Merge branch 'master' of https://github.com/jackhumbert/qmk_firmware
This commit is contained in:
Christopher Browne
commit
a6e109caa1
2
.gitattributes
vendored
2
.gitattributes
vendored
@ -1,2 +0,0 @@
|
|||||||
* text=auto
|
|
||||||
*.hex -diff
|
|
||||||
10
README.md
10
README.md
@ -38,13 +38,13 @@ You have access to a bunch of goodies! Check out the Makefile to enable/disable
|
|||||||
|
|
||||||
### Customizing Makefile options on a per-keymap basis
|
### Customizing Makefile options on a per-keymap basis
|
||||||
|
|
||||||
If your keymap directory has a file called `makefile.mk` (note the lowercase filename, and the `.mk` extension), any Makefile options you set in that file will take precedence over other Makefile options (those set for Quantum as a whole or for your particular keyboard).
|
If your keymap directory has a file called `Makefile` (note the filename), any Makefile options you set in that file will take precedence over other Makefile options (those set for Quantum as a whole or for your particular keyboard).
|
||||||
|
|
||||||
So let's say your keyboard's makefile has `CONSOLE_ENABLE = yes` (or maybe doesn't even list the `CONSOLE_ENABLE` option, which would cause it to revert to the global Quantum default). You want your particular keymap to not have the debug console, so you make a file called `makefile.mk` and specify `CONSOLE_ENABLE = no`.
|
So let's say your keyboard's makefile has `CONSOLE_ENABLE = yes` (or maybe doesn't even list the `CONSOLE_ENABLE` option, which would cause it to revert to the global Quantum default). You want your particular keymap to not have the debug console, so you make a file called `Makefile` and specify `CONSOLE_ENABLE = no`.
|
||||||
|
|
||||||
### Customizing config.h on a per-keymap basis
|
### Customizing config.h on a per-keymap basis
|
||||||
|
|
||||||
If you use the ErgoDox EZ, you can make a `config_user.h` file in your keymap directory and use it to override any `config.h` settings you don't like. Anything you set there will take precedence over the global `config.h` for the ErgoDox EZ. To see an example of this, check out `keymaps/erez_experimental`.
|
You can also make a `config.h` file in your keymap directory and use it to override any `config.h` settings you don't like. Anything you set there will take precedence over the global `config.h` for the ErgoDox EZ. To see an example of this, check out `keymaps/erez_experimental`.
|
||||||
|
|
||||||
## Quick aliases to common actions
|
## Quick aliases to common actions
|
||||||
|
|
||||||
@ -134,12 +134,12 @@ Steve Losh [described](http://stevelosh.com/blog/2012/10/a-modern-space-cadet/)
|
|||||||
|
|
||||||
To use it, use `KC_LSPO` (Left Shift, Parens Open) for your left Shift on your keymap, and `KC_RSPC` (Right Shift, Parens Close) for your right Shift.
|
To use it, use `KC_LSPO` (Left Shift, Parens Open) for your left Shift on your keymap, and `KC_RSPC` (Right Shift, Parens Close) for your right Shift.
|
||||||
|
|
||||||
It's defaulted to work on US keyboards, but if your layout uses different keys for parenthesis, you can define those in your keymap like this:
|
It's defaulted to work on US keyboards, but if your layout uses different keys for parenthesis, you can define those in your `config.h` like this:
|
||||||
|
|
||||||
#define LSPO_KEY KC_9
|
#define LSPO_KEY KC_9
|
||||||
#define RSPC_KEY KC_0
|
#define RSPC_KEY KC_0
|
||||||
|
|
||||||
The only other thing you're going to want to do is create a `makefile.mk` in your keymap directory and set the following:
|
The only other thing you're going to want to do is create a `Makefile` in your keymap directory and set the following:
|
||||||
|
|
||||||
```
|
```
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
|
|||||||
@ -29,7 +29,7 @@ You can also try these instructions:
|
|||||||
### Linux
|
### Linux
|
||||||
Install AVR GCC, AVR libc, and dfu-progammer with your favorite package manager.
|
Install AVR GCC, AVR libc, and dfu-progammer with your favorite package manager.
|
||||||
|
|
||||||
Debian/Ubuntu example:
|
Debian/Ubuntu example:
|
||||||
|
|
||||||
sudo apt-get update
|
sudo apt-get update
|
||||||
sudo apt-get install gcc-avr avr-libc dfu-programmer
|
sudo apt-get install gcc-avr avr-libc dfu-programmer
|
||||||
@ -38,8 +38,8 @@ Debian/Ubuntu example:
|
|||||||
If you have any problems building the firmware, you can try using a tool called Vagrant. It will set up a virtual computer with a known configuration that's ready-to-go for firmware building. OLKB does NOT host the files for this virtual computer. Details on how to set up Vagrant are in the [VAGRANT_GUIDE file](VAGRANT_GUIDE.md).
|
If you have any problems building the firmware, you can try using a tool called Vagrant. It will set up a virtual computer with a known configuration that's ready-to-go for firmware building. OLKB does NOT host the files for this virtual computer. Details on how to set up Vagrant are in the [VAGRANT_GUIDE file](VAGRANT_GUIDE.md).
|
||||||
|
|
||||||
## Verify Your Installation
|
## Verify Your Installation
|
||||||
1. If you haven't already, obtain this repository ([https://github.com/jackhumbert/qmk_firmware](https://github.com/jackhumbert/qmk_firmware)). You can either download it as a zip file and extract it, or clone it using the command line tool git or the Github Desktop application.
|
1. If you haven't already, obtain this repository ([https://github.com/jackhumbert/qmk_firmware](https://github.com/jackhumbert/qmk_firmware)). You can either download it as a zip file and extract it, or clone it using the command line tool git or the Github Desktop application.
|
||||||
2. Open up a terminal or command prompt and navigate to the `qmk_firmware` folder using the `cd` command. The command prompt will typically open to your home directory. If, for example, you cloned the repository to your Documents folder, then you would type `cd Documents/qmk_firmware`. If you extracted the file from a zip, then it may be named `qmk_firmware-master` instead.
|
2. Open up a terminal or command prompt and navigate to the `qmk_firmware` folder using the `cd` command. The command prompt will typically open to your home directory. If, for example, you cloned the repository to your Documents folder, then you would type `cd Documents/qmk_firmware`. If you extracted the file from a zip, then it may be named `qmk_firmware-master` instead.
|
||||||
3. To confirm that you're in the correct location, you can display the contents of your current folder using the `dir` command on Windows, or the `ls` command on Linux or Mac. You should see several files, including `README.md` and a `quantum` folder. From here, you need to navigate to the appropriate folder under `keyboard/`. For example, if you're building for a Planck, run `cd keyboard/planck`.
|
3. To confirm that you're in the correct location, you can display the contents of your current folder using the `dir` command on Windows, or the `ls` command on Linux or Mac. You should see several files, including `README.md` and a `quantum` folder. From here, you need to navigate to the appropriate folder under `keyboard/`. For example, if you're building for a Planck, run `cd keyboard/planck`.
|
||||||
4. Once you're in the correct keyboard-specific folder, run the `make` command. This should output a lot of information about the build process. More information about the `make` command can be found below.
|
4. Once you're in the correct keyboard-specific folder, run the `make` command. This should output a lot of information about the build process. More information about the `make` command can be found below.
|
||||||
|
|
||||||
@ -48,20 +48,20 @@ If you have any problems building the firmware, you can try using a tool called
|
|||||||
### The Make command
|
### The Make command
|
||||||
|
|
||||||
The `make` command is how you compile the firmware into a .hex file, which can be loaded by a dfu programmer (like dfu-progammer via `make dfu`) or the [Teensy loader](https://www.pjrc.com/teensy/loader.html) (only used with Teensys). You can run `make` from the root (`/`), your keyboard folder (`/keyboard/<keyboard>/`), or your keymap folder (`/keyboard/<keyboard>/keymaps/<keymap>/`) if you have a `Makefile` there (see the example [here](/doc/keymap_makefile_example.mk)).
|
The `make` command is how you compile the firmware into a .hex file, which can be loaded by a dfu programmer (like dfu-progammer via `make dfu`) or the [Teensy loader](https://www.pjrc.com/teensy/loader.html) (only used with Teensys). You can run `make` from the root (`/`), your keyboard folder (`/keyboard/<keyboard>/`), or your keymap folder (`/keyboard/<keyboard>/keymaps/<keymap>/`) if you have a `Makefile` there (see the example [here](/doc/keymap_makefile_example.mk)).
|
||||||
|
|
||||||
By default, this will generate a <keyboard>_<keymap>.hex file in whichever folder you run make from. These files are ignored by git, so don't worry about deleting them when committing/creating pull requests. You .hex file will also be copied into your keymap folder as `compiled.hex`, which isn't ignore by git - this is included in case first-time users are having trouble compiling, and just want to flash a layout via `make dfu-no-build`.
|
By default, this will generate a `<keyboard>_<keymap>.hex` file in whichever folder you run `make` from. These files are ignored by git, so don't worry about deleting them when committing/creating pull requests. Your .hex file will also be copied into your keymap folder as `compiled.hex`, which isn't ignored by git - this is included in case first-time users are having trouble compiling, and just want to flash a layout via `make dfu-no-build` or using the Teensy loader.
|
||||||
|
|
||||||
* The "root" (`/`) folder is the qmk_firmware folder, in which are `doc`, `keyboard`, `quantum`, etc.
|
* The "root" (`/`) folder is the qmk_firmware folder, in which are `doc`, `keyboard`, `quantum`, etc.
|
||||||
* The "keyboard" folder is any keyboard project's folder, like `/keyboard/<keyboard>`
|
* The "keyboard" folder is any keyboard project's folder, like `/keyboard/planck`.
|
||||||
* The "keymap" folder is any keymap's folder, like `/keyboard/<keyboard>/keymaps/<keymap>/`
|
* The "keymap" folder is any keymap's folder, like `/keyboard/planck/keymaps/default`.
|
||||||
|
|
||||||
Below is a list of the useful `make` commands in QMK:
|
Below is a list of the useful `make` commands in QMK:
|
||||||
|
|
||||||
* `make` - cleans automatically and builds your keyboard and keymap depending on which folder you're in. This defaults to the "default" layout (unless in a keymap folder), and Planck keyboard in the root folder
|
* `make` - cleans automatically and builds your keyboard and keymap depending on which folder you're in. This defaults to the "default" layout (unless in a keymap folder), and Planck keyboard in the root folder
|
||||||
* `make keyboard=<keyboard>` - specifies the keyboard (only to be used in root)
|
* `make keyboard=<keyboard>` - specifies the keyboard (only to be used in root)
|
||||||
* `make keymap=<keymap>` - specifies the keymap (only to be used in root and keyboard folder - not needed when in keymap folder)
|
* `make keymap=<keymap>` - specifies the keymap (only to be used in root and keyboard folder - not needed when in keymap folder)
|
||||||
* `make quick` - skips the clean step (only use when modifying .c code in the same project - at least one `make` is required)
|
* `make quick` - skips the clean step (cannot be used immediately after modifying config.h or Makefiles)
|
||||||
* `make dfu` - (requires dfu-programmer) builds and flashes the keymap to your keyboard once placed in reset/dfu mode (button or press KC_RESET).
|
* `make dfu` - (requires dfu-programmer) builds and flashes the keymap to your keyboard once placed in reset/dfu mode (button or press `KC_RESET`). This does not work for Teensy-based keyboards like the ErgoDox EZ.
|
||||||
* `keyboard=` and `keymap=` are compatible with this
|
* `keyboard=` and `keymap=` are compatible with this
|
||||||
* `make dfu-no-build` - (requires dfu-programmer) same as `make dfu`, but doesn't build and uses the included `compiled.hex` to flash the keyboard
|
* `make dfu-no-build` - (requires dfu-programmer) same as `make dfu`, but doesn't build and uses the included `compiled.hex` to flash the keyboard
|
||||||
* `make all-keyboards` - builds all keymaps for all keyboards and outputs status of each (use in root)
|
* `make all-keyboards` - builds all keymaps for all keyboards and outputs status of each (use in root)
|
||||||
@ -77,13 +77,13 @@ Other, less useful functionality:
|
|||||||
|
|
||||||
### The Makefile
|
### The Makefile
|
||||||
|
|
||||||
There are 3 different `make` and `Makefile` locations:
|
There are 3 different `make` and `Makefile` locations:
|
||||||
|
|
||||||
* root (`/`)
|
* root (`/`)
|
||||||
* keyboard (`/keyboard/<keyboard>/`)
|
* keyboard (`/keyboard/<keyboard>/`)
|
||||||
* keymap (`/keyboard/<keyboard>/keymaps/<keymap>/`)
|
* keymap (`/keyboard/<keyboard>/keymaps/<keymap>/`)
|
||||||
|
|
||||||
The root contains all of the automatic keymap/keyboard stuff, is static, and shouldn't be modified. The keyboard one will contain the MCU set-up and default settings for your keyboard, and shouldn't be modified unless you are the producer of that keyboard. The keymap Makefile can be modified by users, and is optional. It is included automatically if it exists. You can see an example [here](/doc/keymap_makefile_example.mk) - the last few lines are the most important. The settings you set here will override any defaults set in the keyboard Makefile. It is required if you want to run `make` in the keymap folder.
|
The root contains the code used to automatically figure out which keymap or keymaps to compile based on your current directory and commandline arguments. It's considered stable, and shouldn't be modified. The keyboard one will contain the MCU set-up and default settings for your keyboard, and shouldn't be modified unless you are the producer of that keyboard. The keymap Makefile can be modified by users, and is optional. It is included automatically if it exists. You can see an example [here](/doc/keymap_makefile_example.mk) - the last few lines are the most important. The settings you set here will override any defaults set in the keyboard Makefile. **It is required if you want to run `make` in the keymap folder.**
|
||||||
|
|
||||||
### The `config.h` file
|
### The `config.h` file
|
||||||
|
|
||||||
@ -92,16 +92,13 @@ There are 2 `config.h` locations:
|
|||||||
* keyboard (`/keyboard/<keyboard>/`)
|
* keyboard (`/keyboard/<keyboard>/`)
|
||||||
* keymap (`/keyboard/<keyboard>/keymaps/<keymap>/`)
|
* keymap (`/keyboard/<keyboard>/keymaps/<keymap>/`)
|
||||||
|
|
||||||
The keyboard `config.h` is included only if the keymap one doesn't exist. It's possible to included both by using this code at the top of your keymap's `config.h`:
|
The keyboard `config.h` is included only if the keymap one doesn't exist. The format to use for your custom one [is here](/doc/keymap_config_h_example.h). If you want to override a setting from the parent `config.h` file, you need to do this:
|
||||||
|
|
||||||
#include "../../config.h"
|
```
|
||||||
|
#undef MY_SETTING
|
||||||
You can then overwrite any settings, rather than having to copy and paste the whole thing. You may need to `undefine` things to prevent warnings.
|
#define MY_SETTING 4
|
||||||
|
```c
|
||||||
|
|
||||||
|
For a value of `4` for this imaginary setting. So we `undef` it first, then `define` it.
|
||||||
|
|
||||||
## Helpful Tips
|
You can then override any settings, rather than having to copy and paste the whole thing.
|
||||||
1. On Linux or OS X, you can run `sleep 5; make keymap=<keymap> dfu` to delay building/deploying the firmware until for 5 seconds, giving you a chance to put the firmware into bootloader mode. You can change the 5 to any number of seconds.
|
|
||||||
|
|
||||||
## Troubleshooting
|
|
||||||
|
|
||||||
WIP
|
|
||||||
|
|||||||
8
doc/keymap_config_h_example.h
Normal file
8
doc/keymap_config_h_example.h
Normal file
@ -0,0 +1,8 @@
|
|||||||
|
#ifndef CONFIG_USER_H
|
||||||
|
#define CONFIG_USER_H
|
||||||
|
|
||||||
|
#include "../../config.h"
|
||||||
|
|
||||||
|
// place overrides here
|
||||||
|
|
||||||
|
#endif
|
||||||
@ -1,5 +1,5 @@
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -1,42 +1,4 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Target file name (without extension).
|
# Target file name (without extension).
|
||||||
|
|
||||||
|
|||||||
@ -1,42 +1,4 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# MCU name
|
# MCU name
|
||||||
#MCU = at90usb1287
|
#MCU = at90usb1287
|
||||||
|
|||||||
@ -1,42 +1,4 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# MCU name
|
# MCU name
|
||||||
#MCU = at90usb1287
|
#MCU = at90usb1287
|
||||||
@ -87,7 +49,7 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
|||||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -1,42 +1,4 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
ifdef TEENSY2
|
ifdef TEENSY2
|
||||||
OPT_DEFS += -DATREUS_TEENSY2
|
OPT_DEFS += -DATREUS_TEENSY2
|
||||||
|
|||||||
@ -1,42 +1,4 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# MCU name
|
# MCU name
|
||||||
#MCU = at90usb1287
|
#MCU = at90usb1287
|
||||||
|
|||||||
@ -1,42 +1,4 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# # project specific files
|
# # project specific files
|
||||||
SRC = led.c
|
SRC = led.c
|
||||||
|
|||||||
@ -1,42 +1,4 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
SRC = led.c
|
SRC = led.c
|
||||||
|
|
||||||
|
|||||||
@ -1,45 +1,7 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||||
|
|||||||
@ -1,42 +1,4 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# # project specific files
|
# # project specific files
|
||||||
SRC = backlight.c
|
SRC = backlight.c
|
||||||
|
|||||||
@ -70,17 +70,17 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
|
|||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||||
# CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||||
CUSTOM_MATRIX ?= yes # Custom matrix file for the ErgoDox EZ
|
CUSTOM_MATRIX ?= yes # Custom matrix file for the ErgoDox EZ
|
||||||
SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
# MIDI_ENABLE ?= yes # MIDI controls
|
MIDI_ENABLE ?= no # MIDI controls
|
||||||
# UNICODE_ENABLE ?= yes # Unicode
|
UNICODE_ENABLE ?= yes # Unicode
|
||||||
|
|
||||||
ifndef QUANTUM_DIR
|
ifndef QUANTUM_DIR
|
||||||
include ../../Makefile
|
include ../../Makefile
|
||||||
endif
|
endif
|
||||||
|
|||||||
Binary file not shown.
@ -53,7 +53,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|||||||
/* Keymap 1: Symbol Layer
|
/* Keymap 1: Symbol Layer
|
||||||
*
|
*
|
||||||
* ,--------------------------------------------------. ,--------------------------------------------------.
|
* ,--------------------------------------------------. ,--------------------------------------------------.
|
||||||
* | | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 |
|
* |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 |
|
||||||
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
|
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
|
||||||
* | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 |
|
* | | ! | @ | { | } | | | | | | Up | 7 | 8 | 9 | * | F12 |
|
||||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||||
@ -74,7 +74,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|||||||
// SYMBOLS
|
// SYMBOLS
|
||||||
[SYMB] = KEYMAP(
|
[SYMB] = KEYMAP(
|
||||||
// left hand
|
// left hand
|
||||||
KC_TRNS,KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS,
|
M(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS,
|
||||||
KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS,
|
KC_TRNS,KC_EXLM,KC_AT, KC_LCBR,KC_RCBR,KC_PIPE,KC_TRNS,
|
||||||
KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV,
|
KC_TRNS,KC_HASH,KC_DLR, KC_LPRN,KC_RPRN,KC_GRV,
|
||||||
KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS,
|
KC_TRNS,KC_PERC,KC_CIRC,KC_LBRC,KC_RBRC,KC_TILD,KC_TRNS,
|
||||||
@ -145,9 +145,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
|||||||
switch(id) {
|
switch(id) {
|
||||||
case 0:
|
case 0:
|
||||||
if (record->event.pressed) {
|
if (record->event.pressed) {
|
||||||
register_code(KC_RSFT);
|
SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
|
||||||
} else {
|
|
||||||
unregister_code(KC_RSFT);
|
|
||||||
}
|
}
|
||||||
break;
|
break;
|
||||||
}
|
}
|
||||||
|
|||||||
@ -3,3 +3,7 @@
|
|||||||
|
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
|
|
||||||
|
ifndef QUANTUM_DIR
|
||||||
|
include ../../../../Makefile
|
||||||
|
endif
|
||||||
Binary file not shown.
@ -1,8 +1,9 @@
|
|||||||
#ifndef CONFIG_USER_H
|
#ifndef CONFIG_USER_H
|
||||||
#define CONFIG_USER_H
|
#define CONFIG_USER_H
|
||||||
|
|
||||||
#include "config.h"
|
#include "../../config.h"
|
||||||
|
|
||||||
#define ONESHOT_TAP_TOGGLE 2
|
#define ONESHOT_TAP_TOGGLE 2
|
||||||
#define ONESHOT_TIMEOUT 3000
|
#define ONESHOT_TIMEOUT 300
|
||||||
|
|
||||||
#endif
|
#endif
|
||||||
@ -1,42 +1,4 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# MCU name
|
# MCU name
|
||||||
#MCU = at90usb1287
|
#MCU = at90usb1287
|
||||||
|
|||||||
@ -1,42 +1,4 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# project specific files
|
# project specific files
|
||||||
SRC = matrix.c
|
SRC = matrix.c
|
||||||
|
|||||||
@ -1,42 +1,4 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# # project specific files
|
# # project specific files
|
||||||
SRC = backlight.c
|
SRC = backlight.c
|
||||||
|
|||||||
@ -1,42 +1,4 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# MCU name
|
# MCU name
|
||||||
#MCU = at90usb1287
|
#MCU = at90usb1287
|
||||||
@ -111,3 +73,4 @@ AUDIO_ENABLE ?= no # Audio output on port C6
|
|||||||
ifndef QUANTUM_DIR
|
ifndef QUANTUM_DIR
|
||||||
include ../../Makefile
|
include ../../Makefile
|
||||||
endif
|
endif
|
||||||
|
|
||||||
|
|||||||
@ -45,7 +45,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||||||
|
|
||||||
// Possible pins for columns include: F1 F0 E6 D7 D6 D4 C7 C6 B7 B5 B4 B3 B1 B0
|
// Possible pins for columns include: F1 F0 E6 D7 D6 D4 C7 C6 B7 B5 B4 B3 B1 B0
|
||||||
// Pins for rows include: D0 D1 F6 F7 D5
|
// Pins for rows include: D0 D1 F6 F7 D5
|
||||||
// KC60 Version 2
|
// KC60 Version 2
|
||||||
#define MATRIX_ROW_PINS { D0, D1, F6, F7, D5 }
|
#define MATRIX_ROW_PINS { D0, D1, F6, F7, D5 }
|
||||||
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3 }
|
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3 }
|
||||||
#define UNUSED_PINS
|
#define UNUSED_PINS
|
||||||
|
|||||||
@ -62,7 +62,7 @@ void backlight_init_ports()
|
|||||||
DDRB |= (1<<6);
|
DDRB |= (1<<6);
|
||||||
PORTB &= ~(1<<6);
|
PORTB &= ~(1<<6);
|
||||||
|
|
||||||
// Use full 16-bit resolution.
|
// Use full 16-bit resolution.
|
||||||
ICR1 = 0xFFFF;
|
ICR1 = 0xFFFF;
|
||||||
|
|
||||||
// I could write a wall of text here to explain... but TL;DW
|
// I could write a wall of text here to explain... but TL;DW
|
||||||
@ -99,7 +99,7 @@ void backlight_set(uint8_t level)
|
|||||||
// Set the brightness
|
// Set the brightness
|
||||||
CHANNEL = 0xFFFF;
|
CHANNEL = 0xFFFF;
|
||||||
}
|
}
|
||||||
else
|
else
|
||||||
{
|
{
|
||||||
// Turn on PWM control of PB6
|
// Turn on PWM control of PB6
|
||||||
TCCR1A |= _BV(COM1B1);
|
TCCR1A |= _BV(COM1B1);
|
||||||
|
|||||||
Binary file not shown.
25
keyboard/kc60/keymaps/stanleylai/Makefile
Normal file
25
keyboard/kc60/keymaps/stanleylai/Makefile
Normal file
@ -0,0 +1,25 @@
|
|||||||
|
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# change yes to no to disable
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE ?= no # Commands for debug and configuration
|
||||||
|
KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
|
||||||
|
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||||
|
RGBLIGHT_ENABLE ?= yes # Enable WS2812 underglow RGB strip
|
||||||
|
MIDI_ENABLE ?= no # MIDI controls
|
||||||
|
UNICODE_ENABLE ?= no # Unicode
|
||||||
|
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||||
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
|
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||||
|
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
NKRO_ENABLE ?= yes # USB Nkey Rollover
|
||||||
|
|
||||||
|
ifndef QUANTUM_DIR
|
||||||
|
include ../../Makefile
|
||||||
|
endif
|
||||||
26
keyboard/kc60/keymaps/stanleylai/README.md
Normal file
26
keyboard/kc60/keymaps/stanleylai/README.md
Normal file
@ -0,0 +1,26 @@
|
|||||||
|
Stanley Lai's Split Right Shift with Dedicated Arrow Keys
|
||||||
|
======================
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
## Quantum MK Firmware
|
||||||
|
For the full Quantum feature list, see [the parent README.md](/README.md).
|
||||||
|
|
||||||
|
## Keymap Notes
|
||||||
|
- Keymap setup with split Right Shift in mind.
|
||||||
|
- Right-side modifiers are setup as dedicated arrow keys
|
||||||
|
|
||||||
|
### Base Layer Reference
|
||||||
|
- Fn Layer indicated on keycap front legends.
|
||||||
|
- Tapping Caps Lock key toggles Caps. Holding it down momentarily switches us to the Fn Layer.
|
||||||
|
- Holding down "Fn" and "Page Down" momentarily switches us to the RGB Layer. Tapping "Page Down" behaves as expected.
|
||||||
|
|
||||||
|
|
||||||
|
### RGB Layer Reference
|
||||||
|
|
||||||
|
|
||||||
|
## WS2812 Support
|
||||||
|
By default, it is now setup for 16 LEDs on the PF5 breakout pin. See [included image](../ws2812/ws2812_wiring.jpg) for wiring reference.
|
||||||
|
|
||||||
|
### Build
|
||||||
|
To build this keymap, simply run `make KEYMAP=stanleylai`.
|
||||||
BIN
keyboard/kc60/keymaps/stanleylai/base_layer.png
Normal file
BIN
keyboard/kc60/keymaps/stanleylai/base_layer.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 34 KiB |
BIN
keyboard/kc60/keymaps/stanleylai/compiled.hex
Normal file
BIN
keyboard/kc60/keymaps/stanleylai/compiled.hex
Normal file
Binary file not shown.
3
keyboard/kc60/keymaps/stanleylai/config.h
Normal file
3
keyboard/kc60/keymaps/stanleylai/config.h
Normal file
@ -0,0 +1,3 @@
|
|||||||
|
// Use configs from WS2812 enabled Keymap
|
||||||
|
|
||||||
|
#include "../ws2812/config.h"
|
||||||
151
keyboard/kc60/keymaps/stanleylai/keymap.c
Normal file
151
keyboard/kc60/keymaps/stanleylai/keymap.c
Normal file
@ -0,0 +1,151 @@
|
|||||||
|
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
|
||||||
|
// this is the style you want to emulate.
|
||||||
|
|
||||||
|
#include "kc60.h"
|
||||||
|
|
||||||
|
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||||
|
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||||
|
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||||
|
// entirely and just use numbers.
|
||||||
|
#define _BL 0
|
||||||
|
#define _FL 1
|
||||||
|
#define _RGBL 2
|
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
|
||||||
|
// See base_layer.png and rgb_layer.png for layout reference
|
||||||
|
|
||||||
|
// Base Default Layer
|
||||||
|
// Mac Modifier Layout. Use BootMagic to toggle GUI and ALT positions.
|
||||||
|
[_BL] = KEYMAP(
|
||||||
|
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
|
||||||
|
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
|
||||||
|
LT(_FL, KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_NO, KC_ENT, \
|
||||||
|
KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, MO(_FL), KC_UP, \
|
||||||
|
KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI,KC_LEFT, KC_DOWN, KC_RGHT),
|
||||||
|
|
||||||
|
// Function layer
|
||||||
|
[_FL] = KEYMAP(
|
||||||
|
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \
|
||||||
|
KC_NO, KC_MPRV,KC_UP, KC_MNXT,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PSCR,KC_SLCK, KC_PAUS, KC_INS, \
|
||||||
|
KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
|
||||||
|
KC_TRNS,KC_NO, KC_MUTE,KC_VOLD,KC_VOLU,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, LT(_RGBL, KC_PGUP),\
|
||||||
|
KC_TRNS,KC_TRNS,KC_TRNS, KC_MPLY, KC_TRNS,KC_HOME, KC_PGDN, KC_END),
|
||||||
|
|
||||||
|
// RGB Layer
|
||||||
|
[_RGBL] = KEYMAP(
|
||||||
|
#ifdef RGBLIGHT_ENABLE
|
||||||
|
RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
|
||||||
|
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
|
||||||
|
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
|
||||||
|
KC_TRNS,KC_NO, F(1), F(2), F(3), F(4), F(5), F(6), F(7), F(8), BL_STEP,BL_TOGG, KC_TRNS, KC_TRNS,\
|
||||||
|
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS),
|
||||||
|
#else
|
||||||
|
RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
|
||||||
|
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
|
||||||
|
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
|
||||||
|
KC_TRNS,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, BL_STEP,BL_TOGG, KC_TRNS, KC_TRNS,\
|
||||||
|
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS),
|
||||||
|
#endif
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
enum function_id {
|
||||||
|
SHIFT_ESC,
|
||||||
|
#ifdef RGBLIGHT_ENABLE
|
||||||
|
RGBLED_TOGGLE,
|
||||||
|
RGBLED_STEP_MODE,
|
||||||
|
RGBLED_INCREASE_HUE,
|
||||||
|
RGBLED_DECREASE_HUE,
|
||||||
|
RGBLED_INCREASE_SAT,
|
||||||
|
RGBLED_DECREASE_SAT,
|
||||||
|
RGBLED_INCREASE_VAL,
|
||||||
|
RGBLED_DECREASE_VAL,
|
||||||
|
#endif
|
||||||
|
};
|
||||||
|
|
||||||
|
const uint16_t PROGMEM fn_actions[] = {
|
||||||
|
[0] = ACTION_FUNCTION(SHIFT_ESC),
|
||||||
|
#ifdef RGBLIGHT_ENABLE
|
||||||
|
[1] = ACTION_FUNCTION(RGBLED_TOGGLE),
|
||||||
|
[2] = ACTION_FUNCTION(RGBLED_STEP_MODE),
|
||||||
|
[3] = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
|
||||||
|
[4] = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
|
||||||
|
[5] = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
|
||||||
|
[6] = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
|
||||||
|
[7] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
|
||||||
|
[8] = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
|
||||||
|
#endif
|
||||||
|
};
|
||||||
|
|
||||||
|
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
|
||||||
|
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||||
|
static uint8_t shift_esc_shift_mask;
|
||||||
|
switch (id) {
|
||||||
|
case SHIFT_ESC:
|
||||||
|
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
|
||||||
|
if (record->event.pressed) {
|
||||||
|
if (shift_esc_shift_mask) {
|
||||||
|
add_key(KC_GRV);
|
||||||
|
send_keyboard_report();
|
||||||
|
} else {
|
||||||
|
add_key(KC_ESC);
|
||||||
|
send_keyboard_report();
|
||||||
|
}
|
||||||
|
} else {
|
||||||
|
if (shift_esc_shift_mask) {
|
||||||
|
del_key(KC_GRV);
|
||||||
|
send_keyboard_report();
|
||||||
|
} else {
|
||||||
|
del_key(KC_ESC);
|
||||||
|
send_keyboard_report();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
|
||||||
|
#ifdef RGBLIGHT_ENABLE
|
||||||
|
|
||||||
|
case RGBLED_TOGGLE:
|
||||||
|
//led operations
|
||||||
|
if (record->event.pressed) {
|
||||||
|
rgblight_toggle();
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case RGBLED_INCREASE_HUE:
|
||||||
|
if (record->event.pressed) {
|
||||||
|
rgblight_increase_hue();
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case RGBLED_DECREASE_HUE:
|
||||||
|
if (record->event.pressed) {
|
||||||
|
rgblight_decrease_hue();
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case RGBLED_INCREASE_SAT:
|
||||||
|
if (record->event.pressed) {
|
||||||
|
rgblight_increase_sat();
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case RGBLED_DECREASE_SAT:
|
||||||
|
if (record->event.pressed) {
|
||||||
|
rgblight_decrease_sat();
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case RGBLED_INCREASE_VAL:
|
||||||
|
if (record->event.pressed) {
|
||||||
|
rgblight_increase_val();
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case RGBLED_DECREASE_VAL:
|
||||||
|
if (record->event.pressed) {
|
||||||
|
rgblight_decrease_val();
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
case RGBLED_STEP_MODE:
|
||||||
|
if (record->event.pressed) {
|
||||||
|
rgblight_step();
|
||||||
|
}
|
||||||
|
break;
|
||||||
|
#endif
|
||||||
|
}
|
||||||
|
}
|
||||||
BIN
keyboard/kc60/keymaps/stanleylai/rgb_layer.png
Normal file
BIN
keyboard/kc60/keymaps/stanleylai/rgb_layer.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 19 KiB |
@ -1,42 +1,4 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
|
|||||||
Binary file not shown.
@ -1,42 +1,4 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
SRC = led.c
|
SRC = led.c
|
||||||
|
|
||||||
|
|||||||
@ -1,42 +1,4 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# MCU name
|
# MCU name
|
||||||
#MCU = at90usb1287
|
#MCU = at90usb1287
|
||||||
@ -87,7 +49,7 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
|||||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -10,8 +10,8 @@ and contain the following files:
|
|||||||
|
|
||||||
* `keymap.c`
|
* `keymap.c`
|
||||||
* `readme.md` *recommended*
|
* `readme.md` *recommended*
|
||||||
* `config_user.h` *optional*, found automatically when compiling
|
* `config.h` *optional*, found automatically when compiling
|
||||||
* `makefile.mk` *optional*, found automatically when compling
|
* `Makefile` *optional*, found automatically when compling
|
||||||
|
|
||||||
When adding your keymap to this list, keep it organised alphabetically (select list, edit->sort lines), and use this format:
|
When adding your keymap to this list, keep it organised alphabetically (select list, edit->sort lines), and use this format:
|
||||||
|
|
||||||
|
|||||||
@ -1,45 +1,7 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -1,45 +1,7 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -1,45 +1,7 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -1,45 +1,7 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -1,45 +1,7 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -1,45 +1,7 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -1,45 +1,7 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -1,7 +1,15 @@
|
|||||||
|
#ifndef CONFIG_USER_H
|
||||||
|
#define CONFIG_USER_H
|
||||||
|
|
||||||
|
#include "../../config.h"
|
||||||
|
|
||||||
/* cbbrowne user configuration */
|
/* cbbrowne user configuration */
|
||||||
|
|
||||||
#define randadd 53
|
#define randadd 53
|
||||||
#define randmul 181
|
#define randmul 181
|
||||||
#define randmod 167
|
#define randmod 167
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
@ -2,7 +2,7 @@
|
|||||||
#ifdef BACKLIGHT_ENABLE
|
#ifdef BACKLIGHT_ENABLE
|
||||||
#include "backlight.h"
|
#include "backlight.h"
|
||||||
#endif
|
#endif
|
||||||
#include "config_user.h"
|
#include "config.h"
|
||||||
#include "quantum.h"
|
#include "quantum.h"
|
||||||
|
|
||||||
/* Each layer is given a name to aid in readability, which is then
|
/* Each layer is given a name to aid in readability, which is then
|
||||||
|
|||||||
@ -1,45 +1,7 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -1,45 +1,7 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -1,45 +1,7 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -1,45 +1,7 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -1,45 +1,7 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -1,45 +1,7 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -1,45 +1,7 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -1,45 +1,7 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -1,45 +1,7 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -1,45 +1,7 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -1,45 +1,7 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -1,45 +1,7 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -1,45 +1,7 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -1,45 +1,7 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -1,45 +1,7 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -1,45 +1,7 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -1,45 +1,7 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
AUDIO_ENABLE = no
|
AUDIO_ENABLE = no
|
||||||
|
|||||||
@ -1,44 +1,6 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -1,45 +1,7 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -1,45 +1,7 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
UNICODE_ENABLE = yes # Unicode
|
UNICODE_ENABLE = yes # Unicode
|
||||||
|
|||||||
@ -1,45 +1,5 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||||
|
|||||||
@ -1,42 +1,4 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# MCU name
|
# MCU name
|
||||||
#MCU = at90usb1287
|
#MCU = at90usb1287
|
||||||
@ -87,7 +49,7 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
|||||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -1,45 +1,7 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Build Options
|
# Build Options
|
||||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
|||||||
@ -1,42 +1,4 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# MCU name
|
# MCU name
|
||||||
#MCU = at90usb1287
|
#MCU = at90usb1287
|
||||||
|
|||||||
@ -1,42 +1,4 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
SRC = led.c
|
SRC = led.c
|
||||||
|
|
||||||
|
|||||||
@ -1,42 +1,4 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
SRC = matrix.c
|
SRC = matrix.c
|
||||||
|
|
||||||
|
|||||||
@ -154,7 +154,7 @@ enum quantum_keycodes {
|
|||||||
KC_LSPO,
|
KC_LSPO,
|
||||||
|
|
||||||
// Right shift, close paren
|
// Right shift, close paren
|
||||||
KC_RSPC,
|
KC_RSPC
|
||||||
};
|
};
|
||||||
|
|
||||||
// Ability to use mods in layouts
|
// Ability to use mods in layouts
|
||||||
|
|||||||
@ -504,14 +504,14 @@ bool process_record_quantum(keyrecord_t *record) {
|
|||||||
case KC_LSPO: {
|
case KC_LSPO: {
|
||||||
if (record->event.pressed) {
|
if (record->event.pressed) {
|
||||||
shift_interrupted[0] = false;
|
shift_interrupted[0] = false;
|
||||||
register_mods(MOD_LSFT);
|
register_mods(MOD_BIT(KC_LSFT));
|
||||||
}
|
}
|
||||||
else {
|
else {
|
||||||
if (!shift_interrupted[0]) {
|
if (!shift_interrupted[0]) {
|
||||||
register_code(LSPO_KEY);
|
register_code(LSPO_KEY);
|
||||||
unregister_code(LSPO_KEY);
|
unregister_code(LSPO_KEY);
|
||||||
}
|
}
|
||||||
unregister_mods(MOD_LSFT);
|
unregister_mods(MOD_BIT(KC_LSFT));
|
||||||
}
|
}
|
||||||
return false;
|
return false;
|
||||||
break;
|
break;
|
||||||
@ -520,14 +520,14 @@ bool process_record_quantum(keyrecord_t *record) {
|
|||||||
case KC_RSPC: {
|
case KC_RSPC: {
|
||||||
if (record->event.pressed) {
|
if (record->event.pressed) {
|
||||||
shift_interrupted[1] = false;
|
shift_interrupted[1] = false;
|
||||||
register_mods(MOD_RSFT);
|
register_mods(MOD_BIT(KC_RSFT));
|
||||||
}
|
}
|
||||||
else {
|
else {
|
||||||
if (!shift_interrupted[1]) {
|
if (!shift_interrupted[1]) {
|
||||||
register_code(RSPC_KEY);
|
register_code(RSPC_KEY);
|
||||||
unregister_code(RSPC_KEY);
|
unregister_code(RSPC_KEY);
|
||||||
}
|
}
|
||||||
unregister_mods(MOD_RSFT);
|
unregister_mods(MOD_BIT(KC_RSFT));
|
||||||
}
|
}
|
||||||
return false;
|
return false;
|
||||||
break;
|
break;
|
||||||
|
|||||||
@ -1,42 +1,4 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# MCU name
|
# MCU name
|
||||||
#MCU = at90usb1287
|
#MCU = at90usb1287
|
||||||
|
|||||||
@ -1,42 +1,4 @@
|
|||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# Target file name (without extension).
|
# Target file name (without extension).
|
||||||
TARGET = usb_hid_test
|
TARGET = usb_hid_test
|
||||||
|
|||||||
@ -14,45 +14,7 @@
|
|||||||
# Frederik Rouleau
|
# Frederik Rouleau
|
||||||
# Carlos Lamas
|
# Carlos Lamas
|
||||||
#
|
#
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
|
|
||||||
# Output format. (can be srec, ihex, binary)
|
# Output format. (can be srec, ihex, binary)
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user