diff --git a/keyboards/lfkeyboards/lfkpad/config.h b/keyboards/lfkeyboards/lfkpad/config.h index 1d8de837d..fb48297e5 100644 --- a/keyboards/lfkeyboards/lfkpad/config.h +++ b/keyboards/lfkeyboards/lfkpad/config.h @@ -15,31 +15,56 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" +/* USB Device descriptor parameter */ #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x6060 #define DEVICE_VER 0x0001 #define MANUFACTURER LFKeyboards #define PRODUCT LFKPad 21 -#define DESCRIPTION QMK keyboard firmware for LFKPad LFK_REV_STRING +#define DESCRIPTION QMK keyboard firmware for LFKPad -#define DIODE_DIRECTION COL2ROW +/* key matrix size */ #define MATRIX_ROWS 6 #define MATRIX_COLS 4 -#define MATRIX_ROW_PINS { D5, F4, F6, F7, C7, C6} -#define MATRIX_COL_PINS { F1, F0, D4, D6} -#define UNUSED_PINS { } -#define RGBLED_NUM 28 // Number of LEDs + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { D5, F4, F6, F7, C7, C6 } +#define MATRIX_COL_PINS { F1, F0, D4, D6 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +// #define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +// #define BACKLIGHT_LEVELS 3 #define RGB_DI_PIN C7 // Have to set it to something to get the ws2812 code to compile -#define RGBLIGHT_ANIMATIONS -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 +#ifdef RGB_DI_PIN +# define RGBLED_NUM 28 +# define RGBLIGHT_HUE_STEP 10 +# define RGBLIGHT_SAT_STEP 17 +# define RGBLIGHT_VAL_STEP 17 +# define RGBLIGHT_ANIMATIONS +#endif #define TAPPING_TERM 200 @@ -49,13 +74,16 @@ along with this program. If not, see . /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + /* * Force NKRO * @@ -89,6 +117,10 @@ along with this program. If not, see . * */ +/* key combination for magic key command */ +/* defined by default; to change, uncomment and set to the combination you want */ +// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) + /* control how magic key switches layers */ //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true @@ -98,8 +130,8 @@ along with this program. If not, see . //#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS //#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS //#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_HELP H +//#define MAGIC_KEY_HELP_ALT SLASH //#define MAGIC_KEY_DEBUG D //#define MAGIC_KEY_DEBUG_MATRIX X //#define MAGIC_KEY_DEBUG_KBD K @@ -107,9 +139,8 @@ along with this program. If not, see . //#define MAGIC_KEY_VERSION V //#define MAGIC_KEY_STATUS S //#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE //#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER0_ALT GRAVE //#define MAGIC_KEY_LAYER1 1 //#define MAGIC_KEY_LAYER2 2 //#define MAGIC_KEY_LAYER3 3 @@ -119,9 +150,11 @@ along with this program. If not, see . //#define MAGIC_KEY_LAYER7 7 //#define MAGIC_KEY_LAYER8 8 //#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_BOOTLOADER B +//#define MAGIC_KEY_BOOTLOADER_ALT ESC //#define MAGIC_KEY_LOCK CAPS //#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_EEPROM_CLEAR BSPACE //#define MAGIC_KEY_NKRO N //#define MAGIC_KEY_SLEEP_LED Z @@ -140,7 +173,63 @@ along with this program. If not, see . //#define NO_ACTION_LAYER //#define NO_ACTION_TAPPING //#define NO_ACTION_ONESHOT -//#define NO_ACTION_MACRO -//#define NO_ACTION_FUNCTION +/* disable these deprecated features by default */ +#ifndef LINK_TIME_OPTIMIZATION_ENABLE + #define NO_ACTION_MACRO + #define NO_ACTION_FUNCTION #endif +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +*/ + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/lfkeyboards/lfkpad/info.json b/keyboards/lfkeyboards/lfkpad/info.json index 71adb5d44..f5f41f5a7 100644 --- a/keyboards/lfkeyboards/lfkpad/info.json +++ b/keyboards/lfkeyboards/lfkpad/info.json @@ -1,12 +1,34 @@ { - "keyboard_name": "LFKPad", - "url": "", - "maintainer": "qmk", - "width": 4, - "height": 6, - "layouts": { - "LAYOUT_numpad_6x4": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"Tab", "x":1, "y":0}, {"label":"=", "x":2, "y":0}, {"label":"Fn", "x":3, "y":0}, {"label":"Num Lock", "x":0, "y":1}, {"label":"/", "x":1, "y":1}, {"label":"*", "x":2, "y":1}, {"label":"-", "x":3, "y":1}, {"label":"7", "x":0, "y":2}, {"label":"8", "x":1, "y":2}, {"label":"9", "x":2, "y":2}, {"label":"4", "x":0, "y":3}, {"label":"5", "x":1, "y":3}, {"label":"6", "x":2, "y":3}, {"label":"+", "x":3, "y":2, "h":2}, {"label":"1", "x":0, "y":4}, {"label":"2", "x":1, "y":4}, {"label":"3", "x":2, "y":4}, {"label":"0", "x":0, "y":5, "w":2}, {"label":".", "x":2, "y":5}, {"label":"Enter", "x":3, "y":4, "h":2}] + "keyboard_name": "LFKPad", + "url": "", + "maintainer": "qmk", + "width": 4, + "height": 6, + "layouts": { + "LAYOUT_numpad_6x4": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":0, "y":1}, + {"x":1, "y":1}, + {"x":2, "y":1}, + {"x":3, "y":1}, + {"x":0, "y":2}, + {"x":1, "y":2}, + {"x":2, "y":2}, + {"x":0, "y":3}, + {"x":1, "y":3}, + {"x":2, "y":3}, + {"x":3, "y":2, "h":2}, + {"x":0, "y":4}, + {"x":1, "y":4}, + {"x":2, "y":4}, + {"x":0, "y":5, "w":2}, + {"x":2, "y":5}, + {"x":3, "y":4, "h":2} + ] + } } - } } diff --git a/keyboards/lfkeyboards/lfkpad/keymaps/default/config.h b/keyboards/lfkeyboards/lfkpad/keymaps/default/config.h deleted file mode 100644 index 271f48d00..000000000 --- a/keyboards/lfkeyboards/lfkpad/keymaps/default/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -// place overrides here diff --git a/keyboards/lfkeyboards/lfkpad/keymaps/default/keymap.c b/keyboards/lfkeyboards/lfkpad/keymaps/default/keymap.c index 3e131b241..0aa720e40 100644 --- a/keyboards/lfkeyboards/lfkpad/keymaps/default/keymap.c +++ b/keyboards/lfkeyboards/lfkpad/keymaps/default/keymap.c @@ -1,41 +1,31 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_numpad_6x4( /* Base */ - KC_ESC, KC_TAB, KC_PEQL, MO(1), \ - KC_LNUM, KC_PSLS, KC_PAST, KC_PMNS, \ - KC_P7, KC_P8, KC_P9, \ - KC_P4, KC_P5, KC_P6, KC_PPLS, \ - KC_P1, KC_P2, KC_P3, \ - KC_P0, KC_PDOT, KC_PENT \ - ), + /* Base */ + [0] = LAYOUT_numpad_6x4( + KC_ESC, KC_TAB, KC_PEQL, MO(1), + KC_LNUM, KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, + KC_P0, KC_PDOT, KC_PENT + ), - [1] = LAYOUT_numpad_6x4( /* RGB */ - RGB_SAI, RGB_VAI, RGB_HUI, _______, \ - RGB_SAD, RGB_VAD, RGB_HUD, _______, \ - RGB_M_X, RGB_M_G, RGB_MOD, \ - RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_RMOD, \ - RGB_M_P, RGB_M_B, RGB_M_R, \ - XXXXXXX, XXXXXXX, RGB_TOG \ - ), + /* RGB */ + [1] = LAYOUT_numpad_6x4( + RGB_SAI, RGB_VAI, RGB_HUI, _______, + RGB_SAD, RGB_VAD, RGB_HUD, _______, + RGB_M_X, RGB_M_G, RGB_MOD, + RGB_M_SW,RGB_M_SN,RGB_M_K, RGB_RMOD, + RGB_M_P, RGB_M_B, RGB_M_R, + XXXXXXX, XXXXXXX, RGB_TOG + ) }; void matrix_init_user(void) { // This keymap only has a single base layer, so reset the default if needed - if(eeconfig_read_default_layer() > 1){ + if (eeconfig_read_default_layer() > 1) { eeconfig_update_default_layer(1); default_layer_set(1); } } - -void matrix_scan_user(void) { - -} - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; -} - -void led_set_user(uint8_t usb_led) { - -} diff --git a/keyboards/lfkeyboards/lfkpad/keymaps/default/readme.md b/keyboards/lfkeyboards/lfkpad/keymaps/default/readme.md index 6c48b8d0b..9c0dad030 100644 --- a/keyboards/lfkeyboards/lfkpad/keymaps/default/readme.md +++ b/keyboards/lfkeyboards/lfkpad/keymaps/default/readme.md @@ -1 +1 @@ -# The default keymap LFKPad 21 +# The default keymap for the LFKPad 21 diff --git a/keyboards/lfkeyboards/lfkpad/lfkpad.c b/keyboards/lfkeyboards/lfkpad/lfkpad.c index 232285c32..b91b7da67 100644 --- a/keyboards/lfkeyboards/lfkpad/lfkpad.c +++ b/keyboards/lfkeyboards/lfkpad/lfkpad.c @@ -1,112 +1,117 @@ -#include +#include "lfkpad.h" + +#include "quantum.h" + #include #include -#include "lfkpad.h" -#include "keymap.h" #include "issi.h" #include "TWIlib.h" #include "lighting.h" -#include "debug.h" -#include "quantum.h" uint16_t click_hz = CLICK_HZ; uint16_t click_time = CLICK_MS; uint8_t click_toggle = CLICK_ENABLED; - -void matrix_init_kb(void) -{ +void matrix_init_kb(void) { matrix_init_user(); + #ifndef AUDIO_ENABLE // If we're not using the audio pin, drive it low - sbi(DDRC, 6); - cbi(PORTC, 6); + setPinOutput(C6); + writePinLow(C6); #endif #ifdef ISSI_ENABLE issi_init(); #endif + #ifdef WATCHDOG_ENABLE // This is done after turning the layer LED red, if we're caught in a loop // we should get a flashing red light wdt_enable(WDTO_500MS); #endif - } -void matrix_scan_kb(void) -{ +void matrix_scan_kb(void) { #ifdef WATCHDOG_ENABLE wdt_reset(); #endif + #ifdef ISSI_ENABLE // switch/underglow lighting update static uint32_t issi_device = 0; static uint32_t twi_last_ready = 0; - if(twi_last_ready > 1000){ - // Its been way too long since the last ISSI update, reset the I2C bus and start again + + if (twi_last_ready > 1000) { + // It's been way too long since the last ISSI update, reset the I2C bus and start again dprintf("TWI failed to recover, TWI re-init\n"); twi_last_ready = 0; TWIInit(); force_issi_refresh(); } - if(isTWIReady()){ + + if (isTWIReady()) { twi_last_ready = 0; // If the i2c bus is available, kick off the issi update, alternate between devices update_issi(issi_device, issi_device); - if(issi_device){ + + if (issi_device) { issi_device = 0; - }else{ + } else { issi_device = 3; } - }else{ + } else { twi_last_ready++; } #endif + matrix_scan_user(); } -void click(uint16_t freq, uint16_t duration){ +void click(uint16_t freq, uint16_t duration) { #ifdef AUDIO_ENABLE - if(freq >= 100 && freq <= 20000 && duration < 100){ + if (freq >= 100 && freq <= 20000 && duration < 100) { play_note(freq, 10); - for (uint16_t i = 0; i < duration; i++){ + + for (uint16_t i = 0; i < duration; i++) { _delay_ms(1); } + stop_all_notes(); } #endif } -bool process_record_kb(uint16_t keycode, keyrecord_t* record) -{ - if (click_toggle && record->event.pressed){ +bool process_record_kb(uint16_t keycode, keyrecord_t* record) { + if (click_toggle && record->event.pressed) { click(click_hz, click_time); } + if (keycode == RESET) { reset_keyboard_kb(); - } else { } + return process_record_user(keycode, record); } -void action_function(keyrecord_t *event, uint8_t id, uint8_t opt) -{ +void action_function(keyrecord_t *event, uint8_t id, uint8_t opt) { #ifdef AUDIO_ENABLE int8_t sign = 1; #endif - if(id == LFK_ESC_TILDE){ + + if (id == LFK_ESC_TILDE) { // Send ~ on shift-esc void (*method)(uint8_t) = (event->event.pressed) ? &add_key : &del_key; - uint8_t shifted = get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)); - if(layer_state == 0){ + uint8_t shifted = get_mods() & MOD_MASK_SHIFT; + + if (layer_state == 0) { method(shifted ? KC_GRAVE : KC_ESCAPE); - }else{ + } else { method(shifted ? KC_ESCAPE : KC_GRAVE); } send_keyboard_report(); - }else if(event->event.pressed){ - switch(id){ + } else if (event->event.pressed) { + switch (id) { case LFK_SET_DEFAULT_LAYER: // set/save the current base layer to eeprom, falls through to LFK_CLEAR eeconfig_update_default_layer(1UL << opt); @@ -117,24 +122,24 @@ void action_function(keyrecord_t *event, uint8_t id, uint8_t opt) break; #ifdef AUDIO_ENABLE case LFK_CLICK_FREQ_LOWER: - sign = -1; // continue to next statement + sign = -1; // continue to next statement case LFK_CLICK_FREQ_HIGHER: click_hz += sign * 100; click(click_hz, click_time); break; case LFK_CLICK_TOGGLE: - if(click_toggle){ + if (click_toggle) { click_toggle = 0; click(4000, 100); click(1000, 100); - }else{ + } else { click_toggle = 1; click(1000, 100); click(4000, 100); } break; case LFK_CLICK_TIME_SHORTER: - sign = -1; // continue to next statement + sign = -1; // continue to next statement case LFK_CLICK_TIME_LONGER: click_time += sign; click(click_hz, click_time); @@ -144,22 +149,18 @@ void action_function(keyrecord_t *event, uint8_t id, uint8_t opt) } } -void reset_keyboard_kb(){ +void reset_keyboard_kb() { #ifdef WATCHDOG_ENABLE MCUSR = 0; wdt_disable(); wdt_reset(); #endif + reset_keyboard(); } -void led_set_kb(uint8_t usb_led) -{ - led_set_user(usb_led); -} - // LFK lighting info -const uint8_t rgb_matrices[] = {0, 1}; +const uint8_t rgb_matrices[] = { 0, 1 }; const uint8_t rgb_sequence[] = { 32, 1, 2, 3, 31, 30, 5, 6, @@ -172,5 +173,4 @@ const uint8_t rgb_sequence[] = { 4, 25, 13, 24, 20 - }; diff --git a/keyboards/lfkeyboards/lfkpad/lfkpad.h b/keyboards/lfkeyboards/lfkpad/lfkpad.h index a4c248e2a..0f34150db 100644 --- a/keyboards/lfkeyboards/lfkpad/lfkpad.h +++ b/keyboards/lfkeyboards/lfkpad/lfkpad.h @@ -1,23 +1,6 @@ -#ifndef LFKPAD_H -#define LFKPAD_H - -/* if the kb.h file exists (because we're running from qmkbuilder) include it */ -#if __has_include("kb.h") -#include "kb.h" -#endif +#pragma once #include "quantum.h" -#include "matrix.h" -#include - -#ifndef cbi -#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit)) -#endif - -#ifndef sbi -#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit)) -#endif - typedef struct RGB_Color { uint16_t red; @@ -57,7 +40,6 @@ void click(uint16_t freq, uint16_t duration); // readability #define ___ KC_NO - #define LAYOUT_numpad_6x4( \ k00, k01, k02, k03, \ k10, k11, k12, k13, \ @@ -73,5 +55,3 @@ void click(uint16_t freq, uint16_t duration); { k40, k41, k42, k43 }, \ { k50, ___, k52, ___ } \ } - -#endif //LFKPAD_H diff --git a/keyboards/lfkeyboards/lfkpad/readme.md b/keyboards/lfkeyboards/lfkpad/readme.md index 7dd8337e8..ce5e7f67b 100644 --- a/keyboards/lfkeyboards/lfkpad/readme.md +++ b/keyboards/lfkeyboards/lfkpad/readme.md @@ -1,28 +1,15 @@ -bluepad keyboard firmware -====================== +# LFKPad -## Quantum MK Firmware +![LFKPad](https://cdn11.bigcommerce.com/s-dvx2zpcx7r/images/stencil/500x659/products/118/385/img_0256__06462.1546304848.jpg) -For the full Quantum feature list, see [the parent readme.md](/docs/README.md). +Hotswap 21-key numpad PCB with USB-C, per-key RGB and underglow. -## Building +* Keyboard Maintainer: QMK community +* Hardware Supported: LFKPad HS21 PCB +* Hardware Availability: [LFKeyboards](https://www.lfkeyboards.com/lfkpad/) -Download or clone the whole firmware and navigate to the keyboards/bluepad folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file. +Make example for this keyboard (after setting up your build environment): -Depending on which keymap you would like to use, you will have to compile slightly differently. + make lfkeyboards/lfkpad:default -### Default - -To build with the default keymap, simply run `make`. - -### Other Keymaps - -Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files. - -To build the firmware binary hex file with a keymap just do `make` with `keymap` option like: - -``` -$ make keymap=[default|jack|] -``` - -Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/` +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/lfkeyboards/lfkpad/rules.mk b/keyboards/lfkeyboards/lfkpad/rules.mk index 1529f8986..aca77f562 100644 --- a/keyboards/lfkeyboards/lfkpad/rules.mk +++ b/keyboards/lfkeyboards/lfkpad/rules.mk @@ -11,26 +11,29 @@ MCU = atmega32u4 # ATmega328P USBasp BOOTLOADER = atmel-dfu -LAYOUTS = numpad_6x4 +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not qmk base +MIDI_ENABLE = no # MIDI support +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration -MOUSEKEY_ENABLE = no # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. -RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not qmk base -SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -TAP_DANCE_ENABLE = no - -ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled -WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan isn't run every 250ms +ISSI_ENABLE = yes # If the I2C pullup resistors aren't installed this must be disabled +WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan() isn't run every 250ms SRC = TWIlib.c issi.c lighting.c @@ -41,3 +44,5 @@ endif ifeq ($(strip $(WATCHDOG_ENABLE)), yes) TMK_COMMON_DEFS += -DWATCHDOG_ENABLE endif + +LAYOUTS = numpad_6x4