[Keyboard] adds new revision: dztech/dz60rgb/v2_1 (#13636)
This commit is contained in:
Tran Kim Tung
GitHub
parent
58abdfc834
commit
95a7c22824
@ -8,14 +8,17 @@ A hotswap 60% RGB keyboard.
|
||||
* Hardware Supported: DZtech DZ60RGB V1 and V2
|
||||
* Hardware Availability: [KBDfans](https://kbdfans.com/)
|
||||
|
||||
There are two versions of the DZ60RGB. Please use the appropriate firmware for your board.
|
||||
There are three versions of the DZ60RGB. Please use the appropriate firmware for your board.
|
||||
|
||||
* V1: STM32F303 (Arm), takes .bin files
|
||||
* V2: ATmega32U4 (AVR), takes .hex files
|
||||
* V2.1: ATmega32U4 (AVR), takes .bin files [Flash Manual](https://docs.google.com/document/d/111qx6Qec4JqtIhWaZlMND-VuRnFtn9a-gJaHN8fsL7M/edit?usp=sharing)
|
||||
Started shipping in June 2021 as a slightly modified version of v2.
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make dztech/dz60rgb/v1:default # Arm (STM32F303)
|
||||
make dztech/dz60rgb/v2:default # AVR (ATmega32U4)
|
||||
make dztech/dz60rgb/v2_1:default # AVR (ATmega32U4)
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
|
||||
79
keyboards/dztech/dz60rgb/v2_1/config.h
Normal file
79
keyboards/dztech/dz60rgb/v2_1/config.h
Normal file
@ -0,0 +1,79 @@
|
||||
/* Copyright 2021 trankimtung
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x445A
|
||||
#define PRODUCT_ID 0x1121
|
||||
#define DEVICE_VER 0x0003
|
||||
#define MANUFACTURER DZTECH
|
||||
#define PRODUCT DZ60RGB
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 14
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { F5, F4, F1, B3, B2 }
|
||||
#define MATRIX_COL_PINS { C7, F7, F6, F0, B0, B1, B4, D7, D6, D4, D5, D3, D2, B7 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 3
|
||||
|
||||
/* disable these deprecated features by default */
|
||||
#define NO_ACTION_MACRO
|
||||
#define NO_ACTION_FUNCTION
|
||||
|
||||
#ifdef RGB_MATRIX_ENABLE
|
||||
# define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects
|
||||
# define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended
|
||||
# define RGB_MATRIX_KEYPRESSES
|
||||
# define RGB_MATRIX_FRAMEBUFFER_EFFECTS
|
||||
# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN
|
||||
# define DISABLE_RGB_MATRIX_BAND_SAT
|
||||
# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
|
||||
# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT
|
||||
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
|
||||
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
|
||||
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
|
||||
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
|
||||
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
|
||||
# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
|
||||
# define DISABLE_RGB_MATRIX_SPLASH
|
||||
# define DISABLE_RGB_MATRIX_MULTISPLASH
|
||||
# define DISABLE_RGB_MATRIX_SOLID_SPLASH
|
||||
# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
|
||||
# define DISABLE_RGB_MATRIX_DIGITAL_RAIN
|
||||
# define DRIVER_ADDR_1 0b1010000
|
||||
# define DRIVER_ADDR_2 0b1010000 // this is here for compliancy reasons.
|
||||
# define DRIVER_COUNT 2
|
||||
# define DRIVER_1_LED_TOTAL 63
|
||||
# define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL
|
||||
#endif
|
||||
26
keyboards/dztech/dz60rgb/v2_1/rules.mk
Normal file
26
keyboards/dztech/dz60rgb/v2_1/rules.mk
Normal file
@ -0,0 +1,26 @@
|
||||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = lufa-ms
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth
|
||||
AUDIO_ENABLE = no # Audio output
|
||||
RGB_MATRIX_ENABLE = yes # Use RGB matrix
|
||||
RGB_MATRIX_DRIVER = IS31FL3733
|
||||
NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in
|
||||
LTO_ENABLE = yes
|
||||
Loading…
Reference in New Issue
Block a user