());
//matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
//matrix_write_ln(matrix, read_host_led_state());
//matrix_write_ln(matrix, read_timelog());
} else {
matrix_write_ln(matrix, read_layer_state());
matrix_write_ln(matrix, read_keylog());
matrix_write_ln(matrix, read_keylogs());
//matrix_write(matrix, read_logo());
}
}
void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
if (memcmp(dest->display, source->display, sizeof(dest->display))) {
memcpy(dest->display, source->display, sizeof(dest->display));
dest->dirty = true;
}
}
void iota_gfx_task_user(void) {
struct CharacterMatrix matrix;
matrix_clear(&matrix);
matrix_render_user(&matrix);
matrix_update(&display, &matrix);
}
#endif//SSD1306OLED
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (record->event.pressed) {
#ifdef SSD1306OLED
set_keylog(keycode, record);
#endif
// set_timelog();
}
switch (keycode) {
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
break;
case RGB_MOD:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
rgblight_mode(RGB_current_mode);
rgblight_step();
RGB_current_mode = rgblight_config.mode;
}
#endif
return false;
break;
case RGBRST:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
RGB_current_mode = rgblight_config.mode;
}
#endif
break;
}
return true;
}

18
keyboards/crkbd/keymaps/omgvee/readme.md
View File

@@ -1,18 +0,0 @@
# Reade.md for what I want from my HeliDox(CRKBD) layout
======================================================
![My beloved HeliDox keeb](https://i.imgur.com/NbVAB3g.jpg)
- media keys and media controls
- in-switch LED intensity controls (+/-)
- underglow RGB hue/color controls
- underglow RGB intensity controls
- familiar key arrangement with Enter and symbols on the usual keys (to the right hand side)
- navigation keys should be the vim ones really;
- arrow keys on one layer(most likely on the ADJUST one)
See keymap.c for layouts
P.S> this lil' keeb is so addictive I have no words, really...

32
keyboards/crkbd/keymaps/omgvee/rules.mk
View File

@@ -1,32 +0,0 @@
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
EXTRAFLAGS += -flto
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
SWAP_HANDS_ENABLE = no # Enable one-hand typing
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# If you want to change the display of OLED, you need to change here
SRC += ./lib/glcdfont.c \
./lib/rgb_state_reader.c \
./lib/layer_state_reader.c \
./lib/logo_reader.c \
./lib/keylogger.c \
# ./lib/mode_icon_reader.c \
# ./lib/host_led_state_reader.c \
# ./lib/timelogger.c \

5
keyboards/crkbd/keymaps/oo/keymap.c
View File

@@ -61,8 +61,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
#ifdef OLED_DRIVER_ENABLE
#include <stdio.h>
oled_rotation_t oled_init_user(oled_rotation_t rotation) {
if (!is_master) {
if (!is_keyboard_master()) {
return OLED_ROTATION_180; // flips the display 180 degrees if offhand
}
return rotation;
@@ -148,7 +149,7 @@ void oled_render_logo(void) {
}
void oled_task_user(void) {
if (is_master) {
if (is_keyboard_master()) {
oled_render_layer_state();
oled_render_keylog();
} else {

6
keyboards/crkbd/keymaps/rjhilgefort/keymap.c
View File

@@ -104,8 +104,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
};
#ifdef OLED_DRIVER_ENABLE
# include <stdio.h>
oled_rotation_t oled_init_user(oled_rotation_t rotation) {
if (!is_master) {
if (!is_keyboard_master()) {
return OLED_ROTATION_180; // flips the display 180 degrees if offhand
}
return rotation;
@@ -203,7 +205,7 @@ void oled_render_logo(void) {
}
void oled_task_user(void) {
if (is_master) {
if (is_keyboard_master()) {
oled_render_layer_state();
oled_render_keylog();
} else {

21
keyboards/crkbd/keymaps/rpbaptist/keymap.c
View File

@@ -1,6 +1,5 @@
#include QMK_KEYBOARD_H
extern uint8_t is_master;
static uint32_t oled_timer = 0;
#ifdef RGB_MATRIX_ENABLE
@@ -84,7 +83,7 @@ user_config_t user_config;
#define KC_EUR ALGR(KC_5)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_COLEMAKDHM] = LAYOUT( \
[_COLEMAKDHM] = LAYOUT_split_3x6_3( \
//,-----------------------------------------------------. ,-----------------------------------------------------.
KC_ESC, KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, BSP_DEL,\
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
@@ -96,7 +95,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//`--------------------------' `--------------------------'
),
[_GAMING] = LAYOUT( \
[_GAMING] = LAYOUT_split_3x6_3( \
//,-----------------------------------------------------. ,-----------------------------------------------------.
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BSPC,\
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
@@ -108,7 +107,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//`--------------------------' `--------------------------'
),
[_GAMING_EXT] = LAYOUT( \
[_GAMING_EXT] = LAYOUT_split_3x6_3( \
//,-----------------------------------------------------. ,-----------------------------------------------------.
KC_GRV, KC_1, KC_2, _______, KC_3, KC_4, _______, _______, _______, _______, _______, KC_DEL,\
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
@@ -120,7 +119,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//`--------------------------' `--------------------------'
),
[_NUMPAD] = LAYOUT( \
[_NUMPAD] = LAYOUT_split_3x6_3( \
//,-----------------------------------------------------. ,-----------------------------------------------------.
_______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_EUR, KC_P7, KC_P8, KC_P9, XXXXXXX, _______,\
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
@@ -132,7 +131,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//`--------------------------' `--------------------------'
),
[_SYM] = LAYOUT( \
[_SYM] = LAYOUT_split_3x6_3( \
//,-----------------------------------------------------. ,-----------------------------------------------------.
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______,\
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
@@ -144,7 +143,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//`--------------------------' `--------------------------'
),
[_NAV] = LAYOUT( \
[_NAV] = LAYOUT_split_3x6_3( \
//,-----------------------------------------------------. ,-----------------------------------------------------.
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_PGUP, KC_HOME, KC_UP, KC_END, XXXXXXX, KC_BSPC,\
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
@@ -156,7 +155,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//`--------------------------' `--------------------------'
),
[_UTIL] = LAYOUT( \
[_UTIL] = LAYOUT_split_3x6_3( \
//,-----------------------------------------------------. ,-----------------------------------------------------.
RESET, XXXXXXX, KC_MPRV, KC_VOLU, KC_MNXT, COLEMAK, RGB_IDL, RGB_MAP, RGB_NXS, XXXXXXX, RGB_HUD, RGB_HUI,\
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
@@ -183,7 +182,7 @@ layer_state_t layer_state_set_user(layer_state_t state) {
#ifdef OLED_DRIVER_ENABLE
oled_rotation_t oled_init_user(oled_rotation_t rotation) {
if (is_master) {
if (is_keyboard_master()) {
return OLED_ROTATION_270;
} else {
return OLED_ROTATION_180;
@@ -299,7 +298,7 @@ void oled_task_user(void) {
oled_on();
}
if (is_master) {
if (is_keyboard_master()) {
render_status(); // Renders the current keyboard state (layer, lock, caps, scroll, etc)
} else {
render_crkbd_logo();
@@ -344,7 +343,7 @@ void check_default_layer(uint8_t type) {
void rgb_matrix_indicators_user(void) {
if (
user_config.rgb_layer_change && !g_suspend_state && rgb_matrix_config.enable &&
user_config.rgb_layer_change && rgb_matrix_config.enable &&
(!user_config.rgb_matrix_idle_anim || rgb_matrix_get_mode() != user_config.rgb_matrix_idle_mode)
)
{

2
keyboards/crkbd/keymaps/rs/config.h
View File

@@ -28,7 +28,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define MASTER_RIGHT
// #define EE_HANDS
#define SSD1306OLED
// #define SSD1306OLED
#define USE_SERIAL_PD2

30
keyboards/crkbd/keymaps/rs/keymap.c
View File

@@ -2,37 +2,37 @@
#include "rs.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_kc(
[_QWERTY] = LAYOUT(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
TAB , Q , W , E , R , T , Y , U , I , O , P ,EQL ,
KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P ,KC_EQL ,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
ESCC, A , S , D , F , G , H , J , K , L ,SCLN,QUOT,
KC_ESCC, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L ,KC_SCLN,KC_QUOT,
//|----+----+----+----+----+----+ |----+----+----+----+----+----|
LSFT, Z , X , C , V , B , N , M ,COMM,DOT ,SLSH,ENTS,
KC_LSFT, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_ENTS,
//`----+----+----+--+-+----+----+----/ \----+----+----+----+----+----+----'
LALT,LGUI,SPC , BSPC,CODE,FN
KC_LALT,KC_LGUI,KC_SPC , KC_BSPC,KC_CODE,KC_FN
// `----+----+----' `+---+----+----'c
),
[_CODE] = LAYOUT_kc(
[_CODE] = LAYOUT(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
GRV ,EXLM, AT ,HASH, DLR,PERC, CIRC,LPLT,ASTR,RPGT,NEQL, ,
KC_GRV ,KC_EXLM, KC_AT ,KC_HASH, KC_DLR,KC_PERC, KC_CIRC,KC_LPLT,KC_ASTR,KC_RPGT,KC_NEQL,_______,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
, 1 , 2 , 3 , 4 , 5 , MINS,LBRC, UP ,RBRC, ,BSLS,
_______, KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_MINS,KC_LBRC, KC_UP ,KC_RBRC,_______,KC_BSLS,
//|----+----+----+----+----+----+ |----+----+----+----+----+----|
, 6 , 7 , 8 , 9 , 0 , AMPR,LEFT,DOWN,RGHT, ,PIPE,
_______, KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_AMPR,KC_LEFT,KC_DOWN,KC_RGHT,_______,KC_PIPE,
//`----+----+----+--+-+----+----+----/ \----+----+----+----+----+----+----'
, ,DOT , , ,
_______,_______,KC_DOT , _______,_______,_______
// `----+----+----' `----+----+----'
),
[_FN] = LAYOUT_kc(
[_FN] = LAYOUT(
//,----+----+----+----+----+----. ,----+----+----+----+----+----.
, F1 , F2 , F3 , F4 , F5 , F6 , F7 , F8 , F9 , F10, F11,
_______, KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10, KC_F11,
//|----+----+----+----+----+----| |----+----+----+----+----+----|
LTOG,LHUI,LSAI,LVAI,LRST,BRMU, VOLU, ,PGUP, , , ,
KC_LTOG,KC_LHUI,KC_LSAI,KC_LVAI,KC_LRST,KC_BRMU, KC_VOLU,_______,KC_PGUP,_______,_______,_______,
//|----+----+----+----+----+----+ |----+----+----+----+----+----|
LMOD,LHUD,LSAD,LVAD,RST ,BRMD, VOLD,CTRA,PGDN,CTRE, , ,
KC_LMOD,KC_LHUD,KC_LSAD,KC_LVAD,KC_RST ,KC_BRMD, KC_VOLD,KC_CTRA,KC_PGDN,KC_CTRE,_______,_______,
//`----+----+----+--+-+----+----+----/ \----+----+----+----+----+----+----'
, , , MUTE, ,
_______,_______,_______, KC_MUTE,_______,_______
// `----+----+----' `----+----+----'
),
};

2
keyboards/crkbd/keymaps/rs/rules.mk
View File

@@ -14,7 +14,7 @@ MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
SWAP_HANDS_ENABLE = no # Enable one-hand typing
TAP_DANCE_ENABLE = no

16
keyboards/crkbd/keymaps/soundmonster/keymap.c
View File

@@ -11,8 +11,6 @@ extern rgblight_config_t rgblight_config;
static uint32_t oled_timer = 0;
#endif
extern uint8_t is_master;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
@@ -38,7 +36,7 @@ enum custom_keycodes {
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT(
[_QWERTY] = LAYOUT_split_3x6_3(
//,-----------------------------------------. ,---------------------------------------------.
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
//|------+------+------+------+------+------| |------+------+-------+------+-------+--------|
@@ -50,7 +48,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//`--------------------' `--------------------'
),
[_LOWER] = LAYOUT(
[_LOWER] = LAYOUT_split_3x6_3(
//,---------------------------------------------. ,-----------------------------------------.
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL,
//|------+------+-------+-------+-------+-------| |------+------+------+------+------+------|
@@ -62,7 +60,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//`--------------------' `--------------------'
),
[_RAISE] = LAYOUT(
[_RAISE] = LAYOUT_split_3x6_3(
//,-----------------------------------------. ,-----------------------------------------.
KC_ESC,KC_EXLM,KC_AT,KC_HASH,KC_DLR,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,KC_BSPC,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
@@ -74,7 +72,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
//`--------------------' `--------------------'
),
[_ADJUST] = LAYOUT(
[_ADJUST] = LAYOUT_split_3x6_3(
//,-----------------------------------------. ,-----------------------------------------.
RESET,RGBRST, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,KC__MUTE, KC_NO, KC_NO, KC_NO, KC_NO,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
@@ -298,6 +296,10 @@ void render_status_secondary(void) {
render_mod_status_ctrl_shift(get_mods()|get_oneshot_mods());
}
void suspend_power_down_user() {
oled_off();
}
void oled_task_user(void) {
if (timer_elapsed32(oled_timer) > 30000) {
oled_off();
@@ -307,7 +309,7 @@ void oled_task_user(void) {
else { oled_on(); }
#endif
if (is_master) {
if (is_keyboard_master()) {
render_status_main(); // Renders the current keyboard state (layer, lock, caps, scroll, etc)
} else {
render_status_secondary();

16
keyboards/crkbd/keymaps/thefrey/README.md
View File

@@ -1,16 +0,0 @@
![the-frey-layout](https://raw.githubusercontent.com/the-frey/the-frey.github.com/master/assets/images/keyboard-layout.jpg)
# Keyboard layout by the-frey
This is a layout that allows access to all the paren keys easily, has a tab on the lower layer (for SUPER-TAB app switching) and some utility features like PGUP/PGDOWN and HOME/END.
In addition, the arrows are on the lower layer and are bound to the vim keys (h,j,k,l). I've found this a productive layout for programming in emacs and hopefully you will too.
The layout image above shows the keymap, with each key marked with all three layers:
- The top indicates the raise layer
- The middle indicates the default layer
- The bottom indicates the lower layer
All the keys respond as you'd expect to the 'shift' key - i.e. on a UK/GB keyboard, `/` becomes `?` and so on.

45
keyboards/crkbd/keymaps/thefrey/config.h
View File

@@ -1,45 +0,0 @@
/*
This is the c configuration file for the keymap
Copyright 2012 Jun Wako <wakojun@gmail.com>
Copyright 2015 Jack Humbert
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
//#define USE_MATRIX_I2C
#define FORCE_NKRO
/* Select hand configuration */
#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS
#define SSD1306OLED
#define USE_SERIAL_PD2
#define TAPPING_FORCE_HOLD
#define TAPPING_TERM 100
#undef RGBLED_NUM
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 27
#define RGBLIGHT_LIMIT_VAL 120
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#define RGBLIGHT_VAL_STEP 17

243
keyboards/crkbd/keymaps/thefrey/keymap.c
View File

@@ -1,243 +0,0 @@
#include QMK_KEYBOARD_H
#include "bootloader.h"
#ifdef PROTOCOL_LUFA
#include "lufa.h"
#include "split_util.h"
#endif
#ifdef SSD1306OLED
#include "ssd1306.h"
#endif
extern keymap_config_t keymap_config;
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
#endif
extern uint8_t is_master;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _QWERTY 0
#define _LOWER 1
#define _RAISE 2
#define _ADJUST 3
enum custom_keycodes {
QWERTY = SAFE_RANGE,
LOWER,
RAISE,
ADJUST,
BACKLIT,
RGBRST
};
enum macro_keycodes {
KC_SAMPLEMACRO,
};
#define KC______ KC_TRNS
#define KC_XXXXX KC_NO
#define KC_LOWER LOWER
#define KC_RAISE RAISE
#define KC_RST RESET
#define KC_LRST RGBRST
#define KC_LTOG RGB_TOG
#define KC_LHUI RGB_HUI
#define KC_LHUD RGB_HUD
#define KC_LSAI RGB_SAI
#define KC_LSAD RGB_SAD
#define KC_LVAI RGB_VAI
#define KC_LVAD RGB_VAD
#define KC_LMOD RGB_MOD
#define KC_CTLTB CTL_T(KC_TAB)
#define KC_GUIEI GUI_T(KC_LANG2)
#define KC_ALTKN ALT_T(KC_LANG1)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_kc( \
//,-----------------------------------------. ,-----------------------------------------.
ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
CTLTB, A, S, D, F, G, H, J, K, L, SCLN, QUOT,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \
//`--------------------' `--------------------'
),
[_LOWER] = LAYOUT_kc( \
//,-----------------------------------------. ,-----------------------------------------.
TAB, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, BSPC,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
CTLTB, MUTE, VOLD, VOLU, PGUP, PGDN, LEFT, DOWN, UP, RIGHT, HOME, END,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
LSFT, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, XXXXX,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \
//`--------------------' `--------------------'
),
[_RAISE] = LAYOUT_kc( \
//,-----------------------------------------. ,-----------------------------------------.
ESC, EXLM, AT, HASH, DLR, PERC, CIRC, AMPR, ASTR, LPRN, RPRN, BSPC,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
CTLTB, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, MINS, EQL, LCBR, RCBR, PIPE, GRV,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
LSFT, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, UNDS, PLUS, LBRC, RBRC, BSLS, TILD,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \
//`--------------------' `--------------------'
),
[_ADJUST] = LAYOUT_kc( \
//,-----------------------------------------. ,-----------------------------------------.
RST, LRST, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
LTOG, LHUI, LSAI, LVAI, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
LMOD, LHUD, LSAD, LVAD, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
GUIEI, LOWER, SPC, ENT, RAISE, ALTKN \
//`--------------------' `--------------------'
)
};
int RGB_current_mode;
// Setting ADJUST layer RGB back to default
void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
layer_on(layer3);
} else {
layer_off(layer3);
}
}
void matrix_init_user(void) {
#ifdef RGBLIGHT_ENABLE
RGB_current_mode = rgblight_config.mode;
#endif
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
iota_gfx_init(!has_usb()); // turns on the display
#endif
}
//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
// When add source files to SRC in rules.mk, you can use functions.
const char *read_layer_state(void);
const char *read_logo(void);
void set_keylog(uint16_t keycode, keyrecord_t *record);
const char *read_keylog(void);
const char *read_keylogs(void);
// const char *read_mode_icon(bool swap);
// const char *read_host_led_state(void);
// void set_timelog(void);
// const char *read_timelog(void);
void matrix_scan_user(void) {
iota_gfx_task();
}
void matrix_render_user(struct CharacterMatrix *matrix) {
if (is_master) {
// If you want to change the display of OLED, you need to change here
matrix_write_ln(matrix, read_layer_state());
matrix_write_ln(matrix, read_keylog());
matrix_write_ln(matrix, read_keylogs());
//matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
//matrix_write_ln(matrix, read_host_led_state());
//matrix_write_ln(matrix, read_timelog());
} else {
matrix_write(matrix, read_logo());
}
}
void matrix_update(struct CharacterMatrix *dest, const struct CharacterMatrix *source) {
if (memcmp(dest->display, source->display, sizeof(dest->display))) {
memcpy(dest->display, source->display, sizeof(dest->display));
dest->dirty = true;
}
}
void iota_gfx_task_user(void) {
struct CharacterMatrix matrix;
matrix_clear(&matrix);
matrix_render_user(&matrix);
matrix_update(&display, &matrix);
}
#endif//SSD1306OLED
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (record->event.pressed) {
#ifdef SSD1306OLED
set_keylog(keycode, record);
#endif
// set_timelog();
}
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
set_single_persistent_default_layer(_QWERTY);
}
return false;
break;
case LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
break;
case RGB_MOD:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
rgblight_mode(RGB_current_mode);
rgblight_step();
RGB_current_mode = rgblight_config.mode;
}
#endif
return false;
break;
case RGBRST:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
RGB_current_mode = rgblight_config.mode;
}
#endif
break;
}
return true;
}

31
keyboards/crkbd/keymaps/thefrey/rules.mk
View File

@@ -1,31 +0,0 @@
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
SWAP_HANDS_ENABLE = no # Enable one-hand typing
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# If you want to change the display of OLED, you need to change here
SRC += ./lib/glcdfont.c \
./lib/rgb_state_reader.c \
./lib/layer_state_reader.c \
./lib/logo_reader.c \
./lib/keylogger.c \
# ./lib/mode_icon_reader.c \
# ./lib/host_led_state_reader.c \
# ./lib/timelogger.c \

2
keyboards/crkbd/keymaps/thumb_ctrl/config.h
View File

@@ -28,7 +28,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define MASTER_RIGHT
// #define EE_HANDS
#define SSD1306OLED
// #define SSD1306OLED
#define USE_SERIAL_PD2

43
keyboards/crkbd/keymaps/thumb_ctrl/keymap.c
View File

@@ -15,8 +15,6 @@ extern keymap_config_t keymap_config;
extern rgblight_config_t rgblight_config;
#endif
extern uint8_t is_master;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
@@ -62,51 +60,51 @@ enum custom_keycodes {
#define KC_ALTDL ALT_T(KC_DEL)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_kc(
[_QWERTY] = LAYOUT(
//,-----------------------------------------. ,-----------------------------------------.
ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC,
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
CTLTB, A, S, D, F, G, H, J, K, L, SCLN, QUOT,
KC_CTLTB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
LSFT, Z, X, C, V, B, N, M, COMM, DOT, SLSH, ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT,
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
ALTSP, LOWER, GUIEN, SFTJP, RAISE, ALTDL
KC_ALTSP, KC_LOWER, KC_GUIEN, KC_SFTJP, KC_RAISE, KC_ALTDL
//`--------------------' `--------------------'
),
[_LOWER] = LAYOUT_kc(
[_LOWER] = LAYOUT(
//,-----------------------------------------. ,-----------------------------------------.
, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, ,
_______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
, HOME, END, PGDN, PGUP, F11, LEFT, DOWN, UP, RGHT, F12, PIPE,
_______, KC_HOME, KC_END, KC_PGDN, KC_PGUP, KC_F11, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_F12, KC_PIPE,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, ,
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______,
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
, , , , ,
_______, _______, _______, _______, _______, _______
//`--------------------' `--------------------'
),
[_RAISE] = LAYOUT_kc(
[_RAISE] = LAYOUT(
//,-----------------------------------------. ,-----------------------------------------.
, EXLM, AT, HASH, DLR, PERC, CIRC, AMPR, ASTR, LPRN, RPRN, ,
_______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
, XXXXX, XXXXX, XXXXX, XXXXX, PSCR, GRV, MINS, PLUS, LCBR, RCBR, BSLS,
_______, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_PSCR, KC_GRV, KC_MINS, KC_PLUS, KC_LCBR, KC_RCBR, KC_BSLS,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, TILD, UNDS, EQL, LBRC, RBRC, ,
_______, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_TILD, KC_UNDS, KC_EQL, KC_LBRC, KC_RBRC, _______,
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
, , , , ,
_______, _______, _______, _______, _______, _______
//`--------------------' `--------------------'
),
[_ADJUST] = LAYOUT_kc(
[_ADJUST] = LAYOUT(
//,-----------------------------------------. ,-----------------------------------------.
RST, LRST, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,
KC_RST, KC_LRST, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
LTOG, LHUI, LSAI, LVAI, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,
KC_LTOG, KC_LHUI, KC_LSAI, KC_LVAI, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
LMOD, LHUD, LSAD, LVAD, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,
KC_LMOD, KC_LHUD, KC_LSAD, KC_LVAD, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX,
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
GUIEI, LOWER, SPC, ENT, RAISE, ALTKN
KC_GUIEI, KC_LOWER, KC_SPC, KC_ENT, KC_RAISE, KC_ALTKN
//`--------------------' `--------------------'
)
};
@@ -250,4 +248,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
}
return true;
}

5
keyboards/crkbd/keymaps/thumb_ctrl/rules.mk
View File

@@ -14,7 +14,7 @@ MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
SWAP_HANDS_ENABLE = no # Enable one-hand typing
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
@@ -29,3 +29,6 @@ SRC += ./lib/glcdfont.c \
# ./lib/mode_icon_reader.c \
# ./lib/host_led_state_reader.c \
# ./lib/timelogger.c \
VPATH += keyboards/crkbd/lib
LIB_SRC += ssd1306.c i2c.c

0
keyboards/crkbd/rev1/common/keymaps/via/config.h → keyboards/crkbd/keymaps/via/config.h
View File

6
keyboards/crkbd/rev1/common/keymaps/via/keymap.c → keyboards/crkbd/keymaps/via/keymap.c
View File

@@ -70,8 +70,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
};
#ifdef OLED_DRIVER_ENABLE
#include <stdio.h>
oled_rotation_t oled_init_user(oled_rotation_t rotation) {
if (!is_master) {
if (!is_keyboard_master()) {
return OLED_ROTATION_180; // flips the display 180 degrees if offhand
}
return rotation;
@@ -157,7 +159,7 @@ void oled_render_logo(void) {
}
void oled_task_user(void) {
if (is_master) {
if (is_keyboard_master()) {
oled_render_layer_state();
oled_render_keylog();
} else {

0
keyboards/crkbd/rev1/common/keymaps/via/rules.mk → keyboards/crkbd/keymaps/via/rules.mk
View File

1
keyboards/crkbd/keymaps/vlukash_trackpad_left/config.h
View File

@@ -6,6 +6,7 @@
// #define EE_HANDS
#define SSD1306OLED
#define USE_SSD_I2C
#define USE_SERIAL_PD2

58
keyboards/crkbd/keymaps/vlukash_trackpad_left/keymap.c
View File

@@ -13,8 +13,6 @@
extern rgblight_config_t rgblight_config;
#endif
extern uint8_t is_master;
enum layer_names {
_QWERTY,
_LOWER,
@@ -31,8 +29,6 @@ enum custom_keycodes {
SCRL
};
#define KC______ KC_TRNS
#define KC_XXXXX KC_NO
#define KC_LOWER LOWER
#define KC_RAISE RAISE
#define KC_RST RESET
@@ -57,51 +53,51 @@ enum custom_keycodes {
#define KC_SCRL SCRL
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_kc(
[_QWERTY] = LAYOUT(
//,-----------------------------------------. ,-----------------------------------------.
ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC,
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
TAB, CTLA, S, D, F, G, H, J, K, L, CTLSC, QUOT,
KC_TAB, KC_CTLA, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_CTLSC, KC_QUOT,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
GRAVE, SFTZ, WINX, C, V, B, N, M, COMM, WINDO, SFTSL,BSLASH,
KC_GRAVE, KC_SFTZ, KC_WINX, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_WINDO, KC_SFTSL,KC_BSLASH,
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
LOWER, SPC, SCRL, MBTN1, ENT, RAISE
KC_LOWER, KC_SPC, KC_SCRL, KC_MBTN1, KC_ENT, KC_RAISE
//`--------------------' `--------------------'
),
[_LOWER] = LAYOUT_kc(
[_LOWER] = LAYOUT(
//,-----------------------------------------. ,-----------------------------------------.
ESC, XXXXX, PGDN, PSCR, PGUP, LBRC, RBRC, 7, 8, 9, XXXXX, XXXXX,
KC_ESC, XXXXXXX, KC_PGDN, KC_PSCR, KC_PGUP, KC_LBRC, KC_RBRC, KC_7, KC_8, KC_9, XXXXXXX, XXXXXXX,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
XXXXX, LCTRL, PLUS, MINS, EQL, LPRN, RPRN, 4, 5, 6, RCTRL, XXXXX,
XXXXXXX, KC_LCTRL, KC_PLUS, KC_MINS, KC_EQL, KC_LPRN, KC_RPRN, KC_4, KC_5, KC_6, KC_RCTRL, XXXXXXX,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
XXXXX, LSFT, HOME, XXXXX, END, LCBR, RCBR, 1, 2, 3, RSFT, XXXXX,
XXXXXXX, KC_LSFT, KC_HOME, XXXXXXX, KC_END, KC_LCBR, KC_RCBR, KC_1, KC_2, KC_3, KC_RSFT, XXXXXXX,
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
LOWER, SPC, SCRL, MBTN1, ENT, 0
KC_LOWER, KC_SPC, KC_SCRL, KC_MBTN1, KC_ENT, KC_0
//`--------------------' `--------------------'
),
[_RAISE] = LAYOUT_kc(
[_RAISE] = LAYOUT(
//,-----------------------------------------. ,-----------------------------------------.
ESC, XXXXX, F7, F8, F9, F10, BTN2, BTN2, MNXT, MPRV, MPLY, MSTP,
KC_ESC, XXXXXXX, KC_F7, KC_F8, KC_F9, KC_F10, KC_BTN2, KC_BTN2, KC_MNXT, KC_MPRV, KC_MPLY, KC_MSTP,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
XXXXX, LCTRL, F4, F5, F6, F11, LEFT, DOWN, UP, RIGHT, RCTRL, XXXXX,
XXXXXXX, KC_LCTRL, KC_F4, KC_F5, KC_F6, KC_F11, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_RCTRL, XXXXXXX,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
XXXXX, LSFT, F1, F2, F3, F12, XXXXX, XXXXX, VOLU, VOLD, MUTE, RSFT,
XXXXXXX, KC_LSFT, KC_F1, KC_F2, KC_F3, KC_F12, XXXXXXX, XXXXXXX, KC_VOLU, KC_VOLD, KC_MUTE, KC_RSFT,
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
LOWER, SPC, SCRL, MBTN1, ENT, RAISE
KC_LOWER, KC_SPC, KC_SCRL, KC_MBTN1, KC_ENT, KC_RAISE
//`--------------------' `--------------------'
),
[_ADJUST] = LAYOUT_kc(
[_ADJUST] = LAYOUT(
//,-----------------------------------------. ,-----------------------------------------.
RST, LRST, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, RST,
KC_RST, KC_LRST, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_RST,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
LTOG, LHUI, LSAI, LVAI, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,
KC_LTOG, KC_LHUI, KC_LSAI, KC_LVAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
LMOD, LHUD, LSAD, LVAD, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,
KC_LMOD, KC_LHUD, KC_LSAD, KC_LVAD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
LOWER, SPC, SCRL, MBTN1, ENT, RAISE
KC_LOWER, KC_SPC, KC_SCRL, KC_MBTN1, KC_ENT, KC_RAISE
//`--------------------' `--------------------'
)
};
@@ -128,7 +124,7 @@ void matrix_init_user(void) {
#endif
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
iota_gfx_init(!has_usb()); // turns on the display
iota_gfx_init(); // turns on the display
#endif
}
@@ -147,11 +143,14 @@ void matrix_scan_user(void) {
}
void matrix_render_user(struct CharacterMatrix *matrix) {
if (is_master) {
if (is_keyboard_master()) {
// If you want to change the display of OLED, you need to change here
matrix_write_ln(matrix, read_layer_state());
matrix_write_ln(matrix, read_keylog());
matrix_write_ln(matrix, read_keylogs());
matrix_write(matrix, read_layer_state());
matrix_write(matrix, "\n");
matrix_write(matrix, read_keylog());
matrix_write(matrix, "\n");
matrix_write(matrix, read_keylogs());
matrix_write(matrix, "\n");
} else {
matrix_write(matrix, read_logo());
}
@@ -224,4 +223,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
}
return true;
}

3
keyboards/crkbd/keymaps/vlukash_trackpad_left/rules.mk
View File

@@ -9,3 +9,6 @@ SRC += ./lib/glcdfont.c \
./lib/layer_state_reader.c \
./lib/logo_reader.c \
./lib/keylogger.c \
VPATH += keyboards/crkbd/lib
LIB_SRC += ssd1306.c i2c.c

41
keyboards/crkbd/keymaps/vlukash_trackpad_right/keymap.c
View File

@@ -16,7 +16,6 @@ extern bool isScrollMode;
extern rgblight_config_t rgblight_config;
#endif
extern uint8_t is_master;
enum layer_names {
_QWERTY,
@@ -60,51 +59,51 @@ enum custom_keycodes {
#define KC_SCRL SCRL
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_kc(
[_QWERTY] = LAYOUT(
//,-----------------------------------------. ,-----------------------------------------.
ESC, Q, W, E, R, T, Y, U, I, O, P, BSPC,
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
TAB, CTLA, S, D, F, G, H, J, K, L, CTLSC, QUOT,
KC_TAB, KC_CTLA, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_CTLSC, KC_QUOT,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
GRAVE, SFTZ, WINX, C, V, B, N, M, COMM, WINDO, SFTSL,BSLASH,
KC_GRAVE, KC_SFTZ, KC_WINX, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_WINDO, KC_SFTSL,KC_BSLASH,
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
LOWER, SPC, SCRL, MBTN1, ENT, RAISE
KC_LOWER, KC_SPC, KC_SCRL, KC_MBTN1, KC_ENT, KC_RAISE
//`--------------------' `--------------------'
),
[_LOWER] = LAYOUT_kc(
[_LOWER] = LAYOUT(
//,-----------------------------------------. ,-----------------------------------------.
ESC, XXXXX, PGDN, PSCR, PGUP, LBRC, RBRC, 7, 8, 9, XXXXX, XXXXX,
KC_ESC, KC_XXXXX, KC_PGDN, KC_PSCR, KC_PGUP, KC_LBRC, KC_RBRC, KC_7, KC_8, KC_9, KC_XXXXX, KC_XXXXX,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
XXXXX, LCTRL, PLUS, MINS, EQL, LPRN, RPRN, 4, 5, 6, RCTRL, XXXXX,
KC_XXXXX, KC_LCTRL, KC_PLUS, KC_MINS, KC_EQL, KC_LPRN, KC_RPRN, KC_4, KC_5, KC_6, KC_RCTRL, KC_XXXXX,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
XXXXX, LSFT, HOME, XXXXX, END, LCBR, RCBR, 1, 2, 3, RSFT, XXXXX,
KC_XXXXX, KC_LSFT, KC_HOME, KC_XXXXX, KC_END, KC_LCBR, KC_RCBR, KC_1, KC_2, KC_3, KC_RSFT, KC_XXXXX,
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
LOWER, SPC, SCRL, MBTN1, ENT, 0
KC_LOWER, KC_SPC, KC_SCRL, KC_MBTN1, KC_ENT, KC_0
//`--------------------' `--------------------'
),
[_RAISE] = LAYOUT_kc(
[_RAISE] = LAYOUT(
//,-----------------------------------------. ,-----------------------------------------.
ESC, XXXXX, F7, F8, F9, F10, BTN2, BTN2, MNXT, MPRV, MPLY, MSTP,
KC_ESC, KC_XXXXX, KC_F7, KC_F8, KC_F9, KC_F10, KC_BTN2, KC_BTN2, KC_MNXT, KC_MPRV, KC_MPLY, KC_MSTP,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
XXXXX, LCTRL, F4, F5, F6, F11, LEFT, DOWN, UP, RIGHT, RCTRL, XXXXX,
KC_XXXXX, KC_LCTRL, KC_F4, KC_F5, KC_F6, KC_F11, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_RCTRL, KC_XXXXX,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
XXXXX, LSFT, F1, F2, F3, F12, XXXXX, XXXXX, VOLU, VOLD, MUTE, RSFT,
KC_XXXXX, KC_LSFT, KC_F1, KC_F2, KC_F3, KC_F12, KC_XXXXX, KC_XXXXX, KC_VOLU, KC_VOLD, KC_MUTE, KC_RSFT,
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
LOWER, SPC, SCRL, MBTN1, ENT, RAISE
KC_LOWER, KC_SPC, KC_SCRL, KC_MBTN1, KC_ENT, KC_RAISE
//`--------------------' `--------------------'
),
[_ADJUST] = LAYOUT_kc(
[_ADJUST] = LAYOUT(
//,-----------------------------------------. ,-----------------------------------------.
RST, LRST, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, RST,
KC_RST, KC_LRST, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_RST,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
LTOG, LHUI, LSAI, LVAI, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,
KC_LTOG, KC_LHUI, KC_LSAI, KC_LVAI, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX,
//|------+------+------+------+------+------| |------+------+------+------+------+------|
LMOD, LHUD, LSAD, LVAD, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,
KC_LMOD, KC_LHUD, KC_LSAD, KC_LVAD, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX,
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
LOWER, SPC, SCRL, MBTN1, ENT, RAISE
KC_LOWER, KC_SPC, KC_SCRL, KC_MBTN1, KC_ENT, KC_RAISE
//`--------------------' `--------------------'
)
};

1
keyboards/crkbd/keymaps/vxid/config.h
View File

@@ -29,6 +29,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
// #define EE_HANDS
#define SSD1306OLED
#define USE_SSD_I2C
#define USE_SERIAL_PD2

32
keyboards/crkbd/keymaps/vxid/keymap.c
View File

@@ -7,8 +7,6 @@
extern keymap_config_t keymap_config;
extern uint8_t is_master;
#define _QWERTY 0
#define _LOWER 1
#define _RAISE 2
@@ -25,39 +23,39 @@ enum custom_keycodes {
#define KC_RAISE RAISE
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_kc( \
[_QWERTY] = LAYOUT( \
//,-----------------------------------------. ,-----------------------------------------.
Q, W, E, R, T, ESC, DEL, Y, U, I, O, P,\
KC_Q, KC_W, KC_E, KC_R, KC_T, KC_ESC, KC_DEL, KC_Y, KC_U, KC_I, KC_O, KC_P,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
A, S, D, F, G, SPC, BSPC, H, J, K, L, SCLN,\
KC_A, KC_S, KC_D, KC_F, KC_G, KC_SPC, KC_BSPC, KC_H, KC_J, KC_K, KC_L, KC_SCLN,\
//|------+------+------+------+------+------| |------+------+------+------+------+------|
Z, X, C, V, B, TAB, ENT, N, M, COMM, DOT, SLSH,\
KC_Z, KC_X, KC_C, KC_V, KC_B, KC_TAB, KC_ENT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,\
//|------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
LALT, LGUI, LCTL, LSFT, RAISE, LOWER \
KC_LALT, KC_LGUI, KC_LCTL, KC_LSFT, KC_RAISE, KC_LOWER \
//`--------------------' `--------------------'
),
[_LOWER] = LAYOUT_kc( \
[_LOWER] = LAYOUT( \
//,-----------------------------------------. ,------------------------------------------.
1, 2, 3, 4, 5, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
KC_1, KC_2, KC_3, KC_4, KC_5, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX,\
//|------+------+------+------+------+------| |-------+------+------+------+------+------|
6, 7, 8, 9, 0, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
KC_6, KC_7, KC_8, KC_9, KC_0, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX,\
//|------+------+------+------+------+------| |-------+------+------+------+------+------|
EQL, PLUS, MINS, SLSH, ASTR, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
KC_EQL, KC_PLUS, KC_MINS, KC_SLSH, KC_ASTR, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX,\
//|------+------+------+------+------+------+------| |------+-------+------+------+------+------+------|
LALT, LGUI, LCTL, LSFT, RAISE, LOWER \
KC_LALT, KC_LGUI, KC_LCTL, KC_LSFT, KC_RAISE, KC_LOWER \
//`--------------------' `--------------------'
),
[_RAISE] = LAYOUT_kc( \
[_RAISE] = LAYOUT( \
//,-----------------------------------------. ,------------------------------------------.
EXLM, AT, HASH, DLR, PERC, LPRN, RPRN, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_LPRN, KC_RPRN, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX,\
//|------+------+------+------+------+------| |-------+------+------+------+------+------|
CIRC, AMPR, ASTR, QUOT, DQUO, LCBR, RCBR, LEFT, DOWN, UP, RIGHT, XXXXX,\
KC_CIRC, KC_AMPR, KC_ASTR, KC_QUOT, KC_DQUO, KC_LCBR, KC_RCBR, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_XXXXX,\
//|------+------+------+------+------+------| |-------+------+------+------+------+------|
BSLS, TILD, GRV, UNDS, PIPE, LBRC, RBRC, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX,\
KC_BSLS, KC_TILD, KC_GRV, KC_UNDS, KC_PIPE, KC_LBRC, KC_RBRC, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX, KC_XXXXX,\
//|------+------+------+------+------+------+------| |------+-------+------+------+------+------+------|
LALT, LGUI, LCTL, LSFT, RAISE, LOWER \
KC_LALT, KC_LGUI, KC_LCTL, KC_LSFT, KC_RAISE, KC_LOWER \
//`--------------------' `--------------------'
)
};

5
keyboards/crkbd/keymaps/vxid/rules.mk
View File

@@ -14,7 +14,7 @@ MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
SWAP_HANDS_ENABLE = no # Enable one-hand typing
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
@@ -29,3 +29,6 @@ SRC += ./lib/glcdfont.c \
# ./lib/mode_icon_reader.c \
# ./lib/host_led_state_reader.c \
# ./lib/timelogger.c \
VPATH += keyboards/crkbd/lib
LIB_SRC += ssd1306.c i2c.c

5
keyboards/crkbd/keymaps/xyverz/keymap.c
View File

@@ -17,6 +17,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
#include <stdio.h>
enum layer_names {
_DVORAK,
@@ -101,7 +102,7 @@ layer_state_t layer_state_set_user(layer_state_t state) {
#ifdef OLED_DRIVER_ENABLE
oled_rotation_t oled_init_user(oled_rotation_t rotation) {
if (!is_master) {
if (!is_keyboard_master()) {
return OLED_ROTATION_180; // flips the display 180 degrees if offhand
}
return rotation;
@@ -187,7 +188,7 @@ void oled_render_logo(void) {
}
void oled_task_user(void) {
if (is_master) {
if (is_keyboard_master()) {
oled_render_layer_state();
oled_render_keylog();
} else {

2
keyboards/crkbd/rev1/legacy/i2c.c → keyboards/crkbd/lib/i2c.c
View File

@@ -6,7 +6,7 @@
#include <stdbool.h>
#include "i2c.h"
#if defined(USE_I2C) || defined(USE_MATRIX_I2C)
#if defined(USE_SSD_I2C)
// Limits the amount of we wait for any one i2c transaction.
// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is

0
keyboards/crkbd/rev1/legacy/i2c.h → keyboards/crkbd/lib/i2c.h
View File

19
keyboards/crkbd/rev1/common/common.c
View File

@@ -1,19 +0,0 @@
/*
Copyright 2019 @foostan
Copyright 2020 Drashna Jaelre <@drashna>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "common.h"

24
keyboards/crkbd/rev1/common/common.h
View File

@@ -1,24 +0,0 @@
/*
Copyright 2019 @foostan
Copyright 2020 Drashna Jaelre <@drashna>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "rev1.h"
#define has_usb() is_keyboard_master()
#define is_master is_keyboard_master()

28
keyboards/crkbd/rev1/common/config.h
View File

@@ -1,28 +0,0 @@
/*
Copyright 2019 @foostan
Copyright 2020 Drashna Jaelre <@drashna>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#define USE_SERIAL
#define SOFT_SERIAL_PIN D2
#ifdef RGB_MATRIX_ENABLE
# define RGB_MATRIX_SPLIT { 27, 27 }
#endif
#define DIODE_DIRECTION COL2ROW

3
keyboards/crkbd/rev1/common/rules.mk
View File

@@ -1,2 +1 @@
SPLIT_KEYBOARD = yes
SPLIT_TRANSPORT = mirror # for when Split Mirroring drops, it will maintain mirroring functionality
DEFAULT_FOLDER = crkbd/rev1

7
keyboards/crkbd/rev1/config.h
View File

@@ -18,6 +18,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
#define USE_SERIAL
#define SOFT_SERIAL_PIN D2
/* ws2812 RGB LED */
#define RGB_DI_PIN D3
@@ -29,4 +32,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#ifdef RGB_MATRIX_ENABLE
# define RGBLED_NUM 54 // Number of LEDs
# define DRIVER_LED_TOTAL RGBLED_NUM
# define RGB_MATRIX_SPLIT { 27, 27 }
# define SPLIT_TRANSPORT_MIRROR
#endif
#define DIODE_DIRECTION COL2ROW

22
keyboards/crkbd/rev1/legacy/config.h
View File

@@ -1,22 +0,0 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
Copyright 2015 Jack Humbert
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "serial_config.h"

19
keyboards/crkbd/rev1/legacy/legacy.c
View File

@@ -1,19 +0,0 @@
/*
Copyright 2019 @foostan
Copyright 2020 Drashna Jaelre <@drashna>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "legacy.h"

23
keyboards/crkbd/rev1/legacy/legacy.h
View File

@@ -1,23 +0,0 @@
/*
Copyright 2019 @foostan
Copyright 2020 Drashna Jaelre <@drashna>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "rev1.h"
extern uint8_t is_master;

397
keyboards/crkbd/rev1/legacy/matrix.c
View File

@@ -1,397 +0,0 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* scan matrix
*/
#include <stdint.h>
#include <stdbool.h>
#include <string.h>
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/interrupt.h>
#include <util/delay.h>
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
#include "split_util.h"
#include "quantum.h"
#ifdef USE_MATRIX_I2C
# include "i2c.h"
#else // USE_SERIAL
# include "split_scomm.h"
#endif
#ifndef DEBOUNCE
# define DEBOUNCE 5
#endif
#define ERROR_DISCONNECT_COUNT 5
static uint8_t debouncing = DEBOUNCE;
static const int ROWS_PER_HAND = MATRIX_ROWS/2;
static uint8_t error_count = 0;
uint8_t is_master = 0 ;
static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
static matrix_row_t read_cols(void);
static void init_cols(void);
static void unselect_rows(void);
static void select_row(uint8_t row);
static uint8_t matrix_master_scan(void);
__attribute__ ((weak))
void matrix_init_kb(void) {
matrix_init_user();
}
__attribute__ ((weak))
void matrix_scan_kb(void) {
matrix_scan_user();
}
__attribute__ ((weak))
void matrix_init_user(void) {
}
__attribute__ ((weak))
void matrix_scan_user(void) {
}
inline
uint8_t matrix_rows(void)
{
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void)
{
return MATRIX_COLS;
}
void tx_rx_leds_init(void)
{
#ifndef NO_DEBUG_LEDS
setPinOutput(B0);
setPinOutput(D5);
writePinHigh(B0);
writePinHigh(D5);
#endif
}
void tx_led_on(void)
{
#ifndef NO_DEBUG_LEDS
writePinLow(D5);
#endif
}
void tx_led_off(void)
{
#ifndef NO_DEBUG_LEDS
writePinHigh(D5);
#endif
}
void rx_led_on(void)
{
#ifndef NO_DEBUG_LEDS
writePinLow(B0);
#endif
}
void rx_led_off(void)
{
#ifndef NO_DEBUG_LEDS
writePinHigh(B0);
#endif
}
void matrix_init(void)
{
split_keyboard_setup();
// initialize row and col
unselect_rows();
init_cols();
tx_rx_leds_init();
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
matrix[i] = 0;
matrix_debouncing[i] = 0;
}
is_master = has_usb();
matrix_init_quantum();
}
uint8_t _matrix_scan(void)
{
bool changed = false;
// Right hand is stored after the left in the matirx so, we need to offset it
int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
select_row(i);
_delay_us(30); // without this wait read unstable value.
matrix_row_t cols = read_cols();
if (matrix_debouncing[i+offset] != cols) {
changed = true;
matrix_debouncing[i+offset] = cols;
debouncing = DEBOUNCE;
}
unselect_rows();
}
if (debouncing) {
if (--debouncing) {
_delay_ms(1);
} else {
for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
matrix[i+offset] = matrix_debouncing[i+offset];
}
}
}
return changed;
}
#ifdef USE_MATRIX_I2C
// Get rows from other half over i2c
int i2c_transaction(void) {
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
if (err) goto i2c_error;
// start of matrix stored at 0x00
err = i2c_master_write(0x00);
if (err) goto i2c_error;
// Start read
err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
if (err) goto i2c_error;
if (!err) {
int i;
for (i = 0; i < ROWS_PER_HAND-1; ++i) {
matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
}
matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
i2c_master_stop();
} else {
i2c_error: // the cable is disconnceted, or something else went wrong
i2c_reset_state();
return err;
}
return 0;
}
#else // USE_SERIAL
int serial_transaction(int master_changed) {
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
#ifdef SERIAL_USE_MULTI_TRANSACTION
int ret=serial_update_buffers(master_changed);
#else
int ret=serial_update_buffers();
#endif
if (ret ) {
if(ret==2) rx_led_on();
return 1;
}
rx_led_off();
memcpy(&matrix[slaveOffset],
(void *)serial_slave_buffer, SERIAL_SLAVE_BUFFER_LENGTH);
return 0;
}
#endif
uint8_t matrix_scan(void)
{
bool changed = false;
if (is_master) {
changed |= matrix_master_scan();
}else{
changed |= matrix_slave_scan();
int offset = (isLeftHand) ? ROWS_PER_HAND : 0;
memcpy(&matrix[offset],
(void *)serial_master_buffer, SERIAL_MASTER_BUFFER_LENGTH);
matrix_scan_quantum();
}
return (uint8_t) changed;
}
uint8_t matrix_master_scan(void) {
int ret = _matrix_scan();
int mchanged = 1;
int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
#ifdef USE_MATRIX_I2C
// for (int i = 0; i < ROWS_PER_HAND; ++i) {
/* i2c_slave_buffer[i] = matrix[offset+i]; */
// i2c_slave_buffer[i] = matrix[offset+i];
// }
#else // USE_SERIAL
#ifdef SERIAL_USE_MULTI_TRANSACTION
mchanged = memcmp((void *)serial_master_buffer,
&matrix[offset], SERIAL_MASTER_BUFFER_LENGTH);
#endif
memcpy((void *)serial_master_buffer,
&matrix[offset], SERIAL_MASTER_BUFFER_LENGTH);
#endif
#ifdef USE_MATRIX_I2C
if( i2c_transaction() ) {
#else // USE_SERIAL
if( serial_transaction(mchanged) ) {
#endif
// turn on the indicator led when halves are disconnected
tx_led_on();
error_count++;
if (error_count > ERROR_DISCONNECT_COUNT) {
// reset other half if disconnected
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
for (int i = 0; i < ROWS_PER_HAND; ++i) {
matrix[slaveOffset+i] = 0;
}
}
} else {
// turn off the indicator led on no error
tx_led_off();
error_count = 0;
}
matrix_scan_quantum();
return ret;
}
uint8_t matrix_slave_scan(void) {
int ret = _matrix_scan();
int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
#ifdef USE_MATRIX_I2C
for (int i = 0; i < ROWS_PER_HAND; ++i) {
/* i2c_slave_buffer[i] = matrix[offset+i]; */
i2c_slave_buffer[i] = matrix[offset+i];
}
#else // USE_SERIAL
#ifdef SERIAL_USE_MULTI_TRANSACTION
int change = 0;
#endif
for (int i = 0; i < ROWS_PER_HAND; ++i) {
#ifdef SERIAL_USE_MULTI_TRANSACTION
if( serial_slave_buffer[i] != matrix[offset+i] )
change = 1;
#endif
serial_slave_buffer[i] = matrix[offset+i];
}
#ifdef SERIAL_USE_MULTI_TRANSACTION
slave_buffer_change_count += change;
#endif
#endif
return ret;
}
bool matrix_is_modified(void)
{
if (debouncing) return false;
return true;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & ((matrix_row_t)1<<col));
}
inline
matrix_row_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
print("\nr/c 0123456789ABCDEF\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
print_hex8(row); print(": ");
print_bin_reverse16(matrix_get_row(row));
print("\n");
}
}
uint8_t matrix_key_count(void)
{
uint8_t count = 0;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
count += bitpop16(matrix[i]);
}
return count;
}
static void init_cols(void)
{
for(int x = 0; x < MATRIX_COLS; x++) {
_SFR_IO8((col_pins[x] >> 4) + 1) &= ~_BV(col_pins[x] & 0xF);
_SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF);
}
}
static matrix_row_t read_cols(void)
{
matrix_row_t result = 0;
for(int x = 0; x < MATRIX_COLS; x++) {
result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x);
}
return result;
}
static void unselect_rows(void)
{
for(int x = 0; x < ROWS_PER_HAND; x++) {
_SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF);
_SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF);
}
}
static void select_row(uint8_t row)
{
_SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF);
_SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF);
}

27
keyboards/crkbd/rev1/legacy/post_config.h
View File

@@ -1,27 +0,0 @@
/*
Copyright 2019 @foostan
Copyright 2020 Drashna Jaelre <@drashna>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#ifdef SSD1306OLED
# define USE_I2C
#endif
#if defined(OLED_DRIVER_ENABLE) && (defined(USE_I2C) || defined(USE_MATRIX_I2C))
# error Cannot use both legacy i2c driver and new i2c_master driver at the same time. Undefine USE_I2C and/or USE_MATRIX_I2C
#endif

11
keyboards/crkbd/rev1/legacy/rules.mk
View File

@@ -1,10 +1 @@
CUSTOM_MATRIX = yes
SRC += matrix.c \
split_util.c \
split_scomm.c
QUANTUM_LIB_SRC += i2c.c serial.c
# Disable unsupported hardware
BACKLIGHT_SUPPORTED = no
DEFAULT_FOLDER = crkbd/rev1

589
keyboards/crkbd/rev1/legacy/serial.c
View File

@@ -1,589 +0,0 @@
/*
* WARNING: be careful changing this code, it is very timing dependent
*
* 2018-10-28 checked
* avr-gcc 4.9.2
* avr-gcc 5.4.0
* avr-gcc 7.3.0
*/
#ifndef F_CPU
#define F_CPU 16000000
#endif
#include <avr/io.h>
#include <avr/interrupt.h>
#include <util/delay.h>
#include <stddef.h>
#include <stdbool.h>
#include "serial.h"
#ifdef SOFT_SERIAL_PIN
#ifdef __AVR_ATmega32U4__
// if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial.
#ifdef USE_I2C
#if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1
#error Using ATmega32U4 I2C, so can not use PD0, PD1
#endif
#endif
#if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3
#define SERIAL_PIN_DDR DDRD
#define SERIAL_PIN_PORT PORTD
#define SERIAL_PIN_INPUT PIND
#if SOFT_SERIAL_PIN == D0
#define SERIAL_PIN_MASK _BV(PD0)
#define EIMSK_BIT _BV(INT0)
#define EICRx_BIT (~(_BV(ISC00) | _BV(ISC01)))
#define SERIAL_PIN_INTERRUPT INT0_vect
#elif SOFT_SERIAL_PIN == D1
#define SERIAL_PIN_MASK _BV(PD1)
#define EIMSK_BIT _BV(INT1)
#define EICRx_BIT (~(_BV(ISC10) | _BV(ISC11)))
#define SERIAL_PIN_INTERRUPT INT1_vect
#elif SOFT_SERIAL_PIN == D2
#define SERIAL_PIN_MASK _BV(PD2)
#define EIMSK_BIT _BV(INT2)
#define EICRx_BIT (~(_BV(ISC20) | _BV(ISC21)))
#define SERIAL_PIN_INTERRUPT INT2_vect
#elif SOFT_SERIAL_PIN == D3
#define SERIAL_PIN_MASK _BV(PD3)
#define EIMSK_BIT _BV(INT3)
#define EICRx_BIT (~(_BV(ISC30) | _BV(ISC31)))
#define SERIAL_PIN_INTERRUPT INT3_vect
#endif
#elif SOFT_SERIAL_PIN == E6
#define SERIAL_PIN_DDR DDRE
#define SERIAL_PIN_PORT PORTE
#define SERIAL_PIN_INPUT PINE
#define SERIAL_PIN_MASK _BV(PE6)
#define EIMSK_BIT _BV(INT6)
#define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61)))
#define SERIAL_PIN_INTERRUPT INT6_vect
#else
#error invalid SOFT_SERIAL_PIN value
#endif
#else
#error serial.c now support ATmega32U4 only
#endif
//////////////// for backward compatibility ////////////////////////////////
#ifndef SERIAL_USE_MULTI_TRANSACTION
/* --- USE Simple API (OLD API, compatible with let's split serial.c) */
#if SERIAL_SLAVE_BUFFER_LENGTH > 0
uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
#endif
#if SERIAL_MASTER_BUFFER_LENGTH > 0
uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
#endif
uint8_t volatile status0 = 0;
SSTD_t transactions[] = {
{ (uint8_t *)&status0,
#if SERIAL_MASTER_BUFFER_LENGTH > 0
sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer,
#else
0, (uint8_t *)NULL,
#endif
#if SERIAL_SLAVE_BUFFER_LENGTH > 0
sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer
#else
0, (uint8_t *)NULL,
#endif
}
};
void serial_master_init(void)
{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); }
void serial_slave_init(void)
{ soft_serial_target_init(transactions, TID_LIMIT(transactions)); }
// 0 => no error
// 1 => slave did not respond
// 2 => checksum error
int serial_update_buffers()
{
int result;
result = soft_serial_transaction();
return result;
}
#endif // end of Simple API (OLD API, compatible with let's split serial.c)
////////////////////////////////////////////////////////////////////////////
#define ALWAYS_INLINE __attribute__((always_inline))
#define NO_INLINE __attribute__((noinline))
#define _delay_sub_us(x) __builtin_avr_delay_cycles(x)
// parity check
#define ODD_PARITY 1
#define EVEN_PARITY 0
#define PARITY EVEN_PARITY
#ifdef SERIAL_DELAY
// custom setup in config.h
// #define TID_SEND_ADJUST 2
// #define SERIAL_DELAY 6 // micro sec
// #define READ_WRITE_START_ADJUST 30 // cycles
// #define READ_WRITE_WIDTH_ADJUST 8 // cycles
#else
// ============ Standard setups ============
#ifndef SELECT_SOFT_SERIAL_SPEED
#define SELECT_SOFT_SERIAL_SPEED 1
// 0: about 189kbps
// 1: about 137kbps (default)
// 2: about 75kbps
// 3: about 39kbps
// 4: about 26kbps
// 5: about 20kbps
#endif
#if __GNUC__ < 6
#define TID_SEND_ADJUST 14
#else
#define TID_SEND_ADJUST 2
#endif
#if SELECT_SOFT_SERIAL_SPEED == 0
// Very High speed
#define SERIAL_DELAY 4 // micro sec
#if __GNUC__ < 6
#define READ_WRITE_START_ADJUST 33 // cycles
#define READ_WRITE_WIDTH_ADJUST 3 // cycles
#else
#define READ_WRITE_START_ADJUST 34 // cycles
#define READ_WRITE_WIDTH_ADJUST 7 // cycles
#endif
#elif SELECT_SOFT_SERIAL_SPEED == 1
// High speed
#define SERIAL_DELAY 6 // micro sec
#if __GNUC__ < 6
#define READ_WRITE_START_ADJUST 30 // cycles
#define READ_WRITE_WIDTH_ADJUST 3 // cycles
#else
#define READ_WRITE_START_ADJUST 33 // cycles
#define READ_WRITE_WIDTH_ADJUST 7 // cycles
#endif
#elif SELECT_SOFT_SERIAL_SPEED == 2
// Middle speed
#define SERIAL_DELAY 12 // micro sec
#define READ_WRITE_START_ADJUST 30 // cycles
#if __GNUC__ < 6
#define READ_WRITE_WIDTH_ADJUST 3 // cycles
#else
#define READ_WRITE_WIDTH_ADJUST 7 // cycles
#endif
#elif SELECT_SOFT_SERIAL_SPEED == 3
// Low speed
#define SERIAL_DELAY 24 // micro sec
#define READ_WRITE_START_ADJUST 30 // cycles
#if __GNUC__ < 6
#define READ_WRITE_WIDTH_ADJUST 3 // cycles
#else
#define READ_WRITE_WIDTH_ADJUST 7 // cycles
#endif
#elif SELECT_SOFT_SERIAL_SPEED == 4
// Very Low speed
#define SERIAL_DELAY 36 // micro sec
#define READ_WRITE_START_ADJUST 30 // cycles
#if __GNUC__ < 6
#define READ_WRITE_WIDTH_ADJUST 3 // cycles
#else
#define READ_WRITE_WIDTH_ADJUST 7 // cycles
#endif
#elif SELECT_SOFT_SERIAL_SPEED == 5
// Ultra Low speed
#define SERIAL_DELAY 48 // micro sec
#define READ_WRITE_START_ADJUST 30 // cycles
#if __GNUC__ < 6
#define READ_WRITE_WIDTH_ADJUST 3 // cycles
#else
#define READ_WRITE_WIDTH_ADJUST 7 // cycles
#endif
#else
#error invalid SELECT_SOFT_SERIAL_SPEED value
#endif /* SELECT_SOFT_SERIAL_SPEED */
#endif /* SERIAL_DELAY */
#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2)
#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2)
#define SLAVE_INT_WIDTH_US 1
#ifndef SERIAL_USE_MULTI_TRANSACTION
#define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY
#else
#define SLAVE_INT_ACK_WIDTH_UNIT 2
#define SLAVE_INT_ACK_WIDTH 4
#endif
static SSTD_t *Transaction_table = NULL;
static uint8_t Transaction_table_size = 0;
inline static void serial_delay(void) ALWAYS_INLINE;
inline static
void serial_delay(void) {
_delay_us(SERIAL_DELAY);
}
inline static void serial_delay_half1(void) ALWAYS_INLINE;
inline static
void serial_delay_half1(void) {
_delay_us(SERIAL_DELAY_HALF1);
}
inline static void serial_delay_half2(void) ALWAYS_INLINE;
inline static
void serial_delay_half2(void) {
_delay_us(SERIAL_DELAY_HALF2);
}
inline static void serial_output(void) ALWAYS_INLINE;
inline static
void serial_output(void) {
SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
}
// make the serial pin an input with pull-up resistor
inline static void serial_input_with_pullup(void) ALWAYS_INLINE;
inline static
void serial_input_with_pullup(void) {
SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK;
SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
}
inline static uint8_t serial_read_pin(void) ALWAYS_INLINE;
inline static
uint8_t serial_read_pin(void) {
return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
}
inline static void serial_low(void) ALWAYS_INLINE;
inline static
void serial_low(void) {
SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
}
inline static void serial_high(void) ALWAYS_INLINE;
inline static
void serial_high(void) {
SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
}
void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size)
{
Transaction_table = sstd_table;
Transaction_table_size = (uint8_t)sstd_table_size;
serial_output();
serial_high();
}
void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size)
{
Transaction_table = sstd_table;
Transaction_table_size = (uint8_t)sstd_table_size;
serial_input_with_pullup();
// Enable INT0-INT3,INT6
EIMSK |= EIMSK_BIT;
#if SERIAL_PIN_MASK == _BV(PE6)
// Trigger on falling edge of INT6
EICRB &= EICRx_BIT;
#else
// Trigger on falling edge of INT0-INT3
EICRA &= EICRx_BIT;
#endif
}
// Used by the sender to synchronize timing with the reciver.
static void sync_recv(void) NO_INLINE;
static
void sync_recv(void) {
for (uint8_t i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) {
}
// This shouldn't hang if the target disconnects because the
// serial line will float to high if the target does disconnect.
while (!serial_read_pin());
}
// Used by the reciver to send a synchronization signal to the sender.
static void sync_send(void) NO_INLINE;
static
void sync_send(void) {
serial_low();
serial_delay();
serial_high();
}
// Reads a byte from the serial line
static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE;
static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) {
uint8_t byte, i, p, pb;
_delay_sub_us(READ_WRITE_START_ADJUST);
for( i = 0, byte = 0, p = PARITY; i < bit; i++ ) {
serial_delay_half1(); // read the middle of pulses
if( serial_read_pin() ) {
byte = (byte << 1) | 1; p ^= 1;
} else {
byte = (byte << 1) | 0; p ^= 0;
}
_delay_sub_us(READ_WRITE_WIDTH_ADJUST);
serial_delay_half2();
}
/* recive parity bit */
serial_delay_half1(); // read the middle of pulses
pb = serial_read_pin();
_delay_sub_us(READ_WRITE_WIDTH_ADJUST);
serial_delay_half2();
*pterrcount += (p != pb)? 1 : 0;
return byte;
}
// Sends a byte with MSB ordering
void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE;
void serial_write_chunk(uint8_t data, uint8_t bit) {
uint8_t b, p;
for( p = PARITY, b = 1<<(bit-1); b ; b >>= 1) {
if(data & b) {
serial_high(); p ^= 1;
} else {
serial_low(); p ^= 0;
}
serial_delay();
}
/* send parity bit */
if(p & 1) { serial_high(); }
else { serial_low(); }
serial_delay();
serial_low(); // sync_send() / senc_recv() need raise edge
}
static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
static
void serial_send_packet(uint8_t *buffer, uint8_t size) {
for (uint8_t i = 0; i < size; ++i) {
uint8_t data;
data = buffer[i];
sync_send();
serial_write_chunk(data,8);
}
}
static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
static
uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) {
uint8_t pecount = 0;
for (uint8_t i = 0; i < size; ++i) {
uint8_t data;
sync_recv();
data = serial_read_chunk(&pecount, 8);
buffer[i] = data;
}
return pecount == 0;
}
inline static
void change_sender2reciver(void) {
sync_send(); //0
serial_delay_half1(); //1
serial_low(); //2
serial_input_with_pullup(); //2
serial_delay_half1(); //3
}
inline static
void change_reciver2sender(void) {
sync_recv(); //0
serial_delay(); //1
serial_low(); //3
serial_output(); //3
serial_delay_half1(); //4
}
static inline uint8_t nibble_bits_count(uint8_t bits)
{
bits = (bits & 0x5) + (bits >> 1 & 0x5);
bits = (bits & 0x3) + (bits >> 2 & 0x3);
return bits;
}
// interrupt handle to be used by the target device
ISR(SERIAL_PIN_INTERRUPT) {
#ifndef SERIAL_USE_MULTI_TRANSACTION
serial_low();
serial_output();
SSTD_t *trans = Transaction_table;
#else
// recive transaction table index
uint8_t tid, bits;
uint8_t pecount = 0;
sync_recv();
bits = serial_read_chunk(&pecount,7);
tid = bits>>3;
bits = (bits&7) != nibble_bits_count(tid);
if( bits || pecount> 0 || tid > Transaction_table_size ) {
return;
}
serial_delay_half1();
serial_high(); // response step1 low->high
serial_output();
_delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT*SLAVE_INT_ACK_WIDTH);
SSTD_t *trans = &Transaction_table[tid];
serial_low(); // response step2 ack high->low
#endif
// target send phase
if( trans->target2initiator_buffer_size > 0 )
serial_send_packet((uint8_t *)trans->target2initiator_buffer,
trans->target2initiator_buffer_size);
// target switch to input
change_sender2reciver();
// target recive phase
if( trans->initiator2target_buffer_size > 0 ) {
if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer,
trans->initiator2target_buffer_size) ) {
*trans->status = TRANSACTION_ACCEPTED;
} else {
*trans->status = TRANSACTION_DATA_ERROR;
}
} else {
*trans->status = TRANSACTION_ACCEPTED;
}
sync_recv(); //weit initiator output to high
}
/////////
// start transaction by initiator
//
// int soft_serial_transaction(int sstd_index)
//
// Returns:
// TRANSACTION_END
// TRANSACTION_NO_RESPONSE
// TRANSACTION_DATA_ERROR
// this code is very time dependent, so we need to disable interrupts
#ifndef SERIAL_USE_MULTI_TRANSACTION
int soft_serial_transaction(void) {
SSTD_t *trans = Transaction_table;
#else
int soft_serial_transaction(int sstd_index) {
if( sstd_index > Transaction_table_size )
return TRANSACTION_TYPE_ERROR;
SSTD_t *trans = &Transaction_table[sstd_index];
#endif
cli();
// signal to the target that we want to start a transaction
serial_output();
serial_low();
_delay_us(SLAVE_INT_WIDTH_US);
#ifndef SERIAL_USE_MULTI_TRANSACTION
// wait for the target response
serial_input_with_pullup();
_delay_us(SLAVE_INT_RESPONSE_TIME);
// check if the target is present
if (serial_read_pin()) {
// target failed to pull the line low, assume not present
serial_output();
serial_high();
*trans->status = TRANSACTION_NO_RESPONSE;
sei();
return TRANSACTION_NO_RESPONSE;
}
#else
// send transaction table index
int tid = (sstd_index<<3) | (7 & nibble_bits_count(sstd_index));
sync_send();
_delay_sub_us(TID_SEND_ADJUST);
serial_write_chunk(tid, 7);
serial_delay_half1();
// wait for the target response (step1 low->high)
serial_input_with_pullup();
while( !serial_read_pin() ) {
_delay_sub_us(2);
}
// check if the target is present (step2 high->low)
for( int i = 0; serial_read_pin(); i++ ) {
if (i > SLAVE_INT_ACK_WIDTH + 1) {
// slave failed to pull the line low, assume not present
serial_output();
serial_high();
*trans->status = TRANSACTION_NO_RESPONSE;
sei();
return TRANSACTION_NO_RESPONSE;
}
_delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT);
}
#endif
// initiator recive phase
// if the target is present syncronize with it
if( trans->target2initiator_buffer_size > 0 ) {
if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer,
trans->target2initiator_buffer_size) ) {
serial_output();
serial_high();
*trans->status = TRANSACTION_DATA_ERROR;
sei();
return TRANSACTION_DATA_ERROR;
}
}
// initiator switch to output
change_reciver2sender();
// initiator send phase
if( trans->initiator2target_buffer_size > 0 ) {
serial_send_packet((uint8_t *)trans->initiator2target_buffer,
trans->initiator2target_buffer_size);
}
// always, release the line when not in use
sync_send();
*trans->status = TRANSACTION_END;
sei();
return TRANSACTION_END;
}
#ifdef SERIAL_USE_MULTI_TRANSACTION
int soft_serial_get_and_clean_status(int sstd_index) {
SSTD_t *trans = &Transaction_table[sstd_index];
cli();
int retval = *trans->status;
*trans->status = 0;;
sei();
return retval;
}
#endif
#endif
// Helix serial.c history
// 2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc)
// 2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4)
// (adjusted with avr-gcc 4.9.2)
// 2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78)
// (adjusted with avr-gcc 4.9.2)
// 2018-8-11 add support multi-type transaction (#3608, feb5e4aae)
// (adjusted with avr-gcc 4.9.2)
// 2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff)
// (adjusted with avr-gcc 7.3.0)
// 2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66)
// (adjusted with avr-gcc 5.4.0, 7.3.0)

84
keyboards/crkbd/rev1/legacy/serial.h
View File

@@ -1,84 +0,0 @@
#ifndef SOFT_SERIAL_H
#define SOFT_SERIAL_H
#include <stdbool.h>
// /////////////////////////////////////////////////////////////////
// Need Soft Serial defines in config.h
// /////////////////////////////////////////////////////////////////
// ex.
// #define SOFT_SERIAL_PIN ?? // ?? = D0,D1,D2,D3,E6
// OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5
// // 1: about 137kbps (default)
// // 2: about 75kbps
// // 3: about 39kbps
// // 4: about 26kbps
// // 5: about 20kbps
//
// //// USE Simple API (OLD API, compatible with let's split serial.c)
// ex.
// #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
// #define SERIAL_MASTER_BUFFER_LENGTH 1
//
// //// USE flexible API (using multi-type transaction function)
// #define SERIAL_USE_MULTI_TRANSACTION
//
// /////////////////////////////////////////////////////////////////
#ifndef SERIAL_USE_MULTI_TRANSACTION
/* --- USE Simple API (OLD API, compatible with let's split serial.c) */
#if SERIAL_SLAVE_BUFFER_LENGTH > 0
extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
#endif
#if SERIAL_MASTER_BUFFER_LENGTH > 0
extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
#endif
void serial_master_init(void);
void serial_slave_init(void);
int serial_update_buffers(void);
#endif // USE Simple API
// Soft Serial Transaction Descriptor
typedef struct _SSTD_t {
uint8_t *status;
uint8_t initiator2target_buffer_size;
uint8_t *initiator2target_buffer;
uint8_t target2initiator_buffer_size;
uint8_t *target2initiator_buffer;
} SSTD_t;
#define TID_LIMIT( table ) (sizeof(table) / sizeof(SSTD_t))
// initiator is transaction start side
void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size);
// target is interrupt accept side
void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size);
// initiator resullt
#define TRANSACTION_END 0
#define TRANSACTION_NO_RESPONSE 0x1
#define TRANSACTION_DATA_ERROR 0x2
#define TRANSACTION_TYPE_ERROR 0x4
#ifndef SERIAL_USE_MULTI_TRANSACTION
int soft_serial_transaction(void);
#else
int soft_serial_transaction(int sstd_index);
#endif
// target status
// *SSTD_t.status has
// initiator:
// TRANSACTION_END
// or TRANSACTION_NO_RESPONSE
// or TRANSACTION_DATA_ERROR
// target:
// TRANSACTION_DATA_ERROR
// or TRANSACTION_ACCEPTED
#define TRANSACTION_ACCEPTED 0x8
#ifdef SERIAL_USE_MULTI_TRANSACTION
int soft_serial_get_and_clean_status(int sstd_index);
#endif
#endif /* SOFT_SERIAL_H */

22
keyboards/crkbd/rev1/legacy/serial_config.h
View File

@@ -1,22 +0,0 @@
/*
Copyright 2019 @foostan
Copyright 2020 Drashna Jaelre <@drashna>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef SOFT_SERIAL_PIN
#define SOFT_SERIAL_PIN D2
#define SERIAL_USE_MULTI_TRANSACTION
#endif

23
keyboards/crkbd/rev1/legacy/serial_config_simpleapi.h
View File

@@ -1,23 +0,0 @@
/*
Copyright 2019 @foostan
Copyright 2020 Drashna Jaelre <@drashna>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#undef SERIAL_USE_MULTI_TRANSACTION
#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2

111
keyboards/crkbd/rev1/legacy/split_scomm.c
View File

@@ -1,111 +0,0 @@
/*
Copyright 2019 @foostan
Copyright 2020 Drashna Jaelre <@drashna>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef USE_SERIAL
#ifdef SERIAL_USE_MULTI_TRANSACTION
/* --- USE flexible API (using multi-type transaction function) --- */
#include <stdbool.h>
#include <stdint.h>
#include <stddef.h>
#include "split_scomm.h"
#include "serial.h"
#ifdef CONSOLE_ENABLE
#include "debug.h"
#endif
uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
uint8_t volatile status_com = 0;
uint8_t volatile status1 = 0;
uint8_t slave_buffer_change_count = 0;
uint8_t s_change_old = 0xff;
uint8_t s_change_new = 0xff;
SSTD_t transactions[] = {
#define GET_SLAVE_STATUS 0
/* master buffer not changed, only recive slave_buffer_change_count */
{ (uint8_t *)&status_com,
0, NULL,
sizeof(slave_buffer_change_count), &slave_buffer_change_count,
},
#define PUT_MASTER_GET_SLAVE_STATUS 1
/* master buffer changed need send, and recive slave_buffer_change_count */
{ (uint8_t *)&status_com,
sizeof(serial_master_buffer), (uint8_t *)serial_master_buffer,
sizeof(slave_buffer_change_count), &slave_buffer_change_count,
},
#define GET_SLAVE_BUFFER 2
/* recive serial_slave_buffer */
{ (uint8_t *)&status1,
0, NULL,
sizeof(serial_slave_buffer), (uint8_t *)serial_slave_buffer
}
};
void serial_master_init(void)
{
soft_serial_initiator_init(transactions, TID_LIMIT(transactions));
}
void serial_slave_init(void)
{
soft_serial_target_init(transactions, TID_LIMIT(transactions));
}
// 0 => no error
// 1 => slave did not respond
// 2 => checksum error
int serial_update_buffers(int master_update)
{
int status, smatstatus;
static int need_retry = 0;
if( s_change_old != s_change_new ) {
smatstatus = soft_serial_transaction(GET_SLAVE_BUFFER);
if( smatstatus == TRANSACTION_END ) {
s_change_old = s_change_new;
#ifdef CONSOLE_ENABLE
if (debug_matrix) {
uprintf("slave matrix = %b %b %b %b\n",
serial_slave_buffer[0], serial_slave_buffer[1],
serial_slave_buffer[2], serial_slave_buffer[3]);
}
#endif
}
} else {
// serial_slave_buffer dosen't change
smatstatus = TRANSACTION_END; // dummy status
}
if( !master_update && !need_retry) {
status = soft_serial_transaction(GET_SLAVE_STATUS);
} else {
status = soft_serial_transaction(PUT_MASTER_GET_SLAVE_STATUS);
}
if( status == TRANSACTION_END ) {
s_change_new = slave_buffer_change_count;
need_retry = 0;
} else {
need_retry = 1;
}
return smatstatus;
}
#endif // SERIAL_USE_MULTI_TRANSACTION
#endif /* USE_SERIAL */

42
keyboards/crkbd/rev1/legacy/split_scomm.h
View File

@@ -1,42 +0,0 @@
/*
Copyright 2019 @foostan
Copyright 2020 Drashna Jaelre <@drashna>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef SPLIT_COMM_H
#define SPLIT_COMM_H
#ifndef SERIAL_USE_MULTI_TRANSACTION
/* --- USE Simple API (OLD API, compatible with let's split serial.c) --- */
#include "serial.h"
#else
/* --- USE flexible API (using multi-type transaction function) --- */
// Buffers for master - slave communication
#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
#define SERIAL_MASTER_BUFFER_LENGTH MATRIX_ROWS/2
extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
extern uint8_t slave_buffer_change_count;
void serial_master_init(void);
void serial_slave_init(void);
int serial_update_buffers(int master_changed);
#endif
#endif /* SPLIT_COMM_H */

127
keyboards/crkbd/rev1/legacy/split_util.c
View File

@@ -1,127 +0,0 @@
/*
Copyright 2019 @foostan
Copyright 2020 Drashna Jaelre <@drashna>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <avr/io.h>
#include <avr/wdt.h>
#include <avr/power.h>
#include <avr/interrupt.h>
#include <util/delay.h>
#include <avr/eeprom.h>
#include "split_util.h"
#include "matrix.h"
#include "keyboard.h"
#include "wait.h"
#ifdef EE_HANDS
# include "eeconfig.h"
#endif
#ifdef USE_MATRIX_I2C
# include "i2c_master.h"
#else
# include "split_scomm.h"
#endif
#ifndef SPLIT_USB_TIMEOUT
# define SPLIT_USB_TIMEOUT 2000
#endif
#ifndef SPLIT_USB_TIMEOUT_POLL
# define SPLIT_USB_TIMEOUT_POLL 10
#endif
volatile bool isLeftHand = true;
bool waitForUsb(void) {
for (uint8_t i = 0; i < (SPLIT_USB_TIMEOUT / SPLIT_USB_TIMEOUT_POLL); i++) {
// This will return true if a USB connection has been established
if (UDADDR & _BV(ADDEN)) {
return true;
}
wait_ms(SPLIT_USB_TIMEOUT_POLL);
}
// Avoid NO_USB_STARTUP_CHECK - Disable USB as the previous checks seem to enable it somehow
(USBCON &= ~(_BV(USBE) | _BV(OTGPADE)));
return false;
}
__attribute__((weak)) bool is_keyboard_left(void) {
#if defined(SPLIT_HAND_PIN)
// Test pin SPLIT_HAND_PIN for High/Low, if low it's right hand
setPinInput(SPLIT_HAND_PIN);
return readPin(SPLIT_HAND_PIN);
#elif defined(EE_HANDS)
return eeconfig_read_handedness();
#elif defined(MASTER_RIGHT)
return !has_usb();
#endif
return has_usb();
}
__attribute__((weak)) bool has_usb(void) {
static enum { UNKNOWN, MASTER, SLAVE } usbstate = UNKNOWN;
// only check once, as this is called often
if (usbstate == UNKNOWN) {
#if defined(SPLIT_USB_DETECT)
usbstate = waitForUsb() ? MASTER : SLAVE;
#elif defined(__AVR__)
USBCON |= (1 << OTGPADE); // enables VBUS pad
wait_us(5);
usbstate = (USBSTA & (1 << VBUS)) ? MASTER : SLAVE; // checks state of VBUS
#else
usbstate = MASTER;
#endif
}
return (usbstate == MASTER);
}
static void keyboard_master_setup(void) {
#ifdef USE_MATRIX_I2C
i2c_init();
#else
serial_master_init();
#endif
}
static void keyboard_slave_setup(void) {
#ifdef USE_MATRIX_I2C
i2c_slave_init(SLAVE_I2C_ADDRESS);
#else
serial_slave_init();
#endif
}
// this code runs before the usb and keyboard is initialized
void split_keyboard_setup(void) {
isLeftHand = is_keyboard_left();
if (has_usb()) {
keyboard_master_setup();
} else {
keyboard_slave_setup();
}
sei();
}

37
keyboards/crkbd/rev1/legacy/split_util.h
View File

@@ -1,37 +0,0 @@
/*
Copyright 2019 @foostan
Copyright 2020 Drashna Jaelre <@drashna>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef SPLIT_KEYBOARD_UTIL_H
#define SPLIT_KEYBOARD_UTIL_H
#include <stdbool.h>
#include "eeconfig.h"
#define SLAVE_I2C_ADDRESS 0x32
extern volatile bool isLeftHand;
// slave version of matix scan, defined in matrix.c
uint8_t matrix_slave_scan(void);
void split_keyboard_setup(void);
bool has_usb(void);
void matrix_master_OLED_init (void);
#endif

357
keyboards/crkbd/rev1/legacy/ssd1306.c
View File

@@ -1,357 +0,0 @@
#ifdef SSD1306OLED
#include "ssd1306.h"
#include "i2c.h"
#include <string.h>
#include "print.h"
#ifdef PROTOCOL_LUFA
#include "lufa.h"
#endif
#include "sendchar.h"
#include "timer.h"
struct CharacterMatrix display;
extern const unsigned char font[] PROGMEM;
#ifndef OLED_BLANK_CHAR
#define OLED_BLANK_CHAR ' '
#endif
#ifndef OLED_BITS_FILTER
#define OLED_BITS_FILTER
#endif
// Set this to 1 to help diagnose early startup problems
// when testing power-on with ble. Turn it off otherwise,
// as the latency of printing most of the debug info messes
// with the matrix scan, causing keys to drop.
#define DEBUG_TO_SCREEN 0
//static uint16_t last_battery_update;
//static uint32_t vbat;
//#define BatteryUpdateInterval 10000 /* milliseconds */
// 'last_flush' is declared as uint16_t,
// so this must be less than 65535
#ifndef ScreenOffInterval
#define ScreenOffInterval 60000 /* milliseconds */
#endif
#if DEBUG_TO_SCREEN
static uint8_t displaying;
#endif
static uint16_t last_flush;
static bool force_dirty = true;
// Write command sequence.
// Returns true on success.
static inline bool _send_cmd1(uint8_t cmd) {
bool res = false;
if (i2c_start_write(SSD1306_ADDRESS)) {
xprintf("failed to start write to %d\n", SSD1306_ADDRESS);
goto done;
}
if (i2c_master_write(0x0 /* command byte follows */)) {
print("failed to write control byte\n");
goto done;
}
if (i2c_master_write(cmd)) {
xprintf("failed to write command %d\n", cmd);
goto done;
}
res = true;
done:
i2c_master_stop();
return res;
}
#define send_cmd1(c) if (!_send_cmd1(c)) {goto done;}
#define send_cmds(c) if (!_send_cmds(c,sizeof(c))) {goto done;}
#define cmd1(X) X
#define cmd2(X,Y) X,Y
#define cmd3(X,Y,Z) X,Y,Z
static bool _send_cmds(const uint8_t* p,uint8_t sz) {
for(uint8_t i=sz;i;i--) {
send_cmd1( pgm_read_byte(p++) );
}
return true;
done:
return false;
}
#define SEND_CMDS(...) {static const uint8_t _cmds[] PROGMEM = { __VA_ARGS__,0 };send_cmds(_cmds);}
static void clear_display(void) {
matrix_clear(&display);
// Clear all of the display bits (there can be random noise
// in the RAM on startup)
SEND_CMDS(
cmd3(PageAddr, 0, (DisplayHeight / 8) - 1),
cmd3(ColumnAddr, 0, DisplayWidth - 1)
);
if (i2c_start_write(SSD1306_ADDRESS)) {
goto done;
}
if (i2c_master_write(0x40)) {
// Data mode
goto done;
}
for (uint8_t row = MatrixRows;row; row--) {
for (uint8_t col = DisplayWidth; col; col--) {
i2c_master_write(0);
}
}
display.dirty = false;
done:
i2c_master_stop();
}
#if DEBUG_TO_SCREEN
#undef sendchar
static int8_t capture_sendchar(uint8_t c) {
sendchar(c);
iota_gfx_write_char(c);
if (!displaying) {
iota_gfx_flush();
}
return 0;
}
#endif
bool iota_gfx_init(bool rotate) {
bool success = false;
i2c_master_init();
SEND_CMDS(
cmd1(DisplayOff),
cmd2(SetDisplayClockDiv, 0x80),
cmd2(SetMultiPlex, DisplayHeight - 1),
cmd2(SetDisplayOffset, 0),
cmd1(SetStartLine | 0x0),
cmd2(SetChargePump, 0x14 /* Enable */),
cmd2(SetMemoryMode, 0 /* horizontal addressing */)
);
if(rotate){
// the following Flip the display orientation 180 degrees
SEND_CMDS(
cmd1(SegRemap),
cmd1(ComScanInc)
);
}else{
// Flips the display orientation 0 degrees
SEND_CMDS(
cmd1(SegRemap | 0x1),
cmd1(ComScanDec)
);
}
SEND_CMDS(
#ifdef SSD1306_128X64
cmd2(SetComPins, 0x12),
#else
cmd2(SetComPins, 0x2),
#endif
cmd2(SetContrast, 0x8f),
cmd2(SetPreCharge, 0xf1),
cmd2(SetVComDetect, 0x40),
cmd1(DisplayAllOnResume),
cmd1(NormalDisplay),
cmd1(DeActivateScroll),
cmd1(DisplayOn),
cmd2(SetContrast, 0) // Dim
);
clear_display();
success = true;
iota_gfx_flush();
#if DEBUG_TO_SCREEN
print_set_sendchar(capture_sendchar);
#endif
done:
return success;
}
bool iota_gfx_off(void) {
bool success = false;
send_cmd1(DisplayOff);
success = true;
done:
return success;
}
bool iota_gfx_on(void) {
bool success = false;
send_cmd1(DisplayOn);
success = true;
done:
return success;
}
void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c) {
*matrix->cursor = c;
++matrix->cursor;
if (matrix->cursor - &matrix->display[0][0] == sizeof(matrix->display)) {
// We went off the end; scroll the display upwards by one line
memmove(&matrix->display[0], &matrix->display[1],
MatrixCols * (MatrixRows - 1));
matrix->cursor = &matrix->display[MatrixRows - 1][0];
memset(matrix->cursor, OLED_BLANK_CHAR, MatrixCols);
}
}
void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c) {
matrix->dirty = true;
if (c == '\n') {
// Clear to end of line from the cursor and then move to the
// start of the next line
uint8_t cursor_col = (matrix->cursor - &matrix->display[0][0]) % MatrixCols;
while (cursor_col++ < MatrixCols) {
matrix_write_char_inner(matrix, OLED_BLANK_CHAR);
}
return;
}
matrix_write_char_inner(matrix, c);
}
void iota_gfx_write_char(uint8_t c) {
matrix_write_char(&display, c);
}
void matrix_write(struct CharacterMatrix *matrix, const char *data) {
while (*data) {
matrix_write_char(matrix, *data);
++data;
}
}
void matrix_write_ln(struct CharacterMatrix *matrix, const char *data) {
matrix_write(matrix, data);
matrix_write(matrix, "\n");
}
void iota_gfx_write(const char *data) {
matrix_write(&display, data);
}
void matrix_write_P(struct CharacterMatrix *matrix, const char *data) {
while (true) {
uint8_t c = pgm_read_byte(data);
if (c == 0) {
return;
}
matrix_write_char(matrix, c);
++data;
}
}
void iota_gfx_write_P(const char *data) {
matrix_write_P(&display, data);
}
void matrix_clear(struct CharacterMatrix *matrix) {
memset(matrix->display, OLED_BLANK_CHAR, sizeof(matrix->display));
matrix->cursor = &matrix->display[0][0];
matrix->dirty = true;
}
void iota_gfx_clear_screen(void) {
matrix_clear(&display);
}
void matrix_render(struct CharacterMatrix *matrix) {
last_flush = timer_read();
iota_gfx_on();
#if DEBUG_TO_SCREEN
++displaying;
#endif
// Move to the home position
SEND_CMDS(
cmd3(PageAddr, 0, MatrixRows - 1),
cmd3(ColumnAddr, 0, (MatrixCols * FontWidth) - 1)
);
if (i2c_start_write(SSD1306_ADDRESS)) {
goto done;
}
if (i2c_master_write(0x40)) {
// Data mode
goto done;
}
for (uint8_t row = 0; row < MatrixRows; ++row) {
for (uint8_t col = 0; col < MatrixCols; ++col) {
const uint8_t *glyph = font + (matrix->display[row][col] * FontWidth);
for (uint8_t glyphCol = 0; glyphCol < FontWidth; ++glyphCol) {
uint8_t colBits = pgm_read_byte(glyph + glyphCol);
i2c_master_write(colBits OLED_BITS_FILTER);
}
// 1 column of space between chars (it's not included in the glyph)
//i2c_master_write(0);
}
}
matrix->dirty = false;
done:
i2c_master_stop();
#if DEBUG_TO_SCREEN
--displaying;
#endif
}
void iota_gfx_flush(void) {
matrix_render(&display);
}
__attribute__ ((weak))
void iota_gfx_task_user(void) {
}
void iota_gfx_task(void) {
iota_gfx_task_user();
if (display.dirty|| force_dirty) {
iota_gfx_flush();
force_dirty = false;
}
if (ScreenOffInterval !=0 && timer_elapsed(last_flush) > ScreenOffInterval) {
iota_gfx_off();
}
}
bool process_record_gfx(uint16_t keycode, keyrecord_t *record) {
force_dirty = true;
return true;
}
#endif

90
keyboards/crkbd/rev1/legacy/ssd1306.h
View File

@@ -1,90 +0,0 @@
#pragma once
#include <stdbool.h>
#include <stdio.h>
#include "action.h"
enum ssd1306_cmds {
DisplayOff = 0xAE,
DisplayOn = 0xAF,
SetContrast = 0x81,
DisplayAllOnResume = 0xA4,
DisplayAllOn = 0xA5,
NormalDisplay = 0xA6,
InvertDisplay = 0xA7,
SetDisplayOffset = 0xD3,
SetComPins = 0xda,
SetVComDetect = 0xdb,
SetDisplayClockDiv = 0xD5,
SetPreCharge = 0xd9,
SetMultiPlex = 0xa8,
SetLowColumn = 0x00,
SetHighColumn = 0x10,
SetStartLine = 0x40,
SetMemoryMode = 0x20,
ColumnAddr = 0x21,
PageAddr = 0x22,
ComScanInc = 0xc0,
ComScanDec = 0xc8,
SegRemap = 0xa0,
SetChargePump = 0x8d,
ExternalVcc = 0x01,
SwitchCapVcc = 0x02,
ActivateScroll = 0x2f,
DeActivateScroll = 0x2e,
SetVerticalScrollArea = 0xa3,
RightHorizontalScroll = 0x26,
LeftHorizontalScroll = 0x27,
VerticalAndRightHorizontalScroll = 0x29,
VerticalAndLeftHorizontalScroll = 0x2a,
};
// Controls the SSD1306 128x32 OLED display via i2c
#ifndef SSD1306_ADDRESS
#define SSD1306_ADDRESS 0x3C
#endif
#define DisplayHeight 32
#define DisplayWidth 128
#define FontHeight 8
#define FontWidth 6
#define MatrixRows (DisplayHeight / FontHeight)
#define MatrixCols (DisplayWidth / FontWidth)
struct CharacterMatrix {
uint8_t display[MatrixRows][MatrixCols];
uint8_t *cursor;
bool dirty;
};
extern struct CharacterMatrix display;
bool iota_gfx_init(bool rotate);
void iota_gfx_task(void);
bool iota_gfx_off(void);
bool iota_gfx_on(void);
void iota_gfx_flush(void);
void iota_gfx_write_char(uint8_t c);
void iota_gfx_write(const char *data);
void iota_gfx_write_P(const char *data);
void iota_gfx_clear_screen(void);
void iota_gfx_task_user(void);
void matrix_clear(struct CharacterMatrix *matrix);
void matrix_write_char_inner(struct CharacterMatrix *matrix, uint8_t c);
void matrix_write_char(struct CharacterMatrix *matrix, uint8_t c);
void matrix_write(struct CharacterMatrix *matrix, const char *data);
void matrix_write_ln(struct CharacterMatrix *matrix, const char *data);
void matrix_write_P(struct CharacterMatrix *matrix, const char *data);
void matrix_render(struct CharacterMatrix *matrix);
bool process_record_gfx(uint16_t keycode, keyrecord_t *record);

45
keyboards/crkbd/rev1/rev1.c
View File

@@ -83,47 +83,14 @@ led_config_t g_led_config = { {
4, 4, 4, 4, 4, 4, 4,
4, 4, 1, 1, 1
} };
#endif
void matrix_init_kb(void) {
#ifdef RGB_MATRIX_ENABLE
if (!isLeftHand) {
g_led_config = (led_config_t){ {
{ 51, 50, 45, 44, 37, 36 },
{ 52, 49, 46, 43, 38, 35 },
{ 53, 48, 47, 42, 39, 34 },
{ NO_LED, NO_LED, NO_LED, 41, 40, 33 },
{ 24, 23, 18, 17, 10, 9 },
{ 25, 22, 19, 16, 11, 8 },
{ 26, 21, 20, 15, 12, 7 },
{ NO_LED, NO_LED, NO_LED, 14, 13, 6 }
}, {
{ 139, 16 }, { 174, 13 }, { 208, 20 }, { 208, 38 }, { 174, 48 }, { 139, 52 }, { 129, 63 },
{ 139, 39 }, { 139, 21 }, { 139, 4 }, { 156, 2 }, { 156, 19 }, { 156, 37 }, { 144, 58 },
{ 164, 55 }, { 174, 35 }, { 174, 13 }, { 174, 0 }, { 191, 3 }, { 191, 20 }, { 191, 37 },
{ 208, 42 }, { 208, 24 }, { 208, 7 }, { 224, 7 }, { 224, 24 }, { 224, 41 }, { 85, 16 },
{ 50, 13 }, { 16, 20 }, { 16, 38 }, { 50, 48 }, { 85, 52 }, { 95, 63 }, { 85, 39 },
{ 85, 21 }, { 85, 4 }, { 68, 2 }, { 68, 19 }, { 68, 37 }, { 80, 58 }, { 60, 55 },
{ 50, 35 }, { 50, 13 }, { 50, 0 }, { 33, 3 }, { 33, 20 }, { 33, 37 }, { 16, 42 },
{ 16, 24 }, { 16, 7 }, { 0, 7 }, { 0, 24 }, { 0, 41 }
}, {
2, 2, 2, 2, 2, 2, 1,
4, 4, 4, 4, 4, 4, 1,
1, 4, 4, 4, 4, 4, 4,
4, 4, 4, 1, 1, 1, 2,
2, 2, 2, 2, 2, 1, 4,
4, 4, 4, 4, 4, 1, 1,
4, 4, 4, 4, 4, 4, 4,
4, 4, 1, 1, 1
} };
}
#endif
matrix_init_user();
void suspend_power_down_kb(void) {
rgb_matrix_set_suspend_state(true);
suspend_power_down_user();
}
#ifdef SSD1306OLED
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
return process_record_gfx(keycode,record) && process_record_user(keycode, record);
void suspend_wakeup_init_kb(void) {
rgb_matrix_set_suspend_state(false);
suspend_wakeup_init_user();
}
#endif

27
keyboards/crkbd/rev1/rev1.h
View File

@@ -19,21 +19,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#pragma once
#include "crkbd.h"
#if defined(KEYBOARD_crkbd_rev1_legacy)
# include "legacy.h"
#elif defined(KEYBOARD_crkbd_rev1_common)
# include "common.h"
#endif
#include "quantum.h"
#include "split_util.h"
#ifdef PROTOCOL_LUFA
# include "lufa.h"
#endif
#ifdef SSD1306OLED
# include "ssd1306.h"
#endif
// clang-format off
#define LAYOUT_split_3x6_3( \
@@ -70,18 +56,5 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
{ KC_NO, KC_NO, KC_NO, R32, R31, R30 } \
}
#define LAYOUT_kc( \
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
L30, L31, L32, R30, R31, R32 \
) \
LAYOUT_split_3x6_3( \
KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, \
KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, \
KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, \
KC_##L30, KC_##L31, KC_##L32, KC_##R30, KC_##R31, KC_##R32 \
)
// clang-format on
#define LAYOUT LAYOUT_split_3x6_3

4
keyboards/crkbd/rev1/rules.mk
View File

@@ -1,3 +1 @@
LIB_SRC += ssd1306.c
DEFAULT_FOLDER = crkbd/rev1/legacy
SPLIT_KEYBOARD = yes

4
keyboards/crkbd/rules.mk
View File

@@ -34,7 +34,7 @@ RGB_MATRIX_DRIVER = WS2812
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if firmware size over limit, try this option
# CFLAGS += -flto
# LTO_ENABLE = yes
LAYOUTS = split_3x5_3 split_3x6_3
DEFAULT_FOLDER = crkbd/rev1/legacy
DEFAULT_FOLDER = crkbd/rev1