diff --git a/keyboards/sentraq/number_pad/config.h b/keyboards/sentraq/number_pad/config.h
new file mode 100644
index 000000000..d52670c7d
--- /dev/null
+++ b/keyboards/sentraq/number_pad/config.h
@@ -0,0 +1,83 @@
+/*
+Copyright 2019 QMK Community
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0x0000
+#define DEVICE_VER 0x0001
+#define MANUFACTURER Sentraq
+#define PRODUCT Sentraq Number Pad
+#define DESCRIPTION RBG backlit number pad kit
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 4
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { F5, F0, B5, D6, D4 }
+#define MATRIX_COL_PINS { C7, D5, D1, D0 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */
+#define DIODE_DIRECTION COL2ROW
+
+#define BACKLIGHT_PIN B7
+// #define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+
+#define RGB_DI_PIN B0
+#ifdef RGB_DI_PIN
+ #define RGBLED_NUM 13
+ #define RGBLIGHT_HUE_STEP 8
+ #define RGBLIGHT_SAT_STEP 8
+ #define RGBLIGHT_VAL_STEP 8
+ #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+ #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+/*== all animations enable ==*/
+ #define RGBLIGHT_ANIMATIONS
+/*== or choose animations ==*/
+ #define RGBLIGHT_EFFECT_BREATHING
+ #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+ #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+ #define RGBLIGHT_EFFECT_SNAKE
+ #define RGBLIGHT_EFFECT_KNIGHT
+ #define RGBLIGHT_EFFECT_CHRISTMAS
+ #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+ #define RGBLIGHT_EFFECT_RGB_TEST
+ #define RGBLIGHT_EFFECT_ALTERNATING
+#endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
diff --git a/keyboards/sentraq/number_pad/info.json b/keyboards/sentraq/number_pad/info.json
new file mode 100644
index 000000000..1c6e3f53c
--- /dev/null
+++ b/keyboards/sentraq/number_pad/info.json
@@ -0,0 +1,29 @@
+{
+ "keyboard_name": "Sentraq Number Pad",
+ "maintainer": "qmk",
+ "url": "https://sentraq.com/collections/kits/products/number-pad-rgb-kit",
+ "width": 4,
+ "height": 5,
+ "layouts": {
+ "LAYOUT_numpad_5x4": {
+ "keycount": 17,
+ "layout": [
+ {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0},
+ {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1, "h":2},
+ {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2},
+ {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3, "h":2},
+ {"x":0, "y":4, "w":2}, {"x":2, "y":4}
+ ]
+ },
+ "LAYOUT_ortho_5x4": {
+ "keycount": 20,
+ "layout": [
+ {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0},
+ {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1},
+ {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2},
+ {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3},
+ {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}
+ ]
+ }
+ }
+}
diff --git a/keyboards/sentraq/number_pad/keymaps/default/keymap.c b/keyboards/sentraq/number_pad/keymaps/default/keymap.c
new file mode 100644
index 000000000..90c806a91
--- /dev/null
+++ b/keyboards/sentraq/number_pad/keymaps/default/keymap.c
@@ -0,0 +1,105 @@
+/* Copyright 2019 QMK Community
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+#include QMK_KEYBOARD_H
+
+#define _BL 0
+#define _FN 1
+
+// Defines the keycodes used by our macros in process_record_user.
+// Disabled as it isn't used in this keymap, but available for modification.
+// enum custom_keycodes {
+// QMKBEST = SAFE_RANGE,
+// QMKURL
+// };
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ [_BL] = LAYOUT_numpad_5x4(
+ /* Base Layer: Number Pad
+ * ,---------------.
+ * |FN | / | * | - |
+ * |---+---+---|---|
+ * | 7 | 8 | 9 | |
+ * |---+---+---| + |
+ * | 4 | 5 | 6 | |
+ * |---+---+---|---|
+ * | 1 | 2 | 3 | |
+ * |---+---+---|Ent|
+ * | 0 | . | |
+ * `---------------'
+ */
+ MO(_FN), KC_PSLS, KC_PAST, KC_PMNS, \
+ KC_P7, KC_P8, KC_P9, \
+ KC_P4, KC_P5, KC_P6, KC_PPLS, \
+ KC_P1, KC_P2, KC_P3, \
+ KC_P0, KC_PDOT, KC_PENT
+ ),
+ /* Function Layer: RGB Controls and Numlock
+ * ,---------------.
+ * |FN |TOG|M+ |M- | Mode
+ * |---+---+---|---|
+ * | |H- |H+ | | Hue
+ * |---+---+---| |
+ * | |S- |S+ | | Saturation
+ * |---+---+---|---|
+ * | |B- |B+ |NUM| Brightness
+ * |---+---+---| |
+ * | | |LCK|
+ * `---------------'
+ */
+ [_FN] = LAYOUT_numpad_5x4(
+ KC_TRNS, RGB_TOG, RGB_MOD, RGB_RMOD, \
+ KC_NO, RGB_HUD, RGB_HUI, \
+ KC_NO, RGB_SAD, RGB_SAI, KC_NO, \
+ KC_NO, RGB_VAD, RGB_VAI, \
+ KC_NO, KC_NO, KC_NLCK
+ ),
+};
+
+// Handles macros for keycodes defined above.
+// Disabled as it isn't used in this keymap, but available for modification.
+// bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+// switch (keycode) {
+// case QMKBEST:
+// if (record->event.pressed) {
+// // when keycode QMKBEST is pressed
+// SEND_STRING("QMK is the best thing ever!");
+// } else {
+// // when keycode QMKBEST is released
+// }
+// break;
+// case QMKURL:
+// if (record->event.pressed) {
+// // when keycode QMKURL is pressed
+// SEND_STRING("https://qmk.fm/" SS_TAP(X_ENTER));
+// } else {
+// // when keycode QMKURL is released
+// }
+// break;
+// }
+// return true;
+// }
+
+void matrix_init_user(void) {
+
+}
+
+void matrix_scan_user(void) {
+
+}
+
+void led_set_user(uint8_t usb_led) {
+
+}
diff --git a/keyboards/sentraq/number_pad/keymaps/default/readme.md b/keyboards/sentraq/number_pad/keymaps/default/readme.md
new file mode 100644
index 000000000..a2c0e7567
--- /dev/null
+++ b/keyboards/sentraq/number_pad/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for Sentraq Number Pad RGB DIY Kit
diff --git a/keyboards/sentraq/number_pad/number_pad.c b/keyboards/sentraq/number_pad/number_pad.c
new file mode 100644
index 000000000..8c39efac5
--- /dev/null
+++ b/keyboards/sentraq/number_pad/number_pad.c
@@ -0,0 +1,43 @@
+/* Copyright 2019 QMK Community
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+#include "number_pad.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+
+ return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+ led_set_user(usb_led);
+}
diff --git a/keyboards/sentraq/number_pad/number_pad.h b/keyboards/sentraq/number_pad/number_pad.h
new file mode 100644
index 000000000..05bcd527c
--- /dev/null
+++ b/keyboards/sentraq/number_pad/number_pad.h
@@ -0,0 +1,56 @@
+/* Copyright 2019 QMK Community
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+#pragma once
+
+#include "quantum.h"
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_numpad_5x4( \
+ K00, K01, K02, K03, \
+ K10, K11, K12, \
+ K20, K21, K22, K23, \
+ K30, K31, K32, \
+ K40, K42, K43 \
+) \
+{ \
+ { K00, K01, K02, K03 }, \
+ { K10, K11, K12, KC_NO }, \
+ { K20, K21, K22, K23 }, \
+ { K30, K31, K32, KC_NO }, \
+ { K40, KC_NO, K42, K43 } \
+}
+
+#define LAYOUT_ortho_5x4( \
+ K00, K01, K02, K03, \
+ K10, K11, K12, K13, \
+ K20, K21, K22, K23, \
+ K30, K31, K32, K33, \
+ K40, K41, K42, K43 \
+) \
+{ \
+ { K00, K01, K02, K03 }, \
+ { K10, K11, K12, K13 }, \
+ { K20, K21, K22, K23 }, \
+ { K30, K31, K32, K33 }, \
+ { K40, K41, K42, K43 } \
+}
diff --git a/keyboards/sentraq/number_pad/readme.md b/keyboards/sentraq/number_pad/readme.md
new file mode 100644
index 000000000..ce9bfe435
--- /dev/null
+++ b/keyboards/sentraq/number_pad/readme.md
@@ -0,0 +1,13 @@
+# Sentraq Number Pad RGB DIY Kit
+
+Sentraq Number Pad RGB DIY Kit.
+
+Keyboard Maintainer: QMK Community\
+Hardware Supported: Sentraq Number Pad PCB\
+Hardware Availability: [Sentraq](https://sentraq.com/collections/kits/products/number-pad-rgb-kit)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make sentraq/number_pad:default:dfu
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/sentraq/number_pad/rules.mk b/keyboards/sentraq/number_pad/rules.mk
new file mode 100644
index 000000000..8678b7f88
--- /dev/null
+++ b/keyboards/sentraq/number_pad/rules.mk
@@ -0,0 +1,80 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Bootloader selection
+# Teensy halfkay
+# Pro Micro caterina
+# Atmel DFU atmel-dfu
+# LUFA DFU lufa-dfu
+# QMK DFU qmk-dfu
+# atmega32a bootloadHID
+BOOTLOADER = atmel-dfu
+
+
+# If you don't know the bootloader type, then you can specify the
+# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
+# Teensy halfKay 512
+# Teensy++ halfKay 1024
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+# USBaspLoader 2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+# change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no # Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
+CONSOLE_ENABLE = yes # Console for debug(+400)
+COMMAND_ENABLE = yes # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = no # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
+MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE = no # Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no # Audio output on port C6
+FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)