alvierahman90/qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Simplify NIBBLE encoder code and clean up keymaps (#11808)

Browse Source 
* Simplify encoder code and clean up keymaps.

-Removed overly complex VIA encoder code. It wasn't adding any value and was confusing users who were trying to customize encoder functionality on VIA keymaps.
-Replaced KC_TILDE with KC_HOME in all keymaps, as KC_TILDE sends a left shift, which was confusing some folks as they tested their build.
-Move layer names to enum

* Change encoder_update_kb to encoder_update_user per PR feedback
This commit is contained in:
Jay Greco 2021-02-09 06:50:16 -08:00 committed by GitHub
parent 627ceebef3
commit 4107856b70
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
10 changed files with 77 additions and 436 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
keyboards/nullbitsco/nibble/keymaps/default/keymap.c
View File

@ -15,8 +15,10 @@
*/
#include QMK_KEYBOARD_H
#define _MA 0
#define _FN 1
enum layer_names {
_MA,
_FN
};
enum custom_keycodes {
KC_CUST = SAFE_RANGE,
@ -24,14 +26,14 @@ enum custom_keycodes {
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_MA] = LAYOUT_ansi(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_TILD,
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME,
KC_F13, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
KC_F14, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
KC_F15, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
KC_F16, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN), KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
),
[_FN] = LAYOUT_ansi(
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, KC_INS,
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_END,
RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
@ -103,7 +105,7 @@ void change_RGB(bool clockwise) {
}
}
void encoder_update_kb(uint8_t index, bool clockwise) {
void encoder_update_user(uint8_t index, bool clockwise) {
if (layer_state_is(1)) {
//change RGB settings
change_RGB(clockwise);

8
keyboards/nullbitsco/nibble/keymaps/iso/keymap.c
View File

@ -15,8 +15,10 @@
*/
#include QMK_KEYBOARD_H
#define _MA 0
#define _FN 1
enum layer_names {
_MA,
_FN
};
enum custom_keycodes {
KC_CUST = SAFE_RANGE,
@ -103,7 +105,7 @@ void change_RGB(bool clockwise) {
}
}
void encoder_update_kb(uint8_t index, bool clockwise) {
void encoder_update_user(uint8_t index, bool clockwise) {
if (layer_state_is(1)) {
//change RGB settings
change_RGB(clockwise);

12
keyboards/nullbitsco/nibble/keymaps/oled/keymap.c
View File

@ -15,8 +15,10 @@
*/
#include QMK_KEYBOARD_H
#define _MA 0
#define _FN 1
enum layer_names {
_MA,
_FN
};
enum custom_keycodes {
KC_CUST = SAFE_RANGE,
@ -24,14 +26,14 @@ enum custom_keycodes {
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_MA] = LAYOUT_ansi(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_TILD,
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME,
KC_F13, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL,
KC_F14, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
KC_F15, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
KC_F16, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN), KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
),
[_FN] = LAYOUT_ansi(
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, KC_INS,
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_END,
RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
@ -120,7 +122,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
}
void encoder_update_kb(uint8_t index, bool clockwise) {
void encoder_update_user(uint8_t index, bool clockwise) {
if (clockwise) {
tap_code(KC_VOLU);
} else {

21
keyboards/nullbitsco/nibble/keymaps/via/config.h
View File

@ -1,21 +0,0 @@
/* Copyright 2020 Jay Greco
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
// Custom config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
// Custom config Usage:
// 1 for enabled encoder modes (1 byte)
// 6 for 3x custom encoder settings, left, right, and press (18 bytes)
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 19

22
keyboards/nullbitsco/nibble/keymaps/via/keymap.c
View File

@ -14,12 +14,13 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
#include "via_extras.h"
#define _BASE 0
#define _VIA1 1
#define _VIA2 2
#define _VIA3 3
enum layer_names {
_BASE,
_VIA1,
_VIA2,
_VIA3
};
#define KC_DISC_MUTE KC_F23
#define KC_DISC_DEAF KC_F24
@ -50,7 +51,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
),
[_VIA1] = LAYOUT_all(
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_HOME, KC_INS,
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_END,
RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
@ -147,6 +148,15 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return true;
}
void encoder_update_user(uint8_t index, bool clockwise) {
// Encoder is mapped to volume functions by default
if (clockwise) {
tap_code(KC_VOLU);
} else {
tap_code(KC_VOLD);
}
}
void matrix_init_user(void) {
// Initialize remote keyboard, if connected (see readme)
matrix_init_remote_kb();

133
keyboards/nullbitsco/nibble/keymaps/via/nibble_encoder.c
View File

@ -1,133 +0,0 @@
/* Copyright 2020 Jay Greco
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "nibble_encoder.h"
uint8_t encoder_value = 0x20,
encoder_mode = ENC_MODE_VOLUME,
enabled_encoder_modes = 0x1F;
uint16_t retrieve_custom_encoder_config(uint8_t encoder_idx, uint8_t behavior) {
#ifdef DYNAMIC_KEYMAP_ENABLE
void* addr = (void*)(EEPROM_CUSTOM_ENCODER + (encoder_idx * 6) + (behavior * 2));
uint16_t keycode = eeprom_read_byte(addr) << 8;
keycode |= eeprom_read_byte(addr + 1);
return keycode;
#else
return 0;
#endif
}
void set_custom_encoder_config(uint8_t encoder_idx, uint8_t behavior, uint16_t new_code) {
#ifdef DYNAMIC_KEYMAP_ENABLE
void* addr = (void*)(EEPROM_CUSTOM_ENCODER + (encoder_idx * 6) + (behavior * 2));
eeprom_update_byte(addr, (uint8_t)(new_code >> 8));
eeprom_update_byte(addr + 1, (uint8_t)(new_code & 0xFF));
#endif
}
void pre_encoder_mode_change(void) {
dprintf("Changing encoder mode: %u\n", encoder_mode);
}
void post_encoder_mode_change(void) {
dprintf("Encoder mode: %u\n", encoder_mode);
}
//???
void change_encoder_mode(bool clockwise) {
pre_encoder_mode_change();
if(enabled_encoder_modes == 0){
enabled_encoder_modes = 0x1F;
}
do {
if(!clockwise){
if (encoder_mode == 0){
encoder_mode = _NUM_ENCODER_MODES - 1;
} else{
encoder_mode = encoder_mode - 1;
}
} else {
encoder_mode = (encoder_mode + 1) % _NUM_ENCODER_MODES;
}
} while(((1 << encoder_mode) & enabled_encoder_modes) == 0);
post_encoder_mode_change();
}
uint16_t handle_encoder_cw(void) {
dprintf("Encoder mode: %u\n", encoder_mode);
uint16_t mapped_code = 0;
switch(encoder_mode){
default:
break;
case ENC_MODE_VOLUME:
mapped_code = KC_VOLU;
break;
case ENC_MODE_MEDIA:
mapped_code = KC_MEDIA_NEXT_TRACK;
break;
case ENC_MODE_SCROLL:
mapped_code = KC_WH_D;
break;
case ENC_MODE_BACKLIGHT:
mapped_code = RGB_VAI;
break;
#ifdef DYNAMIC_KEYMAP_ENABLE
case ENC_MODE_CUSTOM0:
mapped_code = retrieve_custom_encoder_config(0, ENC_CUSTOM_CW);
break;
case ENC_MODE_CUSTOM1:
mapped_code = retrieve_custom_encoder_config(1, ENC_CUSTOM_CW);
break;
case ENC_MODE_CUSTOM2:
mapped_code = retrieve_custom_encoder_config(2, ENC_CUSTOM_CW);
break;
#endif
}
return mapped_code;
}
uint16_t handle_encoder_ccw(void) {
dprintf("Encoder mode: %u\n", encoder_mode);
uint16_t mapped_code = 0;
switch(encoder_mode){
default:
break;
case ENC_MODE_VOLUME:
mapped_code = KC_VOLD;
break;
case ENC_MODE_MEDIA:
mapped_code = KC_MEDIA_PREV_TRACK;
break;
case ENC_MODE_SCROLL:
mapped_code = KC_WH_U;
break;
case ENC_MODE_BACKLIGHT:
mapped_code = RGB_VAD;
break;
#ifdef DYNAMIC_KEYMAP_ENABLE
case ENC_MODE_CUSTOM0:
mapped_code = retrieve_custom_encoder_config(0, ENC_CUSTOM_CCW);
break;
case ENC_MODE_CUSTOM1:
mapped_code = retrieve_custom_encoder_config(1, ENC_CUSTOM_CCW);
break;
case ENC_MODE_CUSTOM2:
mapped_code = retrieve_custom_encoder_config(2, ENC_CUSTOM_CCW);
break;
#endif
}
return mapped_code;
}

50
keyboards/nullbitsco/nibble/keymaps/via/nibble_encoder.h
View File

@ -1,50 +0,0 @@
/* Copyright 2020 Jay Greco
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include QMK_KEYBOARD_H
#include "eeprom.h"
#define EEPROM_ENABLED_ENCODER_MODES (VIA_EEPROM_CUSTOM_CONFIG_ADDR)
#define EEPROM_CUSTOM_ENCODER (VIA_EEPROM_CUSTOM_CONFIG_ADDR+1)
enum encoder_modes {
ENC_MODE_VOLUME,
ENC_MODE_MEDIA,
ENC_MODE_SCROLL,
ENC_MODE_BRIGHTNESS,
ENC_MODE_BACKLIGHT,
ENC_MODE_CUSTOM0,
ENC_MODE_CUSTOM1,
ENC_MODE_CUSTOM2,
_NUM_ENCODER_MODES,
};
enum custom_encoder_behavior {
ENC_CUSTOM_CW = 0,
ENC_CUSTOM_CCW,
ENC_CUSTOM_PRESS
};
uint16_t
retrieve_custom_encoder_config(uint8_t encoder_idx, uint8_t behavior),
handle_encoder_cw(void),
handle_encoder_ccw(void);
void set_custom_encoder_config(uint8_t encoder_idx, uint8_t behavior, uint16_t new_code),
pre_encoder_mode_change(void),
post_encoder_mode_change(void),
change_encoder_mode(bool clockwise);

3
keyboards/nullbitsco/nibble/keymaps/via/rules.mk
View File

@ -1,4 +1 @@
VIA_ENABLE = yes
SRC += keymaps/via/nibble_encoder.c
SRC += keymaps/via/via_extras.c

129
keyboards/nullbitsco/nibble/keymaps/via/via_extras.c
View File

@ -1,129 +0,0 @@
/* Copyright 2020 Jay Greco
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "via_extras.h"
// Encoder Behavior
extern uint8_t encoder_value;
extern uint8_t encoder_mode;
extern uint8_t enabled_encoder_modes;
void raw_hid_receive_kb( uint8_t *data, uint8_t length )
{
uint8_t *command_id = &(data[0]);
uint8_t *command_data = &(data[1]);
dprintf("raw hid recv! command_id: %u\n",*command_id);
switch ( *command_id )
{
case id_get_keyboard_value:
{
switch( command_data[0])
{
case id_encoder_modes:
{
command_data[1] = enabled_encoder_modes;
dprintf("[read] enabled_encoder_modes: %u\n", enabled_encoder_modes);
}
break;
case id_encoder_custom:
{
uint8_t custom_encoder_idx = command_data[1];
uint16_t keycode = retrieve_custom_encoder_config(custom_encoder_idx, ENC_CUSTOM_CW);
command_data[2] = keycode >> 8;
command_data[3] = keycode & 0xFF;
keycode = retrieve_custom_encoder_config(custom_encoder_idx, ENC_CUSTOM_CCW);
command_data[4] = keycode >> 8;
command_data[5] = keycode & 0xFF;
keycode = retrieve_custom_encoder_config(custom_encoder_idx, ENC_CUSTOM_PRESS);
command_data[6] = keycode >> 8;
command_data[7] = keycode & 0xFF;
}
break;
default:
{
*command_id = id_unhandled;
}
break;
}
}
break;
case id_set_keyboard_value:
{
switch(command_data[0]){
case id_encoder_modes:
{
enabled_encoder_modes = command_data[1];
dprintf("[write] enabled_encoder_modes: %u\n", enabled_encoder_modes);
eeprom_update_byte((uint8_t*)EEPROM_ENABLED_ENCODER_MODES, enabled_encoder_modes);
}
break;
case id_encoder_custom:
{
uint8_t custom_encoder_idx = command_data[1];
uint8_t encoder_behavior = command_data[2];
uint16_t keycode = (command_data[3] << 8) | command_data[4];
set_custom_encoder_config(custom_encoder_idx, encoder_behavior, keycode);
}
break;
default:
{
*command_id = id_unhandled;
}
break;
}
}
break;
default:
{
// Unhandled message.
*command_id = id_unhandled;
}
break;
}
}
void encoder_update_kb(uint8_t index, bool clockwise) {
if (layer_state_is(1)) {
change_encoder_mode(clockwise);
return;
}
uint16_t mapped_code = 0;
if (clockwise) {
mapped_code = handle_encoder_cw();
} else {
mapped_code = handle_encoder_ccw();
}
if(mapped_code != 0){
tap_code16(mapped_code);
}
}
void custom_config_load(void){
#ifdef DYNAMIC_KEYMAP_ENABLE
enabled_encoder_modes = eeprom_read_byte((uint8_t*)EEPROM_ENABLED_ENCODER_MODES);
#endif
}
void via_init_kb(void)
{
dprintf("VIA is enabled.\n");
custom_config_load();
}

39
keyboards/nullbitsco/nibble/keymaps/via/via_extras.h
View File

@ -1,39 +0,0 @@
/* Copyright 2020 Jay Greco
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "nibble_encoder.h"
#include "via.h"
#include "raw_hid.h"
#include "dynamic_keymap.h"
#include "tmk_core/common/eeprom.h"
enum nibble_keyboard_value_id {
id_encoder_modes = 0x80,
id_unused_mode_1,
id_encoder_custom,
id_unused_mode_2
};
// Encoder Behavior
extern uint8_t encoder_value,
encoder_mode,
enabled_encoder_modes;
void raw_hid_receive_kb(uint8_t *data, uint8_t length),
encoder_update_kb(uint8_t index, bool clockwise),
custom_config_load(void),
via_init_kb(void);