Update lock led processing and remove debug msgs

This commit is contained in:
jpetermans 2017-05-30 21:52:44 -07:00
parent ac97870801
commit 9af272e4bb
4 changed files with 10 additions and 28 deletions

View File

@ -247,7 +247,6 @@ bool process_record_user (uint16_t keycode, keyrecord_t *record) {
// Runs just one time when the keyboard initializes. // Runs just one time when the keyboard initializes.
void matrix_init_user(void) { void matrix_init_user(void) {
xprintf("init start");
led_controller_init(); led_controller_init();

View File

@ -135,7 +135,6 @@ msg_t is31_read_register(uint8_t page, uint8_t reg, uint8_t *result) {
* initialise the IS31 chip * initialise the IS31 chip
* ======================== */ * ======================== */
void is31_init(void) { void is31_init(void) {
xprintf("_is31_init\n");
// just to be sure that it's all zeroes // just to be sure that it's all zeroes
__builtin_memset(full_page,0,0xB4+1); __builtin_memset(full_page,0,0xB4+1);
// zero function page, all registers (assuming full_page is all zeroes) // zero function page, all registers (assuming full_page is all zeroes)
@ -200,41 +199,33 @@ static THD_FUNCTION(LEDthread, arg) {
msg_args[1] = (msg >> 16) & 0XFF; msg_args[1] = (msg >> 16) & 0XFF;
msg_args[2] = (msg >> 24) & 0xFF; msg_args[2] = (msg >> 24) & 0xFF;
xprintf("msg_type: %d-%d-%d\n", msg_type, msg_args[0], msg_args[1]);
switch (msg_type){ switch (msg_type){
case SET_FULL_ROW: case SET_FULL_ROW:
xprintf("FULL ROW: %d-%d\n", msg_args[0], msg_args[1]);
//write full byte to pin address, msg_args[1] = pin #, msg_args[0] = 8 bits to write //write full byte to pin address, msg_args[1] = pin #, msg_args[0] = 8 bits to write
//writes only to currently displayed page //writes only to currently displayed page
write_led_byte(page_status, msg_args[1], msg_args[0]); write_led_byte(page_status, msg_args[1], msg_args[0]);
break; break;
case OFF_LED: case OFF_LED:
xprintf("OFF: %d-%d\n", msg_args[0], msg_args[1]);
//on/off/toggle single led, msg_args[0] = row/col of led, msg_args[1] = page //on/off/toggle single led, msg_args[0] = row/col of led, msg_args[1] = page
set_led_bit(msg_args[1], control_register_word, msg_args[0], 0); set_led_bit(msg_args[1], control_register_word, msg_args[0], 0);
break; break;
case ON_LED: case ON_LED:
xprintf("ON: %d-%d\n", msg_args[0], msg_args[1]);
set_led_bit(msg_args[1], control_register_word, msg_args[0], 1); set_led_bit(msg_args[1], control_register_word, msg_args[0], 1);
break; break;
case TOGGLE_LED: case TOGGLE_LED:
xprintf("TOGGLE: %d-%d\n", msg_args[0], msg_args[1]);
set_led_bit(msg_args[1], control_register_word, msg_args[0], 2); set_led_bit(msg_args[1], control_register_word, msg_args[0], 2);
break; break;
case BLINK_OFF_LED: case BLINK_OFF_LED:
xprintf("B_on: %d-%d\n", msg_args[0], msg_args[1]);
//on/off/toggle single led, msg_args[0] = row/col of led //on/off/toggle single led, msg_args[0] = row/col of led
set_led_bit(msg_args[1], control_register_word, msg_args[0], 4); set_led_bit(msg_args[1], control_register_word, msg_args[0], 4);
break; break;
case BLINK_ON_LED: case BLINK_ON_LED:
xprintf("B_off: %d-%d\n", msg_args[0], msg_args[1]);
set_led_bit(msg_args[1], control_register_word, msg_args[0], 5); set_led_bit(msg_args[1], control_register_word, msg_args[0], 5);
break; break;
case BLINK_TOGGLE_LED: case BLINK_TOGGLE_LED:
xprintf("B_togg: %d-%d\n", msg_args[0], msg_args[1]);
set_led_bit(msg_args[1], control_register_word, msg_args[0], 6); set_led_bit(msg_args[1], control_register_word, msg_args[0], 6);
break; break;
@ -244,12 +235,10 @@ static THD_FUNCTION(LEDthread, arg) {
chThdSleepMilliseconds(5); chThdSleepMilliseconds(5);
is31_read_register(0, 0x00, &temp); is31_read_register(0, 0x00, &temp);
is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
xprintf("TOGGLE_ALL: %d-%d\n", msg_args[0], msg_args[1]);
xprintf("temp: %d\n", temp);
led_control_reg[0] = 0; led_control_reg[0] = 0;
//if first leds are already on, toggle frame 0 off //toggle led mask based on current state (temp)
if (temp==0 || page_status > 0) { if (temp==0 || page_status > 0) {
__builtin_memcpy(led_control_reg+1, all_on_leds_mask, 0x12); __builtin_memcpy(led_control_reg+1, all_on_leds_mask, 0x12);
} else { } else {
@ -262,13 +251,14 @@ static THD_FUNCTION(LEDthread, arg) {
page_status=0; page_status=0;
//maintain lock leds //maintain lock leds, reset to off and force recheck to blink of all leds toggled on
numlock_status = 0;
capslock_status = 0;
led_set(host_keyboard_leds()); led_set(host_keyboard_leds());
} }
break; break;
case TOGGLE_BACKLIGHT: case TOGGLE_BACKLIGHT:
xprintf("TOGGLE_BKLT: %d-%d\n", msg_args[0], msg_args[1]);
//msg_args[0] = on/off //msg_args[0] = on/off
//populate 9 byte rows to be written to each pin, first byte is register (pin) address //populate 9 byte rows to be written to each pin, first byte is register (pin) address
@ -287,12 +277,13 @@ static THD_FUNCTION(LEDthread, arg) {
case DISPLAY_PAGE: case DISPLAY_PAGE:
//msg_args[0] = page to toggle on //msg_args[0] = page to toggle on
xprintf("DSPY_PG: %d-%d\n", msg_args[0], msg_args[1]);
if (page_status != msg_args[0]) { if (page_status != msg_args[0]) {
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, msg_args[0]); is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, msg_args[0]);
page_status = msg_args[0]; page_status = msg_args[0];
//maintain lock leds //maintain lock leds, reset to off and force recheck for new page
numlock_status = 0;
capslock_status = 0;
led_set(host_keyboard_leds()); led_set(host_keyboard_leds());
} }
break; break;
@ -309,7 +300,6 @@ static THD_FUNCTION(LEDthread, arg) {
break; break;
case TOGGLE_NUM_LOCK: case TOGGLE_NUM_LOCK:
xprintf("NMLK: %d-%d\n", msg_args[0], msg_args[1]);
//msg_args[0] = 0 or 1, off/on //msg_args[0] = 0 or 1, off/on
if (numlock_status != msg_args[0]) { if (numlock_status != msg_args[0]) {
set_lock_leds(NUM_LOCK_LED_ADDRESS, msg_args[0], page_status); set_lock_leds(NUM_LOCK_LED_ADDRESS, msg_args[0], page_status);
@ -317,7 +307,6 @@ static THD_FUNCTION(LEDthread, arg) {
} }
break; break;
case TOGGLE_CAPS_LOCK: case TOGGLE_CAPS_LOCK:
xprintf("CPLK: %d-%d\n", msg_args[0], msg_args[1]);
//msg_args[0] = 0 or 1, off/on //msg_args[0] = 0 or 1, off/on
if (capslock_status != msg_args[0]) { if (capslock_status != msg_args[0]) {
set_lock_leds(CAPS_LOCK_LED_ADDRESS, msg_args[0], page_status); set_lock_leds(CAPS_LOCK_LED_ADDRESS, msg_args[0], page_status);
@ -326,7 +315,6 @@ static THD_FUNCTION(LEDthread, arg) {
break; break;
case STEP_BRIGHTNESS: case STEP_BRIGHTNESS:
xprintf("Step: %d-%d\n", msg_args[0], msg_args[1]);
//led_args[0] = step up (1) or down (0) //led_args[0] = step up (1) or down (0)
switch (msg_args[0]) { switch (msg_args[0]) {
case 0: case 0:
@ -373,7 +361,6 @@ void set_led_bit (uint8_t page, uint8_t *led_control_word, uint8_t led_addr, uin
if (led_addr < 0 || led_addr > 87 || led_addr % 10 > 8) { if (led_addr < 0 || led_addr > 87 || led_addr % 10 > 8) {
return; return;
} }
xprintf("_set action-led: %x-%d\n", action, led_addr);
blink_bit = action>>2;//check for blink bit blink_bit = action>>2;//check for blink bit
action &= ~(1<<2); //strip blink bit action &= ~(1<<2); //strip blink bit
@ -381,17 +368,14 @@ void set_led_bit (uint8_t page, uint8_t *led_control_word, uint8_t led_addr, uin
//led_addr tens column is pin#, ones column is bit position in 8-bit mask //led_addr tens column is pin#, ones column is bit position in 8-bit mask
control_reg_addr = ((led_addr / 10) % 10 - 1 ) * 0x02;// A-matrix is every other byte control_reg_addr = ((led_addr / 10) % 10 - 1 ) * 0x02;// A-matrix is every other byte
control_reg_addr += blink_bit == 1 ? 0x12 : 0x00;//if blink_bit, shift 12 bytes to blink register control_reg_addr += blink_bit == 1 ? 0x12 : 0x00;//if blink_bit, shift 12 bytes to blink register
xprintf("_set control address: %x\n", control_reg_addr);
is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON); is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON);
chThdSleepMilliseconds(5); chThdSleepMilliseconds(5);
is31_read_register(page, control_reg_addr, &temp);//maintain status of leds on this byte is31_read_register(page, control_reg_addr, &temp);//maintain status of leds on this byte
is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); is31_write_register(IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF);
xprintf("_set temp_byte_mask: %x\n", temp);
column_bit = 1<<(led_addr % 10 - 1); column_bit = 1<<(led_addr % 10 - 1);
column_byte = temp; column_byte = temp;
xprintf("_set col_byte_mask: %x\n", column_byte);
switch(action) { switch(action) {
case 0: case 0:
@ -451,7 +435,6 @@ void set_lock_leds(uint8_t led_addr, uint8_t led_action, uint8_t page) {
led_action |= (1<<2); //set blink bit led_action |= (1<<2); //set blink bit
} }
} }
xprintf("_lock action: %d\n", led_action);
set_led_bit(page,led_control_word,led_addr,led_action); set_led_bit(page,led_control_word,led_addr,led_action);
} }
@ -462,7 +445,6 @@ void set_lock_leds(uint8_t led_addr, uint8_t led_action, uint8_t page) {
void led_controller_init(void) { void led_controller_init(void) {
uint8_t i; uint8_t i;
xprintf("led_init\n");
/* initialise I2C */ /* initialise I2C */
/* I2C pins */ /* I2C pins */
palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL

View File

@ -75,7 +75,8 @@ void led_controller_init(void);
// D2:D0 extinguish time (3.5ms*2^i) // D2:D0 extinguish time (3.5ms*2^i)
#define IS31_REG_SHUTDOWN 0x0A #define IS31_REG_SHUTDOWN 0x0A
#define IS31_REG_SHUTDOWN_ON 0x1 #define IS31_REG_SHUTDOWN_OFF 0x1
#define IS31_REG_SHUTDOWN_ON 0x0
#define IS31_REG_AGCCTRL 0x0B #define IS31_REG_AGCCTRL 0x0B
#define IS31_REG_ADCRATE 0x0C #define IS31_REG_ADCRATE 0x0C

View File

@ -56,7 +56,7 @@ OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
# Build Options # Build Options
# comment out to disable the options. # comment out to disable the options.
# #
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration
## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) ## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
MOUSEKEY_ENABLE ?= yes # Mouse keys MOUSEKEY_ENABLE ?= yes # Mouse keys
EXTRAKEY_ENABLE ?= yes # Audio control and System control EXTRAKEY_ENABLE ?= yes # Audio control and System control