alvierahman90/qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Simplify split_common Code significantly (#4772)

Browse Source 
* Eliminate separate slave loop

Both master and slave run the standard keyboard_task main loop now.

* Refactor i2c/serial specific code

Simplify some of the preprocessor mess by using common function names.

* Fix missing #endif

* Move direct pin mapping support from miniaxe to split_common

For boards with more pins than sense--sorry, switches.

* Reordering and reformatting only

* Don't run matrix_scan_quantum on slave side

* Clean up the offset/slaveOffset calculations

* Cut undebounced matrix size in half

* Refactor debouncing

* Minor fixups

* Split split_common transport and debounce code into their own files

Can now be replaced with custom versions per keyboard using
CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes

* Refactor debounce for non-split keyboards too

* Update handwired/xealous to build using new split_common

* Fix debounce breaking basic test

* Dodgy method to allow a split kb to only include one of i2c/serial

SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only
that driver code in the binary.

SPLIT_TRANSPORT = custom (or anything else) will include neither, the
keyboard must supply it's own code

if SPLIT_TRANSPORT is not defined then the original behaviour (include
both avr i2c and serial code) is maintained.

This could be better but it would require explicitly updating all the
existing split keyboards.

* Enable LTO to get lets_split/sockets under the line

* Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE

* Remove avr-specific sei() from split matrix_setup

Not needed now that slave doesn't have a separate main loop.
Both sides (on avr) call sei() in lufa's main() after exiting
keyboard_setup().

* Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT.

* Add comments and fix formatting.
This commit is contained in:
James Churchill 2019-01-18 04:08:14 +10:00 committed by Drashna Jaelre
parent 5fcca9a226
commit 28929ad017
24 changed files with 768 additions and 1378 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

40
common_features.mk
View File

@ -254,20 +254,34 @@ QUANTUM_SRC:= \
$(QUANTUM_DIR)/keymap_common.c \ $(QUANTUM_DIR)/keymap_common.c \
$(QUANTUM_DIR)/keycode_config.c $(QUANTUM_DIR)/keycode_config.c
# Include the standard or split matrix code if needed
ifneq ($(strip $(CUSTOM_MATRIX)), yes)
ifeq ($(strip $(SPLIT_KEYBOARD)), yes) ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
ifneq ($(strip $(CUSTOM_MATRIX)), yes)
QUANTUM_SRC += $(QUANTUM_DIR)/split_common/matrix.c QUANTUM_SRC += $(QUANTUM_DIR)/split_common/matrix.c
# Do not use $(QUANTUM_DIR)/matrix.c. else
CUSTOM_MATRIX=yes
endif
OPT_DEFS += -DSPLIT_KEYBOARD
QUANTUM_SRC += $(QUANTUM_DIR)/split_common/split_flags.c \
$(QUANTUM_DIR)/split_common/split_util.c
QUANTUM_LIB_SRC += $(QUANTUM_DIR)/split_common/i2c.c
QUANTUM_LIB_SRC += $(QUANTUM_DIR)/split_common/serial.c
COMMON_VPATH += $(QUANTUM_PATH)/split_common
endif
ifneq ($(strip $(CUSTOM_MATRIX)), yes)
QUANTUM_SRC += $(QUANTUM_DIR)/matrix.c QUANTUM_SRC += $(QUANTUM_DIR)/matrix.c
endif endif
endif
# Include the standard debounce code if needed
ifneq ($(strip $(CUSTOM_DEBOUNCE)), yes)
QUANTUM_SRC += $(QUANTUM_DIR)/debounce.c
endif
ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
OPT_DEFS += -DSPLIT_KEYBOARD
# Include files used by all split keyboards
QUANTUM_SRC += $(QUANTUM_DIR)/split_common/split_flags.c \
$(QUANTUM_DIR)/split_common/split_util.c
# Determine which (if any) transport files are required
ifneq ($(strip $(SPLIT_TRANSPORT)), custom)
QUANTUM_SRC += $(QUANTUM_DIR)/split_common/transport.c
# Functions added via QUANTUM_LIB_SRC are only included in the final binary if they're called.
# Unused functions are pruned away, which is why we can add both drivers here without bloat.
QUANTUM_LIB_SRC += $(QUANTUM_DIR)/split_common/i2c.c \
$(QUANTUM_DIR)/split_common/serial.c
endif
COMMON_VPATH += $(QUANTUM_PATH)/split_common
endif

7
docs/config_options.md
View File

@ -197,6 +197,9 @@ If you define these options you will enable the associated feature, which may in
Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk
* `SPLIT_TRANSPORT = custom`
* Allows replacing the standard split communication routines with a custom one. ARM based split keyboards must use this at present.
### Setting Handedness ### Setting Handedness
One thing to remember, the side that the USB port is plugged into is always the master half. The side not plugged into USB is the slave. One thing to remember, the side that the USB port is plugged into is always the master half. The side not plugged into USB is the slave.
@ -302,6 +305,10 @@ Use these to enable or disable building certain features. The more you have enab
* Current options are AdafruitEzKey, AdafruitBLE, RN42 * Current options are AdafruitEzKey, AdafruitBLE, RN42
* `SPLIT_KEYBOARD` * `SPLIT_KEYBOARD`
* Enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common * Enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common
* `CUSTOM_MATRIX`
* Allows replacing the standard matrix scanning routine with a custom one.
* `CUSTOM_DEBOUNCE`
* Allows replacing the standard key debouncing routine with a custom one.
* `WAIT_FOR_USB` * `WAIT_FOR_USB`
* Forces the keyboard to wait for a USB connection to be established before it starts up * Forces the keyboard to wait for a USB connection to be established before it starts up
* `NO_USB_STARTUP_CHECK` * `NO_USB_STARTUP_CHECK`

12
docs/getting_started_make_guide.md
View File

@ -135,6 +135,18 @@ This enables [key lock](feature_key_lock.md). This consumes an additional 260 by
This enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common This enables split keyboard support (dual MCU like the let's split and bakingpy's boards) and includes all necessary files located at quantum/split_common
`SPLIT_TRANSPORT`
As there is no standard split communication driver for ARM-based split keyboards yet, `SPLIT_TRANSPORT = custom` must be used for these. It will prevent the standard split keyboard communication code (which is AVR-specific) from being included, allowing a custom implementation to be used.
`CUSTOM_MATRIX`
Lets you replace the default matrix scanning routine with your own code. You will need to provide your own implementations of matrix_init() and matrix_scan().
`CUSTOM_DEBOUNCE`
Lets you replace the default key debouncing routine with your own code. You will need to provide your own implementation of debounce().
## Customizing Makefile Options on a Per-Keymap Basis ## Customizing Makefile Options on a Per-Keymap Basis
If your keymap directory has a file called `rules.mk` any options you set in that file will take precedence over other `rules.mk` options for your particular keyboard. If your keymap directory has a file called `rules.mk` any options you set in that file will take precedence over other `rules.mk` options for your particular keyboard.

63
keyboards/handwired/xealous/debounce.c Normal file
View File

@ -0,0 +1,63 @@
#include <string.h>
#include "config.h"
#include "matrix.h"
#include "timer.h"
#include "quantum.h"
#ifndef DEBOUNCING_DELAY
# define DEBOUNCING_DELAY 5
#endif
//Debouncing counters
typedef uint8_t debounce_counter_t;
#define DEBOUNCE_COUNTER_MODULO 250
#define DEBOUNCE_COUNTER_INACTIVE 251
static debounce_counter_t *debounce_counters;
void debounce_init(uint8_t num_rows)
{
debounce_counters = malloc(num_rows*MATRIX_COLS);
memset(debounce_counters, DEBOUNCE_COUNTER_INACTIVE, num_rows*MATRIX_COLS);
}
void update_debounce_counters(uint8_t num_rows, uint8_t current_time)
{
for (uint8_t row = 0; row < num_rows; row++)
{
for (uint8_t col = 0; col < MATRIX_COLS; col++)
{
if (debounce_counters[row*MATRIX_COLS + col] != DEBOUNCE_COUNTER_INACTIVE)
{
if (TIMER_DIFF(current_time, debounce_counters[row*MATRIX_COLS + col], DEBOUNCE_COUNTER_MODULO) >= DEBOUNCING_DELAY) {
debounce_counters[row*MATRIX_COLS + col] = DEBOUNCE_COUNTER_INACTIVE;
}
}
}
}
}
void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, uint8_t current_time)
{
for (uint8_t row = 0; row < num_rows; row++)
{
matrix_row_t delta = raw[row] ^ cooked[row];
for (uint8_t col = 0; col < MATRIX_COLS; col++)
{
if (debounce_counters[row*MATRIX_COLS + col] == DEBOUNCE_COUNTER_INACTIVE && (delta & (1<<col)))
{
debounce_counters[row*MATRIX_COLS + col] = current_time;
cooked[row] ^= (1 << col);
}
}
}
}
void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool changed)
{
uint8_t current_time = timer_read() % DEBOUNCE_COUNTER_MODULO;
update_debounce_counters(num_rows, current_time);
transfer_matrix_values(raw, cooked, num_rows, current_time);
}

6
keyboards/handwired/xealous/rules.mk
View File

@ -1,4 +1,5 @@
SRC += matrix_scanrate.c matrix.c #SRC += matrix_scanrate.c matrix.c
SRC += debounce.c
# MCU name # MCU name
MCU = atmega32u4 MCU = atmega32u4
@ -66,7 +67,8 @@ SUBPROJECT_rev1 = yes
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
CUSTOM_MATRIX = yes CUSTOM_MATRIX = no
CUSTOM_DEBOUNCE = yes
LAYOUTS = split60 LAYOUTS = split60

9
keyboards/lets_split/sockets/config.h
View File

@ -85,3 +85,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
//#define NO_ACTION_ONESHOT //#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO //#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION //#define NO_ACTION_FUNCTION
#ifdef USE_Link_Time_Optimization
// LTO has issues with macros (action_get_macro) and "functions" (fn_actions),
// so just disable them
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
#define DISABLE_LEADER
#endif // USE_Link_Time_Optimization

2
keyboards/lets_split/sockets/rules.mk
View File

@ -1,3 +1,5 @@
BACKLIGHT_ENABLE = no BACKLIGHT_ENABLE = no
AUDIO_ENABLE = yes AUDIO_ENABLE = yes
RGBLIGHT_ENABLE = yes #Don't enable this along with I2C RGBLIGHT_ENABLE = yes #Don't enable this along with I2C
EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization

5
keyboards/miniaxe/config.h
View File

@ -44,8 +44,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/ */
// #define MATRIX_ROW_PINS { D0, D5 } // #define MATRIX_ROW_PINS { D0, D5 }
// #define MATRIX_COL_PINS { F1, F0, B0 } // #define MATRIX_COL_PINS { F1, F0, B0 }
#define NO_PIN 0xFF #define DIRECT_PINS { \
#define MATRIX_ROW_COL_PINS { \
{ F1, E6, B0, B2, B3 }, \ { F1, E6, B0, B2, B3 }, \
{ F5, F0, B1, B7, D2 }, \ { F5, F0, B1, B7, D2 }, \
{ F6, F7, C7, D5, D3 }, \ { F6, F7, C7, D5, D3 }, \
@ -54,7 +53,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define UNUSED_PINS #define UNUSED_PINS
/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ /* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
#define DIODE_DIRECTION CUSTOM_MATRIX //#define DIODE_DIRECTION CUSTOM_MATRIX
// #define BACKLIGHT_PIN B7 // #define BACKLIGHT_PIN B7
// #define BACKLIGHT_BREATHING // #define BACKLIGHT_BREATHING

641
keyboards/miniaxe/matrix.c
View File

@ -1,641 +0,0 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/*
* scan matrix
*/
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include "wait.h"
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
#include "split_util.h"
#include "pro_micro.h"
#include "config.h"
#include "timer.h"
#include "split_flags.h"
#ifdef BACKLIGHT_ENABLE
# include "backlight.h"
extern backlight_config_t backlight_config;
#endif
#if defined(USE_I2C) || defined(EH)
# include "i2c.h"
#else // USE_SERIAL
# include "serial.h"
#endif
#ifndef DEBOUNCING_DELAY
# define DEBOUNCING_DELAY 5
#endif
#if (DEBOUNCING_DELAY > 0)
static uint16_t debouncing_time;
static bool debouncing = false;
#endif
#if defined(USE_I2C) || defined(EH)
#if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n")
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
# define matrix_bitpop(i) bitpop(matrix[i])
# define ROW_SHIFTER ((uint8_t)1)
#else
# error "Currently only supports 8 COLS"
#endif
#else // USE_SERIAL
#if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n")
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
# define matrix_bitpop(i) bitpop(matrix[i])
# define ROW_SHIFTER ((uint8_t)1)
#elif (MATRIX_COLS <= 16)
# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
# define matrix_bitpop(i) bitpop16(matrix[i])
# define ROW_SHIFTER ((uint16_t)1)
#elif (MATRIX_COLS <= 32)
# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
# define matrix_bitpop(i) bitpop32(matrix[i])
# define ROW_SHIFTER ((uint32_t)1)
#endif
#endif
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
#define ERROR_DISCONNECT_COUNT 5
#define ROWS_PER_HAND (MATRIX_ROWS/2)
static uint8_t error_count = 0;
#if ((DIODE_DIRECTION == COL2ROW) || (DIODE_DIRECTION == ROW2COL))
static uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
static uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
#elif (DIODE_DIRECTION == CUSTOM_MATRIX)
static uint8_t row_col_pins[MATRIX_ROWS][MATRIX_COLS] = MATRIX_ROW_COL_PINS;
#endif
/* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
#if (DIODE_DIRECTION == COL2ROW)
static void init_cols(void);
static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
static void unselect_rows(void);
static void select_row(uint8_t row);
static void unselect_row(uint8_t row);
#elif (DIODE_DIRECTION == ROW2COL)
static void init_rows(void);
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
static void unselect_cols(void);
static void unselect_col(uint8_t col);
static void select_col(uint8_t col);
#elif (DIODE_DIRECTION == CUSTOM_MATRIX)
static void init_cols_rows(void);
static bool read_cols(matrix_row_t current_matrix[], uint8_t current_row);
#endif
__attribute__ ((weak))
void matrix_init_kb(void) {
matrix_init_user();
}
__attribute__ ((weak))
void matrix_scan_kb(void) {
matrix_scan_user();
}
__attribute__ ((weak))
void matrix_init_user(void) {
}
__attribute__ ((weak))
void matrix_scan_user(void) {
}
__attribute__ ((weak))
void matrix_slave_scan_user(void) {
}
inline
uint8_t matrix_rows(void)
{
return MATRIX_ROWS;
}
inline
uint8_t matrix_cols(void)
{
return MATRIX_COLS;
}
void matrix_init(void)
{
#ifdef DISABLE_JTAG
// JTAG disable for PORT F. write JTD bit twice within four cycles.
MCUCR |= (1<<JTD);
MCUCR |= (1<<JTD);
#endif
debug_enable = true;
debug_matrix = true;
debug_mouse = true;
// Set pinout for right half if pinout for that half is defined
if (!isLeftHand) {
#ifdef MATRIX_ROW_PINS_RIGHT
const uint8_t row_pins_right[MATRIX_ROWS] = MATRIX_ROW_PINS_RIGHT;
for (uint8_t i = 0; i < MATRIX_ROWS; i++)
row_pins[i] = row_pins_right[i];
#endif
#ifdef MATRIX_COL_PINS_RIGHT
const uint8_t col_pins_right[MATRIX_COLS] = MATRIX_COL_PINS_RIGHT;
for (uint8_t i = 0; i < MATRIX_COLS; i++)
col_pins[i] = col_pins_right[i];
#endif
}
// initialize row and col
#if (DIODE_DIRECTION == COL2ROW)
unselect_rows();
init_cols();
#elif (DIODE_DIRECTION == ROW2COL)
unselect_cols();
init_rows();
#elif (DIODE_DIRECTION == CUSTOM_MATRIX)
init_cols_rows();
#endif
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
matrix[i] = 0;
matrix_debouncing[i] = 0;
}
matrix_init_quantum();
}
uint8_t _matrix_scan(void)
{
int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
#if (DIODE_DIRECTION == COL2ROW)
// Set row, read cols
for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
# if (DEBOUNCING_DELAY > 0)
bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row);
if (matrix_changed) {
debouncing = true;
debouncing_time = timer_read();
}
# else
read_cols_on_row(matrix+offset, current_row);
# endif
}
#elif (DIODE_DIRECTION == ROW2COL)
// Set col, read rows
for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
# if (DEBOUNCING_DELAY > 0)
bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col);
if (matrix_changed) {
debouncing = true;
debouncing_time = timer_read();
}
# else
read_rows_on_col(matrix+offset, current_col);
# endif
}
#elif (DIODE_DIRECTION == CUSTOM_MATRIX)
// Set row, read cols
for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
# if (DEBOUNCING_DELAY > 0)
bool matrix_changed = read_cols(matrix_debouncing+offset, current_row);
if (matrix_changed) {
debouncing = true;
debouncing_time = timer_read();
}
# else
read_cols(matrix+offset, current_row);
# endif
}
#endif
# if (DEBOUNCING_DELAY > 0)
if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
matrix[i+offset] = matrix_debouncing[i+offset];
}
debouncing = false;
}
# endif
return 1;
}
#if defined(USE_I2C) || defined(EH)
// Get rows from other half over i2c
int i2c_transaction(void) {
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
int err = 0;
// write backlight info
#ifdef BACKLIGHT_ENABLE
if (BACKLIT_DIRTY) {
err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
if (err) goto i2c_error;
// Backlight location
err = i2c_master_write(I2C_BACKLIT_START);
if (err) goto i2c_error;
// Write backlight
i2c_master_write(get_backlight_level());
BACKLIT_DIRTY = false;
}
#endif
err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
if (err) goto i2c_error;
// start of matrix stored at I2C_KEYMAP_START
err = i2c_master_write(I2C_KEYMAP_START);
if (err) goto i2c_error;
// Start read
err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
if (err) goto i2c_error;
if (!err) {
int i;
for (i = 0; i < ROWS_PER_HAND-1; ++i) {
matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
}
matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
i2c_master_stop();
} else {
i2c_error: // the cable is disconnceted, or something else went wrong
i2c_reset_state();
return err;
}
#ifdef RGBLIGHT_ENABLE
if (RGB_DIRTY) {
err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
if (err) goto i2c_error;
// RGB Location
err = i2c_master_write(I2C_RGB_START);
if (err) goto i2c_error;
uint32_t dword = eeconfig_read_rgblight();
// Write RGB
err = i2c_master_write_data(&dword, 4);
if (err) goto i2c_error;
RGB_DIRTY = false;
i2c_master_stop();
}
#endif
return 0;
}
#else // USE_SERIAL
typedef struct _Serial_s2m_buffer_t {
// TODO: if MATRIX_COLS > 8 change to uint8_t packed_matrix[] for pack/unpack
matrix_row_t smatrix[ROWS_PER_HAND];
} Serial_s2m_buffer_t;
volatile Serial_s2m_buffer_t serial_s2m_buffer = {};
volatile Serial_m2s_buffer_t serial_m2s_buffer = {};
uint8_t volatile status0 = 0;
SSTD_t transactions[] = {
{ (uint8_t *)&status0,
sizeof(serial_m2s_buffer), (uint8_t *)&serial_m2s_buffer,
sizeof(serial_s2m_buffer), (uint8_t *)&serial_s2m_buffer
}
};
void serial_master_init(void)
{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); }
void serial_slave_init(void)
{ soft_serial_target_init(transactions, TID_LIMIT(transactions)); }
int serial_transaction(void) {
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
if (soft_serial_transaction()) {
return 1;
}
// TODO: if MATRIX_COLS > 8 change to unpack()
for (int i = 0; i < ROWS_PER_HAND; ++i) {
matrix[slaveOffset+i] = serial_s2m_buffer.smatrix[i];
}
#ifdef RGBLIGHT_ENABLE
// Code to send RGB over serial goes here (not implemented yet)
#endif
#ifdef BACKLIGHT_ENABLE
// Write backlight level for slave to read
serial_m2s_buffer.backlight_level = backlight_config.enable ? backlight_config.level : 0;
#endif
return 0;
}
#endif
uint8_t matrix_scan(void)
{
uint8_t ret = _matrix_scan();
#if defined(USE_I2C) || defined(EH)
if( i2c_transaction() ) {
#else // USE_SERIAL
if( serial_transaction() ) {
#endif
error_count++;
if (error_count > ERROR_DISCONNECT_COUNT) {
// reset other half if disconnected
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
for (int i = 0; i < ROWS_PER_HAND; ++i) {
matrix[slaveOffset+i] = 0;
}
}
} else {
error_count = 0;
}
matrix_scan_quantum();
return ret;
}
void matrix_slave_scan(void) {
_matrix_scan();
int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
#if defined(USE_I2C) || defined(EH)
for (int i = 0; i < ROWS_PER_HAND; ++i) {
i2c_slave_buffer[I2C_KEYMAP_START+i] = matrix[offset+i];
}
#else // USE_SERIAL
// TODO: if MATRIX_COLS > 8 change to pack()
for (int i = 0; i < ROWS_PER_HAND; ++i) {
serial_s2m_buffer.smatrix[i] = matrix[offset+i];
}
#endif
matrix_slave_scan_user();
}
bool matrix_is_modified(void)
{
if (debouncing) return false;
return true;
}
inline
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & ((matrix_row_t)1<<col));
}
inline
matrix_row_t matrix_get_row(uint8_t row)
{
return matrix[row];
}
void matrix_print(void)
{
print("\nr/c 0123456789ABCDEF\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
phex(row); print(": ");
pbin_reverse16(matrix_get_row(row));
print("\n");
}
}
uint8_t matrix_key_count(void)
{
uint8_t count = 0;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
count += bitpop16(matrix[i]);
}
return count;
}
#if (DIODE_DIRECTION == COL2ROW)
static void init_cols(void)
{
for(uint8_t x = 0; x < MATRIX_COLS; x++) {
uint8_t pin = col_pins[x];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
}
static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
{
// Store last value of row prior to reading
matrix_row_t last_row_value = current_matrix[current_row];
// Clear data in matrix row
current_matrix[current_row] = 0;
// Select row and wait for row selecton to stabilize
select_row(current_row);
wait_us(30);
// For each col...
for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
// Select the col pin to read (active low)
uint8_t pin = col_pins[col_index];
uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
// Populate the matrix row with the state of the col pin
current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index);
}
// Unselect row
unselect_row(current_row);
return (last_row_value != current_matrix[current_row]);
}
static void select_row(uint8_t row)
{
uint8_t pin = row_pins[row];
_SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT
_SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
}
static void unselect_row(uint8_t row)
{
uint8_t pin = row_pins[row];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
static void unselect_rows(void)
{
for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
uint8_t pin = row_pins[x];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
}
#elif (DIODE_DIRECTION == ROW2COL)
static void init_rows(void)
{
for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
uint8_t pin = row_pins[x];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
}
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
{
bool matrix_changed = false;
// Select col and wait for col selecton to stabilize
select_col(current_col);
wait_us(30);
// For each row...
for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++)
{
// Store last value of row prior to reading
matrix_row_t last_row_value = current_matrix[row_index];
// Check row pin state
if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
{
// Pin LO, set col bit
current_matrix[row_index] |= (ROW_SHIFTER << current_col);
}
else
{
// Pin HI, clear col bit
current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
}
// Determine if the matrix changed state
if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
{
matrix_changed = true;
}
}
// Unselect col
unselect_col(current_col);
return matrix_changed;
}
static void select_col(uint8_t col)
{
uint8_t pin = col_pins[col];
_SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT
_SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
}
static void unselect_col(uint8_t col)
{
uint8_t pin = col_pins[col];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
static void unselect_cols(void)
{
for(uint8_t x = 0; x < MATRIX_COLS; x++) {
uint8_t pin = col_pins[x];
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
}
}
#elif (DIODE_DIRECTION == CUSTOM_MATRIX)
static void init_cols_rows(void)
{
for(int row = 0; row < MATRIX_ROWS; row++) {
for(int col = 0; col < MATRIX_COLS; col++) {
uint8_t pin = row_col_pins[row][col];
if(pin == NO_PIN) {
continue;
}
// DDxn set 0 for input
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF);
// PORTxn set 1 for input/pullup
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF);
}
}
}
static bool read_cols(matrix_row_t current_matrix[], uint8_t current_row)
{
matrix_row_t last_row_value = current_matrix[current_row];
current_matrix[current_row] = 0;
for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
uint8_t pin = row_col_pins[current_row][col_index];
if(pin == NO_PIN) {
current_matrix[current_row] |= 0;
}
else {
uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index);
}
}
return (last_row_value != current_matrix[current_row]);
}
#endif

3
keyboards/miniaxe/rules.mk
View File

@ -1,4 +1,3 @@
SRC += matrix.c
# MCU name # MCU name
#MCU = at90usb1286 #MCU = at90usb1286
@ -83,6 +82,6 @@ FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
DEBUG_ENABLE = no DEBUG_ENABLE = no
CUSTOM_MATRIX = yes # Use custom matrix code CUSTOM_MATRIX = no # Use custom matrix code
SPLIT_KEYBOARD = yes # Use shared split_common code SPLIT_KEYBOARD = yes # Use shared split_common code

3
quantum/config_common.h
View File

@ -21,6 +21,9 @@
#define ROW2COL 1 #define ROW2COL 1
#define CUSTOM_MATRIX 2 /* Disables built-in matrix scanning code */ #define CUSTOM_MATRIX 2 /* Disables built-in matrix scanning code */
// useful for direct pin mapping
#define NO_PIN (~0)
#ifdef __AVR__ #ifdef __AVR__
#ifndef __ASSEMBLER__ #ifndef __ASSEMBLER__
#include <avr/io.h> #include <avr/io.h>

52
quantum/debounce.c Normal file
View File

@ -0,0 +1,52 @@
#include "matrix.h"
#include "timer.h"
#include "quantum.h"
#ifndef DEBOUNCING_DELAY
# define DEBOUNCING_DELAY 5
#endif
void debounce_init(uint8_t num_rows) {
}
#if DEBOUNCING_DELAY > 0
static bool debouncing = false;
void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool changed) {
static uint16_t debouncing_time;
if (changed) {
debouncing = true;
debouncing_time = timer_read();
}
if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
for (uint8_t i = 0; i < num_rows; i++) {
cooked[i] = raw[i];
}
debouncing = false;
}
}
bool debounce_active(void) {
return debouncing;
}
#else
// no debounce
void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool changed) {
if (changed)
{
for (uint8_t i = 0; i < num_rows; i++) {
cooked[i] = raw[i];
}
}
}
bool debounce_active(void) {
return false;
}
#endif

11
quantum/debounce.h Normal file
View File

@ -0,0 +1,11 @@
#pragma once
// raw is the current key state
// on entry cooked is the previous debounced state
// on exit cooked is the current debounced state
// changed is true if raw has changed since the last call
void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool changed);
bool debounce_active(void);
void debounce_init(uint8_t num_rows);

65
quantum/matrix.c
View File

@ -21,21 +21,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "debug.h" #include "debug.h"
#include "util.h" #include "util.h"
#include "matrix.h" #include "matrix.h"
#include "timer.h" #include "debounce.h"
#include "quantum.h" #include "quantum.h"
/* Set 0 if debouncing isn't needed */
#ifndef DEBOUNCING_DELAY
# define DEBOUNCING_DELAY 5
#endif
#if (DEBOUNCING_DELAY > 0)
static uint16_t debouncing_time;
static bool debouncing = false;
#endif
#if (MATRIX_COLS <= 8) #if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n") # define print_matrix_header() print("\nr/c 01234567\n")
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) # define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
@ -63,9 +51,9 @@ static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
#endif #endif
/* matrix state(1:on, 0:off) */ /* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS]; static matrix_row_t raw_matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS]; static matrix_row_t matrix[MATRIX_ROWS];
#if (DIODE_DIRECTION == COL2ROW) #if (DIODE_DIRECTION == COL2ROW)
@ -157,70 +145,39 @@ void matrix_init(void) {
// initialize matrix state: all keys off // initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) { for (uint8_t i=0; i < MATRIX_ROWS; i++) {
raw_matrix[i] = 0;
matrix[i] = 0; matrix[i] = 0;
matrix_debouncing[i] = 0;
} }
debounce_init(MATRIX_ROWS);
matrix_init_quantum(); matrix_init_quantum();
} }
uint8_t matrix_scan(void) uint8_t matrix_scan(void)
{ {
bool changed = false;
#if (DIODE_DIRECTION == COL2ROW) #if (DIODE_DIRECTION == COL2ROW)
// Set row, read cols // Set row, read cols
for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) {
# if (DEBOUNCING_DELAY > 0) changed |= read_cols_on_row(raw_matrix, current_row);
bool matrix_changed = read_cols_on_row(matrix_debouncing, current_row);
if (matrix_changed) {
debouncing = true;
debouncing_time = timer_read();
} }
# else
read_cols_on_row(matrix, current_row);
# endif
}
#elif (DIODE_DIRECTION == ROW2COL) #elif (DIODE_DIRECTION == ROW2COL)
// Set col, read rows // Set col, read rows
for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
# if (DEBOUNCING_DELAY > 0) changed |= read_rows_on_col(raw_matrix, current_col);
bool matrix_changed = read_rows_on_col(matrix_debouncing, current_col);
if (matrix_changed) {
debouncing = true;
debouncing_time = timer_read();
}
# else
read_rows_on_col(matrix, current_col);
# endif
}
#endif
# if (DEBOUNCING_DELAY > 0)
if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
matrix[i] = matrix_debouncing[i];
}
debouncing = false;
} }
#endif #endif
debounce(raw_matrix, matrix, MATRIX_ROWS, changed);
matrix_scan_quantum(); matrix_scan_quantum();
return 1; return 1;
} }
bool matrix_is_modified(void) bool matrix_is_modified(void)
{ {
#if (DEBOUNCING_DELAY > 0) if (debounce_active()) return false;
if (debouncing) return false;
#endif
return true; return true;
} }

5
quantum/split_common/i2c.h
View File

@ -1,5 +1,4 @@
#ifndef I2C_H #pragma once
#define I2C_H
#include <stdint.h> #include <stdint.h>
@ -58,5 +57,3 @@ extern unsigned char i2c_readNak(void);
extern unsigned char i2c_read(unsigned char ack); extern unsigned char i2c_read(unsigned char ack);
#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak(); #define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak();
#endif

587
quantum/split_common/matrix.c
View File

@ -25,42 +25,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "matrix.h" #include "matrix.h"
#include "split_util.h" #include "split_util.h"
#include "config.h" #include "config.h"
#include "timer.h"
#include "split_flags.h" #include "split_flags.h"
#include "quantum.h" #include "quantum.h"
#include "debounce.h"
#ifdef BACKLIGHT_ENABLE #include "transport.h"
# include "backlight.h"
extern backlight_config_t backlight_config;
#endif
#if defined(USE_I2C) || defined(EH)
# include "i2c.h"
#else // USE_SERIAL
# include "serial.h"
#endif
#ifndef DEBOUNCING_DELAY
# define DEBOUNCING_DELAY 5
#endif
#if (DEBOUNCING_DELAY > 0)
static uint16_t debouncing_time;
static bool debouncing = false;
#endif
#if defined(USE_I2C) || defined(EH)
#if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n")
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
# define matrix_bitpop(i) bitpop(matrix[i])
# define ROW_SHIFTER ((uint8_t)1)
#else
# error "Currently only supports 8 COLS"
#endif
#else // USE_SERIAL
#if (MATRIX_COLS <= 8) #if (MATRIX_COLS <= 8)
# define print_matrix_header() print("\nr/c 01234567\n") # define print_matrix_header() print("\nr/c 01234567\n")
@ -79,370 +47,122 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# define ROW_SHIFTER ((uint32_t)1) # define ROW_SHIFTER ((uint32_t)1)
#endif #endif
#endif
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
#define ERROR_DISCONNECT_COUNT 5 #define ERROR_DISCONNECT_COUNT 5
#define ROWS_PER_HAND (MATRIX_ROWS / 2) #define ROWS_PER_HAND (MATRIX_ROWS / 2)
static uint8_t error_count = 0; #ifdef DIRECT_PINS
static pin_t direct_pins[MATRIX_ROWS][MATRIX_COLS] = DIRECT_PINS;
#else
static pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; static pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
static pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; static pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
#endif
/* matrix state(1:on, 0:off) */ /* matrix state(1:on, 0:off) */
static matrix_row_t matrix[MATRIX_ROWS]; static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS]; static matrix_row_t raw_matrix[ROWS_PER_HAND];
#if (DIODE_DIRECTION == COL2ROW) // row offsets for each hand
static void init_cols(void); uint8_t thisHand, thatHand;
static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
static void unselect_rows(void);
static void select_row(uint8_t row);
static void unselect_row(uint8_t row);
#elif (DIODE_DIRECTION == ROW2COL)
static void init_rows(void);
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
static void unselect_cols(void);
static void unselect_col(uint8_t col);
static void select_col(uint8_t col);
#endif
__attribute__ ((weak)) // user-defined overridable functions
void matrix_init_kb(void) {
matrix_init_user();
}
__attribute__ ((weak)) __attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); }
void matrix_scan_kb(void) {
matrix_scan_user();
}
__attribute__ ((weak)) __attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); }
void matrix_init_user(void) {
}
__attribute__ ((weak)) __attribute__((weak)) void matrix_init_user(void) {}
void matrix_scan_user(void) {
}
__attribute__ ((weak)) __attribute__((weak)) void matrix_scan_user(void) {}
void matrix_slave_scan_user(void) {
}
inline __attribute__((weak)) void matrix_slave_scan_user(void) {}
uint8_t matrix_rows(void)
{
return MATRIX_ROWS;
}
inline // helper functions
uint8_t matrix_cols(void)
{
return MATRIX_COLS;
}
void matrix_init(void) inline uint8_t matrix_rows(void) { return MATRIX_ROWS; }
{
debug_enable = true;
debug_matrix = true;
debug_mouse = true;
// Set pinout for right half if pinout for that half is defined inline uint8_t matrix_cols(void) { return MATRIX_COLS; }
if (!isLeftHand) {
#ifdef MATRIX_ROW_PINS_RIGHT
const uint8_t row_pins_right[MATRIX_ROWS] = MATRIX_ROW_PINS_RIGHT;
for (uint8_t i = 0; i < MATRIX_ROWS; i++)
row_pins[i] = row_pins_right[i];
#endif
#ifdef MATRIX_COL_PINS_RIGHT
const uint8_t col_pins_right[MATRIX_COLS] = MATRIX_COL_PINS_RIGHT;
for (uint8_t i = 0; i < MATRIX_COLS; i++)
col_pins[i] = col_pins_right[i];
#endif
}
// initialize row and col bool matrix_is_modified(void) {
#if (DIODE_DIRECTION == COL2ROW) if (debounce_active()) return false;
unselect_rows();
init_cols();
#elif (DIODE_DIRECTION == ROW2COL)
unselect_cols();
init_rows();
#endif
// initialize matrix state: all keys off
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
matrix[i] = 0;
matrix_debouncing[i] = 0;
}
matrix_init_quantum();
}
uint8_t _matrix_scan(void)
{
int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
#if (DIODE_DIRECTION == COL2ROW)
// Set row, read cols
for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
# if (DEBOUNCING_DELAY > 0)
bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row);
if (matrix_changed) {
debouncing = true;
debouncing_time = timer_read();
}
# else
read_cols_on_row(matrix+offset, current_row);
# endif
}
#elif (DIODE_DIRECTION == ROW2COL)
// Set col, read rows
for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
# if (DEBOUNCING_DELAY > 0)
bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col);
if (matrix_changed) {
debouncing = true;
debouncing_time = timer_read();
}
# else
read_rows_on_col(matrix+offset, current_col);
# endif
}
#endif
# if (DEBOUNCING_DELAY > 0)
if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
matrix[i+offset] = matrix_debouncing[i+offset];
}
debouncing = false;
}
# endif
return 1;
}
#if defined(USE_I2C) || defined(EH)
// Get rows from other half over i2c
int i2c_transaction(void) {
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
int err = 0;
// write backlight info
#ifdef BACKLIGHT_ENABLE
if (BACKLIT_DIRTY) {
err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
if (err) goto i2c_error;
// Backlight location
err = i2c_master_write(I2C_BACKLIT_START);
if (err) goto i2c_error;
// Write backlight
i2c_master_write(get_backlight_level());
BACKLIT_DIRTY = false;
}
#endif
err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
if (err) goto i2c_error;
// start of matrix stored at I2C_KEYMAP_START
err = i2c_master_write(I2C_KEYMAP_START);
if (err) goto i2c_error;
// Start read
err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
if (err) goto i2c_error;
if (!err) {
int i;
for (i = 0; i < ROWS_PER_HAND-1; ++i) {
matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
}
matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
i2c_master_stop();
} else {
i2c_error: // the cable is disconnceted, or something else went wrong
i2c_reset_state();
return err;
}
#ifdef RGBLIGHT_ENABLE
if (RGB_DIRTY) {
err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
if (err) goto i2c_error;
// RGB Location
err = i2c_master_write(I2C_RGB_START);
if (err) goto i2c_error;
uint32_t dword = eeconfig_read_rgblight();
// Write RGB
err = i2c_master_write_data(&dword, 4);
if (err) goto i2c_error;
RGB_DIRTY = false;
i2c_master_stop();
}
#endif
return 0;
}
#else // USE_SERIAL
typedef struct _Serial_s2m_buffer_t {
// TODO: if MATRIX_COLS > 8 change to uint8_t packed_matrix[] for pack/unpack
matrix_row_t smatrix[ROWS_PER_HAND];
} Serial_s2m_buffer_t;
volatile Serial_s2m_buffer_t serial_s2m_buffer = {};
volatile Serial_m2s_buffer_t serial_m2s_buffer = {};
uint8_t volatile status0 = 0;
SSTD_t transactions[] = {
{ (uint8_t *)&status0,
sizeof(serial_m2s_buffer), (uint8_t *)&serial_m2s_buffer,
sizeof(serial_s2m_buffer), (uint8_t *)&serial_s2m_buffer
}
};
void serial_master_init(void)
{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); }
void serial_slave_init(void)
{ soft_serial_target_init(transactions, TID_LIMIT(transactions)); }
int serial_transaction(void) {
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
if (soft_serial_transaction()) {
return 1;
}
// TODO: if MATRIX_COLS > 8 change to unpack()
for (int i = 0; i < ROWS_PER_HAND; ++i) {
matrix[slaveOffset+i] = serial_s2m_buffer.smatrix[i];
}
#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
// Code to send RGB over serial goes here (not implemented yet)
#endif
#ifdef BACKLIGHT_ENABLE
// Write backlight level for slave to read
serial_m2s_buffer.backlight_level = backlight_config.enable ? backlight_config.level : 0;
#endif
return 0;
}
#endif
uint8_t matrix_scan(void)
{
uint8_t ret = _matrix_scan();
#if defined(USE_I2C) || defined(EH)
if( i2c_transaction() ) {
#else // USE_SERIAL
if( serial_transaction() ) {
#endif
error_count++;
if (error_count > ERROR_DISCONNECT_COUNT) {
// reset other half if disconnected
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
for (int i = 0; i < ROWS_PER_HAND; ++i) {
matrix[slaveOffset+i] = 0;
}
}
} else {
error_count = 0;
}
matrix_scan_quantum();
return ret;
}
void matrix_slave_scan(void) {
_matrix_scan();
int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
#if defined(USE_I2C) || defined(EH)
for (int i = 0; i < ROWS_PER_HAND; ++i) {
i2c_slave_buffer[I2C_KEYMAP_START+i] = matrix[offset+i];
}
#else // USE_SERIAL
// TODO: if MATRIX_COLS > 8 change to pack()
for (int i = 0; i < ROWS_PER_HAND; ++i) {
serial_s2m_buffer.smatrix[i] = matrix[offset+i];
}
#endif
matrix_slave_scan_user();
}
bool matrix_is_modified(void)
{
if (debouncing) return false;
return true; return true;
} }
inline inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & ((matrix_row_t)1 << col)); }
bool matrix_is_on(uint8_t row, uint8_t col)
{
return (matrix[row] & ((matrix_row_t)1<<col));
}
inline inline matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; }
matrix_row_t matrix_get_row(uint8_t row)
{ void matrix_print(void) {
return matrix[row]; print_matrix_header();
}
void matrix_print(void)
{
print("\nr/c 0123456789ABCDEF\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) { for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
phex(row); print(": "); phex(row);
pbin_reverse16(matrix_get_row(row)); print(": ");
print_matrix_row(row);
print("\n"); print("\n");
} }
} }
uint8_t matrix_key_count(void) uint8_t matrix_key_count(void) {
{
uint8_t count = 0; uint8_t count = 0;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) { for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
count += bitpop16(matrix[i]); count += matrix_bitpop(i);
} }
return count; return count;
} }
#if (DIODE_DIRECTION == COL2ROW) // matrix code
static void init_cols(void) #ifdef DIRECT_PINS
{
static void init_pins(void) {
for (int row = 0; row < MATRIX_ROWS; row++) {
for (int col = 0; col < MATRIX_COLS; col++) {
pin_t pin = direct_pins[row][col];
if (pin != NO_PIN) {
setPinInputHigh(pin);
}
}
}
}
static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) {
matrix_row_t last_row_value = current_matrix[current_row];
current_matrix[current_row] = 0;
for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
pin_t pin = direct_pins[current_row][col_index];
if (pin != NO_PIN) {
current_matrix[current_row] |= readPin(pin) ? 0 : (ROW_SHIFTER << col_index);
}
}
return (last_row_value != current_matrix[current_row]);
}
#elif (DIODE_DIRECTION == COL2ROW)
static void select_row(uint8_t row) {
writePinLow(row_pins[row]);
setPinOutput(row_pins[row]);
}
static void unselect_row(uint8_t row) { setPinInputHigh(row_pins[row]); }
static void unselect_rows(void) {
for (uint8_t x = 0; x < ROWS_PER_HAND; x++) {
setPinInputHigh(row_pins[x]);
}
}
static void init_pins(void) {
unselect_rows();
for (uint8_t x = 0; x < MATRIX_COLS; x++) { for (uint8_t x = 0; x < MATRIX_COLS; x++) {
setPinInputHigh(col_pins[x]); setPinInputHigh(col_pins[x]);
} }
} }
static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) {
{
// Store last value of row prior to reading // Store last value of row prior to reading
matrix_row_t last_row_value = current_matrix[current_row]; matrix_row_t last_row_value = current_matrix[current_row];
@ -465,35 +185,29 @@ static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
return (last_row_value != current_matrix[current_row]); return (last_row_value != current_matrix[current_row]);
} }
static void select_row(uint8_t row)
{
writePinLow(row_pins[row]);
setPinOutput(row_pins[row]);
}
static void unselect_row(uint8_t row)
{
setPinInputHigh(row_pins[row]);
}
static void unselect_rows(void)
{
for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
setPinInputHigh(row_pins[x]);
}
}
#elif (DIODE_DIRECTION == ROW2COL) #elif (DIODE_DIRECTION == ROW2COL)
static void init_rows(void) static void select_col(uint8_t col) {
{ writePinLow(col_pins[col]);
setPinOutput(col_pins[col]);
}
static void unselect_col(uint8_t col) { setPinInputHigh(col_pins[col]); }
static void unselect_cols(void) {
for (uint8_t x = 0; x < MATRIX_COLS; x++) {
setPinInputHigh(col_pins[x]);
}
}
static void init_pins(void) {
unselect_cols();
for (uint8_t x = 0; x < ROWS_PER_HAND; x++) { for (uint8_t x = 0; x < ROWS_PER_HAND; x++) {
setPinInputHigh(row_pins[x]); setPinInputHigh(row_pins[x]);
} }
} }
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) {
{
bool matrix_changed = false; bool matrix_changed = false;
// Select col and wait for col selecton to stabilize // Select col and wait for col selecton to stabilize
@ -501,27 +215,21 @@ static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
wait_us(30); wait_us(30);
// For each row... // For each row...
for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++) for (uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++) {
{
// Store last value of row prior to reading // Store last value of row prior to reading
matrix_row_t last_row_value = current_matrix[row_index]; matrix_row_t last_row_value = current_matrix[row_index];
// Check row pin state // Check row pin state
if (readPin(row_pins[row_index])) if (readPin(row_pins[row_index])) {
{
// Pin HI, clear col bit // Pin HI, clear col bit
current_matrix[row_index] &= ~(ROW_SHIFTER << current_col); current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
} } else {
else
{
// Pin LO, set col bit // Pin LO, set col bit
current_matrix[row_index] |= (ROW_SHIFTER << current_col); current_matrix[row_index] |= (ROW_SHIFTER << current_col);
} }
// Determine if the matrix changed state // Determine if the matrix changed state
if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) {
{
matrix_changed = true; matrix_changed = true;
} }
} }
@ -532,22 +240,89 @@ static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
return matrix_changed; return matrix_changed;
} }
static void select_col(uint8_t col)
{
writePinLow(col_pins[col]);
setPinOutput(col_pins[col]);
}
static void unselect_col(uint8_t col)
{
setPinInputHigh(col_pins[col]);
}
static void unselect_cols(void)
{
for(uint8_t x = 0; x < MATRIX_COLS; x++) {
setPinInputHigh(col_pins[x]);
}
}
#endif #endif
void matrix_init(void) {
debug_enable = true;
debug_matrix = true;
debug_mouse = true;
// Set pinout for right half if pinout for that half is defined
if (!isLeftHand) {
#ifdef MATRIX_ROW_PINS_RIGHT
const uint8_t row_pins_right[MATRIX_ROWS] = MATRIX_ROW_PINS_RIGHT;
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
row_pins[i] = row_pins_right[i];
}
#endif
#ifdef MATRIX_COL_PINS_RIGHT
const uint8_t col_pins_right[MATRIX_COLS] = MATRIX_COL_PINS_RIGHT;
for (uint8_t i = 0; i < MATRIX_COLS; i++) {
col_pins[i] = col_pins_right[i];
}
#endif
}
thisHand = isLeftHand ? 0 : (ROWS_PER_HAND);
thatHand = ROWS_PER_HAND - thisHand;
// initialize key pins
init_pins();
// initialize matrix state: all keys off
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
matrix[i] = 0;
}
debounce_init(ROWS_PER_HAND);
matrix_init_quantum();
}
uint8_t _matrix_scan(void) {
bool changed = false;
#if defined(DIRECT_PINS) || (DIODE_DIRECTION == COL2ROW)
// Set row, read cols
for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
changed |= read_cols_on_row(raw_matrix, current_row);
}
#elif (DIODE_DIRECTION == ROW2COL)
// Set col, read rows
for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
changed |= read_rows_on_col(raw_matrix, current_col);
}
#endif
debounce(raw_matrix, matrix + thisHand, ROWS_PER_HAND, changed);
return 1;
}
uint8_t matrix_scan(void) {
uint8_t ret = _matrix_scan();
if (is_keyboard_master()) {
static uint8_t error_count;
if (!transport_master(matrix + thatHand)) {
error_count++;
if (error_count > ERROR_DISCONNECT_COUNT) {
// reset other half if disconnected
for (int i = 0; i < ROWS_PER_HAND; ++i) {
matrix[thatHand + i] = 0;
}
}
} else {
error_count = 0;
}
matrix_scan_quantum();
} else {
transport_slave(matrix + thisHand);
matrix_slave_scan_user();
}
return ret;
}

30
quantum/split_common/matrix.h
View File

@ -1,31 +1,3 @@
#ifndef SPLIT_COMMON_MATRIX_H #pragma once
#define SPLIT_COMMON_MATRIX_H
#include <common/matrix.h> #include <common/matrix.h>
#ifdef RGBLIGHT_ENABLE
# include "rgblight.h"
#endif
typedef struct _Serial_m2s_buffer_t {
#ifdef BACKLIGHT_ENABLE
uint8_t backlight_level;
#endif
#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
rgblight_config_t rgblight_config; //not yet use
//
// When MCUs on both sides drive their respective RGB LED chains,
// it is necessary to synchronize, so it is necessary to communicate RGB information.
// In that case, define the RGBLIGHT_SPLIT macro.
//
// Otherwise, if the master side MCU drives both sides RGB LED chains,
// there is no need to communicate.
#endif
} Serial_m2s_buffer_t;
extern volatile Serial_m2s_buffer_t serial_m2s_buffer;
void serial_master_init(void);
void serial_slave_init(void);
#endif

5
quantum/split_common/serial.h
View File

@ -1,5 +1,4 @@
#ifndef SOFT_SERIAL_H #pragma once
#define SOFT_SERIAL_H
#include <stdbool.h> #include <stdbool.h>
@ -61,5 +60,3 @@ int soft_serial_transaction(int sstd_index);
#ifdef SERIAL_USE_MULTI_TRANSACTION #ifdef SERIAL_USE_MULTI_TRANSACTION
int soft_serial_get_and_clean_status(int sstd_index); int soft_serial_get_and_clean_status(int sstd_index);
#endif #endif
#endif /* SOFT_SERIAL_H */

7
quantum/split_common/split_flags.h
View File

@ -1,5 +1,4 @@
#ifndef SPLIT_FLAGS_H #pragma once
#define SPLIT_FLAGS_H
#include <stdbool.h> #include <stdbool.h>
#include <stdint.h> #include <stdint.h>
@ -14,7 +13,3 @@ extern volatile bool RGB_DIRTY;
//Backlight Stuff //Backlight Stuff
extern volatile bool BACKLIT_DIRTY; extern volatile bool BACKLIT_DIRTY;
#endif

142
quantum/split_common/split_util.c
View File

@ -4,142 +4,84 @@
#include "config.h" #include "config.h"
#include "timer.h" #include "timer.h"
#include "split_flags.h" #include "split_flags.h"
#include "transport.h"
#include "quantum.h" #include "quantum.h"
#ifdef EE_HANDS #ifdef EE_HANDS
# include "tmk_core/common/eeprom.h" # include "tmk_core/common/eeprom.h"
#endif # include "eeconfig.h"
#ifdef BACKLIGHT_ENABLE
# include "backlight.h"
#endif
#if defined(USE_I2C) || defined(EH)
# include "i2c.h"
#endif #endif
volatile bool isLeftHand = true; volatile bool isLeftHand = true;
volatile uint8_t setTries = 0; __attribute__((weak))
bool is_keyboard_left(void) {
static void setup_handedness(void) {
#ifdef SPLIT_HAND_PIN #ifdef SPLIT_HAND_PIN
// Test pin SPLIT_HAND_PIN for High/Low, if low it's right hand // Test pin SPLIT_HAND_PIN for High/Low, if low it's right hand
setPinInput(SPLIT_HAND_PIN); setPinInput(SPLIT_HAND_PIN);
isLeftHand = readPin(SPLIT_HAND_PIN); return readPin(SPLIT_HAND_PIN);
#else #else
#ifdef EE_HANDS #ifdef EE_HANDS
isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); return eeprom_read_byte(EECONFIG_HANDEDNESS);
#else #else
#ifdef MASTER_RIGHT #ifdef MASTER_RIGHT
isLeftHand = !has_usb(); return !is_keyboard_master();
#else #else
isLeftHand = has_usb(); return is_keyboard_master();
#endif #endif
#endif #endif
#endif #endif
} }
bool is_keyboard_master(void)
{
#ifdef __AVR__
static enum { UNKNOWN, MASTER, SLAVE } usbstate = UNKNOWN;
// only check once, as this is called often
if (usbstate == UNKNOWN)
{
USBCON |= (1 << OTGPADE); // enables VBUS pad
wait_us(5);
usbstate = (USBSTA & (1 << VBUS)) ? MASTER : SLAVE; // checks state of VBUS
}
return (usbstate == MASTER);
#else
return true;
#endif
}
static void keyboard_master_setup(void) { static void keyboard_master_setup(void) {
#if defined(USE_I2C) || defined(EH) #if defined(USE_I2C) || defined(EH)
i2c_master_init();
#ifdef SSD1306OLED #ifdef SSD1306OLED
matrix_master_OLED_init (); matrix_master_OLED_init ();
#endif #endif
#else
serial_master_init();
#endif #endif
transport_master_init();
// For master the Backlight info needs to be sent on startup // For master the Backlight info needs to be sent on startup
// Otherwise the salve won't start with the proper info until an update // Otherwise the salve won't start with the proper info until an update
BACKLIT_DIRTY = true; BACKLIT_DIRTY = true;
} }
static void keyboard_slave_setup(void) { static void keyboard_slave_setup(void)
timer_init(); {
#if defined(USE_I2C) || defined(EH) transport_slave_init();
i2c_slave_init(SLAVE_I2C_ADDRESS);
#else
serial_slave_init();
#endif
}
bool has_usb(void) {
USBCON |= (1 << OTGPADE); //enables VBUS pad
_delay_us(5);
return (USBSTA & (1<<VBUS)); //checks state of VBUS
}
void split_keyboard_setup(void) {
setup_handedness();
if (has_usb()) {
keyboard_master_setup();
} else {
keyboard_slave_setup();
}
sei();
}
void keyboard_slave_loop(void) {
matrix_init();
//Init RGB
#ifdef RGBLIGHT_ENABLE
rgblight_init();
#endif
while (1) {
// Matrix Slave Scan
matrix_slave_scan();
// Read Backlight Info
#ifdef BACKLIGHT_ENABLE
#ifdef USE_I2C
if (BACKLIT_DIRTY) {
backlight_set(i2c_slave_buffer[I2C_BACKLIT_START]);
BACKLIT_DIRTY = false;
}
#else // USE_SERIAL
backlight_set(serial_m2s_buffer.backlight_level);
#endif
#endif
// Read RGB Info
#ifdef RGBLIGHT_ENABLE
#ifdef USE_I2C
if (RGB_DIRTY) {
// Disable interupts (RGB data is big)
cli();
// Create new DWORD for RGB data
uint32_t dword;
// Fill the new DWORD with the data that was sent over
uint8_t *dword_dat = (uint8_t *)(&dword);
for (int i = 0; i < 4; i++) {
dword_dat[i] = i2c_slave_buffer[I2C_RGB_START+i];
}
// Update the RGB now with the new data and set RGB_DIRTY to false
rgblight_update_dword(dword);
RGB_DIRTY = false;
// Re-enable interupts now that RGB is set
sei();
}
#else // USE_SERIAL
#ifdef RGBLIGHT_SPLIT
// Add serial implementation for RGB here
#endif
#endif
#endif
}
} }
// this code runs before the usb and keyboard is initialized // this code runs before the usb and keyboard is initialized
void matrix_setup(void) { void matrix_setup(void)
split_keyboard_setup(); {
isLeftHand = is_keyboard_left();
if (!has_usb()) { if (is_keyboard_master())
//rgblight_init(); {
keyboard_slave_loop(); keyboard_master_setup();
}
else
{
keyboard_slave_setup();
} }
} }

15
quantum/split_common/split_util.h
View File

@ -1,23 +1,10 @@
#ifndef SPLIT_KEYBOARD_UTIL_H #pragma once
#define SPLIT_KEYBOARD_UTIL_H
#include <stdbool.h> #include <stdbool.h>
#include <stdint.h> #include <stdint.h>
#include <stdio.h> #include <stdio.h>
#include <stdlib.h> #include <stdlib.h>
#include "eeconfig.h"
#define SLAVE_I2C_ADDRESS 0x32
extern volatile bool isLeftHand; extern volatile bool isLeftHand;
// slave version of matix scan, defined in matrix.c
void matrix_slave_scan(void);
void split_keyboard_setup(void);
bool has_usb(void);
void keyboard_slave_loop(void);
void matrix_master_OLED_init (void); void matrix_master_OLED_init (void);
#endif

224
quantum/split_common/transport.c Normal file
View File

@ -0,0 +1,224 @@
#include "config.h"
#include "matrix.h"
#include "quantum.h"
#define ROWS_PER_HAND (MATRIX_ROWS/2)
#ifdef RGBLIGHT_ENABLE
# include "rgblight.h"
#endif
#ifdef BACKLIGHT_ENABLE
# include "backlight.h"
extern backlight_config_t backlight_config;
#endif
#if defined(USE_I2C) || defined(EH)
#include "i2c.h"
#ifndef SLAVE_I2C_ADDRESS
# define SLAVE_I2C_ADDRESS 0x32
#endif
#if (MATRIX_COLS > 8)
# error "Currently only supports 8 COLS"
#endif
// Get rows from other half over i2c
bool transport_master(matrix_row_t matrix[]) {
int err = 0;
// write backlight info
#ifdef BACKLIGHT_ENABLE
if (BACKLIT_DIRTY) {
err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
if (err) { goto i2c_error; }
// Backlight location
err = i2c_master_write(I2C_BACKLIT_START);
if (err) { goto i2c_error; }
// Write backlight
i2c_master_write(get_backlight_level());
BACKLIT_DIRTY = false;
}
#endif
err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
if (err) { goto i2c_error; }
// start of matrix stored at I2C_KEYMAP_START
err = i2c_master_write(I2C_KEYMAP_START);
if (err) { goto i2c_error; }
// Start read
err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
if (err) { goto i2c_error; }
if (!err) {
int i;
for (i = 0; i < ROWS_PER_HAND-1; ++i) {
matrix[i] = i2c_master_read(I2C_ACK);
}
matrix[i] = i2c_master_read(I2C_NACK);
i2c_master_stop();
} else {
i2c_error: // the cable is disconnceted, or something else went wrong
i2c_reset_state();
return false;
}
#ifdef RGBLIGHT_ENABLE
if (RGB_DIRTY) {
err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
if (err) { goto i2c_error; }
// RGB Location
err = i2c_master_write(I2C_RGB_START);
if (err) { goto i2c_error; }
uint32_t dword = eeconfig_read_rgblight();
// Write RGB
err = i2c_master_write_data(&dword, 4);
if (err) { goto i2c_error; }
RGB_DIRTY = false;
i2c_master_stop();
}
#endif
return true;
}
void transport_slave(matrix_row_t matrix[]) {
for (int i = 0; i < ROWS_PER_HAND; ++i)
{
i2c_slave_buffer[I2C_KEYMAP_START + i] = matrix[i];
}
// Read Backlight Info
#ifdef BACKLIGHT_ENABLE
if (BACKLIT_DIRTY)
{
backlight_set(i2c_slave_buffer[I2C_BACKLIT_START]);
BACKLIT_DIRTY = false;
}
#endif
#ifdef RGBLIGHT_ENABLE
if (RGB_DIRTY)
{
// Disable interupts (RGB data is big)
cli();
// Create new DWORD for RGB data
uint32_t dword;
// Fill the new DWORD with the data that was sent over
uint8_t * dword_dat = (uint8_t *)(&dword);
for (int i = 0; i < 4; i++)
{
dword_dat[i] = i2c_slave_buffer[I2C_RGB_START + i];
}
// Update the RGB now with the new data and set RGB_DIRTY to false
rgblight_update_dword(dword);
RGB_DIRTY = false;
// Re-enable interupts now that RGB is set
sei();
}
#endif
}
void transport_master_init(void) {
i2c_master_init();
}
void transport_slave_init(void) {
i2c_slave_init(SLAVE_I2C_ADDRESS);
}
#else // USE_SERIAL
#include "serial.h"
typedef struct _Serial_s2m_buffer_t {
// TODO: if MATRIX_COLS > 8 change to uint8_t packed_matrix[] for pack/unpack
matrix_row_t smatrix[ROWS_PER_HAND];
} Serial_s2m_buffer_t;
typedef struct _Serial_m2s_buffer_t {
#ifdef BACKLIGHT_ENABLE
uint8_t backlight_level;
#endif
#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
rgblight_config_t rgblight_config; //not yet use
//
// When MCUs on both sides drive their respective RGB LED chains,
// it is necessary to synchronize, so it is necessary to communicate RGB information.
// In that case, define the RGBLIGHT_SPLIT macro.
//
// Otherwise, if the master side MCU drives both sides RGB LED chains,
// there is no need to communicate.
#endif
} Serial_m2s_buffer_t;
volatile Serial_s2m_buffer_t serial_s2m_buffer = {};
volatile Serial_m2s_buffer_t serial_m2s_buffer = {};
uint8_t volatile status0 = 0;
SSTD_t transactions[] = {
{ (uint8_t *)&status0,
sizeof(serial_m2s_buffer), (uint8_t *)&serial_m2s_buffer,
sizeof(serial_s2m_buffer), (uint8_t *)&serial_s2m_buffer
}
};
void transport_master_init(void)
{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); }
void transport_slave_init(void)
{ soft_serial_target_init(transactions, TID_LIMIT(transactions)); }
bool transport_master(matrix_row_t matrix[]) {
if (soft_serial_transaction()) {
return false;
}
// TODO: if MATRIX_COLS > 8 change to unpack()
for (int i = 0; i < ROWS_PER_HAND; ++i) {
matrix[i] = serial_s2m_buffer.smatrix[i];
}
#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
// Code to send RGB over serial goes here (not implemented yet)
#endif
#ifdef BACKLIGHT_ENABLE
// Write backlight level for slave to read
serial_m2s_buffer.backlight_level = backlight_config.enable ? backlight_config.level : 0;
#endif
return true;
}
void transport_slave(matrix_row_t matrix[]) {
// TODO: if MATRIX_COLS > 8 change to pack()
for (int i = 0; i < ROWS_PER_HAND; ++i)
{
serial_s2m_buffer.smatrix[i] = matrix[i];
}
#ifdef BACKLIGHT_ENABLE
backlight_set(serial_m2s_buffer.backlight_level);
#endif
#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
// Add serial implementation for RGB here
#endif
}
#endif

10
quantum/split_common/transport.h Normal file
View File

@ -0,0 +1,10 @@
#pragma once
#include <common/matrix.h>
void transport_master_init(void);
void transport_slave_init(void);
// returns false if valid data not received from slave
bool transport_master(matrix_row_t matrix[]);
void transport_slave(matrix_row_t matrix[]);

2
tmk_core/common/keyboard.h
View File

@ -67,6 +67,8 @@ void keyboard_init(void);
void keyboard_task(void); void keyboard_task(void);
/* it runs when host LED status is updated */ /* it runs when host LED status is updated */
void keyboard_set_leds(uint8_t leds); void keyboard_set_leds(uint8_t leds);
/* it runs whenever code has to behave differently on a slave */
bool is_keyboard_master(void);
#ifdef __cplusplus #ifdef __cplusplus
} }