diff --git a/keyboards/reviung33/config.h b/keyboards/reviung33/config.h new file mode 100644 index 000000000..b65d1d7c3 --- /dev/null +++ b/keyboards/reviung33/config.h @@ -0,0 +1,137 @@ +/* +Copyright 2020 gtips + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x516D +#define DEVICE_VER 0x0001 +#define MANUFACTURER gtips +#define PRODUCT reviung33 + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 10 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { F4, F5, F6, F7} +#define MATRIX_COL_PINS { D4, C6, D7, E6, B4, B1, B3, B2, B6, B5 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +#define RGB_DI_PIN D3 +#ifdef RGB_DI_PIN +# define RGBLED_NUM 5 +# define RGBLIGHT_HUE_STEP 16 +# define RGBLIGHT_SAT_STEP 16 +# define RGBLIGHT_VAL_STEP 16 +# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +# define RGBLIGHT_ANIMATIONS +/*== or choose animations ==*/ +//# define RGBLIGHT_EFFECT_BREATHING +//# define RGBLIGHT_EFFECT_RAINBOW_MOOD +//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +//# define RGBLIGHT_EFFECT_SNAKE +//# define RGBLIGHT_EFFECT_KNIGHT +//# define RGBLIGHT_EFFECT_CHRISTMAS +//# define RGBLIGHT_EFFECT_STATIC_GRADIENT +//# define RGBLIGHT_EFFECT_RGB_TEST +//# define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/reviung33/info.json b/keyboards/reviung33/info.json new file mode 100644 index 000000000..559c2e014 --- /dev/null +++ b/keyboards/reviung33/info.json @@ -0,0 +1,49 @@ +{ + "keyboard_name": "reviung33", + "url": "", + "maintainer": "gtips", + "width": 3, + "height": 2, + "layouts": { + "LAYOUT_reviung33": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + + {"x":0, "y":1}, + {"x":1, "y":1}, + {"x":2, "y":1}, + {"x":3, "y":1}, + {"x":4, "y":1}, + {"x":5, "y":1}, + {"x":6, "y":1}, + {"x":7, "y":1}, + {"x":8, "y":1}, + {"x":9, "y":1}, + + {"x":0, "y":2}, + {"x":1, "y":2}, + {"x":2, "y":2}, + {"x":3, "y":2}, + {"x":4, "y":2}, + {"x":5, "y":2}, + {"x":6, "y":2}, + {"x":7, "y":2}, + {"x":8, "y":2}, + {"x":9, "y":2}, + + {"x":0, "y":3}, + {"x":2, "y":3, "w":6}, + {"x":9, "y":3} + ] + } + } +} diff --git a/keyboards/reviung33/keymaps/default/keymap.c b/keyboards/reviung33/keymaps/default/keymap.c new file mode 100644 index 000000000..875df9760 --- /dev/null +++ b/keyboards/reviung33/keymaps/default/keymap.c @@ -0,0 +1,71 @@ +/* Copyright 2020 gtips + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _LOWER, + _RAISE, + _ADJUST +}; + +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) + +#define CT_Q LCTL_T(KC_Q) +#define CT_CM RCTL_T(KC_COMM) +#define SF_Z LSFT_T(KC_Z) +#define SF_SS RSFT_T(KC_SLSH) +#define AL_X LALT_T(KC_X) +#define AL_DT RALT_T(KC_DOT) +#define TB_LO LT(LOWER, KC_TAB) +#define BS_RA LT(RAISE, KC_BSPC) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_reviung33( + CT_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT, + SF_Z, AL_X, KC_C, KC_V, KC_B, KC_N, KC_M, CT_CM, AL_DT, SF_SS, + TB_LO, KC_SPC, BS_RA + ), + + [_LOWER] = LAYOUT_reviung33( + KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, + KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_SCLN, + KC_LSFT, KC_ESC, KC_LGUI, KC_LALT, KC_QUOT, KC_HOME, KC_END, KC_PGUP, KC_PGDN, KC_RSFT, + _______, _______, _______ + ), + + [_RAISE] = LAYOUT_reviung33( + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, + KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, XXXXXXX, XXXXXXX, KC_GRV, KC_TILD, KC_COLN, + KC_LSFT, KC_ESC, KC_RGUI, KC_LALT, KC_DQUO, KC_TAB, KC_RALT, KC_RCTL, KC_RALT, KC_RSFT, + _______, KC_DEL, _______ + ), + + [_ADJUST] = LAYOUT_reviung33( + RGB_VAI, RGB_SAI, RGB_HUI, RGB_MOD, RGB_TOG, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, + RGB_VAD, RGB_SAD, RGB_HUD, RGB_RMOD,XXXXXXX, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET, KC_F11, KC_F12, KC_CAPS, XXXXXXX, KC_PSCR, + _______, _______, _______ + ), +}; + +layer_state_t layer_state_set_user(layer_state_t state) { + return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); +} + diff --git a/keyboards/reviung33/keymaps/default/readme.md b/keyboards/reviung33/keymaps/default/readme.md new file mode 100644 index 000000000..9121b1429 --- /dev/null +++ b/keyboards/reviung33/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for reviung33 diff --git a/keyboards/reviung33/keymaps/default_jp/keymap.c b/keyboards/reviung33/keymaps/default_jp/keymap.c new file mode 100644 index 000000000..1265a301e --- /dev/null +++ b/keyboards/reviung33/keymaps/default_jp/keymap.c @@ -0,0 +1,70 @@ +/* Copyright 2020 gtips + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H +#include "keymap_jp.h" + +enum layer_names { + _BASE, + _LOWER, + _RAISE, + _ADJUST +}; + +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) + +#define CT_Q LCTL_T(JP_Q) +#define CT_CM RCTL_T(JP_COMM) +#define SF_Z LSFT_T(JP_Z) +#define SF_SS RSFT_T(JP_SLSH) +#define AL_X LALT_T(JP_X) +#define AL_DT RALT_T(JP_DOT) +#define TB_LO LT(LOWER, KC_TAB) +#define BS_RA LT(RAISE, KC_BSPC) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_reviung33( + CT_Q, JP_W, JP_E, JP_R, JP_T, JP_Y, JP_U, JP_I, JP_O, JP_P, + JP_A, JP_S, JP_D, JP_F, JP_G, JP_H, JP_J, JP_K, JP_L, KC_ENT, + SF_Z, AL_X, JP_C, JP_V, JP_B, JP_N, JP_M, CT_CM, AL_DT, SF_SS, + TB_LO, KC_SPC, BS_RA + ), + + [_LOWER] = LAYOUT_reviung33( + JP_EXLM, JP_AT, JP_HASH, JP_DLR, JP_PERC, JP_CIRC, JP_AMPR, JP_ASTR, JP_LPRN, JP_RPRN, + JP_UNDS, JP_PLUS, JP_LCBR, JP_RCBR, JP_PIPE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, JP_SCLN, + KC_LSFT, KC_ESC, KC_LGUI, KC_LALT, JP_QUOT, KC_HOME, KC_END, KC_PGUP, KC_PGDN, KC_RSFT, + _______, _______, _______ + ), + + [_RAISE] = LAYOUT_reviung33( + JP_1, JP_2, JP_3, JP_4, JP_5, JP_6, JP_7, JP_8, JP_9, JP_0, + JP_MINS, JP_EQL, JP_LBRC, JP_RBRC, JP_YEN, KC_RO, XXXXXXX, JP_GRV, JP_TILD, JP_COLN, + KC_LSFT, KC_ESC, KC_RGUI, KC_LALT, JP_DQUO, KC_TAB, XXXXXXX, KC_RCTL, KC_RALT, KC_RSFT, + _______, KC_DEL, _______ + ), + + [_ADJUST] = LAYOUT_reviung33( + RGB_VAI, RGB_SAI, RGB_HUI, RGB_MOD, RGB_TOG, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, + RGB_VAD, RGB_SAD, RGB_HUD, RGB_RMOD,XXXXXXX, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET, KC_F11, KC_F12, KC_CAPS, XXXXXXX, KC_PSCR, + _______, _______, _______ + ), +}; + +layer_state_t layer_state_set_user(layer_state_t state) { + return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); +} diff --git a/keyboards/reviung33/keymaps/default_jp/readme.md b/keyboards/reviung33/keymaps/default_jp/readme.md new file mode 100644 index 000000000..d7739a3d8 --- /dev/null +++ b/keyboards/reviung33/keymaps/default_jp/readme.md @@ -0,0 +1 @@ +# The default_jp keymap for reviung33 diff --git a/keyboards/reviung33/readme.md b/keyboards/reviung33/readme.md new file mode 100644 index 000000000..64ed4d57f --- /dev/null +++ b/keyboards/reviung33/readme.md @@ -0,0 +1,15 @@ +# reviung33 + +![REVIUNG33](https://github.com/gtips/reviung/blob/master/reviung33/image/reviung33-01.jpg) + +The REVIUNG33 is 33-key ortholinear keyboard. + +* Keyboard Maintainer: [gtips](https://github.com/gtips) +* Hardware Supported: REVIUNG33 PCB. +* Hardware Availability: [PCB & Case Data](https://github.com/gtips/reviung/tree/master/reviung33) + +Make example for this keyboard (after setting up your build environment): + + make reviung33:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/reviung33/reviung33.c b/keyboards/reviung33/reviung33.c new file mode 100644 index 000000000..7684cb72c --- /dev/null +++ b/keyboards/reviung33/reviung33.c @@ -0,0 +1,17 @@ +/* Copyright 2020 gtips + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "reviung33.h" diff --git a/keyboards/reviung33/reviung33.h b/keyboards/reviung33/reviung33.h new file mode 100644 index 000000000..ea72a4aad --- /dev/null +++ b/keyboards/reviung33/reviung33.h @@ -0,0 +1,40 @@ +/* Copyright 2020 gtips + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT_reviung33( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \ + K30, K31, K32 \ +) \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09 }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19 }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29 }, \ + { K30, K31, K32, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO } \ +} diff --git a/keyboards/reviung33/rules.mk b/keyboards/reviung33/rules.mk new file mode 100644 index 000000000..4581b001d --- /dev/null +++ b/keyboards/reviung33/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = no # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output