Trim firmware sizes from default rules.mk, part 3 (#8045)
This commit is contained in:
parent
0f7d294ac3
commit
d2e1cc4d48
@ -15,10 +15,10 @@ BOOTLOADER = caterina
|
|||||||
# change to "no" to disable the options, or define them in the Makefile in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||||
|
@ -15,10 +15,10 @@ BOOTLOADER = caterina
|
|||||||
# change to "no" to disable the options, or define them in the Makefile in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = caterina
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||||
|
@ -14,22 +14,22 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
|
|
||||||
#UNICODEMAP_ENABLE = yes # for emoji user
|
#UNICODEMAP_ENABLE = yes # for emoji user
|
||||||
#RGBLIGHT_ENABLE = yes # uncomment if you want addressable led strips
|
#RGBLIGHT_ENABLE = yes # uncomment if you want addressable led strips
|
||||||
|
@ -14,10 +14,10 @@ F_CPU = 8000000
|
|||||||
# ATmega328P USBasp
|
# ATmega328P USBasp
|
||||||
BOOTLOADER = caterina
|
BOOTLOADER = caterina
|
||||||
|
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,12 +25,12 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
CUSTOM_MATRIX = yes
|
CUSTOM_MATRIX = yes
|
||||||
DEBUG_ENABLE = yes
|
DEBUG_ENABLE = yes
|
||||||
BLUETOOTH = AdafruitBLE
|
BLUETOOTH = AdafruitBLE
|
||||||
|
@ -15,10 +15,10 @@ BOOTLOADER = caterina
|
|||||||
# change to "no" to disable the options, or define them in the Makefile in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,9 +25,9 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = caterina
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,9 +25,9 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,11 +25,11 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
|
|
||||||
LAYOUTS = ortho_6x4
|
LAYOUTS = ortho_6x4
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,12 +25,12 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
EXTRAFLAGS += -flto
|
EXTRAFLAGS += -flto
|
||||||
|
|
||||||
LAYOUTS = 60_ansi 60_iso 60_hhkb 60_tsangan_hhkb
|
LAYOUTS = 60_ansi 60_iso 60_hhkb 60_tsangan_hhkb
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE ?= no # Mouse keys
|
||||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE ?= yes # Audio control and System control
|
||||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
CONSOLE_ENABLE ?= no # Console for debug
|
||||||
COMMAND_ENABLE ?= no # Commands for debug and configuration
|
COMMAND_ENABLE ?= no # Commands for debug and configuration
|
||||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,11 +25,11 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
|
|
||||||
LAYOUTS = 65_ansi_blocker
|
LAYOUTS = 65_ansi_blocker
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,9 +25,9 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,9 +25,9 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
# CONSOLE_ENABLE = yes # Console for debug(+400)
|
# CONSOLE_ENABLE = yes # Console for debug
|
||||||
# COMMAND_ENABLE = yes # Commands for debug and configuration
|
# COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key
|
KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key
|
||||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = halfkay
|
|||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE ?= yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE ?= yes # Audio control and System control
|
||||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
CONSOLE_ENABLE ?= no # Console for debug
|
||||||
COMMAND_ENABLE ?= no # Commands for debug and configuration
|
COMMAND_ENABLE ?= no # Commands for debug and configuration
|
||||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
@ -15,12 +15,12 @@ BOOTLOADER = atmel-dfu
|
|||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
MIDI_ENABLE = no # MIDI controls
|
MIDI_ENABLE = no # MIDI controls
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
|
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
|
@ -5,10 +5,10 @@ MCU = atmega32u4
|
|||||||
# change to "no" to disable the options, or define them in the Makefile in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,10 +25,10 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
SPLIT_KEYBOARD=yes
|
SPLIT_KEYBOARD=yes
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,10 +25,10 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
SPLIT_KEYBOARD=yes
|
SPLIT_KEYBOARD=yes
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE ?= yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE ?= yes # Audio control and System control
|
||||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
CONSOLE_ENABLE ?= yes # Console for debug
|
||||||
COMMAND_ENABLE ?= no # Commands for debug and configuration
|
COMMAND_ENABLE ?= no # Commands for debug and configuration
|
||||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
@ -18,10 +18,10 @@ BOOTLOADER = caterina
|
|||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
#
|
#
|
||||||
BLUETOOTH = AdafruitBLE
|
BLUETOOTH = AdafruitBLE
|
||||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = no # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = caterina
|
|||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = no # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,9 +25,9 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
|
@ -18,14 +18,14 @@
|
|||||||
# change to "no" to disable the options, or define them in the Makefile in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = halfkay
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,7 +25,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = caterina
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = no # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,12 +25,12 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
|
|
||||||
SPLIT_KEYBOARD = yes
|
SPLIT_KEYBOARD = yes
|
||||||
|
|
||||||
|
@ -17,10 +17,10 @@ OPT_DEFS = -DDEBUG_LEVEL=0
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -28,12 +28,12 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
|
|
||||||
LAYOUTS = ortho_4x12 planck_mit
|
LAYOUTS = ortho_4x12 planck_mit
|
||||||
LAYOUTS_HAS_RGB = no
|
LAYOUTS_HAS_RGB = no
|
||||||
|
@ -5,11 +5,11 @@ MCU = STM32F303
|
|||||||
# change to "no" to disable the options, or define them in the Makefile in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||||
## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
|
## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||||
|
@ -15,10 +15,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# change to "no" to disable the options, or define them in the Makefile in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||||
|
@ -15,10 +15,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# change to "no" to disable the options, or define them in the Makefile in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||||
|
@ -15,10 +15,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# change to "no" to disable the options, or define them in the Makefile in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||||
|
@ -15,10 +15,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# change to "no" to disable the options, or define them in the Makefile in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||||
|
@ -15,10 +15,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# change to "no" to disable the options, or define them in the Makefile in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||||
|
@ -15,10 +15,10 @@ BOOTLOADER = qmk-dfu
|
|||||||
# change to "no" to disable the options, or define them in the Makefile in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||||
|
@ -5,11 +5,11 @@ MCU = STM32F303
|
|||||||
# change to "no" to disable the options, or define them in the Makefile in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||||
## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
|
## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||||
|
@ -15,9 +15,9 @@ BOOTLOADER = atmel-dfu
|
|||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = lite
|
BOOTMAGIC_ENABLE = lite
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
@ -15,10 +15,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# change to "no" to disable the options, or define them in the Makefile in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||||
|
@ -15,10 +15,10 @@ BOOTLOADER = qmk-dfu
|
|||||||
# change to "no" to disable the options, or define them in the Makefile in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||||
|
@ -5,11 +5,11 @@ MCU = STM32F303
|
|||||||
# change to "no" to disable the options, or define them in the Makefile in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||||
## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
|
## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,9 +25,9 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,9 +25,9 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,11 +25,11 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
|
|
||||||
LAYOUTS = ortho_5x6 numpad_5x6
|
LAYOUTS = ortho_5x6 numpad_5x6
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,9 +25,9 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE ?= yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE ?= yes # Audio control and System control
|
||||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
CONSOLE_ENABLE ?= no # Console for debug
|
||||||
COMMAND_ENABLE ?= no # Commands for debug and configuration
|
COMMAND_ENABLE ?= no # Commands for debug and configuration
|
||||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
@ -15,10 +15,10 @@ BOOTLOADER = halfkay
|
|||||||
# change to "no" to disable the options, or define them in the Makefile in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,9 +25,9 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
|
@ -15,10 +15,10 @@ BOOTLOADER = caterina
|
|||||||
# change to "no" to disable the options, or define them in the Makefile in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = no # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = halfkay
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,9 +25,9 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
|
@ -14,17 +14,17 @@ BOOTLOADER = caterina
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = caterina
|
|||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
#
|
#
|
||||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge
|
CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = qmk-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,12 +25,12 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
|
|
||||||
CUSTOM_MATRIX = yes
|
CUSTOM_MATRIX = yes
|
||||||
SRC += matrix.c
|
SRC += matrix.c
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = qmk-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,12 +25,12 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
|
|
||||||
CUSTOM_MATRIX = yes
|
CUSTOM_MATRIX = yes
|
||||||
SRC += matrix.c
|
SRC += matrix.c
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = caterina
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,9 +25,9 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = caterina
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,9 +25,9 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
|
@ -2,7 +2,7 @@
|
|||||||
# Example:
|
# Example:
|
||||||
# if you wanted to disable EXTRAKEY_ENABLE, you would copy the line from the rev1/rules.mk file
|
# if you wanted to disable EXTRAKEY_ENABLE, you would copy the line from the rev1/rules.mk file
|
||||||
# and paste it in to this file, changing the yes to no. Like so:
|
# and paste it in to this file, changing the yes to no. Like so:
|
||||||
# EXTRAKEY_ENABLE = no # Audio control and System control(+450)
|
# EXTRAKEY_ENABLE = no # Audio control and System control
|
||||||
#
|
#
|
||||||
# To keep things clean and tidy, as well as make upgrades easier, only place overrides from the defaults in this file.
|
# To keep things clean and tidy, as well as make upgrades easier, only place overrides from the defaults in this file.
|
||||||
|
|
||||||
|
@ -1,14 +1,14 @@
|
|||||||
# RGBKB Sol Rev1 Defaults
|
# RGBKB Sol Rev1 Defaults
|
||||||
|
|
||||||
# Keycode Options
|
# Keycode Options
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
UNICODE_ENABLE = no # Unicode keycodes
|
UNICODE_ENABLE = no # Unicode keycodes
|
||||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
|
||||||
# Debug Options
|
# Debug Options
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
|
|
||||||
# RGB Options
|
# RGB Options
|
||||||
|
@ -8,7 +8,7 @@ UNICODE_ENABLE = no # Unicode keycodes
|
|||||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
|
||||||
# Debug Options
|
# Debug Options
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
|
|
||||||
# RGB Options
|
# RGB Options
|
||||||
|
@ -30,10 +30,10 @@ endif
|
|||||||
# change to "no" to disable the options, or define them in the Makefile in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
MIDI_ENABLE = no # MIDI controls
|
MIDI_ENABLE = no # MIDI controls
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = qmk-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,12 +25,12 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
|
|
||||||
SPLIT_KEYBOARD = yes
|
SPLIT_KEYBOARD = yes
|
||||||
LAYOUTS = ortho_4x12 ortho_5x12
|
LAYOUTS = ortho_4x12 ortho_5x12
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = caterina
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = no # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,12 +25,12 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
|
|
||||||
SPLIT_KEYBOARD = yes # Enables split keyboard support
|
SPLIT_KEYBOARD = yes # Enables split keyboard support
|
||||||
|
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
@ -14,16 +14,16 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = yes # Audio output on port C6
|
AUDIO_ENABLE = yes # Audio output on port C6
|
||||||
|
@ -25,7 +25,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = yes # Audio output on port C6
|
AUDIO_ENABLE = yes # Audio output on port C6
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,9 +25,9 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,12 +25,12 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
|
|
||||||
SPLIT_KEYBOARD = yes # Use shared split_common
|
SPLIT_KEYBOARD = yes # Use shared split_common
|
||||||
RGBLIGHT_SPLIT = yes
|
RGBLIGHT_SPLIT = yes
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,9 +25,9 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
|
@ -14,9 +14,9 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
@ -14,9 +14,9 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
@ -24,7 +24,7 @@ MIDI_ENABLE = no # MIDI controls
|
|||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||||
|
@ -14,9 +14,9 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
MIDI_ENABLE = no # MIDI controls
|
MIDI_ENABLE = no # MIDI controls
|
||||||
|
@ -14,9 +14,9 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = full # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = full # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
MIDI_ENABLE = no # MIDI controls
|
MIDI_ENABLE = no # MIDI controls
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = caterina
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,9 +25,9 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
# MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
# MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
# CONSOLE_ENABLE = yes # Console for debug(+400)
|
# CONSOLE_ENABLE = yes # Console for debug
|
||||||
# COMMAND_ENABLE = yes # Commands for debug and configuration
|
# COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||||
# NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
|
# NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = no # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
@ -14,17 +14,17 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = caterina
|
|||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = caterina
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,11 +25,11 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
|
|
||||||
LAYOUTS = numpad_6x4
|
LAYOUTS = numpad_6x4
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = halfkay
|
|||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = caterina
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,12 +25,12 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
OLED_DRIVER_ENABLE = no
|
OLED_DRIVER_ENABLE = no
|
||||||
|
|
||||||
# Enable generic behavior for split boards
|
# Enable generic behavior for split boards
|
||||||
|
@ -14,17 +14,17 @@ BOOTLOADER = halfkay
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
|
@ -14,20 +14,20 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
RGBLIGHT_ENABLE = yes # Enable RGB underlighting support
|
RGBLIGHT_ENABLE = yes # Enable RGB underlighting support
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = lufa-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,9 +25,9 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
CONSOLE_ENABLE = yes # Console for debug
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,12 +25,12 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
|
|
||||||
# Supported layouts
|
# Supported layouts
|
||||||
LAYOUTS = tkl_ansi tkl_iso
|
LAYOUTS = tkl_ansi tkl_iso
|
||||||
|
@ -15,10 +15,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# change to "no" to disable the options, or define them in the Makefile in
|
# change to "no" to disable the options, or define them in the Makefile in
|
||||||
# the appropriate keymap folder that will get included automatically
|
# the appropriate keymap folder that will get included automatically
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = no # Audio control and System control
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
@ -25,12 +25,12 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|||||||
NKRO_ENABLE = no # USB Nkey Rollover
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
MIDI_ENABLE = no # MIDI support
|
||||||
UNICODE_ENABLE = no # Unicode
|
UNICODE_ENABLE = no # Unicode
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs
|
||||||
OLED_DRIVER_ENABLE = yes
|
OLED_DRIVER_ENABLE = yes
|
||||||
SPLIT_KEYBOARD = no
|
SPLIT_KEYBOARD = no
|
||||||
|
|
||||||
|
@ -14,10 +14,10 @@ BOOTLOADER = atmel-dfu
|
|||||||
# Build Options
|
# Build Options
|
||||||
# comment out to disable the options.
|
# comment out to disable the options.
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration
|
||||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
MOUSEKEY_ENABLE ?= yes # Mouse keys
|
||||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
EXTRAKEY_ENABLE ?= yes # Audio control and System control
|
||||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
CONSOLE_ENABLE ?= no # Console for debug
|
||||||
COMMAND_ENABLE ?= no # Commands for debug and configuration
|
COMMAND_ENABLE ?= no # Commands for debug and configuration
|
||||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
Loading…
Reference in New Issue
Block a user