Merge remote-tracking branch 'origin/master' into develop
This commit is contained in:
commit
9e7bfdf6c6
@ -21,3 +21,17 @@ To reset the board into bootloader mode, do one of the following:
|
|||||||
* Fn+Backslash will reset the board to bootloader mode if you have flashed the default QMK keymap
|
* Fn+Backslash will reset the board to bootloader mode if you have flashed the default QMK keymap
|
||||||
|
|
||||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||||
|
|
||||||
|
## Case Screw Replacements
|
||||||
|
|
||||||
|
Many users report stripped case screws when disassembling the board.
|
||||||
|
|
||||||
|
The stock case screws are:
|
||||||
|
* Thread: M2
|
||||||
|
* Thread length: ~5 mm
|
||||||
|
* Head diameter: ~3.8 mm
|
||||||
|
* Head counterbore diameter: ~4.0 mm
|
||||||
|
* Head counterbore depth: ~1.9 mm
|
||||||
|
|
||||||
|
Most M2x5mm screws should fit fine, although it's best to ensure that the screw head will fit inside the counterbore.
|
||||||
|
For reference, [this hex socket head screw](https://www.mcmaster.com/91292A005/) from McMaster-Carr should fit nearly flush (head will protrude above the counterbore by ~0.1 mm).
|
||||||
|
Loading…
Reference in New Issue
Block a user