Updated readme to show compile rules that won't throw an error
This commit is contained in:
parent
f2824bca02
commit
9334986bd9
@ -1,126 +1,134 @@
|
|||||||
DeltaSplit75
|
DeltaSplit75
|
||||||
======
|
======
|
||||||
|
|
||||||
This readme and most of the code are from https://github.com/ahtn/tmk_keyboard/ and https://github.com/qmk/qmk_firmware/tree/master/keyboards/lets_split
|
This readme and most of the code are from https://github.com/ahtn/tmk_keyboard/ and https://github.com/qmk/qmk_firmware/tree/master/keyboards/lets_split
|
||||||
|
|
||||||
Credit to ahtn and wootpatoot for work on the split keyboard firmware
|
Credit to ahtn and wootpatoot for work on the split keyboard firmware
|
||||||
|
|
||||||
Split keyboard firmware for Arduino Pro Micro or other ATmega32u4
|
Split keyboard firmware for Arduino Pro Micro or other ATmega32u4
|
||||||
based boards.
|
based boards.
|
||||||
|
|
||||||
## Case Files
|
## Case Files
|
||||||
Files are available here: https://github.com/xyxjj/DeltaSplit75-Case-files
|
Files are available here: https://github.com/xyxjj/DeltaSplit75-Case-files
|
||||||
|
|
||||||
|
|
||||||
## First Time Setup
|
## First Time Setup
|
||||||
|
|
||||||
Download or clone the whole firmware and navigate to the keyboards/DeltaSplit75 directory. Once your dev env is setup, you'll be able to generate the default .hex using:
|
Download or clone the whole firmware and navigate to the keyboards/deltasplit75 directory. Once your dev env is setup, you'll be able to generate the default .hex using:
|
||||||
|
|
||||||
```
|
```
|
||||||
make v2
|
make v2-default
|
||||||
|
|
||||||
or
|
or
|
||||||
|
|
||||||
make protosplit-protosplit (if you have one of the prototype PCBs)
|
make v2-YOUR_KEYMAP_NAME
|
||||||
```
|
|
||||||
|
or
|
||||||
You will see a lot of output and if everything worked correctly you will see the built hex files:
|
|
||||||
|
make protosplit-protosplit (if you have one of the prototype PCBs)
|
||||||
```
|
```
|
||||||
deltasplit75_protosplit_protosplit.hex
|
|
||||||
|
You will see a lot of output and if everything worked correctly you will see the built hex files:
|
||||||
or
|
|
||||||
|
```
|
||||||
deltasplit75_v2_default.hex
|
deltasplit75_protosplit_protosplit.hex
|
||||||
|
|
||||||
```
|
or
|
||||||
|
|
||||||
|
deltasplit74_v2_YOUR_KEYMAP_NAME.hex
|
||||||
For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/readme.md##customizing-your-keymap) in the main readme.md.
|
|
||||||
|
or
|
||||||
### DeltaSplit75 V2
|
|
||||||
The PCBs available in groupbuy are all v2, if you've bought one of my prototype PCBs (it says DeltaSplit65 on the silkscreen instead of 75), use the code make ProtoSplit-ProtoSplit instead
|
deltasplit75_v2_default.hex
|
||||||
|
|
||||||
Features
|
```
|
||||||
--------
|
|
||||||
|
|
||||||
For the full Quantum Mechanical Keyboard feature list, see [the parent readme.md](/readme.md).
|
For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/readme.md##customizing-your-keymap) in the main readme.md.
|
||||||
|
|
||||||
Some features supported by the firmware:
|
### DeltaSplit75 V2
|
||||||
|
The PCBs available in groupbuy are all v2, if you've bought one of my prototype PCBs (it says DeltaSplit65 on the silkscreen instead of 75), use the code make ProtoSplit-ProtoSplit instead
|
||||||
* Either half can connect to the computer via USB, or both halves can be used
|
|
||||||
independently.
|
Features
|
||||||
* 75% formfactor
|
--------
|
||||||
* Support for multiple Bottom Rows
|
|
||||||
* RGB underglow support
|
For the full Quantum Mechanical Keyboard feature list, see [the parent readme.md](/readme.md).
|
||||||
* Split Backspace and ISO support
|
|
||||||
|
Some features supported by the firmware:
|
||||||
|
|
||||||
Flashing
|
* Either half can connect to the computer via USB, or both halves can be used
|
||||||
-------
|
independently.
|
||||||
I personally use xLoader to upload my hex files to the keyboard, though any other working software is fine too
|
* 75% formfactor
|
||||||
|
* Support for multiple Bottom Rows
|
||||||
|
* RGB underglow support
|
||||||
Choosing which board to plug the USB cable into (choosing Master)
|
* Split Backspace and ISO support
|
||||||
--------
|
|
||||||
Because the two boards are identical, the firmware has logic to differentiate the left and right board.
|
|
||||||
|
Flashing
|
||||||
It uses two strategies to figure things out: look at the EEPROM (memory on the chip) or looks if the current board has the usb cable.
|
-------
|
||||||
|
I personally use xLoader to upload my hex files to the keyboard, though any other working software is fine too
|
||||||
The EEPROM approach requires additional setup (flashing the eeeprom) but allows you to swap the usb cable to either side.
|
|
||||||
|
|
||||||
The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra.
|
Choosing which board to plug the USB cable into (choosing Master)
|
||||||
|
--------
|
||||||
### Setting the left hand as master
|
Because the two boards are identical, the firmware has logic to differentiate the left and right board.
|
||||||
If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set.
|
|
||||||
|
It uses two strategies to figure things out: look at the EEPROM (memory on the chip) or looks if the current board has the usb cable.
|
||||||
### Setting the right hand as master
|
|
||||||
If you always plug the usb cable into the right board, add an extra flag to your `config.h`
|
The EEPROM approach requires additional setup (flashing the eeeprom) but allows you to swap the usb cable to either side.
|
||||||
```
|
|
||||||
#define MASTER_RIGHT
|
The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra.
|
||||||
```
|
|
||||||
|
### Setting the left hand as master
|
||||||
### Setting EE_hands to use either hands as master
|
If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set.
|
||||||
If you define `EE_HANDS` in your `config.h`, you will need to set the
|
|
||||||
EEPROM for the left and right halves.
|
### Setting the right hand as master
|
||||||
|
If you always plug the usb cable into the right board, add an extra flag to your `config.h`
|
||||||
The EEPROM is used to store whether the
|
```
|
||||||
half is left handed or right handed. This makes it so that the same firmware
|
#define MASTER_RIGHT
|
||||||
file will run on both hands instead of having to flash left and right handed
|
```
|
||||||
versions of the firmware to each half. To flash the EEPROM file for the left
|
|
||||||
half run:
|
### Setting EE_hands to use either hands as master
|
||||||
```
|
If you define `EE_HANDS` in your `config.h`, you will need to set the
|
||||||
avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep
|
EEPROM for the left and right halves.
|
||||||
// or the equivalent in dfu-programmer
|
|
||||||
|
The EEPROM is used to store whether the
|
||||||
```
|
half is left handed or right handed. This makes it so that the same firmware
|
||||||
and similarly for right half
|
file will run on both hands instead of having to flash left and right handed
|
||||||
```
|
versions of the firmware to each half. To flash the EEPROM file for the left
|
||||||
avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep
|
half run:
|
||||||
// or the equivalent in dfu-programmer
|
```
|
||||||
```
|
avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-lefthand.eep
|
||||||
|
// or the equivalent in dfu-programmer
|
||||||
NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`)
|
|
||||||
|
```
|
||||||
After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash.
|
and similarly for right half
|
||||||
|
```
|
||||||
Note that you need to program both halves, but you have the option of using
|
avrdude -p atmega32u4 -P $(COM_PORT) -c avr109 -U eeprom:w:eeprom-righhand.eep
|
||||||
different keymaps for each half. You could program the left half with a QWERTY
|
// or the equivalent in dfu-programmer
|
||||||
layout and the right half with a Colemak layout using bootmagic's default layout option.
|
```
|
||||||
Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the
|
|
||||||
right half is connected.
|
NOTE: replace `$(COM_PORT)` with the port of your device (e.g. `/dev/ttyACM0`)
|
||||||
|
|
||||||
|
After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash.
|
||||||
Notes on Using Pro Micro 3.3V
|
|
||||||
-----------------------------
|
Note that you need to program both halves, but you have the option of using
|
||||||
|
different keymaps for each half. You could program the left half with a QWERTY
|
||||||
Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects
|
layout and the right half with a Colemak layout using bootmagic's default layout option.
|
||||||
the frequency on the 3.3V board.
|
Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the
|
||||||
|
right half is connected.
|
||||||
Also, if the slave board is producing weird characters in certain columns,
|
|
||||||
update the following line in `matrix.c` to the following:
|
|
||||||
|
Notes on Using Pro Micro 3.3V
|
||||||
```
|
-----------------------------
|
||||||
// _delay_us(30); // without this wait read unstable value.
|
|
||||||
_delay_us(300); // without this wait read unstable value.
|
Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects
|
||||||
```
|
the frequency on the 3.3V board.
|
||||||
|
|
||||||
|
Also, if the slave board is producing weird characters in certain columns,
|
||||||
|
update the following line in `matrix.c` to the following:
|
||||||
|
|
||||||
|
```
|
||||||
|
// _delay_us(30); // without this wait read unstable value.
|
||||||
|
_delay_us(300); // without this wait read unstable value.
|
||||||
|
```
|
||||||
|
Loading…
Reference in New Issue
Block a user