Keyboard: Add Nyquist Rev 3 (#4287)
* Add Nyquist Rev 3 * Switch to split_common
This commit is contained in:
Danny
Drashna Jaelre
parent
a95fc388fd
commit
a49d0a1e83
Binary file not shown.
Binary file not shown.
@ -1,162 +0,0 @@
|
|||||||
#include <util/twi.h>
|
|
||||||
#include <avr/io.h>
|
|
||||||
#include <stdlib.h>
|
|
||||||
#include <avr/interrupt.h>
|
|
||||||
#include <util/twi.h>
|
|
||||||
#include <stdbool.h>
|
|
||||||
#include "i2c.h"
|
|
||||||
|
|
||||||
#ifdef USE_I2C
|
|
||||||
|
|
||||||
// Limits the amount of we wait for any one i2c transaction.
|
|
||||||
// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
|
|
||||||
// 9 bits, a single transaction will take around 90μs to complete.
|
|
||||||
//
|
|
||||||
// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit
|
|
||||||
// poll loop takes at least 8 clock cycles to execute
|
|
||||||
#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
|
|
||||||
|
|
||||||
#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
|
|
||||||
|
|
||||||
volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
|
|
||||||
|
|
||||||
static volatile uint8_t slave_buffer_pos;
|
|
||||||
static volatile bool slave_has_register_set = false;
|
|
||||||
|
|
||||||
// Wait for an i2c operation to finish
|
|
||||||
inline static
|
|
||||||
void i2c_delay(void) {
|
|
||||||
uint16_t lim = 0;
|
|
||||||
while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
|
|
||||||
lim++;
|
|
||||||
|
|
||||||
// easier way, but will wait slightly longer
|
|
||||||
// _delay_us(100);
|
|
||||||
}
|
|
||||||
|
|
||||||
// Setup twi to run at 100kHz
|
|
||||||
void i2c_master_init(void) {
|
|
||||||
// no prescaler
|
|
||||||
TWSR = 0;
|
|
||||||
// Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
|
|
||||||
// Check datasheets for more info.
|
|
||||||
TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
|
|
||||||
}
|
|
||||||
|
|
||||||
// Start a transaction with the given i2c slave address. The direction of the
|
|
||||||
// transfer is set with I2C_READ and I2C_WRITE.
|
|
||||||
// returns: 0 => success
|
|
||||||
// 1 => error
|
|
||||||
uint8_t i2c_master_start(uint8_t address) {
|
|
||||||
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
|
|
||||||
|
|
||||||
i2c_delay();
|
|
||||||
|
|
||||||
// check that we started successfully
|
|
||||||
if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
|
|
||||||
return 1;
|
|
||||||
|
|
||||||
TWDR = address;
|
|
||||||
TWCR = (1<<TWINT) | (1<<TWEN);
|
|
||||||
|
|
||||||
i2c_delay();
|
|
||||||
|
|
||||||
if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
|
|
||||||
return 1; // slave did not acknowledge
|
|
||||||
else
|
|
||||||
return 0; // success
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
// Finish the i2c transaction.
|
|
||||||
void i2c_master_stop(void) {
|
|
||||||
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
|
|
||||||
|
|
||||||
uint16_t lim = 0;
|
|
||||||
while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
|
|
||||||
lim++;
|
|
||||||
}
|
|
||||||
|
|
||||||
// Write one byte to the i2c slave.
|
|
||||||
// returns 0 => slave ACK
|
|
||||||
// 1 => slave NACK
|
|
||||||
uint8_t i2c_master_write(uint8_t data) {
|
|
||||||
TWDR = data;
|
|
||||||
TWCR = (1<<TWINT) | (1<<TWEN);
|
|
||||||
|
|
||||||
i2c_delay();
|
|
||||||
|
|
||||||
// check if the slave acknowledged us
|
|
||||||
return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
|
|
||||||
// if ack=0 the acknowledge bit is not set.
|
|
||||||
// returns: byte read from i2c device
|
|
||||||
uint8_t i2c_master_read(int ack) {
|
|
||||||
TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
|
|
||||||
|
|
||||||
i2c_delay();
|
|
||||||
return TWDR;
|
|
||||||
}
|
|
||||||
|
|
||||||
void i2c_reset_state(void) {
|
|
||||||
TWCR = 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
void i2c_slave_init(uint8_t address) {
|
|
||||||
TWAR = address << 0; // slave i2c address
|
|
||||||
// TWEN - twi enable
|
|
||||||
// TWEA - enable address acknowledgement
|
|
||||||
// TWINT - twi interrupt flag
|
|
||||||
// TWIE - enable the twi interrupt
|
|
||||||
TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
|
|
||||||
}
|
|
||||||
|
|
||||||
ISR(TWI_vect);
|
|
||||||
|
|
||||||
ISR(TWI_vect) {
|
|
||||||
uint8_t ack = 1;
|
|
||||||
switch(TW_STATUS) {
|
|
||||||
case TW_SR_SLA_ACK:
|
|
||||||
// this device has been addressed as a slave receiver
|
|
||||||
slave_has_register_set = false;
|
|
||||||
break;
|
|
||||||
|
|
||||||
case TW_SR_DATA_ACK:
|
|
||||||
// this device has received data as a slave receiver
|
|
||||||
// The first byte that we receive in this transaction sets the location
|
|
||||||
// of the read/write location of the slaves memory that it exposes over
|
|
||||||
// i2c. After that, bytes will be written at slave_buffer_pos, incrementing
|
|
||||||
// slave_buffer_pos after each write.
|
|
||||||
if(!slave_has_register_set) {
|
|
||||||
slave_buffer_pos = TWDR;
|
|
||||||
// don't acknowledge the master if this memory loctaion is out of bounds
|
|
||||||
if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
|
|
||||||
ack = 0;
|
|
||||||
slave_buffer_pos = 0;
|
|
||||||
}
|
|
||||||
slave_has_register_set = true;
|
|
||||||
} else {
|
|
||||||
i2c_slave_buffer[slave_buffer_pos] = TWDR;
|
|
||||||
BUFFER_POS_INC();
|
|
||||||
}
|
|
||||||
break;
|
|
||||||
|
|
||||||
case TW_ST_SLA_ACK:
|
|
||||||
case TW_ST_DATA_ACK:
|
|
||||||
// master has addressed this device as a slave transmitter and is
|
|
||||||
// requesting data.
|
|
||||||
TWDR = i2c_slave_buffer[slave_buffer_pos];
|
|
||||||
BUFFER_POS_INC();
|
|
||||||
break;
|
|
||||||
|
|
||||||
case TW_BUS_ERROR: // something went wrong, reset twi state
|
|
||||||
TWCR = 0;
|
|
||||||
default:
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
// Reset everything, so we are ready for the next TWI interrupt
|
|
||||||
TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
@ -1,49 +0,0 @@
|
|||||||
#ifndef I2C_H
|
|
||||||
#define I2C_H
|
|
||||||
|
|
||||||
#include <stdint.h>
|
|
||||||
|
|
||||||
#ifndef F_CPU
|
|
||||||
#define F_CPU 16000000UL
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#define I2C_READ 1
|
|
||||||
#define I2C_WRITE 0
|
|
||||||
|
|
||||||
#define I2C_ACK 1
|
|
||||||
#define I2C_NACK 0
|
|
||||||
|
|
||||||
#define SLAVE_BUFFER_SIZE 0x10
|
|
||||||
|
|
||||||
// i2c SCL clock frequency
|
|
||||||
#define SCL_CLOCK 100000L
|
|
||||||
|
|
||||||
extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
|
|
||||||
|
|
||||||
void i2c_master_init(void);
|
|
||||||
uint8_t i2c_master_start(uint8_t address);
|
|
||||||
void i2c_master_stop(void);
|
|
||||||
uint8_t i2c_master_write(uint8_t data);
|
|
||||||
uint8_t i2c_master_read(int);
|
|
||||||
void i2c_reset_state(void);
|
|
||||||
void i2c_slave_init(uint8_t address);
|
|
||||||
|
|
||||||
|
|
||||||
static inline unsigned char i2c_start_read(unsigned char addr) {
|
|
||||||
return i2c_master_start((addr << 1) | I2C_READ);
|
|
||||||
}
|
|
||||||
|
|
||||||
static inline unsigned char i2c_start_write(unsigned char addr) {
|
|
||||||
return i2c_master_start((addr << 1) | I2C_WRITE);
|
|
||||||
}
|
|
||||||
|
|
||||||
// from SSD1306 scrips
|
|
||||||
extern unsigned char i2c_rep_start(unsigned char addr);
|
|
||||||
extern void i2c_start_wait(unsigned char addr);
|
|
||||||
extern unsigned char i2c_readAck(void);
|
|
||||||
extern unsigned char i2c_readNak(void);
|
|
||||||
extern unsigned char i2c_read(unsigned char ack);
|
|
||||||
|
|
||||||
#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak();
|
|
||||||
|
|
||||||
#endif
|
|
||||||
@ -7,6 +7,9 @@
|
|||||||
"layouts": {
|
"layouts": {
|
||||||
"LAYOUT": {
|
"LAYOUT": {
|
||||||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":7, "y":4}, {"x":8, "y":4}, {"x":9, "y":4}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}]
|
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":7, "y":4}, {"x":8, "y":4}, {"x":9, "y":4}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}]
|
||||||
|
},
|
||||||
|
"LAYOUT_ortho_5x12": {
|
||||||
|
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":7, "y":4}, {"x":8, "y":4}, {"x":9, "y":4}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}]
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|||||||
@ -15,10 +15,7 @@ You should have received a copy of the GNU General Public License
|
|||||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#ifndef CONFIG_USER_H
|
#pragma once
|
||||||
#define CONFIG_USER_H
|
|
||||||
|
|
||||||
#include "config_common.h"
|
|
||||||
|
|
||||||
/* Use I2C or Serial, not both */
|
/* Use I2C or Serial, not both */
|
||||||
|
|
||||||
@ -37,5 +34,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
#define RGBLIGHT_HUE_STEP 8
|
#define RGBLIGHT_HUE_STEP 8
|
||||||
#define RGBLIGHT_SAT_STEP 8
|
#define RGBLIGHT_SAT_STEP 8
|
||||||
#define RGBLIGHT_VAL_STEP 8
|
#define RGBLIGHT_VAL_STEP 8
|
||||||
|
|
||||||
#endif
|
|
||||||
|
|||||||
@ -1,5 +1 @@
|
|||||||
RGBLIGHT_ENABLE = yes
|
RGBLIGHT_ENABLE = yes
|
||||||
|
|
||||||
ifndef QUANTUM_DIR
|
|
||||||
include ../../../../Makefile
|
|
||||||
endif
|
|
||||||
|
|||||||
@ -15,10 +15,7 @@ You should have received a copy of the GNU General Public License
|
|||||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#ifndef CONFIG_USER_H
|
#pragma once
|
||||||
#define CONFIG_USER_H
|
|
||||||
|
|
||||||
#include "config_common.h"
|
|
||||||
|
|
||||||
/* Use I2C or Serial, not both */
|
/* Use I2C or Serial, not both */
|
||||||
|
|
||||||
@ -39,5 +36,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
#define RGBLIGHT_HUE_STEP 8
|
#define RGBLIGHT_HUE_STEP 8
|
||||||
#define RGBLIGHT_SAT_STEP 8
|
#define RGBLIGHT_SAT_STEP 8
|
||||||
#define RGBLIGHT_VAL_STEP 8
|
#define RGBLIGHT_VAL_STEP 8
|
||||||
|
|
||||||
#endif
|
|
||||||
|
|||||||
@ -1,5 +1,2 @@
|
|||||||
RGBLIGHT_ENABLE = yes
|
RGBLIGHT_ENABLE = yes
|
||||||
|
|
||||||
ifndef QUANTUM_DIR
|
|
||||||
include ../../../../Makefile
|
|
||||||
endif
|
|
||||||
|
|||||||
@ -1,497 +0,0 @@
|
|||||||
/*
|
|
||||||
Copyright 2017 Danny Nguyen <danny@keeb.io>
|
|
||||||
|
|
||||||
This program is free software: you can redistribute it and/or modify
|
|
||||||
it under the terms of the GNU General Public License as published by
|
|
||||||
the Free Software Foundation, either version 2 of the License, or
|
|
||||||
(at your option) any later version.
|
|
||||||
|
|
||||||
This program is distributed in the hope that it will be useful,
|
|
||||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
GNU General Public License for more details.
|
|
||||||
|
|
||||||
You should have received a copy of the GNU General Public License
|
|
||||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
||||||
*/
|
|
||||||
|
|
||||||
/*
|
|
||||||
* scan matrix
|
|
||||||
*/
|
|
||||||
#include <stdint.h>
|
|
||||||
#include <stdbool.h>
|
|
||||||
#include <avr/io.h>
|
|
||||||
#include "wait.h"
|
|
||||||
#include "print.h"
|
|
||||||
#include "debug.h"
|
|
||||||
#include "util.h"
|
|
||||||
#include "matrix.h"
|
|
||||||
#include "split_util.h"
|
|
||||||
#include "pro_micro.h"
|
|
||||||
#include "config.h"
|
|
||||||
#include "timer.h"
|
|
||||||
|
|
||||||
#ifdef BACKLIGHT_ENABLE
|
|
||||||
#include "backlight.h"
|
|
||||||
extern backlight_config_t backlight_config;
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#ifdef USE_I2C
|
|
||||||
# include "i2c.h"
|
|
||||||
#else // USE_SERIAL
|
|
||||||
# include "serial.h"
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#ifndef DEBOUNCING_DELAY
|
|
||||||
# define DEBOUNCING_DELAY 5
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if (DEBOUNCING_DELAY > 0)
|
|
||||||
static uint16_t debouncing_time;
|
|
||||||
static bool debouncing = false;
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if (MATRIX_COLS <= 8)
|
|
||||||
# define print_matrix_header() print("\nr/c 01234567\n")
|
|
||||||
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
|
|
||||||
# define matrix_bitpop(i) bitpop(matrix[i])
|
|
||||||
# define ROW_SHIFTER ((uint8_t)1)
|
|
||||||
#else
|
|
||||||
# error "Currently only supports 8 COLS"
|
|
||||||
#endif
|
|
||||||
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
|
|
||||||
|
|
||||||
#define ERROR_DISCONNECT_COUNT 5
|
|
||||||
|
|
||||||
#define SERIAL_LED_ADDR 0x00
|
|
||||||
|
|
||||||
#define ROWS_PER_HAND (MATRIX_ROWS/2)
|
|
||||||
|
|
||||||
static uint8_t error_count = 0;
|
|
||||||
|
|
||||||
static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
|
|
||||||
static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
|
|
||||||
|
|
||||||
/* matrix state(1:on, 0:off) */
|
|
||||||
static matrix_row_t matrix[MATRIX_ROWS];
|
|
||||||
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
|
|
||||||
|
|
||||||
#if (DIODE_DIRECTION == COL2ROW)
|
|
||||||
static void init_cols(void);
|
|
||||||
static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
|
|
||||||
static void unselect_rows(void);
|
|
||||||
static void select_row(uint8_t row);
|
|
||||||
static void unselect_row(uint8_t row);
|
|
||||||
#elif (DIODE_DIRECTION == ROW2COL)
|
|
||||||
static void init_rows(void);
|
|
||||||
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
|
|
||||||
static void unselect_cols(void);
|
|
||||||
static void unselect_col(uint8_t col);
|
|
||||||
static void select_col(uint8_t col);
|
|
||||||
#endif
|
|
||||||
|
|
||||||
__attribute__ ((weak))
|
|
||||||
void matrix_init_kb(void) {
|
|
||||||
matrix_init_user();
|
|
||||||
}
|
|
||||||
|
|
||||||
__attribute__ ((weak))
|
|
||||||
void matrix_scan_kb(void) {
|
|
||||||
matrix_scan_user();
|
|
||||||
}
|
|
||||||
|
|
||||||
__attribute__ ((weak))
|
|
||||||
void matrix_init_user(void) {
|
|
||||||
}
|
|
||||||
|
|
||||||
__attribute__ ((weak))
|
|
||||||
void matrix_scan_user(void) {
|
|
||||||
}
|
|
||||||
|
|
||||||
inline
|
|
||||||
uint8_t matrix_rows(void)
|
|
||||||
{
|
|
||||||
return MATRIX_ROWS;
|
|
||||||
}
|
|
||||||
|
|
||||||
inline
|
|
||||||
uint8_t matrix_cols(void)
|
|
||||||
{
|
|
||||||
return MATRIX_COLS;
|
|
||||||
}
|
|
||||||
|
|
||||||
void matrix_init(void)
|
|
||||||
{
|
|
||||||
#ifdef DISABLE_JTAG
|
|
||||||
// JTAG disable for PORT F. write JTD bit twice within four cycles.
|
|
||||||
MCUCR |= (1<<JTD);
|
|
||||||
MCUCR |= (1<<JTD);
|
|
||||||
#endif
|
|
||||||
|
|
||||||
debug_enable = true;
|
|
||||||
debug_matrix = true;
|
|
||||||
debug_mouse = true;
|
|
||||||
// initialize row and col
|
|
||||||
#if (DIODE_DIRECTION == COL2ROW)
|
|
||||||
unselect_rows();
|
|
||||||
init_cols();
|
|
||||||
#elif (DIODE_DIRECTION == ROW2COL)
|
|
||||||
unselect_cols();
|
|
||||||
init_rows();
|
|
||||||
#endif
|
|
||||||
|
|
||||||
TX_RX_LED_INIT;
|
|
||||||
|
|
||||||
// initialize matrix state: all keys off
|
|
||||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
|
|
||||||
matrix[i] = 0;
|
|
||||||
matrix_debouncing[i] = 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
matrix_init_quantum();
|
|
||||||
|
|
||||||
}
|
|
||||||
|
|
||||||
uint8_t _matrix_scan(void)
|
|
||||||
{
|
|
||||||
int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
|
|
||||||
#if (DIODE_DIRECTION == COL2ROW)
|
|
||||||
// Set row, read cols
|
|
||||||
for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
|
|
||||||
# if (DEBOUNCING_DELAY > 0)
|
|
||||||
bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row);
|
|
||||||
|
|
||||||
if (matrix_changed) {
|
|
||||||
debouncing = true;
|
|
||||||
debouncing_time = timer_read();
|
|
||||||
}
|
|
||||||
|
|
||||||
# else
|
|
||||||
read_cols_on_row(matrix+offset, current_row);
|
|
||||||
# endif
|
|
||||||
|
|
||||||
}
|
|
||||||
|
|
||||||
#elif (DIODE_DIRECTION == ROW2COL)
|
|
||||||
// Set col, read rows
|
|
||||||
for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
|
|
||||||
# if (DEBOUNCING_DELAY > 0)
|
|
||||||
bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col);
|
|
||||||
if (matrix_changed) {
|
|
||||||
debouncing = true;
|
|
||||||
debouncing_time = timer_read();
|
|
||||||
}
|
|
||||||
# else
|
|
||||||
read_rows_on_col(matrix+offset, current_col);
|
|
||||||
# endif
|
|
||||||
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
# if (DEBOUNCING_DELAY > 0)
|
|
||||||
if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
|
|
||||||
for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
|
|
||||||
matrix[i+offset] = matrix_debouncing[i+offset];
|
|
||||||
}
|
|
||||||
debouncing = false;
|
|
||||||
}
|
|
||||||
# endif
|
|
||||||
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
#ifdef USE_I2C
|
|
||||||
|
|
||||||
// Get rows from other half over i2c
|
|
||||||
int i2c_transaction(void) {
|
|
||||||
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
|
|
||||||
|
|
||||||
int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
|
|
||||||
if (err) goto i2c_error;
|
|
||||||
|
|
||||||
// start of matrix stored at 0x00
|
|
||||||
err = i2c_master_write(0x00);
|
|
||||||
if (err) goto i2c_error;
|
|
||||||
|
|
||||||
#ifdef BACKLIGHT_ENABLE
|
|
||||||
// Write backlight level for slave to read
|
|
||||||
err = i2c_master_write(backlight_config.enable ? backlight_config.level : 0);
|
|
||||||
#else
|
|
||||||
// Write zero, so our byte index is the same
|
|
||||||
err = i2c_master_write(0x00);
|
|
||||||
#endif
|
|
||||||
if (err) goto i2c_error;
|
|
||||||
|
|
||||||
// Start read
|
|
||||||
err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
|
|
||||||
if (err) goto i2c_error;
|
|
||||||
|
|
||||||
if (!err) {
|
|
||||||
int i;
|
|
||||||
for (i = 0; i < ROWS_PER_HAND-1; ++i) {
|
|
||||||
matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
|
|
||||||
}
|
|
||||||
matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
|
|
||||||
i2c_master_stop();
|
|
||||||
} else {
|
|
||||||
i2c_error: // the cable is disconnceted, or something else went wrong
|
|
||||||
i2c_reset_state();
|
|
||||||
return err;
|
|
||||||
}
|
|
||||||
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
#else // USE_SERIAL
|
|
||||||
|
|
||||||
int serial_transaction(void) {
|
|
||||||
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
|
|
||||||
|
|
||||||
if (serial_update_buffers()) {
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
for (int i = 0; i < ROWS_PER_HAND; ++i) {
|
|
||||||
matrix[slaveOffset+i] = serial_slave_buffer[i];
|
|
||||||
}
|
|
||||||
|
|
||||||
#ifdef BACKLIGHT_ENABLE
|
|
||||||
// Write backlight level for slave to read
|
|
||||||
serial_master_buffer[SERIAL_LED_ADDR] = backlight_config.enable ? backlight_config.level : 0;
|
|
||||||
#endif
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
uint8_t matrix_scan(void)
|
|
||||||
{
|
|
||||||
uint8_t ret = _matrix_scan();
|
|
||||||
|
|
||||||
#ifdef USE_I2C
|
|
||||||
if( i2c_transaction() ) {
|
|
||||||
#else // USE_SERIAL
|
|
||||||
if( serial_transaction() ) {
|
|
||||||
#endif
|
|
||||||
// turn on the indicator led when halves are disconnected
|
|
||||||
TXLED1;
|
|
||||||
|
|
||||||
error_count++;
|
|
||||||
|
|
||||||
if (error_count > ERROR_DISCONNECT_COUNT) {
|
|
||||||
// reset other half if disconnected
|
|
||||||
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
|
|
||||||
for (int i = 0; i < ROWS_PER_HAND; ++i) {
|
|
||||||
matrix[slaveOffset+i] = 0;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
} else {
|
|
||||||
// turn off the indicator led on no error
|
|
||||||
TXLED0;
|
|
||||||
error_count = 0;
|
|
||||||
}
|
|
||||||
matrix_scan_quantum();
|
|
||||||
return ret;
|
|
||||||
}
|
|
||||||
|
|
||||||
void matrix_slave_scan(void) {
|
|
||||||
_matrix_scan();
|
|
||||||
|
|
||||||
int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
|
|
||||||
|
|
||||||
#ifdef USE_I2C
|
|
||||||
#ifdef BACKLIGHT_ENABLE
|
|
||||||
// Read backlight level sent from master and update level on slave
|
|
||||||
backlight_set(i2c_slave_buffer[0]);
|
|
||||||
#endif
|
|
||||||
for (int i = 0; i < ROWS_PER_HAND; ++i) {
|
|
||||||
i2c_slave_buffer[i+1] = matrix[offset+i];
|
|
||||||
}
|
|
||||||
#else // USE_SERIAL
|
|
||||||
for (int i = 0; i < ROWS_PER_HAND; ++i) {
|
|
||||||
serial_slave_buffer[i] = matrix[offset+i];
|
|
||||||
}
|
|
||||||
|
|
||||||
#ifdef BACKLIGHT_ENABLE
|
|
||||||
// Read backlight level sent from master and update level on slave
|
|
||||||
backlight_set(serial_master_buffer[SERIAL_LED_ADDR]);
|
|
||||||
#endif
|
|
||||||
#endif
|
|
||||||
}
|
|
||||||
|
|
||||||
bool matrix_is_modified(void)
|
|
||||||
{
|
|
||||||
#if (DEBOUNCING_DELAY > 0)
|
|
||||||
if (debouncing) return false;
|
|
||||||
#endif
|
|
||||||
return true;
|
|
||||||
}
|
|
||||||
|
|
||||||
inline
|
|
||||||
bool matrix_is_on(uint8_t row, uint8_t col)
|
|
||||||
{
|
|
||||||
return (matrix[row] & ((matrix_row_t)1<<col));
|
|
||||||
}
|
|
||||||
|
|
||||||
inline
|
|
||||||
matrix_row_t matrix_get_row(uint8_t row)
|
|
||||||
{
|
|
||||||
return matrix[row];
|
|
||||||
}
|
|
||||||
|
|
||||||
void matrix_print(void)
|
|
||||||
{
|
|
||||||
print("\nr/c 0123456789ABCDEF\n");
|
|
||||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
|
|
||||||
phex(row); print(": ");
|
|
||||||
pbin_reverse16(matrix_get_row(row));
|
|
||||||
print("\n");
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
uint8_t matrix_key_count(void)
|
|
||||||
{
|
|
||||||
uint8_t count = 0;
|
|
||||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
|
||||||
count += bitpop16(matrix[i]);
|
|
||||||
}
|
|
||||||
return count;
|
|
||||||
}
|
|
||||||
|
|
||||||
#if (DIODE_DIRECTION == COL2ROW)
|
|
||||||
|
|
||||||
static void init_cols(void)
|
|
||||||
{
|
|
||||||
for(uint8_t x = 0; x < MATRIX_COLS; x++) {
|
|
||||||
uint8_t pin = col_pins[x];
|
|
||||||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
|
|
||||||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
|
|
||||||
{
|
|
||||||
// Store last value of row prior to reading
|
|
||||||
matrix_row_t last_row_value = current_matrix[current_row];
|
|
||||||
|
|
||||||
// Clear data in matrix row
|
|
||||||
current_matrix[current_row] = 0;
|
|
||||||
|
|
||||||
// Select row and wait for row selecton to stabilize
|
|
||||||
select_row(current_row);
|
|
||||||
wait_us(30);
|
|
||||||
|
|
||||||
// For each col...
|
|
||||||
for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
|
|
||||||
|
|
||||||
// Select the col pin to read (active low)
|
|
||||||
uint8_t pin = col_pins[col_index];
|
|
||||||
uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
|
|
||||||
|
|
||||||
// Populate the matrix row with the state of the col pin
|
|
||||||
current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index);
|
|
||||||
}
|
|
||||||
|
|
||||||
// Unselect row
|
|
||||||
unselect_row(current_row);
|
|
||||||
|
|
||||||
return (last_row_value != current_matrix[current_row]);
|
|
||||||
}
|
|
||||||
|
|
||||||
static void select_row(uint8_t row)
|
|
||||||
{
|
|
||||||
uint8_t pin = row_pins[row];
|
|
||||||
_SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT
|
|
||||||
_SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
|
|
||||||
}
|
|
||||||
|
|
||||||
static void unselect_row(uint8_t row)
|
|
||||||
{
|
|
||||||
uint8_t pin = row_pins[row];
|
|
||||||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
|
|
||||||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
|
|
||||||
}
|
|
||||||
|
|
||||||
static void unselect_rows(void)
|
|
||||||
{
|
|
||||||
for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
|
|
||||||
uint8_t pin = row_pins[x];
|
|
||||||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
|
|
||||||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
#elif (DIODE_DIRECTION == ROW2COL)
|
|
||||||
|
|
||||||
static void init_rows(void)
|
|
||||||
{
|
|
||||||
for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
|
|
||||||
uint8_t pin = row_pins[x];
|
|
||||||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
|
|
||||||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
|
|
||||||
{
|
|
||||||
bool matrix_changed = false;
|
|
||||||
|
|
||||||
// Select col and wait for col selecton to stabilize
|
|
||||||
select_col(current_col);
|
|
||||||
wait_us(30);
|
|
||||||
|
|
||||||
// For each row...
|
|
||||||
for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++)
|
|
||||||
{
|
|
||||||
|
|
||||||
// Store last value of row prior to reading
|
|
||||||
matrix_row_t last_row_value = current_matrix[row_index];
|
|
||||||
|
|
||||||
// Check row pin state
|
|
||||||
if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
|
|
||||||
{
|
|
||||||
// Pin LO, set col bit
|
|
||||||
current_matrix[row_index] |= (ROW_SHIFTER << current_col);
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
// Pin HI, clear col bit
|
|
||||||
current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
|
|
||||||
}
|
|
||||||
|
|
||||||
// Determine if the matrix changed state
|
|
||||||
if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
|
|
||||||
{
|
|
||||||
matrix_changed = true;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
// Unselect col
|
|
||||||
unselect_col(current_col);
|
|
||||||
|
|
||||||
return matrix_changed;
|
|
||||||
}
|
|
||||||
|
|
||||||
static void select_col(uint8_t col)
|
|
||||||
{
|
|
||||||
uint8_t pin = col_pins[col];
|
|
||||||
_SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT
|
|
||||||
_SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
|
|
||||||
}
|
|
||||||
|
|
||||||
static void unselect_col(uint8_t col)
|
|
||||||
{
|
|
||||||
uint8_t pin = col_pins[col];
|
|
||||||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
|
|
||||||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
|
|
||||||
}
|
|
||||||
|
|
||||||
static void unselect_cols(void)
|
|
||||||
{
|
|
||||||
for(uint8_t x = 0; x < MATRIX_COLS; x++) {
|
|
||||||
uint8_t pin = col_pins[x];
|
|
||||||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
|
|
||||||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
#endif
|
|
||||||
@ -1,5 +1,4 @@
|
|||||||
#ifndef NYQUIST_H
|
#pragma once
|
||||||
#define NYQUIST_H
|
|
||||||
|
|
||||||
#ifdef KEYBOARD_nyquist_rev1
|
#ifdef KEYBOARD_nyquist_rev1
|
||||||
#include "rev1.h"
|
#include "rev1.h"
|
||||||
@ -7,6 +6,9 @@
|
|||||||
#ifdef KEYBOARD_nyquist_rev2
|
#ifdef KEYBOARD_nyquist_rev2
|
||||||
#include "rev2.h"
|
#include "rev2.h"
|
||||||
#endif
|
#endif
|
||||||
|
#ifdef KEYBOARD_nyquist_rev3
|
||||||
|
#include "rev3.h"
|
||||||
|
#endif
|
||||||
|
|
||||||
#include "quantum.h"
|
#include "quantum.h"
|
||||||
|
|
||||||
@ -26,4 +28,4 @@
|
|||||||
KC_##L40, KC_##L41, KC_##L42, KC_##L43, KC_##L44, KC_##L45, KC_##R40, KC_##R41, KC_##R42, KC_##R43, KC_##R44, KC_##R45 \
|
KC_##L40, KC_##L41, KC_##L42, KC_##L43, KC_##L44, KC_##L45, KC_##R40, KC_##R41, KC_##R42, KC_##R43, KC_##R44, KC_##R45 \
|
||||||
)
|
)
|
||||||
|
|
||||||
#endif
|
#define LAYOUT_kc_ortho_5x12 LAYOUT_kc
|
||||||
|
|||||||
@ -15,10 +15,7 @@ You should have received a copy of the GNU General Public License
|
|||||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#ifndef REV1_CONFIG_H
|
#pragma once
|
||||||
#define REV1_CONFIG_H
|
|
||||||
|
|
||||||
#include QMK_KEYBOARD_CONFIG_H
|
|
||||||
|
|
||||||
/* USB Device descriptor parameter */
|
/* USB Device descriptor parameter */
|
||||||
#define VENDOR_ID 0xCB10
|
#define VENDOR_ID 0xCB10
|
||||||
@ -81,5 +78,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
//#define NO_ACTION_ONESHOT
|
//#define NO_ACTION_ONESHOT
|
||||||
//#define NO_ACTION_MACRO
|
//#define NO_ACTION_MACRO
|
||||||
//#define NO_ACTION_FUNCTION
|
//#define NO_ACTION_FUNCTION
|
||||||
|
|
||||||
#endif
|
|
||||||
|
|||||||
@ -1,5 +1,4 @@
|
|||||||
#ifndef REV1_H
|
#pragma once
|
||||||
#define REV1_H
|
|
||||||
|
|
||||||
#include "nyquist.h"
|
#include "nyquist.h"
|
||||||
|
|
||||||
@ -64,5 +63,3 @@
|
|||||||
#endif
|
#endif
|
||||||
|
|
||||||
#define LAYOUT_ortho_5x12 LAYOUT
|
#define LAYOUT_ortho_5x12 LAYOUT
|
||||||
|
|
||||||
#endif
|
|
||||||
|
|||||||
@ -15,10 +15,7 @@ You should have received a copy of the GNU General Public License
|
|||||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#ifndef REV2_CONFIG_H
|
#pragma once
|
||||||
#define REV2_CONFIG_H
|
|
||||||
|
|
||||||
#include QMK_KEYBOARD_CONFIG_H
|
|
||||||
|
|
||||||
/* USB Device descriptor parameter */
|
/* USB Device descriptor parameter */
|
||||||
#define VENDOR_ID 0xCB10
|
#define VENDOR_ID 0xCB10
|
||||||
@ -82,5 +79,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
//#define NO_ACTION_ONESHOT
|
//#define NO_ACTION_ONESHOT
|
||||||
//#define NO_ACTION_MACRO
|
//#define NO_ACTION_MACRO
|
||||||
//#define NO_ACTION_FUNCTION
|
//#define NO_ACTION_FUNCTION
|
||||||
|
|
||||||
#endif
|
|
||||||
|
|||||||
@ -1,5 +1,4 @@
|
|||||||
#ifndef REV2_H
|
#pragma once
|
||||||
#define REV2_H
|
|
||||||
|
|
||||||
#include "nyquist.h"
|
#include "nyquist.h"
|
||||||
|
|
||||||
@ -64,5 +63,3 @@
|
|||||||
#endif
|
#endif
|
||||||
|
|
||||||
#define LAYOUT_ortho_5x12 LAYOUT
|
#define LAYOUT_ortho_5x12 LAYOUT
|
||||||
|
|
||||||
#endif
|
|
||||||
|
|||||||
81
keyboards/nyquist/rev3/config.h
Normal file
81
keyboards/nyquist/rev3/config.h
Normal file
@ -0,0 +1,81 @@
|
|||||||
|
/*
|
||||||
|
Copyright 2017 Danny Nguyen <danny@keeb.io>
|
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 2 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
/* USB Device descriptor parameter */
|
||||||
|
#define VENDOR_ID 0xCB10
|
||||||
|
#define PRODUCT_ID 0x1156
|
||||||
|
#define DEVICE_VER 0x0300
|
||||||
|
#define MANUFACTURER Keebio
|
||||||
|
#define PRODUCT The Nyquist Keyboard
|
||||||
|
#define DESCRIPTION Split 60 percent ortholinear keyboard
|
||||||
|
|
||||||
|
/* key matrix size */
|
||||||
|
// Rows are doubled-up
|
||||||
|
#define MATRIX_ROWS 10
|
||||||
|
#define MATRIX_COLS 6
|
||||||
|
|
||||||
|
// wiring of each half
|
||||||
|
#define MATRIX_ROW_PINS { F0, F5, D7, F6, F7 }
|
||||||
|
#define MATRIX_COL_PINS { F1, F4, B7, D2, D3, D4 }
|
||||||
|
|
||||||
|
/* COL2ROW or ROW2COL */
|
||||||
|
#define DIODE_DIRECTION COL2ROW
|
||||||
|
|
||||||
|
/* define if matrix has ghost */
|
||||||
|
//#define MATRIX_HAS_GHOST
|
||||||
|
|
||||||
|
/* Set 0 if debouncing isn't needed */
|
||||||
|
#define DEBOUNCING_DELAY 5
|
||||||
|
|
||||||
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||||
|
#define LOCKING_SUPPORT_ENABLE
|
||||||
|
/* Locking resynchronize hack */
|
||||||
|
#define LOCKING_RESYNC_ENABLE
|
||||||
|
|
||||||
|
/* key combination for command */
|
||||||
|
#define IS_COMMAND() ( \
|
||||||
|
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||||
|
)
|
||||||
|
|
||||||
|
/* ws2812 RGB LED */
|
||||||
|
#define RGB_DI_PIN B4
|
||||||
|
#define RGBLIGHT_TIMER
|
||||||
|
#define RGBLED_NUM 12
|
||||||
|
|
||||||
|
/* Backlight LEDs */
|
||||||
|
#define BACKLIGHT_PIN D5
|
||||||
|
#define BACKLIGHT_LEVELS 7
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Feature disable options
|
||||||
|
* These options are also useful to firmware size reduction.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* disable debug print */
|
||||||
|
// #define NO_DEBUG
|
||||||
|
|
||||||
|
/* disable print */
|
||||||
|
// #define NO_PRINT
|
||||||
|
|
||||||
|
/* disable action features */
|
||||||
|
//#define NO_ACTION_LAYER
|
||||||
|
//#define NO_ACTION_TAPPING
|
||||||
|
//#define NO_ACTION_ONESHOT
|
||||||
|
//#define NO_ACTION_MACRO
|
||||||
|
//#define NO_ACTION_FUNCTION
|
||||||
21
keyboards/nyquist/rev3/rev3.c
Normal file
21
keyboards/nyquist/rev3/rev3.c
Normal file
@ -0,0 +1,21 @@
|
|||||||
|
#include "rev3.h"
|
||||||
|
|
||||||
|
#ifdef SSD1306OLED
|
||||||
|
void led_set_kb(uint8_t usb_led) {
|
||||||
|
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||||
|
led_set_user(usb_led);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
void matrix_init_kb(void) {
|
||||||
|
|
||||||
|
// // green led on
|
||||||
|
// DDRD |= (1<<5);
|
||||||
|
// PORTD &= ~(1<<5);
|
||||||
|
|
||||||
|
// // orange led on
|
||||||
|
// DDRB |= (1<<0);
|
||||||
|
// PORTB &= ~(1<<0);
|
||||||
|
|
||||||
|
matrix_init_user();
|
||||||
|
};
|
||||||
63
keyboards/nyquist/rev3/rev3.h
Normal file
63
keyboards/nyquist/rev3/rev3.h
Normal file
@ -0,0 +1,63 @@
|
|||||||
|
#pragma once
|
||||||
|
|
||||||
|
#include "nyquist.h"
|
||||||
|
#include "quantum.h"
|
||||||
|
|
||||||
|
#ifdef USE_I2C
|
||||||
|
#include <stddef.h>
|
||||||
|
#ifdef __AVR__
|
||||||
|
#include <avr/io.h>
|
||||||
|
#include <avr/interrupt.h>
|
||||||
|
#endif
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//void promicro_bootloader_jmp(bool program);
|
||||||
|
|
||||||
|
#ifndef FLIP_HALF
|
||||||
|
// Standard Keymap
|
||||||
|
// (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left)
|
||||||
|
#define LAYOUT( \
|
||||||
|
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
|
||||||
|
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
|
||||||
|
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
|
||||||
|
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, \
|
||||||
|
L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, R45 \
|
||||||
|
) \
|
||||||
|
{ \
|
||||||
|
{ L00, L01, L02, L03, L04, L05 }, \
|
||||||
|
{ L10, L11, L12, L13, L14, L15 }, \
|
||||||
|
{ L20, L21, L22, L23, L24, L25 }, \
|
||||||
|
{ L30, L31, L32, L33, L34, L35 }, \
|
||||||
|
{ L40, L41, L42, L43, L44, L45 }, \
|
||||||
|
{ R05, R04, R03, R02, R01, R00 }, \
|
||||||
|
{ R15, R14, R13, R12, R11, R10 }, \
|
||||||
|
{ R25, R24, R23, R22, R21, R20 }, \
|
||||||
|
{ R35, R34, R33, R32, R31, R30 }, \
|
||||||
|
{ R45, R44, R43, R42, R41, R40 } \
|
||||||
|
}
|
||||||
|
#else
|
||||||
|
// Keymap with right side flipped
|
||||||
|
// (TRRS jack on both halves are to the right)
|
||||||
|
#define LAYOUT( \
|
||||||
|
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
|
||||||
|
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
|
||||||
|
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
|
||||||
|
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, \
|
||||||
|
L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, R45 \
|
||||||
|
) \
|
||||||
|
{ \
|
||||||
|
{ L00, L01, L02, L03, L04, L05 }, \
|
||||||
|
{ L10, L11, L12, L13, L14, L15 }, \
|
||||||
|
{ L20, L21, L22, L23, L24, L25 }, \
|
||||||
|
{ L30, L31, L32, L33, L34, L35 }, \
|
||||||
|
{ L40, L41, L42, L43, L44, L45 }, \
|
||||||
|
{ R00, R01, R02, R03, R04, R05 }, \
|
||||||
|
{ R10, R11, R12, R13, R14, R15 }, \
|
||||||
|
{ R20, R21, R22, R23, R24, R25 }, \
|
||||||
|
{ R30, R31, R32, R33, R34, R35 }, \
|
||||||
|
{ R40, R41, R42, R43, R44, R45 } \
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define LAYOUT_ortho_5x12 LAYOUT
|
||||||
|
|
||||||
1
keyboards/nyquist/rev3/rules.mk
Normal file
1
keyboards/nyquist/rev3/rules.mk
Normal file
@ -0,0 +1 @@
|
|||||||
|
BACKLIGHT_ENABLE = yes
|
||||||
@ -1,8 +1,3 @@
|
|||||||
SRC += matrix.c \
|
|
||||||
i2c.c \
|
|
||||||
split_util.c \
|
|
||||||
serial.c
|
|
||||||
|
|
||||||
# MCU name
|
# MCU name
|
||||||
#MCU = at90usb1287
|
#MCU = at90usb1287
|
||||||
MCU = atmega32u4
|
MCU = atmega32u4
|
||||||
@ -41,9 +36,13 @@ F_USB = $(F_CPU)
|
|||||||
|
|
||||||
# Bootloader
|
# Bootloader
|
||||||
# This definition is optional, and if your keyboard supports multiple bootloaders of
|
# This definition is optional, and if your keyboard supports multiple bootloaders of
|
||||||
# different sizes, comment this out, and the correct address will be loaded
|
# different sizes, comment this out, and the correct address will be loaded
|
||||||
# automatically (+60). See bootloader.mk for all options.
|
# automatically (+60). See bootloader.mk for all options.
|
||||||
BOOTLOADER = caterina
|
ifeq ($(strip $(KEYBOARD)), nyquist/rev3)
|
||||||
|
BOOTLOADER = dfu
|
||||||
|
else
|
||||||
|
BOOTLOADER = caterina
|
||||||
|
endif
|
||||||
|
|
||||||
# Interrupt driven control endpoint task(+60)
|
# Interrupt driven control endpoint task(+60)
|
||||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
@ -63,13 +62,10 @@ MIDI_ENABLE = no # MIDI controls
|
|||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
USE_I2C = yes
|
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
|
||||||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
|
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
|
|
||||||
CUSTOM_MATRIX = yes
|
SPLIT_KEYBOARD = yes
|
||||||
|
|
||||||
LAYOUTS = ortho_5x12
|
LAYOUTS = ortho_5x12
|
||||||
|
|
||||||
DEFAULT_FOLDER = nyquist/rev2
|
DEFAULT_FOLDER = nyquist/rev2
|
||||||
|
|||||||
@ -1,228 +0,0 @@
|
|||||||
/*
|
|
||||||
* WARNING: be careful changing this code, it is very timing dependent
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifndef F_CPU
|
|
||||||
#define F_CPU 16000000
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#include <avr/io.h>
|
|
||||||
#include <avr/interrupt.h>
|
|
||||||
#include <util/delay.h>
|
|
||||||
#include <stdbool.h>
|
|
||||||
#include "serial.h"
|
|
||||||
|
|
||||||
#ifndef USE_I2C
|
|
||||||
|
|
||||||
// Serial pulse period in microseconds. Its probably a bad idea to lower this
|
|
||||||
// value.
|
|
||||||
#define SERIAL_DELAY 24
|
|
||||||
|
|
||||||
uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
|
|
||||||
uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
|
|
||||||
|
|
||||||
#define SLAVE_DATA_CORRUPT (1<<0)
|
|
||||||
volatile uint8_t status = 0;
|
|
||||||
|
|
||||||
inline static
|
|
||||||
void serial_delay(void) {
|
|
||||||
_delay_us(SERIAL_DELAY);
|
|
||||||
}
|
|
||||||
|
|
||||||
inline static
|
|
||||||
void serial_output(void) {
|
|
||||||
SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
|
|
||||||
}
|
|
||||||
|
|
||||||
// make the serial pin an input with pull-up resistor
|
|
||||||
inline static
|
|
||||||
void serial_input(void) {
|
|
||||||
SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK;
|
|
||||||
SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
|
|
||||||
}
|
|
||||||
|
|
||||||
inline static
|
|
||||||
uint8_t serial_read_pin(void) {
|
|
||||||
return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
|
|
||||||
}
|
|
||||||
|
|
||||||
inline static
|
|
||||||
void serial_low(void) {
|
|
||||||
SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
|
|
||||||
}
|
|
||||||
|
|
||||||
inline static
|
|
||||||
void serial_high(void) {
|
|
||||||
SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
|
|
||||||
}
|
|
||||||
|
|
||||||
void serial_master_init(void) {
|
|
||||||
serial_output();
|
|
||||||
serial_high();
|
|
||||||
}
|
|
||||||
|
|
||||||
void serial_slave_init(void) {
|
|
||||||
serial_input();
|
|
||||||
|
|
||||||
// Enable INT0
|
|
||||||
EIMSK |= _BV(INT0);
|
|
||||||
// Trigger on falling edge of INT0
|
|
||||||
EICRA &= ~(_BV(ISC00) | _BV(ISC01));
|
|
||||||
}
|
|
||||||
|
|
||||||
// Used by the master to synchronize timing with the slave.
|
|
||||||
static
|
|
||||||
void sync_recv(void) {
|
|
||||||
serial_input();
|
|
||||||
// This shouldn't hang if the slave disconnects because the
|
|
||||||
// serial line will float to high if the slave does disconnect.
|
|
||||||
while (!serial_read_pin());
|
|
||||||
serial_delay();
|
|
||||||
}
|
|
||||||
|
|
||||||
// Used by the slave to send a synchronization signal to the master.
|
|
||||||
static
|
|
||||||
void sync_send(void) {
|
|
||||||
serial_output();
|
|
||||||
|
|
||||||
serial_low();
|
|
||||||
serial_delay();
|
|
||||||
|
|
||||||
serial_high();
|
|
||||||
}
|
|
||||||
|
|
||||||
// Reads a byte from the serial line
|
|
||||||
static
|
|
||||||
uint8_t serial_read_byte(void) {
|
|
||||||
uint8_t byte = 0;
|
|
||||||
serial_input();
|
|
||||||
for ( uint8_t i = 0; i < 8; ++i) {
|
|
||||||
byte = (byte << 1) | serial_read_pin();
|
|
||||||
serial_delay();
|
|
||||||
_delay_us(1);
|
|
||||||
}
|
|
||||||
|
|
||||||
return byte;
|
|
||||||
}
|
|
||||||
|
|
||||||
// Sends a byte with MSB ordering
|
|
||||||
static
|
|
||||||
void serial_write_byte(uint8_t data) {
|
|
||||||
uint8_t b = 8;
|
|
||||||
serial_output();
|
|
||||||
while( b-- ) {
|
|
||||||
if(data & (1 << b)) {
|
|
||||||
serial_high();
|
|
||||||
} else {
|
|
||||||
serial_low();
|
|
||||||
}
|
|
||||||
serial_delay();
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
// interrupt handle to be used by the slave device
|
|
||||||
ISR(SERIAL_PIN_INTERRUPT) {
|
|
||||||
sync_send();
|
|
||||||
|
|
||||||
uint8_t checksum = 0;
|
|
||||||
for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
|
|
||||||
serial_write_byte(serial_slave_buffer[i]);
|
|
||||||
sync_send();
|
|
||||||
checksum += serial_slave_buffer[i];
|
|
||||||
}
|
|
||||||
serial_write_byte(checksum);
|
|
||||||
sync_send();
|
|
||||||
|
|
||||||
// wait for the sync to finish sending
|
|
||||||
serial_delay();
|
|
||||||
|
|
||||||
// read the middle of pulses
|
|
||||||
_delay_us(SERIAL_DELAY/2);
|
|
||||||
|
|
||||||
uint8_t checksum_computed = 0;
|
|
||||||
for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
|
|
||||||
serial_master_buffer[i] = serial_read_byte();
|
|
||||||
sync_send();
|
|
||||||
checksum_computed += serial_master_buffer[i];
|
|
||||||
}
|
|
||||||
uint8_t checksum_received = serial_read_byte();
|
|
||||||
sync_send();
|
|
||||||
|
|
||||||
serial_input(); // end transaction
|
|
||||||
|
|
||||||
if ( checksum_computed != checksum_received ) {
|
|
||||||
status |= SLAVE_DATA_CORRUPT;
|
|
||||||
} else {
|
|
||||||
status &= ~SLAVE_DATA_CORRUPT;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
inline
|
|
||||||
bool serial_slave_DATA_CORRUPT(void) {
|
|
||||||
return status & SLAVE_DATA_CORRUPT;
|
|
||||||
}
|
|
||||||
|
|
||||||
// Copies the serial_slave_buffer to the master and sends the
|
|
||||||
// serial_master_buffer to the slave.
|
|
||||||
//
|
|
||||||
// Returns:
|
|
||||||
// 0 => no error
|
|
||||||
// 1 => slave did not respond
|
|
||||||
int serial_update_buffers(void) {
|
|
||||||
// this code is very time dependent, so we need to disable interrupts
|
|
||||||
cli();
|
|
||||||
|
|
||||||
// signal to the slave that we want to start a transaction
|
|
||||||
serial_output();
|
|
||||||
serial_low();
|
|
||||||
_delay_us(1);
|
|
||||||
|
|
||||||
// wait for the slaves response
|
|
||||||
serial_input();
|
|
||||||
serial_high();
|
|
||||||
_delay_us(SERIAL_DELAY);
|
|
||||||
|
|
||||||
// check if the slave is present
|
|
||||||
if (serial_read_pin()) {
|
|
||||||
// slave failed to pull the line low, assume not present
|
|
||||||
sei();
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
// if the slave is present syncronize with it
|
|
||||||
sync_recv();
|
|
||||||
|
|
||||||
uint8_t checksum_computed = 0;
|
|
||||||
// receive data from the slave
|
|
||||||
for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
|
|
||||||
serial_slave_buffer[i] = serial_read_byte();
|
|
||||||
sync_recv();
|
|
||||||
checksum_computed += serial_slave_buffer[i];
|
|
||||||
}
|
|
||||||
uint8_t checksum_received = serial_read_byte();
|
|
||||||
sync_recv();
|
|
||||||
|
|
||||||
if (checksum_computed != checksum_received) {
|
|
||||||
sei();
|
|
||||||
return 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
uint8_t checksum = 0;
|
|
||||||
// send data to the slave
|
|
||||||
for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
|
|
||||||
serial_write_byte(serial_master_buffer[i]);
|
|
||||||
sync_recv();
|
|
||||||
checksum += serial_master_buffer[i];
|
|
||||||
}
|
|
||||||
serial_write_byte(checksum);
|
|
||||||
sync_recv();
|
|
||||||
|
|
||||||
// always, release the line when not in use
|
|
||||||
serial_output();
|
|
||||||
serial_high();
|
|
||||||
|
|
||||||
sei();
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
#endif
|
|
||||||
@ -1,26 +0,0 @@
|
|||||||
#ifndef MY_SERIAL_H
|
|
||||||
#define MY_SERIAL_H
|
|
||||||
|
|
||||||
#include "config.h"
|
|
||||||
#include <stdbool.h>
|
|
||||||
|
|
||||||
/* TODO: some defines for interrupt setup */
|
|
||||||
#define SERIAL_PIN_DDR DDRD
|
|
||||||
#define SERIAL_PIN_PORT PORTD
|
|
||||||
#define SERIAL_PIN_INPUT PIND
|
|
||||||
#define SERIAL_PIN_MASK _BV(PD0)
|
|
||||||
#define SERIAL_PIN_INTERRUPT INT0_vect
|
|
||||||
|
|
||||||
#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
|
|
||||||
#define SERIAL_MASTER_BUFFER_LENGTH 1
|
|
||||||
|
|
||||||
// Buffers for master - slave communication
|
|
||||||
extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
|
|
||||||
extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
|
|
||||||
|
|
||||||
void serial_master_init(void);
|
|
||||||
void serial_slave_init(void);
|
|
||||||
int serial_update_buffers(void);
|
|
||||||
bool serial_slave_data_corrupt(void);
|
|
||||||
|
|
||||||
#endif
|
|
||||||
@ -1,86 +0,0 @@
|
|||||||
#include <avr/io.h>
|
|
||||||
#include <avr/wdt.h>
|
|
||||||
#include <avr/power.h>
|
|
||||||
#include <avr/interrupt.h>
|
|
||||||
#include <util/delay.h>
|
|
||||||
#include <avr/eeprom.h>
|
|
||||||
#include "split_util.h"
|
|
||||||
#include "matrix.h"
|
|
||||||
#include "keyboard.h"
|
|
||||||
#include "config.h"
|
|
||||||
#include "timer.h"
|
|
||||||
|
|
||||||
#ifdef USE_I2C
|
|
||||||
# include "i2c.h"
|
|
||||||
#else
|
|
||||||
# include "serial.h"
|
|
||||||
#endif
|
|
||||||
|
|
||||||
volatile bool isLeftHand = true;
|
|
||||||
|
|
||||||
static void setup_handedness(void) {
|
|
||||||
#ifdef EE_HANDS
|
|
||||||
isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
|
|
||||||
#else
|
|
||||||
// I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
|
|
||||||
#if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
|
|
||||||
isLeftHand = !has_usb();
|
|
||||||
#else
|
|
||||||
isLeftHand = has_usb();
|
|
||||||
#endif
|
|
||||||
#endif
|
|
||||||
}
|
|
||||||
|
|
||||||
static void keyboard_master_setup(void) {
|
|
||||||
#ifdef USE_I2C
|
|
||||||
i2c_master_init();
|
|
||||||
#ifdef SSD1306OLED
|
|
||||||
matrix_master_OLED_init ();
|
|
||||||
#endif
|
|
||||||
#else
|
|
||||||
serial_master_init();
|
|
||||||
#endif
|
|
||||||
}
|
|
||||||
|
|
||||||
static void keyboard_slave_setup(void) {
|
|
||||||
timer_init();
|
|
||||||
#ifdef USE_I2C
|
|
||||||
i2c_slave_init(SLAVE_I2C_ADDRESS);
|
|
||||||
#else
|
|
||||||
serial_slave_init();
|
|
||||||
#endif
|
|
||||||
}
|
|
||||||
|
|
||||||
bool has_usb(void) {
|
|
||||||
USBCON |= (1 << OTGPADE); //enables VBUS pad
|
|
||||||
_delay_us(5);
|
|
||||||
return (USBSTA & (1<<VBUS)); //checks state of VBUS
|
|
||||||
}
|
|
||||||
|
|
||||||
void split_keyboard_setup(void) {
|
|
||||||
setup_handedness();
|
|
||||||
|
|
||||||
if (has_usb()) {
|
|
||||||
keyboard_master_setup();
|
|
||||||
} else {
|
|
||||||
keyboard_slave_setup();
|
|
||||||
}
|
|
||||||
sei();
|
|
||||||
}
|
|
||||||
|
|
||||||
void keyboard_slave_loop(void) {
|
|
||||||
matrix_init();
|
|
||||||
|
|
||||||
while (1) {
|
|
||||||
matrix_slave_scan();
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
// this code runs before the usb and keyboard is initialized
|
|
||||||
void matrix_setup(void) {
|
|
||||||
split_keyboard_setup();
|
|
||||||
|
|
||||||
if (!has_usb()) {
|
|
||||||
keyboard_slave_loop();
|
|
||||||
}
|
|
||||||
}
|
|
||||||
@ -1,20 +0,0 @@
|
|||||||
#ifndef SPLIT_KEYBOARD_UTIL_H
|
|
||||||
#define SPLIT_KEYBOARD_UTIL_H
|
|
||||||
|
|
||||||
#include <stdbool.h>
|
|
||||||
#include "eeconfig.h"
|
|
||||||
|
|
||||||
#define SLAVE_I2C_ADDRESS 0x32
|
|
||||||
|
|
||||||
extern volatile bool isLeftHand;
|
|
||||||
|
|
||||||
// slave version of matix scan, defined in matrix.c
|
|
||||||
void matrix_slave_scan(void);
|
|
||||||
|
|
||||||
void split_keyboard_setup(void);
|
|
||||||
bool has_usb(void);
|
|
||||||
void keyboard_slave_loop(void);
|
|
||||||
|
|
||||||
void matrix_master_OLED_init (void);
|
|
||||||
|
|
||||||
#endif
|
|
||||||
Loading…
Reference in New Issue
Block a user