Updates bootloader settings, adds file size check (#2029)

* pull fuse settings for bootloader jump

* fix 32a chips

* make automatic bootloader selection optional

* quantify bootloaders

* fixs #164, speeds up dfu reset

* fix for chips w/o usb

* missing an n

* fix bootloader sizes, use words for addresses

* fix bmini, pearl, and [[ issue, make things quiet

* ignore avr errors on arm for now

* update settings for the light

* document bootloader stuff

* add bootloader title

keyboards/mt40/config.h

@@ -44,7 +44,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_VAL_STEP 18
 
 #define NO_UART 1
-#define BOOTLOADHID_BOOTLOADER 1
 
 #define TAPPING_TERM 200
 

keyboards/mt40/program

@@ -1,74 +0,0 @@
-#!/usr/bin/env python2.7
-# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-from __future__ import print_function
-
-import os
-import sys
-import time
-import usb
-
-if len(sys.argv) < 2:
-    print('Usage: %s <firmware.hex>' % sys.argv[0])
-    sys.exit(1)
-
-print('Searching for planck clone keyboard... ', end='')
-
-dev = usb.core.find(idVendor=0x20A0, idProduct=0x422D)
-if dev is None:
-    raise ValueError('Device not found')
-
-print('Found', end='\n\n')
-
-print('Device Information:')
-print('  idVendor: %d (0x%04x)' % (dev.idVendor, dev.idVendor))
-print('  idProduct: %d (0x%04x)' % (dev.idProduct, dev.idProduct))
-print('Manufacturer: %s' % (dev.iManufacturer))
-print('Serial: %s' % (dev.iSerialNumber))
-print('Product: %s' % (dev.iProduct), end='\n\n')
-
-print('Transferring control to bootloader... ', end='')
-
-dev.set_configuration()
-
-request_type = usb.util.build_request_type(
-        usb.util.CTRL_OUT,
-        usb.util.CTRL_TYPE_CLASS,
-        usb.util.CTRL_RECIPIENT_DEVICE)
-
-USBRQ_HID_SET_REPORT = 0x09
-HID_REPORT_OPTION = 0x0301
-
-
-try:
-    dev.ctrl_transfer(
-            request_type,
-            USBRQ_HID_SET_REPORT,
-            HID_REPORT_OPTION,
-            0,
-            [0, 0, 0xFF] + [0] * 5
-            )
-except usb.core.USBError:
-    # for some reason I keep getting USBError, but it works!
-    pass
-
-# wait a bit until bootloader starts up
-time.sleep(2)
-
-print('OK')
-print('Programming...')
-if os.system('bootloadHID -r "%s"' % sys.argv[1]) == 0:
-    print('\nDone!')

keyboards/mt40/rules.mk

@@ -9,6 +9,12 @@ NO_SUSPEND_POWER_DOWN = yes
 # processor frequency
 F_CPU = 12000000
 
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = bootloadHID
+
 # build options
 BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE ?= no   # Mouse keys(+4700)
@@ -26,11 +32,10 @@ RGBLIGHT_CUSTOM_DRIVER = yes
 TAP_DANCE_ENABLE = no
 
 OPT_DEFS = -DDEBUG_LEVEL=0
-OPT_DEFS += -DBOOTLOADER_SIZE=2048
 
 # custom matrix setup
 CUSTOM_MATRIX = yes
 SRC = matrix.c i2c.c
 
 # programming options
-PROGRAM_CMD = ./keyboards/mt40/program $(TARGET).hex
+PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex