Add customisable EEPROM driver selection (#7274)

- uprintf -> dprintf
- Fix atsam "vendor" eeprom.
- Bump Kinetis K20x to 64 bytes, too.
- Rollback Kinetis to 32 bytes as partitioning can only be done once. Add warning about changing the value.
- Change RAM-backed "fake" EEPROM implementations to match eeconfig's current usage.
- Add 24LC128 by request.
This commit is contained in:
Nick Brassel 2019-11-06 08:04:50 +11:00
parent 6ff093efbe
commit d13ada1162
20 changed files with 616 additions and 52 deletions

View File

@ -102,6 +102,57 @@ ifeq ($(strip $(UNICODE_COMMON)), yes)
SRC += $(QUANTUM_DIR)/process_keycode/process_unicode_common.c
endif
VALID_EEPROM_DRIVER_TYPES := vendor custom transient i2c
EEPROM_DRIVER ?= vendor
ifeq ($(filter $(EEPROM_DRIVER),$(VALID_EEPROM_DRIVER_TYPES)),)
$(error EEPROM_DRIVER="$(EEPROM_DRIVER)" is not a valid EEPROM driver)
else
OPT_DEFS += -DEEPROM_ENABLE
ifeq ($(strip $(EEPROM_DRIVER)), custom)
OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_CUSTOM
COMMON_VPATH += $(DRIVER_PATH)/eeprom
SRC += eeprom_driver.c
else ifeq ($(strip $(EEPROM_DRIVER)), i2c)
OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_I2C
COMMON_VPATH += $(DRIVER_PATH)/eeprom
QUANTUM_LIB_SRC += i2c_master.c
SRC += eeprom_driver.c eeprom_i2c.c
else ifeq ($(strip $(EEPROM_DRIVER)), transient)
OPT_DEFS += -DEEPROM_DRIVER -DEEPROM_TRANSIENT
COMMON_VPATH += $(DRIVER_PATH)/eeprom
SRC += eeprom_driver.c eeprom_transient.c
else ifeq ($(strip $(EEPROM_DRIVER)), vendor)
OPT_DEFS += -DEEPROM_VENDOR
ifeq ($(PLATFORM),AVR)
# Automatically provided by avr-libc, nothing required
else ifeq ($(PLATFORM),CHIBIOS)
ifeq ($(MCU_SERIES), STM32F3xx)
SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c
SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c
OPT_DEFS += -DEEPROM_EMU_STM32F303xC
OPT_DEFS += -DSTM32_EEPROM_ENABLE
else ifeq ($(MCU_SERIES), STM32F1xx)
SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c
SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c
OPT_DEFS += -DEEPROM_EMU_STM32F103xB
OPT_DEFS += -DSTM32_EEPROM_ENABLE
else ifeq ($(MCU_SERIES)_$(MCU_LDSCRIPT), STM32F0xx_STM32F072xB)
SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c
SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c
OPT_DEFS += -DEEPROM_EMU_STM32F072xB
OPT_DEFS += -DSTM32_EEPROM_ENABLE
else
# This will effectively work the same as "transient" if not supported by the chip
SRC += $(PLATFORM_COMMON_DIR)/eeprom_teensy.c
endif
else ifeq ($(PLATFORM),ARM_ATSAM)
SRC += $(PLATFORM_COMMON_DIR)/eeprom.c
else ifeq ($(PLATFORM),TEST)
SRC += $(PLATFORM_COMMON_DIR)/eeprom.c
endif
endif
endif
ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
POST_CONFIG_H += $(QUANTUM_DIR)/rgblight_post_config.h
OPT_DEFS += -DRGBLIGHT_ENABLE

View File

@ -104,6 +104,7 @@
* [ADC Driver](adc_driver.md)
* [I2C Driver](i2c_driver.md)
* [WS2812 Driver](ws2812_driver.md)
* [EEPROM Driver](eeprom_driver.md)
* [GPIO Controls](internals_gpio_control.md)
* [Custom Matrix](custom_matrix.md)
* [Proton C Conversion](proton_c_conversion.md)

50
docs/eeprom_driver.md Normal file
View File

@ -0,0 +1,50 @@
# EEPROM Driver Configuration
The EEPROM driver can be swapped out depending on the needs of the keyboard, or whether extra hardware is present.
Driver | Description
--------------------------- | -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
`EEPROM_DRIVER = vendor` | Uses the on-chip driver provided by the chip manufacturer. For AVR, this is provided by avr-libc. This is supported on ARM for a subset of chips -- STM32F3xx, STM32F1xx, and STM32F072xB will be emulated by writing to flash. Other chips will generally act as "transient" below.
`EEPROM_DRIVER = i2c` | Supports writing to I2C-based 24xx EEPROM chips. See the driver section below.
`EEPROM_DRIVER = transient` | Fake EEPROM driver -- supports reading/writing to RAM, and will be discarded when power is lost.
## Vendor Driver Configuration
No configurable options are available.
## I2C Driver Configuration
Currently QMK supports 24xx-series chips over I2C. As such, requires a working i2c_master driver configuration. You can override the driver configuration via your config.h:
`config.h` override | Description | Default Value
------------------------------------------- | ----------------------------------------------------------------------------------- | ------------------------------------
`#define EXTERNAL_EEPROM_I2C_BASE_ADDRESS` | Base I2C address for the EEPROM -- shifted left by 1 as per i2c_master requirements | 0b10100000
`#define EXTERNAL_EEPROM_I2C_ADDRESS(addr)` | Calculated I2C address for the EEPROM | `(EXTERNAL_EEPROM_I2C_BASE_ADDRESS)`
`#define EXTERNAL_EEPROM_BYTE_COUNT` | Total size of the EEPROM in bytes | 8192
`#define EXTERNAL_EEPROM_PAGE_SIZE` | Page size of the EEPROM in bytes, as specified in the datasheet | 32
`#define EXTERNAL_EEPROM_ADDRESS_SIZE` | The number of bytes to transmit for the memory location within the EEPROM | 2
`#define EXTERNAL_EEPROM_WRITE_TIME` | Write cycle time of the EEPROM, as specified in the datasheet | 5
Default values and extended descriptions can be found in `drivers/eeprom/eeprom_i2c.h`.
Alternatively, there are pre-defined hardware configurations for available chips/modules:
Module | Equivalent `#define` | Source
-----------------|---------------------------------|------------------------------------------
CAT24C512 EEPROM | `#define EEPROM_I2C_CAT24C512` | <https://www.sparkfun.com/products/14764>
RM24C512C EEPROM | `#define EEPROM_I2C_RM24C512C` | <https://www.sparkfun.com/products/14764>
24LC128 EEPROM | `#define EEPROM_I2C_24LC128` | <https://www.microchip.com/wwwproducts/en/24LC128>
24LC256 EEPROM | `#define EEPROM_I2C_24LC256` | <https://www.sparkfun.com/products/525>
MB85RC256V FRAM | `#define EEPROM_I2C_MB85RC256V` | <https://www.adafruit.com/product/1895>
?> If you find that the EEPROM is not cooperating, ensure you've correctly shifted up your EEPROM address by 1. For example, the datasheet might state the address as `0b01010000` -- the correct value of `EXTERNAL_EEPROM_I2C_BASE_ADDRESS` needs to be `0b10100000`.
## Transient Driver configuration
The only configurable item for the transient EEPROM driver is its size:
`config.h` override | Description | Default Value
------------------------------- | ----------------------------------------- | -------------
`#define TRANSIENT_EEPROM_SIZE` | Total size of the EEPROM storage in bytes | 64
Default values and extended descriptions can be found in `drivers/eeprom/eeprom_transient.h`.

View File

@ -33,3 +33,7 @@ Support for up to 2 drivers. Each driver impliments 2 charlieplex matrices to in
## IS31FL3733
Support for up to a single driver with room for expansion. Each driver can control 192 individual LEDs or 64 RGB LEDs. For more information on how to setup the driver see the [RGB Matrix](feature_rgb_matrix.md) page.
## 24xx series external I2C EEPROM
Support for an external I2C-based EEPROM instead of using the on-chip EEPROM. For more information on how to setup the driver see the [EEPROM Driver](eeprom_driver.md) page.

View File

@ -0,0 +1,46 @@
/* Copyright 2019 Nick Brassel (tzarc)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <string.h>
#include "eeprom_driver.h"
void eeprom_driver_init(void) {
/* Any initialisation code */
}
void eeprom_driver_erase(void) {
/* Wipe out the EEPROM, setting values to zero */
}
void eeprom_read_block(void *buf, const void *addr, size_t len) {
/*
Read a block of data:
buf: target buffer
addr: 0-based offset within the EEPROM
len: length to read
*/
}
void eeprom_write_block(const void *buf, void *addr, size_t len) {
/*
Write a block of data:
buf: target buffer
addr: 0-based offset within the EEPROM
len: length to write
*/
}

View File

@ -0,0 +1,73 @@
/* Copyright 2019 Nick Brassel (tzarc)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <string.h>
#include "eeprom_driver.h"
uint8_t eeprom_read_byte(const uint8_t *addr) {
uint8_t ret;
eeprom_read_block(&ret, addr, 1);
return ret;
}
uint16_t eeprom_read_word(const uint16_t *addr) {
uint16_t ret;
eeprom_read_block(&ret, addr, 2);
return ret;
}
uint32_t eeprom_read_dword(const uint32_t *addr) {
uint32_t ret;
eeprom_read_block(&ret, addr, 4);
return ret;
}
void eeprom_write_byte(uint8_t *addr, uint8_t value) { eeprom_write_block(&value, addr, 1); }
void eeprom_write_word(uint16_t *addr, uint16_t value) { eeprom_write_block(&value, addr, 2); }
void eeprom_write_dword(uint32_t *addr, uint32_t value) { eeprom_write_block(&value, addr, 4); }
void eeprom_update_block(const void *buf, void *addr, size_t len) {
uint8_t read_buf[len];
eeprom_read_block(read_buf, addr, len);
if (memcmp(buf, read_buf, len) != 0) {
eeprom_write_block(buf, addr, len);
}
}
void eeprom_update_byte(uint8_t *addr, uint8_t value) {
uint8_t orig = eeprom_read_byte(addr);
if (orig != value) {
eeprom_write_byte(addr, value);
}
}
void eeprom_update_word(uint16_t *addr, uint16_t value) {
uint16_t orig = eeprom_read_word(addr);
if (orig != value) {
eeprom_write_word(addr, value);
}
}
void eeprom_update_dword(uint32_t *addr, uint32_t value) {
uint32_t orig = eeprom_read_dword(addr);
if (orig != value) {
eeprom_write_dword(addr, value);
}
}

View File

@ -0,0 +1,22 @@
/* Copyright 2019 Nick Brassel (tzarc)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "eeprom.h"
void eeprom_driver_init(void);
void eeprom_driver_erase(void);

120
drivers/eeprom/eeprom_i2c.c Normal file
View File

@ -0,0 +1,120 @@
/* Copyright 2019 Nick Brassel (tzarc)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <string.h>
/*
Note that the implementations of eeprom_XXXX_YYYY on AVR are normally
provided by avr-libc. The same functions are reimplemented below and are
rerouted to the external i2c equivalent.
Seemingly, as this is compiled from within QMK, the object file generated
during the build overrides the avr-libc implementation during the linking
stage.
On other platforms such as ARM, there are no provided implementations, so
there is nothing to override during linkage.
*/
#include "wait.h"
#include "i2c_master.h"
#include "eeprom.h"
#include "eeprom_i2c.h"
// #define DEBUG_EEPROM_OUTPUT
#ifdef DEBUG_EEPROM_OUTPUT
# include "print.h"
#endif // DEBUG_EEPROM_OUTPUT
static inline void init_i2c_if_required(void) {
static int done = 0;
if (!done) {
i2c_init();
done = 1;
}
}
static inline void fill_target_address(uint8_t *buffer, const void *addr) {
intptr_t p = (intptr_t)addr;
for (int i = 0; i < EXTERNAL_EEPROM_ADDRESS_SIZE; ++i) {
buffer[EXTERNAL_EEPROM_ADDRESS_SIZE - 1 - i] = p & 0xFF;
p >>= 8;
}
}
void eeprom_driver_init(void) {}
void eeprom_driver_erase(void) {
uint8_t buf[EXTERNAL_EEPROM_PAGE_SIZE];
memset(buf, 0x00, EXTERNAL_EEPROM_PAGE_SIZE);
for (intptr_t addr = 0; addr < EXTERNAL_EEPROM_BYTE_COUNT; addr += EXTERNAL_EEPROM_PAGE_SIZE) {
eeprom_write_block(buf, (void *)addr, EXTERNAL_EEPROM_PAGE_SIZE);
}
}
void eeprom_read_block(void *buf, const void *addr, size_t len) {
uint8_t complete_packet[EXTERNAL_EEPROM_ADDRESS_SIZE];
fill_target_address(complete_packet, addr);
init_i2c_if_required();
i2c_transmit(EXTERNAL_EEPROM_I2C_ADDRESS((intptr_t)addr), complete_packet, EXTERNAL_EEPROM_ADDRESS_SIZE, 100);
i2c_receive(EXTERNAL_EEPROM_I2C_ADDRESS((intptr_t)addr), buf, len, 100);
#ifdef DEBUG_EEPROM_OUTPUT
dprintf("[EEPROM R] 0x%04X: ", ((int)addr));
for (size_t i = 0; i < len; ++i) {
dprintf(" %02X", (int)(((uint8_t *)buf)[i]));
}
dprintf("\n");
#endif // DEBUG_EEPROM_OUTPUT
}
void eeprom_write_block(const void *buf, void *addr, size_t len) {
uint8_t complete_packet[EXTERNAL_EEPROM_ADDRESS_SIZE + EXTERNAL_EEPROM_PAGE_SIZE];
uint8_t *read_buf = (uint8_t *)buf;
intptr_t target_addr = (intptr_t)addr;
init_i2c_if_required();
while (len > 0) {
intptr_t page_offset = target_addr % EXTERNAL_EEPROM_PAGE_SIZE;
int write_length = EXTERNAL_EEPROM_PAGE_SIZE - page_offset;
if (write_length > len) {
write_length = len;
}
fill_target_address(complete_packet, (const void *)target_addr);
for (uint8_t i = 0; i < write_length; i++) {
complete_packet[EXTERNAL_EEPROM_ADDRESS_SIZE + i] = read_buf[i];
}
#ifdef DEBUG_EEPROM_OUTPUT
dprintf("[EEPROM W] 0x%04X: ", ((int)target_addr));
for (uint8_t i = 0; i < write_length; i++) {
dprintf(" %02X", (int)(read_buf[i]));
}
dprintf("\n");
#endif // DEBUG_EEPROM_OUTPUT
i2c_transmit(EXTERNAL_EEPROM_I2C_ADDRESS((intptr_t)addr), complete_packet, EXTERNAL_EEPROM_ADDRESS_SIZE + write_length, 100);
wait_ms(EXTERNAL_EEPROM_WRITE_TIME);
read_buf += write_length;
target_addr += write_length;
len -= write_length;
}
}

115
drivers/eeprom/eeprom_i2c.h Normal file
View File

@ -0,0 +1,115 @@
/* Copyright 2019 Nick Brassel (tzarc)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/*
Default device configurations:
For the Sparkfun Qwiic I2C EEPROM module: https://www.sparkfun.com/products/14764
#define EEPROM_I2C_CAT24C512 // (part number 24512A)
#define EEPROM_I2C_RM24C512C // (part number 24512C)
For the Sparkfun I2C EEPROM chip: https://www.sparkfun.com/products/525
#define EEPROM_I2C_24LC256
For the Adafruit I2C FRAM chip: https://www.adafruit.com/product/1895
#define EEPROM_I2C_MB85RC256V
*/
#if defined(EEPROM_I2C_CAT24C512)
# define EXTERNAL_EEPROM_BYTE_COUNT 65536
# define EXTERNAL_EEPROM_PAGE_SIZE 128
# define EXTERNAL_EEPROM_ADDRESS_SIZE 2
# define EXTERNAL_EEPROM_WRITE_TIME 5
#elif defined(EEPROM_I2C_RM24C512C)
# define EXTERNAL_EEPROM_BYTE_COUNT 65536
# define EXTERNAL_EEPROM_PAGE_SIZE 128
# define EXTERNAL_EEPROM_ADDRESS_SIZE 2
# define EXTERNAL_EEPROM_WRITE_TIME 3
#elif defined(EEPROM_I2C_24LC256)
# define EXTERNAL_EEPROM_BYTE_COUNT 32768
# define EXTERNAL_EEPROM_PAGE_SIZE 64
# define EXTERNAL_EEPROM_ADDRESS_SIZE 2
# define EXTERNAL_EEPROM_WRITE_TIME 5
#elif defined(EEPROM_I2C_24LC128)
# define EXTERNAL_EEPROM_BYTE_COUNT 16384
# define EXTERNAL_EEPROM_PAGE_SIZE 64
# define EXTERNAL_EEPROM_ADDRESS_SIZE 2
# define EXTERNAL_EEPROM_WRITE_TIME 5
#elif defined(EEPROM_I2C_MB85RC256V)
# define EXTERNAL_EEPROM_BYTE_COUNT 32768
# define EXTERNAL_EEPROM_PAGE_SIZE 128
# define EXTERNAL_EEPROM_ADDRESS_SIZE 2
# define EXTERNAL_EEPROM_WRITE_TIME 0
#endif
/*
The base I2C address of the EEPROM.
This needs to be shifted up by 1, to match i2c_master requirements.
*/
#ifndef EXTERNAL_EEPROM_I2C_BASE_ADDRESS
# define EXTERNAL_EEPROM_I2C_BASE_ADDRESS 0b10100000
#endif
/*
The calculated I2C address based on the input memory location.
For EEPROM chips that embed part of the memory location in the I2C address
such as AT24M02 you can use something similar to the following (ensuring the
result is shifted by left by 1):
#define EXTERNAL_EEPROM_I2C_ADDRESS(loc) \
(EXTERNAL_EEPROM_I2C_BASE_ADDRESS | ((((loc) >> 16) & 0x07) << 1))
*/
#ifndef EXTERNAL_EEPROM_I2C_ADDRESS
# define EXTERNAL_EEPROM_I2C_ADDRESS(loc) (EXTERNAL_EEPROM_I2C_BASE_ADDRESS)
#endif
/*
The total size of the EEPROM, in bytes. The EEPROM datasheet will usually
specify this value in kbits, and will require conversion to bytes.
*/
#ifndef EXTERNAL_EEPROM_BYTE_COUNT
# define EXTERNAL_EEPROM_BYTE_COUNT 8192
#endif
/*
The page size in bytes of the EEPROM, as specified in the datasheet.
*/
#ifndef EXTERNAL_EEPROM_PAGE_SIZE
# define EXTERNAL_EEPROM_PAGE_SIZE 32
#endif
/*
The address size in bytes of the EEPROM. For EEPROMs with <=256 bytes, this
will likely be 1. For EEPROMs >256 and <=65536, this will be 2. For EEPROMs
>65536, this will likely need to be 2 with the modified variant of
EXTERNAL_EEPROM_I2C_ADDRESS above.
As expected, consult the datasheet for specifics of your EEPROM.
*/
#ifndef EXTERNAL_EEPROM_ADDRESS_SIZE
# define EXTERNAL_EEPROM_ADDRESS_SIZE 2
#endif
/*
The write cycle time of the EEPROM in milliseconds, as specified in the
datasheet.
*/
#ifndef EXTERNAL_EEPROM_WRITE_TIME
# define EXTERNAL_EEPROM_WRITE_TIME 5
#endif

View File

@ -0,0 +1,52 @@
/* Copyright 2019 Nick Brassel (tzarc)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <string.h>
#include "eeprom_driver.h"
#include "eeprom_transient.h"
__attribute__((aligned(4))) static uint8_t transientBuffer[TRANSIENT_EEPROM_SIZE] = {0};
size_t clamp_length(intptr_t offset, size_t len) {
if (offset + len > TRANSIENT_EEPROM_SIZE) {
len = TRANSIENT_EEPROM_SIZE - offset;
}
return len;
}
void eeprom_driver_init(void) { eeprom_driver_erase(); }
void eeprom_driver_erase(void) { memset(transientBuffer, 0x00, TRANSIENT_EEPROM_SIZE); }
void eeprom_read_block(void *buf, const void *addr, size_t len) {
intptr_t offset = (intptr_t)addr;
memset(buf, 0x00, len);
len = clamp_length(offset, len);
if (len > 0) {
memcpy(buf, &transientBuffer[offset], len);
}
}
void eeprom_write_block(const void *buf, void *addr, size_t len) {
intptr_t offset = (intptr_t)addr;
len = clamp_length(offset, len);
if (len > 0) {
memcpy(&transientBuffer[offset], buf, len);
}
}

View File

@ -0,0 +1,25 @@
/* Copyright 2019 Nick Brassel (tzarc)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/*
The size of the transient EEPROM buffer size.
*/
#ifndef TRANSIENT_EEPROM_SIZE
# include "eeconfig.h"
# define TRANSIENT_EEPROM_SIZE (((EECONFIG_SIZE+3)/4)*4) // based off eeconfig's current usage, aligned to 4-byte sizes, to deal with LTO
#endif

View File

@ -258,7 +258,7 @@ void audio_init() {
}
// Check EEPROM
#if defined(STM32_EEPROM_ENABLE) || defined(PROTOCOL_ARM_ATSAM) || defined(EEPROM_SIZE)
#ifdef EEPROM_ENABLE
if (!eeconfig_is_enabled()) {
eeconfig_init();
}

View File

@ -19,9 +19,11 @@
# include <avr/eeprom.h>
# include <avr/interrupt.h>
#endif
#ifdef EEPROM_ENABLE
# include "eeprom.h"
#endif
#ifdef STM32_EEPROM_ENABLE
# include "hal.h"
# include "eeprom.h"
# include "eeprom_stm32.h"
#endif
#include "wait.h"
@ -146,7 +148,7 @@ void rgblight_check_config(void) {
}
uint32_t eeconfig_read_rgblight(void) {
#if defined(__AVR__) || defined(STM32_EEPROM_ENABLE) || defined(PROTOCOL_ARM_ATSAM) || defined(EEPROM_SIZE)
#ifdef EEPROM_ENABLE
return eeprom_read_dword(EECONFIG_RGBLIGHT);
#else
return 0;
@ -154,7 +156,7 @@ uint32_t eeconfig_read_rgblight(void) {
}
void eeconfig_update_rgblight(uint32_t val) {
#if defined(__AVR__) || defined(STM32_EEPROM_ENABLE) || defined(PROTOCOL_ARM_ATSAM) || defined(EEPROM_SIZE)
#ifdef EEPROM_ENABLE
rgblight_check_config();
eeprom_update_dword(EECONFIG_RGBLIGHT, val);
#endif

View File

@ -31,24 +31,6 @@ endif
ifeq ($(PLATFORM),CHIBIOS)
TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/printf.c
ifeq ($(MCU_SERIES), STM32F3xx)
TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c
TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c
TMK_COMMON_DEFS += -DEEPROM_EMU_STM32F303xC
TMK_COMMON_DEFS += -DSTM32_EEPROM_ENABLE
else ifeq ($(MCU_SERIES), STM32F1xx)
TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c
TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c
TMK_COMMON_DEFS += -DEEPROM_EMU_STM32F103xB
TMK_COMMON_DEFS += -DSTM32_EEPROM_ENABLE
else ifeq ($(MCU_SERIES)_$(MCU_LDSCRIPT), STM32F0xx_STM32F072xB)
TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c
TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c
TMK_COMMON_DEFS += -DEEPROM_EMU_STM32F072xB
TMK_COMMON_DEFS += -DSTM32_EEPROM_ENABLE
else
TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/eeprom_teensy.c
endif
ifeq ($(strip $(AUTO_SHIFT_ENABLE)), yes)
TMK_COMMON_SRC += $(CHIBIOS)/os/various/syscalls.c
else ifeq ($(strip $(TERMINAL_ENABLE)), yes)
@ -58,14 +40,8 @@ endif
ifeq ($(PLATFORM),ARM_ATSAM)
TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/printf.c
TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/eeprom.c
endif
ifeq ($(PLATFORM),TEST)
TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/eeprom.c
endif
# Option modules
BOOTMAGIC_ENABLE ?= no

View File

@ -16,9 +16,12 @@
#include "eeprom.h"
#define EEPROM_SIZE 32
#ifndef EEPROM_SIZE
# include "eeconfig.h"
# define EEPROM_SIZE (((EECONFIG_SIZE+3)/4)*4) // based off eeconfig's current usage, aligned to 4-byte sizes, to deal with LTO
#endif
static uint8_t buffer[EEPROM_SIZE];
__attribute__((aligned(4))) static uint8_t buffer[EEPROM_SIZE];
uint8_t eeprom_read_byte(const uint8_t *addr) {
uintptr_t offset = (uintptr_t)addr;
@ -40,7 +43,7 @@ uint32_t eeprom_read_dword(const uint32_t *addr) {
return eeprom_read_byte(p) | (eeprom_read_byte(p + 1) << 8) | (eeprom_read_byte(p + 2) << 16) | (eeprom_read_byte(p + 3) << 24);
}
void eeprom_read_block(void *buf, const void *addr, uint32_t len) {
void eeprom_read_block(void *buf, const void *addr, size_t len) {
const uint8_t *p = (const uint8_t *)addr;
uint8_t * dest = (uint8_t *)buf;
while (len--) {
@ -62,7 +65,7 @@ void eeprom_write_dword(uint32_t *addr, uint32_t value) {
eeprom_write_byte(p, value >> 24);
}
void eeprom_write_block(const void *buf, void *addr, uint32_t len) {
void eeprom_write_block(const void *buf, void *addr, size_t len) {
uint8_t * p = (uint8_t *)addr;
const uint8_t *src = (const uint8_t *)buf;
while (len--) {
@ -86,7 +89,7 @@ void eeprom_update_dword(uint32_t *addr, uint32_t value) {
eeprom_write_byte(p, value >> 24);
}
void eeprom_update_block(const void *buf, void *addr, uint32_t len) {
void eeprom_update_block(const void *buf, void *addr, size_t len) {
uint8_t * p = (uint8_t *)addr;
const uint8_t *src = (const uint8_t *)buf;
while (len--) {

View File

@ -173,7 +173,7 @@ void eeprom_update_dword(uint32_t *Address, uint32_t Value) {
}
}
void eeprom_read_block(void *buf, const void *addr, uint32_t len) {
void eeprom_read_block(void *buf, const void *addr, size_t len) {
const uint8_t *p = (const uint8_t *)addr;
uint8_t * dest = (uint8_t *)buf;
while (len--) {
@ -181,7 +181,7 @@ void eeprom_read_block(void *buf, const void *addr, uint32_t len) {
}
}
void eeprom_write_block(const void *buf, void *addr, uint32_t len) {
void eeprom_write_block(const void *buf, void *addr, size_t len) {
uint8_t * p = (uint8_t *)addr;
const uint8_t *src = (const uint8_t *)buf;
while (len--) {
@ -189,7 +189,7 @@ void eeprom_write_block(const void *buf, void *addr, uint32_t len) {
}
}
void eeprom_update_block(const void *buf, void *addr, uint32_t len) {
void eeprom_update_block(const void *buf, void *addr, size_t len) {
uint8_t * p = (uint8_t *)addr;
const uint8_t *src = (const uint8_t *)buf;
while (len--) {

View File

@ -50,7 +50,17 @@
// (aligned to 2 or 4 byte boundaries) has twice the endurance
// compared to writing 8 bit bytes.
//
# ifndef EEPROM_SIZE
# define EEPROM_SIZE 32
# endif
/*
^^^ Here be dragons:
NXP AppNote AN4282 section 3.1 states that partitioning must only be done once.
Once EEPROM partitioning is done, the size is locked to this initial configuration.
Attempts to modify the EEPROM_SIZE setting may brick your board.
*/
// Writing unaligned 16 or 32 bit data is handled automatically when
// this is defined, but at a cost of extra code size. Without this,
@ -517,8 +527,11 @@ void eeprom_write_block(const void *buf, void *addr, uint32_t len) {
#else
// No EEPROM supported, so emulate it
# define EEPROM_SIZE 32
static uint8_t buffer[EEPROM_SIZE];
# ifndef EEPROM_SIZE
# include "eeconfig.h"
# define EEPROM_SIZE (((EECONFIG_SIZE+3)/4)*4) // based off eeconfig's current usage, aligned to 4-byte sizes, to deal with LTO
# endif
__attribute__((aligned(4))) static uint8_t buffer[EEPROM_SIZE];
uint8_t eeprom_read_byte(const uint8_t *addr) {
uint32_t offset = (uint32_t)addr;
@ -540,7 +553,7 @@ uint32_t eeprom_read_dword(const uint32_t *addr) {
return eeprom_read_byte(p) | (eeprom_read_byte(p + 1) << 8) | (eeprom_read_byte(p + 2) << 16) | (eeprom_read_byte(p + 3) << 24);
}
void eeprom_read_block(void *buf, const void *addr, uint32_t len) {
void eeprom_read_block(void *buf, const void *addr, size_t len) {
const uint8_t *p = (const uint8_t *)addr;
uint8_t * dest = (uint8_t *)buf;
while (len--) {
@ -562,7 +575,7 @@ void eeprom_write_dword(uint32_t *addr, uint32_t value) {
eeprom_write_byte(p, value >> 24);
}
void eeprom_write_block(const void *buf, void *addr, uint32_t len) {
void eeprom_write_block(const void *buf, void *addr, size_t len) {
uint8_t * p = (uint8_t *)addr;
const uint8_t *src = (const uint8_t *)buf;
while (len--) {
@ -589,7 +602,7 @@ void eeprom_update_dword(uint32_t *addr, uint32_t value) {
eeprom_write_byte(p, value >> 24);
}
void eeprom_update_block(const void *buf, void *addr, uint32_t len) {
void eeprom_update_block(const void *buf, void *addr, size_t len) {
uint8_t * p = (uint8_t *)addr;
const uint8_t *src = (const uint8_t *)buf;
while (len--) {

View File

@ -9,6 +9,10 @@
# include "eeprom_stm32.h"
#endif
#if defined(EEPROM_DRIVER)
# include "eeprom_driver.h"
#endif
/** \brief eeconfig enable
*
* FIXME: needs doc
@ -31,6 +35,9 @@ __attribute__((weak)) void eeconfig_init_kb(void) {
void eeconfig_init_quantum(void) {
#ifdef STM32_EEPROM_ENABLE
EEPROM_Erase();
#endif
#if defined(EEPROM_DRIVER)
eeprom_driver_erase();
#endif
eeprom_update_word(EECONFIG_MAGIC, EECONFIG_MAGIC_NUMBER);
eeprom_update_byte(EECONFIG_DEBUG, 0);
@ -80,6 +87,9 @@ void eeconfig_enable(void) { eeprom_update_word(EECONFIG_MAGIC, EECONFIG_MAGIC_N
void eeconfig_disable(void) {
#ifdef STM32_EEPROM_ENABLE
EEPROM_Erase();
#endif
#if defined(EEPROM_DRIVER)
eeprom_driver_erase();
#endif
eeprom_update_word(EECONFIG_MAGIC, EECONFIG_MAGIC_NUMBER_OFF);
}

View File

@ -1,23 +1,24 @@
#ifndef TMK_CORE_COMMON_EEPROM_H_
#define TMK_CORE_COMMON_EEPROM_H_
#if defined(__AVR__)
#if defined(__AVR__) && !defined(EEPROM_DRIVER)
# include <avr/eeprom.h>
#else
# include <stdint.h>
# include <stdlib.h>
uint8_t eeprom_read_byte(const uint8_t *__p);
uint16_t eeprom_read_word(const uint16_t *__p);
uint32_t eeprom_read_dword(const uint32_t *__p);
void eeprom_read_block(void *__dst, const void *__src, uint32_t __n);
void eeprom_read_block(void *__dst, const void *__src, size_t __n);
void eeprom_write_byte(uint8_t *__p, uint8_t __value);
void eeprom_write_word(uint16_t *__p, uint16_t __value);
void eeprom_write_dword(uint32_t *__p, uint32_t __value);
void eeprom_write_block(const void *__src, void *__dst, uint32_t __n);
void eeprom_write_block(const void *__src, void *__dst, size_t __n);
void eeprom_update_byte(uint8_t *__p, uint8_t __value);
void eeprom_update_word(uint16_t *__p, uint16_t __value);
void eeprom_update_dword(uint32_t *__p, uint32_t __value);
void eeprom_update_block(const void *__src, void *__dst, uint32_t __n);
void eeprom_update_block(const void *__src, void *__dst, size_t __n);
#endif
#endif /* TMK_CORE_COMMON_EEPROM_H_ */

View File

@ -40,7 +40,7 @@ uint32_t eeprom_read_dword(const uint32_t *addr) {
return eeprom_read_byte(p) | (eeprom_read_byte(p + 1) << 8) | (eeprom_read_byte(p + 2) << 16) | (eeprom_read_byte(p + 3) << 24);
}
void eeprom_read_block(void *buf, const void *addr, uint32_t len) {
void eeprom_read_block(void *buf, const void *addr, size_t len) {
const uint8_t *p = (const uint8_t *)addr;
uint8_t * dest = (uint8_t *)buf;
while (len--) {
@ -62,7 +62,7 @@ void eeprom_write_dword(uint32_t *addr, uint32_t value) {
eeprom_write_byte(p, value >> 24);
}
void eeprom_write_block(const void *buf, void *addr, uint32_t len) {
void eeprom_write_block(const void *buf, void *addr, size_t len) {
uint8_t * p = (uint8_t *)addr;
const uint8_t *src = (const uint8_t *)buf;
while (len--) {
@ -86,7 +86,7 @@ void eeprom_update_dword(uint32_t *addr, uint32_t value) {
eeprom_write_byte(p, value >> 24);
}
void eeprom_update_block(const void *buf, void *addr, uint32_t len) {
void eeprom_update_block(const void *buf, void *addr, size_t len) {
uint8_t * p = (uint8_t *)addr;
const uint8_t *src = (const uint8_t *)buf;
while (len--) {