Add support for Big Series 1-key PCB by Woodkeys.click

keyboards/bigseries/bigseries.c

@@ -0,0 +1,26 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include "bigseries.h"
+
+void matrix_scan_kb(void) {
+  // Looping keyboard code goes here
+  // This runs every cycle (a lot)
+  matrix_scan_user();
+#ifdef BACKLIGHT_ENABLE
+  backlight_task();
+#endif
+};

keyboards/bigseries/bigseries.h

@@ -0,0 +1,28 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef BIGSWITCH_H
+#define BIGSWITCH_H
+
+#include "quantum.h"
+
+#define KEYMAP( \
+  K00  \
+) { \
+  { K00 }  \
+}
+
+#endif

keyboards/bigseries/config.h

@@ -0,0 +1,59 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6071
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    WoodKeys.click
+#define PRODUCT         BigSeries Single Keyboard
+#define DESCRIPTION     Single key board for Novelkeys Big Series Switch
+
+/* key matrix size */
+#define MATRIX_ROWS 1
+#define MATRIX_COLS 1
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B0 }
+#define MATRIX_COL_PINS { B4 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION ROW2COL
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 50
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    false \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+#ifdef RGBLIGHT_ENABLE
+#define RGB_DI_PIN D3
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 5
+#endif
+
+#endif

keyboards/bigseries/keymaps/default/keymap.c

@@ -0,0 +1,93 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "../../bigseries.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+KEYMAP(
+    KC_A),
+
+
+};
+
+
+bool initialized = 0;
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE ;
+}
+
+void matrix_init_user(void) {
+  if (!initialized){
+      dprintf("Initializing in matrix_scan_user");
+      rgblight_enable();
+      rgblight_mode(7);
+      rgblight_sethsv(0,255,255);
+      rgblight_setrgb(0x00, 0x00, 0xFF);
+      initialized = 1;
+    }
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  switch (keycode) {
+  case KC_A:
+    if (record->event.pressed) {
+      SEND_STRING("Howdy!!\n");
+      rgblight_step();
+      return false;
+    }
+  }
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_KANA)) {
+
+  } else {
+
+  }
+
+}

keyboards/bigseries/keymaps/leddance/config.h

@@ -0,0 +1,23 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#define TAPPING_TERM 400
+
+#endif

keyboards/bigseries/keymaps/leddance/keymap.c

@@ -0,0 +1,127 @@
+/*
+Copyright 2018 Cole Markham
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "../../bigseries.h"
+#include "print.h"
+
+extern rgblight_config_t rgblight_config;
+
+enum custom_keycodes {
+  BL = SAFE_RANGE
+};
+
+enum custom_layers {
+  BASE = 0,
+  LED
+};
+
+//Tap Dance Declarations
+enum {
+  TD_TOGGLE = 0
+};
+
+void dance_toggle (qk_tap_dance_state_t *state, void *user_data) {
+  if (state->count >= 2) {
+    println("Double tapped, switching layers");
+    if (layer_state_is(LED)) {
+      layer_off(LED);
+    } else {
+      layer_on(LED);
+    }
+  } else {
+    print("Single tapped: ");
+    if (layer_state_is(LED)) {
+#ifdef RGBLIGHT_ENABLE
+      if (!rgblight_config.enable) {
+        rgblight_enable();
+      }
+      rgblight_step();
+#endif
+    } else {
+      println("Base layer, sending string");
+      SEND_STRING("This thing is BIG!!\n");
+    }
+  }
+}
+
+//Tap Dance Definitions
+qk_tap_dance_action_t tap_dance_actions[] = {
+  [TD_TOGGLE]  = ACTION_TAP_DANCE_FN(dance_toggle)
+// Other declarations would go here, separated by commas, if you have them
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+[BASE] = KEYMAP(
+    TD(TD_TOGGLE)),
+[LED] = KEYMAP(
+    TD(TD_TOGGLE)
+    )
+
+
+};
+
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE ;
+}
+
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+  // Nothing here, see dance_toggle
+  return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+  if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+  } else {
+
+  }
+
+  if (usb_led & (1 << USB_LED_KANA)) {
+
+  } else {
+
+  }
+
+}

keyboards/bigseries/keymaps/leddance/rules.mk

@@ -0,0 +1 @@
+TAP_DANCE_ENABLE = yes

keyboards/bigseries/readme.md

@@ -0,0 +1,15 @@
+# Big Series Keyboard
+
+![Big Series 1-Key](https://woodkeys.click/wp-content/uploads/2017/12/woodkeys_419.jpg)
+
+A PCB for the Big Series Switch by [NovelKeys](https://novelkeys.xyz). Available in 1, 2, 3, and 4 switch versions from [Woodkeys.click](https://woodkeys.click/product-category/big-series/).
+
+Keyboard Maintainer: [Cole Markham](https://github.com/colemarkham) / [Woodkeys.click](https://woodkeys.click)  
+Hardware Supported: Big Series PCBs  
+Hardware Availability:  [Woodkeys.click](https://woodkeys.click), [NovelKeys](https://novelkeys.xyz)  
+
+Make example for this keyboard (after setting up your build environment):
+
+    make bigseries:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/bigseries/rules.mk

@@ -0,0 +1,59 @@
+#SRC += rgb_backlight.c
+
+# MCU name
+MCU = atmega32u2
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE  = no	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE  = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE  = yes	# Console for debug(+400)
+COMMAND_ENABLE  = yes    # Commands for debug and configuration
+SLEEP_LED_ENABLE  = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE  = no		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE  = no  # Custom backlighting code is used, so this should not be enabled
+AUDIO_ENABLE  = no # This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below
+RGBLIGHT_ENABLE  = yes # This can be enabled if a ws2812 strip is connected to the expansion port.
+