[Keyboard] Fix formatting on keyboard to micro connection table (#5968)

* Fix formatting on keyboard to micro connection table

* Add whitespace to make more readable
This commit is contained in:
Mark 2019-05-25 00:18:57 +03:00 committed by Drashna Jaelre
parent a1e2d51712
commit 4f1537b879

View File

@ -23,9 +23,10 @@ qmk because the Arduino softserial library uses different pins from QMK.
I've wired the pro micro hardware as follows. I've wired the pro micro hardware as follows.
Label| TX0,RX1,GND,GND,2 ,3 ,4 ,5 ,6 ,7 | Label | TX0 | RX1 | GND | GND | 2 | 3 | 4 | 5 | 6 | 7 |
Palm | , , * ,GND,VCC,RX ,NC ,RTS,nc ,DCD | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- | --- |
MCU | ,D1 ,D0 , ,C6 , ,E6 | Palm | | | * | GND | VCC | RX | NC | RTS | NC | DCD |
| MCU | | | | | D1 | D0 | | C6 | | E6 |
\* The RX line from the keyboard should be conected to a ~10K ohm pull down resistor to ground. \* The RX line from the keyboard should be conected to a ~10K ohm pull down resistor to ground.
RX --|--3 RX --|--3