adds handwire and onekey example

This commit is contained in:
Jack Humbert 2016-06-29 20:21:05 -04:00
parent 7db2ec1509
commit ba6fb23f07
8 changed files with 166 additions and 9 deletions

View File

@ -65,15 +65,6 @@ endif
KEYBOARD_PATH = $(TOP_DIR)/keyboards/$(KEYBOARD)
ifneq ("$(wildcard $(KEYBOARD_PATH)/$(KEYBOARD).c)","")
KEYBOARD_FILE = keyboards/$(KEYBOARD)/$(KEYBOARD).c
ifndef ARCH
include $(KEYBOARD_PATH)/Makefile
endif
else
$(error "$(KEYBOARD_PATH)/$(KEYBOARD).c" does not exist)
endif
ifdef sub
SUBPROJECT=$(sub)
endif
@ -81,6 +72,17 @@ ifdef subproject
SUBPROJECT=$(subproject)
endif
ifneq ("$(wildcard $(KEYBOARD_PATH)/$(KEYBOARD).c)","")
KEYBOARD_FILE = keyboards/$(KEYBOARD)/$(KEYBOARD).c
ifndef ARCH
ifneq ("$(wildcard $(KEYBOARD_PATH)/Makefile)","")
include $(KEYBOARD_PATH)/Makefile
endif
endif
else
$(error "$(KEYBOARD_PATH)/$(KEYBOARD).c" does not exist)
endif
ifdef SUBPROJECT_DEFAULT
SUBPROJECT?=$(SUBPROJECT_DEFAULT)
endif
@ -110,7 +112,13 @@ ifneq ("$(wildcard $(KEYMAP_PATH)/keymap.c)","")
KEYMAP_FILE = keyboards/$(KEYBOARD)/keymaps/$(KEYMAP)/keymap.c
-include $(KEYMAP_PATH)/Makefile
else
ifeq ("$(wildcard $(SUBPROJECT_PATH)/keymaps/$(KEYMAP)/keymap.c)","")
$(error "$(KEYMAP_PATH)/keymap.c" does not exist)
else
KEYMAP_PATH = $(SUBPROJECT_PATH)/keymaps/$(KEYMAP)
KEYMAP_FILE = keyboards/$(KEYBOARD)/$(SUBPROJECT)/keymaps/$(KEYMAP)/keymap.c
-include $(KEYMAP_PATH)/Makefile
endif
endif
ifdef SUBPROJECT

View File

@ -0,0 +1 @@
#include "handwired.h"

View File

@ -0,0 +1 @@
#include "quantum.h"

View File

@ -0,0 +1,65 @@
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
CONSOLE_ENABLE ?= yes # Console for debug(+400)
COMMAND_ENABLE ?= yes # Commands for debug and configuration
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
ifndef QUANTUM_DIR
include ../../../Makefile
endif

View File

@ -0,0 +1,75 @@
/*
Copyright 2015 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6464
#define DEVICE_VER 0x0001
#define MANUFACTURER none
#define PRODUCT onekey
#define DESCRIPTION test board for qmk
/* key matrix size */
#define MATRIX_ROWS 1
#define MATRIX_COLS 1
#define MATRIX_COL_PINS { B0 }
#define MATRIX_ROW_PINS { D0 }
#define UNUSED_PINS
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
#endif

View File

@ -0,0 +1,5 @@
#include "onekey.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
{ KC_A }
};

View File

@ -0,0 +1 @@
#include "onekey.h"

View File

@ -0,0 +1 @@
#include "quantum.h"