[Core] Cleanup rules.mk for F303 keyboards (#7306)

* Cleanup rules.mk for F303 keyboards

* Fix small typo

keyboards/1upkeyboards/sweet16/v1/rules.mk

@@ -1,5 +1,17 @@
+# MCU name
 MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = caterina
-LINK_TIME_OPTIMIZATION_ENABLE=yes
+
 RGBLIGHT_ENABLE = yes
 BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
+
+LINK_TIME_OPTIMIZATION_ENABLE = yes

keyboards/1upkeyboards/sweet16/v2/promicro/rules.mk

@@ -1,6 +1,15 @@
+# MCU name
 MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
 BOOTLOADER = caterina
-LINK_TIME_OPTIMIZATION_ENABLE=yes
 
 ## Features
 CONSOLE_ENABLE = yes
@@ -8,3 +17,5 @@ CONSOLE_ENABLE = yes
 ## On a Pro Micro you have to choose between underglow and the rotary encoder.
 RGBLIGHT_ENABLE = no
 ENCODER_ENABLE = yes
+
+LINK_TIME_OPTIMIZATION_ENABLE = yes

keyboards/1upkeyboards/sweet16/v2/proton_c/rules.mk

@@ -1,3 +1,4 @@
+# MCU name
 MCU = STM32F303
 
 ## Features

keyboards/boston_meetup/2019/rules.mk

@@ -1,6 +1,4 @@
-# project specific files
+# MCU name
-
-# Cortex version
 MCU = STM32F303
 
 # Build Options

keyboards/ckeys/thedora/rules.mk

@@ -1,3 +1,4 @@
+# MCU name
 MCU = STM32F303
 
 # Build Options

keyboards/clueboard/60/rules.mk

@@ -1,41 +1,5 @@
-# project specific files
+# MCU name
-SRC =	led.c
+MCU = STM32F303
-LAYOUTS += 60_ansi 60_ansi_split_bs_rshift 60_iso
-
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F3xx
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F303xC
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f3xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = GENERIC_STM32_F303XC
-
-# Cortex version
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-
-USE_FPU = yes
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-OPT_DEFS =
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -p DF11 -v 0483
 
 # Build Options
 #   comment out to disable the options.
@@ -48,3 +12,7 @@ CONSOLE_ENABLE = yes	  # Console for debug
 COMMAND_ENABLE = no     # Commands for debug and configuration
 NKRO_ENABLE = yes	      # USB Nkey Rollover
 AUDIO_ENABLE = yes
+
+# project specific files
+SRC =	led.c
+LAYOUTS += 60_ansi 60_ansi_split_bs_rshift 60_iso

keyboards/clueboard/66/rev4/rules.mk

@@ -1,19 +1,5 @@
-LAYOUTS = 66_ansi 66_iso
+# MCU name
-
+MCU = STM32F303
-## chip/board settings
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F3xx
-MCU_LDSCRIPT = STM32F303xC
-MCU_STARTUP = stm32f3xx
-BOARD = GENERIC_STM32_F303XC
-MCU  = cortex-m4
-ARMV = 7
-USE_FPU = yes
-OPT_DEFS =
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -p DF11 -v 0483
 
 # Build Options
 #   comment out to disable the options.
@@ -31,3 +17,5 @@ MIDI_ENABLE = no        # MIDI controls
 UNICODE_ENABLE = no     # Unicode
 BLUETOOTH_ENABLE = no   # Enable Bluetooth with the Adafruit EZ-Key HID
 AUDIO_ENABLE = yes
+
+LAYOUTS = 66_ansi 66_iso

keyboards/clueboard/66_hotswap/gen1/rules.mk

@@ -1,43 +1,5 @@
-# project specific files
+# MCU name
-SRC =	led.c
+MCU = STM32F303
-LAYOUTS += 66_ansi
-
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F3xx
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F303xC
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f3xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = GENERIC_STM32_F303XC
-
-# Cortex version
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-
-USE_FPU = yes
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
-OPT_DEFS =
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -p DF11 -v 0483
 
 # LED Configuration
 LED_MATRIX_ENABLE = IS31FL3731
@@ -57,3 +19,7 @@ NKRO_ENABLE = yes	    # USB Nkey Rollover
 #CUSTOM_MATRIX = yes # Custom matrix file
 AUDIO_ENABLE = yes
 # SERIAL_LINK_ENABLE = yes
+
+# project specific files
+SRC =	led.c
+LAYOUTS += 66_ansi

keyboards/clueboard/california/rules.mk

@@ -1,3 +1,4 @@
+# MCU name
 MCU = STM32F303
 
 ## Features

keyboards/dztech/dz60rgb/rules.mk

@@ -1,6 +1,6 @@
+# MCU name
 MCU = STM32F303
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+
-DFU_SUFFIX_ARGS = -p DF11 -v 0483
 BACKLIGHT_ENABLE = no
 BOOTMAGIC_ENABLE = lite           # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes              # Mouse keys

keyboards/dztech/dz60rgb_ansi/rules.mk

@@ -1,6 +1,6 @@
+# MCU name
 MCU = STM32F303
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+
-DFU_SUFFIX_ARGS = -p DF11 -v 0483
 BACKLIGHT_ENABLE = no
 BOOTMAGIC_ENABLE = lite           # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes              # Mouse keys

keyboards/dztech/dz65rgb/rules.mk

@@ -1,6 +1,6 @@
+# MCU name
 MCU = STM32F303
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+
-DFU_SUFFIX_ARGS = -p DF11 -v 0483
 BACKLIGHT_ENABLE = no
 BOOTMAGIC_ENABLE = lite           # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes              # Mouse keys

keyboards/hadron/rules.mk

@@ -1,2 +1 @@
-
 DEFAULT_FOLDER = hadron/ver2

keyboards/hadron/ver3/boards/GENERIC_STM32_F303XC/board.c

@@ -1,126 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-/**
- * @brief   PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- *          This variable is used by the HAL when initializing the PAL driver.
- */
-const PALConfig pal_default_config = {
-#if STM32_HAS_GPIOA
-  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
-   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
-#endif
-#if STM32_HAS_GPIOB
-  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
-   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
-#endif
-#if STM32_HAS_GPIOC
-  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
-   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
-#endif
-#if STM32_HAS_GPIOD
-  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
-   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
-#endif
-#if STM32_HAS_GPIOE
-  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
-   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
-#endif
-#if STM32_HAS_GPIOF
-  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
-   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
-#endif
-#if STM32_HAS_GPIOG
-  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
-   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
-#endif
-#if STM32_HAS_GPIOH
-  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
-   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
-#endif
-#if STM32_HAS_GPIOI
-  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
-   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
-#endif
-};
-#endif
-
-void enter_bootloader_mode_if_requested(void);
-
-/**
- * @brief   Early initialization code.
- * @details This initialization must be performed just after stack setup
- *          and before any other initialization.
- */
-void __early_init(void) {
-  enter_bootloader_mode_if_requested();
-  stm32_clock_init();
-}
-
-#if HAL_USE_SDC || defined(__DOXYGEN__)
-/**
- * @brief   SDC card detection.
- */
-bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
-
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return true;
-}
-
-/**
- * @brief   SDC card write protection detection.
- */
-bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
-
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return false;
-}
-#endif /* HAL_USE_SDC */
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief   MMC_SPI card detection.
- */
-bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return true;
-}
-
-/**
- * @brief   MMC_SPI card write protection detection.
- */
-bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return false;
-}
-#endif
-
-/**
- * @brief   Board-specific initialization code.
- * @todo    Add your board-specific code, if any.
- */
-void boardInit(void) {
-}

keyboards/hadron/ver3/boards/GENERIC_STM32_F303XC/board.mk

@@ -1,5 +0,0 @@
-# List of all the board related files.
-BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC/board.c
-
-# Required include directories
-BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC

keyboards/hadron/ver3/bootloader_defs.h

@@ -1,7 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here:
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800

keyboards/hadron/ver3/rules.mk

@@ -1,6 +1,4 @@
-# projecct specific files
+# MCU name
-
-# Cortex version
 MCU = STM32F303
 
 # Build Options

keyboards/handwired/co60/rev6/rules.mk

@@ -1,40 +1,5 @@
-# project specific files
+# MCU name
-
+MCU = STM32F303
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F3xx
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F303xC
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f3xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = GENERIC_STM32_F303XC
-
-# Cortex version
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-
-USE_FPU = yes
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -v 0483 -p df11
 
 # Code for backlight breathing:
 SRC += led.c

keyboards/handwired/co60/rev7/rules.mk

@@ -1,40 +1,5 @@
-# project specific files
+# MCU name
-
+MCU = STM32F303
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F3xx
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F303xC
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f3xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = GENERIC_STM32_F303XC
-
-# Cortex version
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-
-USE_FPU = yes
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -v 0483 -p df11
 
 # Code for backlight breathing:
 SRC += led.c

keyboards/handwired/steamvan/rev1/rules.mk

@@ -1,40 +1,5 @@
-# project specific files
+# MCU name
-
+MCU = STM32F303
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F3xx
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F303xC
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f3xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = GENERIC_STM32_F303XC
-
-# Cortex version
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-
-USE_FPU = yes
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
-
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -v 0483 -p df11
 
 # Code for backlight breathing:
 SRC += led.c

keyboards/handwired/wulkan/rules.mk

@@ -1,3 +1,4 @@
+# MCU name
 MCU = STM32F303
 
 # Build Options

keyboards/hs60/v2/boards/GENERIC_STM32_F303XC/board.c

@@ -1,126 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-/**
- * @brief   PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- *          This variable is used by the HAL when initializing the PAL driver.
- */
-const PALConfig pal_default_config = {
-#if STM32_HAS_GPIOA
-  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
-   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
-#endif
-#if STM32_HAS_GPIOB
-  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
-   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
-#endif
-#if STM32_HAS_GPIOC
-  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
-   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
-#endif
-#if STM32_HAS_GPIOD
-  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
-   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
-#endif
-#if STM32_HAS_GPIOE
-  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
-   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
-#endif
-#if STM32_HAS_GPIOF
-  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
-   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
-#endif
-#if STM32_HAS_GPIOG
-  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
-   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
-#endif
-#if STM32_HAS_GPIOH
-  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
-   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
-#endif
-#if STM32_HAS_GPIOI
-  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
-   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
-#endif
-};
-#endif
-
-void enter_bootloader_mode_if_requested(void);
-
-/**
- * @brief   Early initialization code.
- * @details This initialization must be performed just after stack setup
- *          and before any other initialization.
- */
-void __early_init(void) {
-  enter_bootloader_mode_if_requested();
-  stm32_clock_init();
-}
-
-#if HAL_USE_SDC || defined(__DOXYGEN__)
-/**
- * @brief   SDC card detection.
- */
-bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
-
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return true;
-}
-
-/**
- * @brief   SDC card write protection detection.
- */
-bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
-
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return false;
-}
-#endif /* HAL_USE_SDC */
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief   MMC_SPI card detection.
- */
-bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return true;
-}
-
-/**
- * @brief   MMC_SPI card write protection detection.
- */
-bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return false;
-}
-#endif
-
-/**
- * @brief   Board-specific initialization code.
- * @todo    Add your board-specific code, if any.
- */
-void boardInit(void) {
-}

keyboards/hs60/v2/boards/GENERIC_STM32_F303XC/board.mk

@@ -1,5 +0,0 @@
-# List of all the board related files.
-BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC/board.c
-
-# Required include directories
-BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC

keyboards/hs60/v2/bootloader_defs.h

@@ -1,7 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here:
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800

keyboards/hs60/v2/rules.mk

@@ -1,52 +1,11 @@
-# project specific files
+# MCU name
-SRC =	keyboards/wilba_tech/wt_main.c \
+MCU = STM32F303
-		keyboards/wilba_tech/wt_rgb_backlight.c \
-		drivers/issi/is31fl3733.c \
-		quantum/color.c \
-		drivers/arm/i2c_master.c
-
-## chip/board settings
-#   the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F3xx
-
-# Linker script to use
-#   it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F303xC
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f3xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = GENERIC_STM32_F303XC
-
-# Cortex version
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-
-USE_FPU = yes
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
-OPT_DEFS =
 
 # Do not put the microcontroller into power saving mode
 # when we get USB suspend event. We want it to keep updating
 # backlight effects.
 OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
 
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -p DF11 -v 0483
-
 # Build Options
 #   comment out to disable the options.
 #
@@ -67,3 +26,10 @@ DYNAMIC_KEYMAP_ENABLE = no
 CIE1931_CURVE = yes
 
 LAYOUTS = 60_ansi 60_iso
+
+# project specific files
+SRC =	keyboards/wilba_tech/wt_main.c \
+		keyboards/wilba_tech/wt_rgb_backlight.c \
+		drivers/issi/is31fl3733.c \
+		quantum/color.c \
+		drivers/arm/i2c_master.c

keyboards/kbdfans/kbd67/mkiirgb/rules.mk

@@ -1,6 +1,6 @@
+# MCU name
 MCU = STM32F303
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
+
-DFU_SUFFIX_ARGS = -p DF11 -v 0483
 BACKLIGHT_ENABLE = no
 BOOTMAGIC_ENABLE = lite           # Virtual DIP switch configuration
 MOUSEKEY_ENABLE = yes              # Mouse keys

keyboards/nk65/boards/GENERIC_STM32_F303XC/board.c

@@ -1,126 +0,0 @@
-/*
-    ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
-
-    Licensed under the Apache License, Version 2.0 (the "License");
-    you may not use this file except in compliance with the License.
-    You may obtain a copy of the License at
-
-        http://www.apache.org/licenses/LICENSE-2.0
-
-    Unless required by applicable law or agreed to in writing, software
-    distributed under the License is distributed on an "AS IS" BASIS,
-    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-    See the License for the specific language governing permissions and
-    limitations under the License.
-*/
-
-#include "hal.h"
-
-#if HAL_USE_PAL || defined(__DOXYGEN__)
-/**
- * @brief   PAL setup.
- * @details Digital I/O ports static configuration as defined in @p board.h.
- *          This variable is used by the HAL when initializing the PAL driver.
- */
-const PALConfig pal_default_config = {
-#if STM32_HAS_GPIOA
-  {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
-   VAL_GPIOA_ODR,   VAL_GPIOA_AFRL,   VAL_GPIOA_AFRH},
-#endif
-#if STM32_HAS_GPIOB
-  {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
-   VAL_GPIOB_ODR,   VAL_GPIOB_AFRL,   VAL_GPIOB_AFRH},
-#endif
-#if STM32_HAS_GPIOC
-  {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
-   VAL_GPIOC_ODR,   VAL_GPIOC_AFRL,   VAL_GPIOC_AFRH},
-#endif
-#if STM32_HAS_GPIOD
-  {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
-   VAL_GPIOD_ODR,   VAL_GPIOD_AFRL,   VAL_GPIOD_AFRH},
-#endif
-#if STM32_HAS_GPIOE
-  {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
-   VAL_GPIOE_ODR,   VAL_GPIOE_AFRL,   VAL_GPIOE_AFRH},
-#endif
-#if STM32_HAS_GPIOF
-  {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
-   VAL_GPIOF_ODR,   VAL_GPIOF_AFRL,   VAL_GPIOF_AFRH},
-#endif
-#if STM32_HAS_GPIOG
-  {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
-   VAL_GPIOG_ODR,   VAL_GPIOG_AFRL,   VAL_GPIOG_AFRH},
-#endif
-#if STM32_HAS_GPIOH
-  {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
-   VAL_GPIOH_ODR,   VAL_GPIOH_AFRL,   VAL_GPIOH_AFRH},
-#endif
-#if STM32_HAS_GPIOI
-  {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
-   VAL_GPIOI_ODR,   VAL_GPIOI_AFRL,   VAL_GPIOI_AFRH}
-#endif
-};
-#endif
-
-void enter_bootloader_mode_if_requested(void);
-
-/**
- * @brief   Early initialization code.
- * @details This initialization must be performed just after stack setup
- *          and before any other initialization.
- */
-void __early_init(void) {
-  enter_bootloader_mode_if_requested();
-  stm32_clock_init();
-}
-
-#if HAL_USE_SDC || defined(__DOXYGEN__)
-/**
- * @brief   SDC card detection.
- */
-bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
-
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return true;
-}
-
-/**
- * @brief   SDC card write protection detection.
- */
-bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
-
-  (void)sdcp;
-  /* TODO: Fill the implementation.*/
-  return false;
-}
-#endif /* HAL_USE_SDC */
-
-#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
-/**
- * @brief   MMC_SPI card detection.
- */
-bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return true;
-}
-
-/**
- * @brief   MMC_SPI card write protection detection.
- */
-bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
-
-  (void)mmcp;
-  /* TODO: Fill the implementation.*/
-  return false;
-}
-#endif
-
-/**
- * @brief   Board-specific initialization code.
- * @todo    Add your board-specific code, if any.
- */
-void boardInit(void) {
-}

keyboards/nk65/boards/GENERIC_STM32_F303XC/board.mk

@@ -1,5 +0,0 @@
-# List of all the board related files.
-BOARDSRC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC/board.c
-
-# Required include directories
-BOARDINC = $(BOARD_PATH)/boards/GENERIC_STM32_F303XC

keyboards/nk65/bootloader_defs.h

@@ -1,7 +0,0 @@
-/* Address for jumping to bootloader on STM32 chips. */
-/* It is chip dependent, the correct number can be looked up here:
- * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
- * This also requires a patch to chibios:
- *  <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
- */
-#define STM32_BOOTLOADER_ADDRESS 0x1FFFD800

keyboards/nk65/rules.mk

@@ -1,52 +1,11 @@
-# project specific files
+# MCU name
-SRC =	keyboards/wilba_tech/wt_main.c \
+MCU = STM32F303
-		keyboards/wilba_tech/wt_rgb_backlight.c \
-		drivers/issi/is31fl3733.c \
-		quantum/color.c \
-		drivers/arm/i2c_master.c
-
-## chip/board settings
-#   the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-MCU_FAMILY = STM32
-MCU_SERIES = STM32F3xx
-
-# Linker script to use
-#   it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-MCU_LDSCRIPT = STM32F303xC
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
-MCU_STARTUP = stm32f3xx
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-BOARD = GENERIC_STM32_F303XC
-
-# Cortex version
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-ARMV = 7
-
-USE_FPU = yes
-
-# Vector table for application
-# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
-# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-# OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000
-OPT_DEFS =
 
 # Do not put the microcontroller into power saving mode
 # when we get USB suspend event. We want it to keep updating
 # backlight effects.
 OPT_DEFS += -DNO_SUSPEND_POWER_DOWN
 
-# Options to pass to dfu-util when flashing
-DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave
-DFU_SUFFIX_ARGS = -p DF11 -v 0483
-
 # Build Options
 #   comment out to disable the options.
 #
@@ -67,3 +26,10 @@ DYNAMIC_KEYMAP_ENABLE = no
 CIE1931_CURVE = yes
 
 LAYOUTS = 65_ansi
+
+# project specific files
+SRC =	keyboards/wilba_tech/wt_main.c \
+		keyboards/wilba_tech/wt_rgb_backlight.c \
+		drivers/issi/is31fl3733.c \
+		quantum/color.c \
+		drivers/arm/i2c_master.c

keyboards/planck/ez/rules.mk

@@ -1,4 +1,4 @@
-# Cortex version
+# MCU name
 MCU = STM32F303
 
 # Build Options

keyboards/planck/rev6/rules.mk

@@ -1,7 +1,4 @@
-# project specific files
+# MCU name
-LAYOUTS += ortho_4x12
-
-# Cortex version
 MCU = STM32F303
 
 # Build Options

keyboards/preonic/rev3/rules.mk

@@ -1,4 +1,4 @@
-# Cortex version
+# MCU name
 MCU = STM32F303
 
 # Build Options

quantum/mcu_selection.mk

@@ -7,15 +7,15 @@ ifneq ($(findstring STM32F303, $(MCU)),)
 
   # Linker script to use
   # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-  #   or <this_dir>/ld/
+  #   or <keyboard_dir>/ld/
   MCU_LDSCRIPT ?= STM32F303xC
 
   # Startup code to use
   #  - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/
   MCU_STARTUP ?= stm32f3xx
 
-  # Board: it should exist either in <chibios>/os/hal/boards/
+  # Board: it should exist either in <chibios>/os/hal/boards/,
-  #  or <this_dir>/boards
+  # <keyboard_dir>/boards/, or drivers/boards/
   BOARD ?= GENERIC_STM32_F303XC
 
   # Cortex version
@@ -27,7 +27,7 @@ ifneq ($(findstring STM32F303, $(MCU)),)
   USE_FPU = yes
 
   # Vector table for application
-  # 0x00000000-0x00001000 area is occupied by bootlaoder.*/
+  # 0x00000000-0x00001000 area is occupied by bootloader.*/
   # The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
   # OPT_DEFS = -DCORTEX_VTOR_INIT=0x08005000