diff --git a/Dockerfile b/Dockerfile index 744ded857..c42bbeb32 100644 --- a/Dockerfile +++ b/Dockerfile @@ -25,5 +25,4 @@ ENV subproject=ez ENV keymap=default VOLUME /qmk -WORKDIR /qmk -CMD make clean ; make keyboard=${keyboard} subproject=${subproject} keymap=${keymap} +WORKDIR /qmk \ No newline at end of file diff --git a/build_keyboard.mk b/build_keyboard.mk index 055ce632a..ce505de12 100644 --- a/build_keyboard.mk +++ b/build_keyboard.mk @@ -131,6 +131,14 @@ ifndef CUSTOM_MATRIX SRC += $(QUANTUM_DIR)/matrix.c endif +ifeq ($(strip $(API_SYSEX_ENABLE)), yes) + OPT_DEFS += -DAPI_SYSEX_ENABLE + SRC += $(QUANTUM_DIR)/api/api_sysex.c + OPT_DEFS += -DAPI_ENABLE + SRC += $(QUANTUM_DIR)/api.c + MIDI_ENABLE=yes +endif + ifeq ($(strip $(MIDI_ENABLE)), yes) OPT_DEFS += -DMIDI_ENABLE SRC += $(QUANTUM_DIR)/process_keycode/process_midi.c @@ -174,6 +182,12 @@ ifeq ($(strip $(TAP_DANCE_ENABLE)), yes) SRC += $(QUANTUM_DIR)/process_keycode/process_tap_dance.c endif +ifeq ($(strip $(PRINTING_ENABLE)), yes) + OPT_DEFS += -DPRINTING_ENABLE + SRC += $(QUANTUM_DIR)/process_keycode/process_printer.c + SRC += $(TMK_DIR)/protocol/serial_uart.c +endif + ifeq ($(strip $(SERIAL_LINK_ENABLE)), yes) SRC += $(patsubst $(QUANTUM_PATH)/%,%,$(SERIAL_SRC)) OPT_DEFS += $(SERIAL_DEFS) diff --git a/common.mk b/common.mk index 18751cd5a..c4b9394a2 100644 --- a/common.mk +++ b/common.mk @@ -23,4 +23,5 @@ COMMON_VPATH += $(QUANTUM_PATH) COMMON_VPATH += $(QUANTUM_PATH)/keymap_extras COMMON_VPATH += $(QUANTUM_PATH)/audio COMMON_VPATH += $(QUANTUM_PATH)/process_keycode +COMMON_VPATH += $(QUANTUM_PATH)/api COMMON_VPATH += $(SERIAL_PATH) \ No newline at end of file diff --git a/keyboards/amj60/config.h b/keyboards/amj60/config.h index d98e0e9f2..7c06f9a6c 100644 --- a/keyboards/amj60/config.h +++ b/keyboards/amj60/config.h @@ -67,7 +67,7 @@ along with this program. If not, see . */ #define RGB_DI_PIN E2 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 8 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/clueboard/rev1/config.h b/keyboards/clueboard/rev1/config.h index 8c9497232..f40876ffb 100644 --- a/keyboards/clueboard/rev1/config.h +++ b/keyboards/clueboard/rev1/config.h @@ -26,7 +26,7 @@ /* Underlight configuration */ #define RGB_DI_PIN B2 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 14 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/clueboard/rev2/config.h b/keyboards/clueboard/rev2/config.h index 15ca4ece8..8435fd02b 100644 --- a/keyboards/clueboard/rev2/config.h +++ b/keyboards/clueboard/rev2/config.h @@ -30,7 +30,7 @@ /* Underlight configuration */ #define RGB_DI_PIN D7 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 14 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/cluecard/config.h b/keyboards/cluecard/config.h index 765347b13..6520eb557 100644 --- a/keyboards/cluecard/config.h +++ b/keyboards/cluecard/config.h @@ -140,7 +140,7 @@ along with this program. If not, see . /* Underlight configuration */ #define RGB_DI_PIN E6 -//#define RGBLIGHT_TIMER +//#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 4 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/cluecard/keymaps/rgb_effects/config.h b/keyboards/cluecard/keymaps/rgb_effects/config.h index e88847df4..c6c9342c8 100644 --- a/keyboards/cluecard/keymaps/rgb_effects/config.h +++ b/keyboards/cluecard/keymaps/rgb_effects/config.h @@ -4,7 +4,7 @@ #include "../../config.h" // place overrides here -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLIGHT_EFFECT_SNAKE_LENGTH 3 #define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2 #define RGBLIGHT_EFFECT_KNIGHT_OFFSET 2 diff --git a/keyboards/cluepad/config.h b/keyboards/cluepad/config.h index bae05fade..bd64dfd27 100644 --- a/keyboards/cluepad/config.h +++ b/keyboards/cluepad/config.h @@ -70,7 +70,7 @@ along with this program. If not, see . /* Underlight configuration */ #define RGB_DI_PIN F6 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 4 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/ergodox/ez/Makefile b/keyboards/ergodox/ez/Makefile index 191c6bb66..9b6121e2c 100644 --- a/keyboards/ergodox/ez/Makefile +++ b/keyboards/ergodox/ez/Makefile @@ -1,3 +1,8 @@ +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +COMMAND_ENABLE = no # Commands for debug and configuration +RGBLIGHT_ENABLE ?= yes +MIDI_ENABLE ?= yes + ifndef MAKEFILE_INCLUDED include ../../../Makefile -endif \ No newline at end of file +endif diff --git a/keyboards/ergodox/ez/config.h b/keyboards/ergodox/ez/config.h index 084a044ee..c2750a321 100644 --- a/keyboards/ergodox/ez/config.h +++ b/keyboards/ergodox/ez/config.h @@ -21,6 +21,8 @@ along with this program. If not, see . #include "../config.h" +#include "config_common.h" + /* USB Device descriptor parameter */ #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x1307 @@ -39,6 +41,17 @@ along with this program. If not, see . #define LED_BRIGHTNESS_LO 15 #define LED_BRIGHTNESS_HI 255 +/* ws2812 RGB LED */ +#define RGB_DI_PIN D7 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 15 // Number of LEDs +#define RGBLIGHT_HUE_STEP 12 +#define RGBLIGHT_SAT_STEP 255 +#define RGBLIGHT_VAL_STEP 12 + +#define RGB_MIDI +#define RGBW_BB_TWI + /* Set 0 if debouncing isn't needed */ #define DEBOUNCE 5 diff --git a/keyboards/ergodox/ez/ez.c b/keyboards/ergodox/ez/ez.c index ddb8ff0cf..039e4c6bb 100644 --- a/keyboards/ergodox/ez/ez.c +++ b/keyboards/ergodox/ez/ez.c @@ -16,10 +16,10 @@ void matrix_init_kb(void) { // unused pins - C7, D4, D5, D7, E6 // set as input with internal pull-ip enabled DDRC &= ~(1<<7); - DDRD &= ~(1<<7 | 1<<5 | 1<<4); + DDRD &= ~(1<<5 | 1<<4); DDRE &= ~(1<<6); PORTC |= (1<<7); - PORTD |= (1<<7 | 1<<5 | 1<<4); + PORTD |= (1<<5 | 1<<4); PORTE |= (1<<6); ergodox_blink_all_leds(); @@ -51,6 +51,10 @@ uint8_t init_mcp23018(void) { mcp23018_status = 0x20; // I2C subsystem + + uint8_t sreg_prev; + sreg_prev=SREG; + cli(); if (i2c_initialized == 0) { i2c_init(); // on pins D(1,0) i2c_initialized++; @@ -79,6 +83,8 @@ uint8_t init_mcp23018(void) { out: i2c_stop(); + SREG=sreg_prev; + return mcp23018_status; } diff --git a/keyboards/ergodox/ez/matrix.c b/keyboards/ergodox/ez/matrix.c index a19bab90b..43f515259 100644 --- a/keyboards/ergodox/ez/matrix.c +++ b/keyboards/ergodox/ez/matrix.c @@ -121,7 +121,7 @@ void matrix_init(void) matrix_scan_count = 0; #endif - matrix_init_kb(); + matrix_init_quantum(); } diff --git a/keyboards/ergodox/ez/rules.mk b/keyboards/ergodox/ez/rules.mk index a9715beb8..893cfa7a8 100644 --- a/keyboards/ergodox/ez/rules.mk +++ b/keyboards/ergodox/ez/rules.mk @@ -72,6 +72,8 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512 # SLEEP_LED_ENABLE = no +API_SYSEX_ENABLE ?= yes +RGBLIGHT_ENABLE ?= yes ifndef QUANTUM_DIR include ../../../Makefile diff --git a/keyboards/ergodox/infinity/rules.mk b/keyboards/ergodox/infinity/rules.mk index ccb735a48..473a6dfec 100644 --- a/keyboards/ergodox/infinity/rules.mk +++ b/keyboards/ergodox/infinity/rules.mk @@ -63,6 +63,8 @@ VISUALIZER_ENABLE ?= no #temporarily disabled to make everything compile LCD_ENABLE ?= yes LED_ENABLE ?= yes LCD_BACKLIGHT_ENABLE ?= yes +MIDI_ENABLE = no +RGBLIGHT_ENABLE = no ifndef QUANTUM_DIR include ../../../Makefile diff --git a/keyboards/ergodox/keymaps/bepo/Makefile b/keyboards/ergodox/keymaps/bepo/Makefile new file mode 100644 index 000000000..b673c5ce5 --- /dev/null +++ b/keyboards/ergodox/keymaps/bepo/Makefile @@ -0,0 +1,9 @@ +# Having a file like this allows you to override Makefile definitions +# for your own particular keymap + +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +COMMAND_ENABLE = no # Commands for debug and configuration + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/ergodox/keymaps/bepo/bepo.png b/keyboards/ergodox/keymaps/bepo/bepo.png index 3df7aa609..54992f5ae 100644 Binary files a/keyboards/ergodox/keymaps/bepo/bepo.png and b/keyboards/ergodox/keymaps/bepo/bepo.png differ diff --git a/keyboards/ergodox/keymaps/bepo/keymap.c b/keyboards/ergodox/keymaps/bepo/keymap.c index 2d88fc10e..05250ee6a 100644 --- a/keyboards/ergodox/keymaps/bepo/keymap.c +++ b/keyboards/ergodox/keymaps/bepo/keymap.c @@ -1,21 +1,23 @@ #include "ergodox.h" -#include "debug.h" -#include "action_layer.h" #include "keymap_bepo.h" +#include "keymap_french.h" -#define BASE 0 // default layer -#define QWER 1 // qwerty compat layer -#define SQWER 2 // shifted qwerty compat layer -#define AQWER 3 // alted qwerty compat layer -#define FNAV 4 // function / navigation keys -#define NUM 5 // numeric keypad keys -#define MSE 6 // mouse keys +// keymaps +#define BEPO 0 // default layer, for bepo compatible systems +#define QW_B 1 // bepo to qwerty base compat layer, for qwerty systems +#define QW_A 2 // bepo with altgr key to qwerty compat layer +#define QW_S 3 // bepo with shift key to qwerty compat layer +#define AZ_B 4 // bepo to azerty base compat layer, for azerty systems +#define AZ_A 5 // bepo with altgr key to azerty compat layer +#define AZ_S 6 // bepo with shift key to azerty compat layer +#define FNAV 7 // function / navigation / mouse layer +#define NUMK 8 // numeric keypad layer -#define KP_00 0 -#define CA_Fx 1 +// macros +#define KP_00 0 // keypad "double 0" const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* Keymap 0: Base layer +/* Keymap 0: default layer * * ,--------------------------------------------------. ,--------------------------------------------------. * | $ | " | < | > | ( | ) |Delete| |ScroLo| @ | + | - | / | * | = | @@ -26,22 +28,22 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |--------+------+------+------+------+------| Tab | | NumLo|------+------+------+------+------+--------| * | E_CIRC |A_GRAV| Y | X | . | K | | | | ' | Q | G | H | F | C_CEDIL| * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' - * |QWERTY| |LSuper| LCtrl| LAlt| |Escape| L_Mse| | |Insert| | AltGr| RCtrl|RSuper|PrntSc| Pause| + * |Escape|Insert|LSuper| LCtrl| LAlt| | BEPO |QWERTY| |AZERTY| BEPO | | AltGr| RCtrl|RSuper|PrntSc| Pause| * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' - * | | | L_Num| | CA_Fx| | | + * | | |L_NumK| |L_NumK| | | * | Space|LShift|------| |------|RShift|Enter | * | | |L_FNav| |L_FNav| | | * `--------------------' `--------------------' */ -[BASE] = KEYMAP( +[BEPO] = KEYMAP( // Left hand BP_DOLLAR, BP_DQOT, BP_LGIL, BP_RGIL, BP_LPRN, BP_RPRN, KC_DEL, BP_PERCENT, BP_B, BP_E_ACUTE, BP_P, BP_O, BP_E_GRAVE, KC_BSPC, BP_W, BP_A, BP_U, BP_I, BP_E, BP_COMMA, BP_ECRC, BP_A_GRAVE, BP_Y, BP_X, BP_DOT, BP_K, KC_TAB, -TG(QWER), KC_NO, KC_LGUI, KC_LCTL, KC_LALT, - KC_ESC, MO(MSE), - MO(NUM), +KC_ESC, KC_INS, KC_LGUI, KC_LCTL, KC_LALT, + DF(BEPO), DF(QW_B), + MO(NUMK), KC_SPC, KC_LSHIFT, MO(FNAV), // Right hand KC_SLCK, BP_AT, BP_PLUS, BP_MINUS, BP_SLASH, BP_ASTR, BP_EQUAL, @@ -49,10 +51,10 @@ TG(QWER), KC_NO, KC_LGUI, KC_LCTL, KC_LALT, BP_C, BP_T, BP_S, BP_R, BP_N, BP_M, KC_NUMLOCK, BP_APOS, BP_Q, BP_G, BP_H, BP_F, BP_CCED, BP_ALGR, KC_RCTL, KC_RGUI, KC_PSCREEN, KC_PAUSE, -KC_NO, KC_INS, -M(CA_Fx), +DF(AZ_B), DF(BEPO), +MO(NUMK), MO(FNAV), KC_RSHIFT, KC_ENTER), -/* Keymap 1: QWERTY system compatibility layer +/* Keymap 1: bepo to qwerty base compat layer * * ,--------------------------------------------------. ,--------------------------------------------------. * | $ | " | < | > | ( | ) |Delete| |ScroLo| @ | + | - | / | * | = | @@ -63,33 +65,70 @@ MO(FNAV), KC_RSHIFT, KC_ENTER), * |--------+------+------+------+------+------| Tab | | NumLo|------+------+------+------+------+--------| * | e | a | y | x | . | k | | | | ' | q | g | h | f | c | * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' - * | BEPO | |LSuper| LCtrl| LAlt| |Escape| L_Mse| | |Insert| | AltGr| RCtrl|RSuper|PrntSc| Pause| + * |Escape|Insert|LSuper| LCtrl| LAlt| | BEPO |QWERTY| |AZERTY| BEPO | | AltGr| RCtrl|RSuper|PrntSc| Pause| * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' - * | | | L_Num| | | | | + * | | |L_NumK| |L_NumK| | | * | Space|LShift|------| |------|RShift|Enter | * | | |L_FNav| |L_FNav| | | * `--------------------' `--------------------' */ -[QWER] = KEYMAP( +[QW_B] = KEYMAP( // Left hand KC_DOLLAR, S(KC_QUOT), S(KC_COMM), S(KC_DOT), KC_LPRN, KC_RPRN, KC_DEL, KC_PERCENT, KC_B, KC_E, KC_P, KC_O, KC_E, KC_BSPC, KC_W, KC_A, KC_U, KC_I, KC_E, KC_COMMA, KC_E, KC_A, KC_Y, KC_X, KC_DOT, KC_K, KC_TAB, -KC_TRNS, KC_NO, KC_LGUI, KC_LCTL, KC_LALT, - KC_ESC, MO(MSE), - MO(NUM), - KC_SPC, MO(SQWER), MO(FNAV), +KC_ESC, KC_INS, KC_LGUI, KC_LCTL, KC_LALT, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_SPC, MO(QW_S), KC_TRNS, // Right hand KC_SLCK, KC_AT, KC_PLUS, KC_MINUS, KC_SLASH, KC_ASTR, KC_EQUAL, KC_CAPSLOCK, KC_CIRC, KC_V, KC_D, KC_L, KC_J, KC_Z, KC_C, KC_T, KC_S, KC_R, KC_N, KC_M, KC_NUMLOCK, KC_QUOT, KC_Q, KC_G, KC_H, KC_F, KC_C, - MO(AQWER), KC_RCTL, KC_RGUI, KC_PSCREEN, KC_PAUSE, -KC_NO, KC_INS, + MO(QW_A), KC_RCTL, KC_RGUI, KC_PSCREEN, KC_PAUSE, +KC_TRNS, KC_TRNS, KC_TRNS, -MO(FNAV), MO(SQWER), KC_ENTER), -/* Keymap 2: QWERTY shifted system compatibility layer +KC_TRNS, MO(QW_S), KC_ENTER), +/* Keymap 2: bepo with altgr key to qwerty compat layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | $ | " | < | > | [ | ] |Delete| |ScroLo| @ | + | - | / | * | = | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | % | | | e | & | o | e |Backsp| |CapsLo| ^ | v | d | l | j | z | + * |--------+------+------+------+------+------| ace | | |------+------+------+------+------+--------| + * | w | a | u | i | € | , |------| |------| c | t | s | r | n | m | + * |--------+------+------+------+------+------| Tab | | NumLo|------+------+------+------+------+--------| + * | e | \ | { | } | . | ~ | | | | ' | q | g | h | f | c | + * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' + * |Escape|Insert|LSuper| LCtrl| LAlt| | BEPO |QWERTY| |AZERTY| BEPO | | AltGr| RCtrl|RSuper|PrntSc| Pause| + * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' + * | | |L_NumK| |L_NumK| | | + * | _ |LShift|------| |------|RShift|Enter | + * | | |L_FNav| |L_FNav| | | + * `--------------------' `--------------------' + */ +[QW_A] = KEYMAP( +// Left hand +KC_DOLLAR, S(KC_QUOT), S(KC_COMM), S(KC_DOT), KC_LBRC, KC_RBRC, KC_DEL, +KC_PERCENT, KC_PIPE, KC_E, KC_AMPR, KC_O, KC_E, KC_BSPC, +KC_W, KC_A, KC_U, KC_I, RALT(KC_5), KC_COMMA, +KC_E, KC_BSLASH, KC_LCBR, KC_RCBR, KC_DOT, KC_TILDE, KC_TAB, +KC_ESC, KC_INS, KC_LGUI, KC_LCTL, KC_LALT, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_UNDS, MO(QW_S), KC_TRNS, +// Right hand + KC_SLCK, KC_AT, KC_PLUS, KC_MINUS, KC_SLASH, KC_ASTR, KC_EQUAL, + KC_CAPSLOCK, KC_CIRC, KC_V, KC_D, KC_L, KC_J, KC_Z, + KC_C, KC_T, KC_S, KC_R, KC_N, KC_M, + KC_NUMLOCK, KC_QUOT, KC_Q, KC_G, KC_H, KC_F, KC_C, + KC_TRNS, KC_RCTL, KC_RGUI, KC_PSCREEN, KC_PAUSE, +KC_TRNS, KC_TRNS, +KC_TRNS, +KC_TRNS, MO(QW_S), KC_ENTER), +/* Keymap 3: bepo with shift key to qwerty compat layer * * ,--------------------------------------------------. ,--------------------------------------------------. * | # | 1 | 2 | 3 | 4 | 5 |Delete| |ScroLo| 6 | 7 | 8 | 9 | 0 | = | @@ -100,20 +139,20 @@ MO(FNAV), MO(SQWER), KC_ENTER), * |--------+------+------+------+------+------| Tab | | NumLo|------+------+------+------+------+--------| * | E | A | Y | X | : | K | | | | ? | Q | G | H | F | C | * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' - * | BEPO | |LSuper| LCtrl| LAlt| |Escape| L_Mse| | |Insert| | AltGr| RCtrl|RSuper|PrntSc| Pause| + * |Escape|Insert|LSuper| LCtrl| LAlt| | BEPO |QWERTY| |AZERTY| BEPO | | AltGr| RCtrl|RSuper|PrntSc| Pause| * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' - * | | | L_Num| | | | | + * | | |L_NumK| |L_NumK| | | * | Space|LShift|------| |------|RShift|Enter | * | | |L_FNav| |L_FNav| | | * `--------------------' `--------------------' */ -[SQWER] = KEYMAP( +[QW_S] = KEYMAP( // Left hand KC_HASH, KC_1, KC_2, KC_3, KC_4, KC_5, KC_TRNS, KC_GRV, S(KC_B), S(KC_E), S(KC_P), S(KC_O), S(KC_E), KC_TRNS, S(KC_W), S(KC_A), S(KC_U), S(KC_I), S(KC_E), KC_SCOLON, S(KC_E), S(KC_A), S(KC_Y), S(KC_X), KC_COLON, S(KC_K), S(KC_TAB), -KC_TRNS, KC_TRNS, S(KC_LGUI), S(KC_LCTL), S(KC_LALT), +S(KC_ESC), S(KC_INS), S(KC_LGUI), S(KC_LCTL), S(KC_LALT), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, @@ -126,51 +165,125 @@ KC_TRNS, KC_TRNS, S(KC_LGUI), S(KC_LCTL), S(KC_LALT), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), -/* Keymap 3: QWERTY alted system compatibility layer +/* Keymap 4: bepo to azerty base compat layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | $ | " | < | > | ( | ) |Delete| |ScroLo| @ | + | - | / | * | = | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | % | b |e_acut| p | o |e_grav|Backsp| |CapsLo| ^ | v | d | l | j | z | + * |--------+------+------+------+------+------| ace | | |------+------+------+------+------+--------| + * | w | a | u | i | e | , |------| |------| c | t | s | r | n | m | + * |--------+------+------+------+------+------| Tab | | NumLo|------+------+------+------+------+--------| + * | e |a_grav| y | x | . | k | | | | ' | q | g | h | f | c_cedil| + * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' + * |Escape|Insert|LSuper| LCtrl| LAlt| | BEPO |QWERTY| |AZERTY| BEPO | | AltGr| RCtrl|RSuper|PrntSc| Pause| + * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' + * | | |L_NumK| |L_NumK| | | + * | Space|LShift|------| |------|RShift|Enter | + * | | |L_FNav| |L_FNav| | | + * `--------------------' `--------------------' + */ +[AZ_B] = KEYMAP( +// Left hand +FR_DLR, FR_QUOT, FR_LESS, FR_GRTR, FR_LPRN, FR_RPRN, KC_DEL, +FR_PERC, KC_B, FR_EACU, KC_P, KC_O, FR_EGRV, KC_BSPC, +FR_W, FR_A, KC_U, KC_I, KC_E, FR_COMM, +KC_E, FR_AGRV, KC_Y, KC_X, FR_DOT, KC_K, KC_TAB, +KC_ESC, KC_INS, KC_LGUI, KC_LCTL, KC_LALT, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_SPC, MO(AZ_S), KC_TRNS, +// Right hand + KC_SLCK, FR_AT, FR_PLUS, FR_MINS, FR_SLSH, FR_ASTR, FR_EQL, + KC_CAPSLOCK, KC_LBRC, KC_V, KC_D, KC_L, KC_J, FR_Z, + KC_C, KC_T, KC_S, KC_R, KC_N, FR_M, + KC_NUMLOCK, FR_APOS, FR_Q, KC_G, KC_H, KC_F, FR_CCED, + MO(AZ_A), KC_RCTL, KC_RGUI, KC_PSCREEN, KC_PAUSE, +KC_TRNS, KC_TRNS, +KC_TRNS, +KC_TRNS, MO(AZ_S), KC_ENTER), +/* Keymap 5: bepo with altgr key to azerty compat layer * * ,--------------------------------------------------. ,--------------------------------------------------. * | $ | " | < | > | [ | ] |Delete| |ScroLo| @ | + | - | / | * | = | * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| * | % | | | e | & | o | e |Backsp| |CapsLo| ^ | v | d | l | j | z | * |--------+------+------+------+------+------| ace | | |------+------+------+------+------+--------| - * | w | a | u | i | € | , |------| |------| c | t | s | r | n | m | + * | w | a |u_grav| trem | € | , |------| |------| c | t | s | r | n | m | * |--------+------+------+------+------+------| Tab | | NumLo|------+------+------+------+------+--------| - * | e | \ | { | } | . | ~ | | | | ' | q | g | h | f | c | + * | / | \ | { | } | . | ~ | | | | ' | q | g | h | f | c | * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' - * | BEPO | |LSuper| LCtrl| LAlt| |Escape| L_Mse| | |Insert| | AltGr| RCtrl|RSuper|PrntSc| Pause| + * |Escape|Insert|LSuper| LCtrl| LAlt| | BEPO |QWERTY| |AZERTY| BEPO | | AltGr| RCtrl|RSuper|PrntSc| Pause| * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' - * | | | L_Num| | | | | + * | | |L_NumK| |L_NumK| | | * | _ |LShift|------| |------|RShift|Enter | * | | |L_FNav| |L_FNav| | | * `--------------------' `--------------------' */ -[AQWER] = KEYMAP( +[AZ_A] = KEYMAP( // Left hand -KC_DOLLAR, S(KC_QUOT), S(KC_COMM), S(KC_DOT), KC_LBRC, KC_RBRC, KC_DEL, -KC_PERCENT, KC_PIPE, KC_E, KC_AMPR, KC_O, KC_E, KC_BSPC, -KC_W, KC_A, KC_U, KC_I, RALT(KC_5), KC_COMMA, -KC_E, KC_BSLASH, KC_LCBR, KC_RCBR, KC_DOT, KC_TILDE, KC_TAB, -KC_TRNS, KC_NO, KC_LGUI, KC_LCTL, KC_LALT, - KC_ESC, MO(MSE), - MO(NUM), - KC_UNDS, MO(SQWER), MO(FNAV), +FR_DLR, FR_QUOT, FR_LESS, FR_GRTR, FR_LBRC, FR_RBRC, KC_DEL, +FR_PERC, FR_PIPE, FR_EACU, FR_AMP, KC_O, FR_EGRV, KC_BSPC, +FR_W, FR_A, FR_UGRV, S(KC_LBRC), FR_EURO, FR_COMM, +FR_SLSH, FR_BSLS, FR_LCBR, FR_RCBR, FR_DOT, FR_TILD, KC_TAB, +KC_ESC, KC_INS, KC_LGUI, KC_LCTL, KC_LALT, + KC_TRNS, KC_TRNS, + KC_TRNS, + FR_UNDS, MO(AZ_S), KC_TRNS, // Right hand - KC_SLCK, KC_AT, KC_PLUS, KC_MINUS, KC_SLASH, KC_ASTR, KC_EQUAL, - KC_CAPSLOCK, KC_CIRC, KC_V, KC_D, KC_L, KC_J, KC_Z, - KC_C, KC_T, KC_S, KC_R, KC_N, KC_M, - KC_NUMLOCK, KC_QUOT, KC_Q, KC_G, KC_H, KC_F, KC_C, + KC_SLCK, FR_AT, FR_PLUS, FR_MINS, FR_SLSH, FR_ASTR, FR_EQL, + KC_CAPSLOCK, KC_LBRC, KC_V, KC_D, KC_L, KC_J, FR_Z, + KC_C, KC_T, KC_S, KC_R, KC_N, FR_M, + KC_NUMLOCK, FR_APOS, FR_Q, KC_G, KC_H, KC_F, FR_CCED, KC_TRNS, KC_RCTL, KC_RGUI, KC_PSCREEN, KC_PAUSE, -KC_NO, KC_INS, +KC_TRNS, KC_TRNS, KC_TRNS, -MO(FNAV), MO(SQWER), KC_ENTER), -/* Keymap 4: function / navigation layer +KC_TRNS, MO(AZ_S), KC_ENTER), +/* Keymap 6: bepo with shift key to azerty compat layer + * + * ,--------------------------------------------------. ,--------------------------------------------------. + * | # | 1 | 2 | 3 | 4 | 5 |Delete| |ScroLo| 6 | 7 | 8 | 9 | 0 | ° | + * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| + * | ` | B | E | P | O | E |Backsp| |CapsLo| ! | V | D | L | J | Z | + * |--------+------+------+------+------+------| ace | | |------+------+------+------+------+--------| + * | W | A | U | I | E | ; |------| |------| C | T | S | R | N | M | + * |--------+------+------+------+------+------| Tab | | NumLo|------+------+------+------+------+--------| + * | E | A | Y | X | : | K | | | | ? | Q | G | H | F | C | + * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' + * |Escape|Insert|LSuper| LCtrl| LAlt| | BEPO |QWERTY| |AZERTY| BEPO | | AltGr| RCtrl|RSuper|PrntSc| Pause| + * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' + * | | |L_NumK| |L_NumK| | | + * | Space|LShift|------| |------|RShift|Enter | + * | | |L_FNav| |L_FNav| | | + * `--------------------' `--------------------' + */ +[AZ_S] = KEYMAP( +// Left hand +FR_HASH, FR_1, FR_2, FR_3, FR_4, FR_5, KC_TRNS, +FR_GRV, S(KC_B), S(KC_E), S(KC_P), S(KC_O), S(KC_E), KC_TRNS, +S(FR_W), S(FR_A), S(KC_U), S(KC_I), S(KC_E), FR_SCLN, +S(KC_E), S(FR_A), S(KC_Y), S(KC_X), FR_COLN, S(KC_K), S(KC_TAB), +S(KC_ESC), S(KC_INS), S(KC_LGUI), S(KC_LCTL), S(KC_LALT), + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, +// Right hand + KC_TRNS, FR_6, FR_7, FR_8, FR_9, FR_0, FR_OVRR, + KC_TRNS, FR_EXLM, S(KC_V), S(KC_D), S(KC_L), S(KC_J), S(FR_Z), + S(KC_C), S(KC_T), S(KC_S), S(KC_R), S(KC_N), S(FR_M), + KC_TRNS, FR_QUES, S(FR_Q), S(KC_G), S(KC_H), S(KC_F), S(KC_C), + S(KC_RALT), S(KC_RCTL), S(KC_RGUI), KC_TRNS, KC_TRNS, +KC_TRNS, KC_TRNS, +KC_TRNS, +KC_TRNS, KC_TRNS, KC_TRNS), +/* Keymap 7: function / navigation / mouse layer * * ,--------------------------------------------------. ,--------------------------------------------------. * | | F1 | F2 | F3 | F4 | F5 |VolMut| | | F6 | F7 | F8 | F9 | F10 | | * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | | | | | |VolDwn| | | PgUp | Home | Up | End | F11 | | + * | | Next |LClick| Up |RClick| WhUp |VolDwn| | | PgUp | Home | Up | End | F11 | | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | |------| |------| PgDn | Left | Down | Right| F12 | | + * | | Prev | Left | Down | Right|WhDown|------| |------| PgDn | Left | Down | Right| F12 | | * |--------+------+------+------+------+------| VolUp| | |------+------+------+------+------+--------| * | | Undo | Cut | Copy | Paste| | | | | | | | | | | * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' @@ -184,12 +297,12 @@ MO(FNAV), MO(SQWER), KC_ENTER), [FNAV] = KEYMAP( // Left hand KC_NO, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_MUTE, -KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_VOLU, -KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, +KC_NO, KC_MS_BTN5, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, KC_MS_WH_UP, KC_VOLU, +KC_NO, KC_MS_BTN4, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, KC_MS_WH_DOWN, KC_NO, KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, KC_NO, KC_VOLD, KC_NO, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, - KC_NO, KC_NO, - KC_NO, + KC_TRNS, KC_TRNS, + KC_TRNS, KC_NO, KC_TRNS, KC_TRNS, // Right hand KC_NO, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_NO, @@ -197,91 +310,52 @@ KC_NO, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDOWN, KC_LEFT, KC_DOWN, KC_RIGHT, KC_F12, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, -KC_NO, KC_NO, +KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO), -/* Keymap 5: numeric layer, sends keypad codes +/* Keymap 8: numeric keypad layer, sends keypad codes * * ,--------------------------------------------------. ,--------------------------------------------------. - * | | | | | | | | | | | + | - | / | * | | + * | | | | | | | | | | | NumLo| / | * | - | | * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | | | | | | | | | | 7 | 8 | 9 | | | + * | | | | | | | | | | | 7 | 8 | 9 | + | | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | |------| |------| | 4 | 5 | 6 | | | + * | | | | | | |------| |------| | 4 | 5 | 6 | + | | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | | | | | | 1 | 2 | 3 | | | + * | | | | | | | | | | | 1 | 2 | 3 | Enter| | * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' - * | | | | | | | | | | | | | 0 | 00 | . | | | - * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' - * | | | | | | | | - * | | |------| |------| | Enter| - * | | | | | | | | - * `--------------------' `--------------------' - */ -[NUM] = KEYMAP( -// Left hand -KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, -KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, -KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, -KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, -KC_NO, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, - KC_NO, KC_NO, - KC_TRNS, - KC_NO, KC_TRNS, KC_NO, -// Right hand - KC_NO, KC_NO, KC_KP_PLUS, KC_KP_MINUS, KC_KP_SLASH, KC_KP_ASTERISK, KC_NO, - KC_NO, KC_NO, KC_KP_7, KC_KP_8, KC_KP_9, KC_NO, KC_NO, - KC_NO, KC_KP_4, KC_KP_5, KC_KP_6, KC_NO, KC_NO, - KC_NO, KC_NO, KC_KP_1, KC_KP_2, KC_KP_3, KC_NO, KC_NO, - KC_KP_0, M(KP_00), KC_KP_COMMA, KC_NO, KC_NO, -KC_NO, KC_NO, -KC_NO, -KC_NO, KC_TRNS, KC_KP_ENTER), -/* Keymap 6: mouse layer - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | | | | | | | | | |LClick| Up |RClick| WhUp | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | |------| |------| | Left | Down | Right|WhDown| | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | | | | | | | | | | | | | | - * `--------+------+------+------+------+-------------,-------------. ,-------------`-------------+------+------+------+------+--------' - * | | | | | | | | | | | | | | | | | | + * | | | | | | | | | | | | | 0 | 00 | . | Enter| | * `----------------------------------' ,------|------|------| |------+------+------. `----------------------------------' * | | | | | | | | * | | |------| |------| | | * | | | | | | | | * `--------------------' `--------------------' */ -[MSE] = KEYMAP( +[NUMK] = KEYMAP( // Left hand KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_TRNS, KC_TRNS, - KC_NO, KC_TRNS, - KC_NO, - KC_NO, KC_TRNS, KC_NO, + KC_TRNS, KC_TRNS, + KC_TRNS, + KC_NO, KC_TRNS, KC_TRNS, // Right hand - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, KC_MS_WH_UP, KC_NO, - KC_NO, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, KC_MS_WH_DOWN, KC_NO, - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, -KC_NO, KC_NO, -KC_NO, -KC_NO, KC_TRNS, KC_NO) -}; - -const uint16_t PROGMEM fn_actions[] = { + KC_NO, KC_NO, KC_NUMLOCK, KC_KP_SLASH, KC_KP_ASTERISK, KC_KP_MINUS, KC_NO, + KC_NO, KC_NO, KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, KC_NO, + KC_NO, KC_KP_4, KC_KP_5, KC_KP_6, KC_KP_PLUS, KC_NO, + KC_NO, KC_NO, KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_ENTER, KC_NO, + KC_KP_0, M(KP_00), KC_KP_COMMA, KC_KP_ENTER, KC_NO, +KC_TRNS, KC_TRNS, +KC_TRNS, +KC_TRNS, KC_TRNS, KC_NO) }; const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { switch(id) { + // keypad "double 0" case KP_00: if (record->event.pressed) { return MACRO( T(KP_0), D(KP_0), END ); @@ -289,23 +363,6 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) return MACRO( U(KP_0), END ); } break; - case CA_Fx: - if (record->event.pressed) { - layer_on(FNAV); - return MACRO( D(LALT), D(LCTL), END ); - } else { - layer_off(FNAV); - return MACRO( U(LCTL), U(LALT), END ); - } - break; } return MACRO_NONE; }; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { -}; - -// Runs constantly in the background, in a loop. -void matrix_scan_user(void) { -}; diff --git a/keyboards/ergodox/keymaps/bepo/readme.md b/keyboards/ergodox/keymaps/bepo/readme.md index 4a18cd80f..2959ac829 100644 --- a/keyboards/ergodox/keymaps/bepo/readme.md +++ b/keyboards/ergodox/keymaps/bepo/readme.md @@ -23,12 +23,12 @@ La touche "Tab" est placée comme sur la TypeMatrix 2020. Meilleure symétrie et accessibilité que la TypeMatrix 2030 : les touches "W" et "%" ont dû être déplacées du côté gauche en raison du nombre de touches de l'ErgoDox, mais l'auriculaire droit ne gère maintenant que deux colonnes de touches au lieu de trois. La touche "Ê" redevient accessible sur la même rangée que les autres lettres, comme sur un clavier classique en disposition bépo. Les lettres, chiffres et symboles sont tous regroupés sur 4 lignes et 6 colonnes pour chaque main, et la première rangée de lettres à la main gauche conserve une identité visuelle "BÉPO". -Touche de fonction permettant de saisir les touches F1 à F12, les touches F1 à F10 sont placées de façon logique par rapport aux chiffres 1 à 0. Cette même touche permet l'accès aux touches directionnelles sans déplacer la main droite. Les touches "Home" et "End" sont placées de la même façon que sur une TypeMatrix 2030 par rapport aux touches directionnelles. Les touches "Page Up" et "Page Down" sont également accessibles facilement sans déplacer la main droite. Les fonctions "VolUp" et "VolDown" sont placées comme sur la TypeMatrix 2030, avec la fonction "Mute" juste au dessus. Les fonctions "Undo", "Cut", "Copy" et "Paste" sont placées côte à côte comme elles le seraient sur un clavier QWERTY en combinaison avec la touche "Ctrl" (à l'emplacement des lettres "Z", "X", "C" et "V"). Par rapport au layout "SpaceFN", l'utilisation d'une touche de fonction dédiée au pouce permet de ne pas ajouter de latence, et la touche espace reste compatible avec les jeux (action au moment de l'appui et possibilité d'appui long). +Touche de fonction permettant de saisir les touches F1 à F12, les touches F1 à F10 sont placées de façon logique par rapport aux chiffres 1 à 0. Cette même touche permet l'accès aux touches directionnelles sans déplacer la main droite et d'effectuer des actions souris avec uniquement la main gauche. Les touches "Home" et "End" sont placées de la même façon que sur une TypeMatrix 2030 par rapport aux touches directionnelles. Les touches "Page Up" et "Page Down" sont également accessibles facilement sans déplacer la main droite. Les fonctions "VolUp" et "VolDown" sont placées comme sur la TypeMatrix 2030, avec la fonction "Mute" juste au dessus. Les fonctions "Undo", "Cut", "Copy" et "Paste" sont placées côte à côte comme elles le seraient sur un clavier QWERTY en combinaison avec la touche "Ctrl" (à l'emplacement des lettres "Z", "X", "C" et "V"). Par rapport au layout "SpaceFN", l'utilisation d'une touche de fonction dédiée au pouce permet de ne pas ajouter de latence, et la touche espace reste compatible avec les jeux (action au moment de l'appui et possibilité d'appui long). Touche de fonction permettant l'accès au pavé numérique comme sur la TypeMatrix 2030, mais sans avoir à déplacer la main droite : avec les doigts sur la rangée de repos, possibilité de saisir les chiffres "4", "5" et "6" comme sur un pavé numérique classique. Le double "0" de la TypeMatrix a été conservé, et gagne une possibilité de répétition en simples "0". -L'appui sur une touche permet de basculer en mode BEPO sur un système configuré pour un clavier QWERTY. Cette compatibilité n'est pas parfaite (pas encore de gestion des accents mais ça devrait être faisable avec une disposition en qwerty international, et les combinaisons de touches ne sont pas toutes supportées puisque le clavier traduit déjà certaines touches en combinaisons) mais reste pratique pour une saisie de texte occasionnelle. +Touche permettant de basculer en mode BEPO sur un système configuré pour un clavier QWERTY. Cette compatibilité n'est pas parfaite (pas encore de gestion des accents mais ça devrait être faisable avec une disposition en qwerty international, et les combinaisons de touches ne sont pas toutes supportées puisque le clavier traduit déjà certaines touches en combinaisons) mais reste pratique pour une saisie de texte occasionnelle et pour des accès BIOS ou console en QWERTY. -TODO : couche de compatibilité pour utiliser la disposition BÉPO sur un système configuré pour un clavier AZERTY. +Touche permettant de basculer en mode BEPO sur un système configuré pour un clavier AZERTY. Cette compatibilité n'est pas parfaite (pas de gestion des caractères non présents sur le clavier AZERTY, et les combinaisons de touches ne sont pas toutes supportées puisque le clavier traduit déjà certaines touches en combinaisons) mais reste pratique pour une saisie de texte occasionnelle et pour faire du bureau à distance vers un système Windows sans BEPO. > Olivier Smedts diff --git a/keyboards/ergodox/keymaps/erez_experimental/Makefile b/keyboards/ergodox/keymaps/erez_experimental/Makefile index b673c5ce5..51a0c74c5 100644 --- a/keyboards/ergodox/keymaps/erez_experimental/Makefile +++ b/keyboards/ergodox/keymaps/erez_experimental/Makefile @@ -3,6 +3,8 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend COMMAND_ENABLE = no # Commands for debug and configuration +RGBLIGHT_ENABLE ?= yes +MIDI_ENABLE ?= yes ifndef QUANTUM_DIR include ../../../../Makefile diff --git a/keyboards/ergodox/keymaps/erez_experimental/config.h b/keyboards/ergodox/keymaps/erez_experimental/config.h index e5d7fe188..4da18c65a 100644 --- a/keyboards/ergodox/keymaps/erez_experimental/config.h +++ b/keyboards/ergodox/keymaps/erez_experimental/config.h @@ -8,5 +8,6 @@ #undef LEADER_TIMEOUT #define LEADER_TIMEOUT 300 + #endif diff --git a/keyboards/ergodox/keymaps/erez_experimental/keymap.c b/keyboards/ergodox/keymaps/erez_experimental/keymap.c index 4804959d6..2963c40e3 100644 --- a/keyboards/ergodox/keymaps/erez_experimental/keymap.c +++ b/keyboards/ergodox/keymaps/erez_experimental/keymap.c @@ -7,6 +7,12 @@ #define SYMB 1 // symbols #define MDIA 2 // media keys +enum custom_keycodes { + PLACEHOLDER = SAFE_RANGE, // can always be here + RGB_FF00BB // always start with RGB_ +}; + + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap 0: Basic layer * @@ -65,33 +71,33 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | |NxtTab|PrvTab| | | | | | | * `----------------------------------' `----------------------------------' * ,-------------. ,-------------. - * | | | | | | + * | | | |TOG | * ,------|------|------| |------+------+------. - * | | | | | | | | + * |VAI |VAD |HUI | |SAI |TOG |MOD | * | | |------| |------| | | - * | | | | | | | | + * | | |HUD | |SAD | | | * `--------------------' `--------------------' */ // SYMBOLS [SYMB] = KEYMAP( // left hand - KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + RGB_FF00BB, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_TRNS, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,LCTL(KC_PGUP), LCTL(KC_PGDN), KC_TRNS,KC_TRNS, - KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS, + RGB_HUI, + RGB_VAI,RGB_VAD,RGB_HUD, // right hand KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F12, KC_AMPR, KC_UNDS, KC_MINS, CM_SCLN, KC_PLUS, KC_TRNS, KC_TRNS, KC_PIPE, KC_AT, KC_EQL, KC_PERC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS + RGB_TOG, KC_TRNS, + RGB_SAI, + RGB_SAD, KC_TRNS, RGB_MOD ), /* Keymap 2: Media and mouse keys * @@ -152,6 +158,24 @@ void matrix_init_user(void) { }; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + // dynamically generate these. + case RGB_FF00BB: + if (record->event.pressed) { + #ifdef RGBLIGHT_ENABLE + rgblight_enable(); + rgblight_mode(1); + rgblight_setrgb(0xff,0x00,0xbb); + #endif + } + return false; + break; + } + return true; +} + LEADER_EXTERNS(); // Runs constantly in the background, in a loop. diff --git a/keyboards/ergodox/keymaps/jack/Makefile b/keyboards/ergodox/keymaps/jack/Makefile new file mode 100644 index 000000000..3ca69bb92 --- /dev/null +++ b/keyboards/ergodox/keymaps/jack/Makefile @@ -0,0 +1,6 @@ +RGBLIGHT_ENABLE ?= yes +MIDI_ENABLE ?= yes + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/ergodox/keymaps/jack/config.h b/keyboards/ergodox/keymaps/jack/config.h new file mode 100644 index 000000000..5c1165226 --- /dev/null +++ b/keyboards/ergodox/keymaps/jack/config.h @@ -0,0 +1,17 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +/* ws2812 RGB LED */ +#define RGB_DI_PIN D7 +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 15 // Number of LEDs +#define RGBLIGHT_HUE_STEP 12 +#define RGBLIGHT_SAT_STEP 255 +#define RGBLIGHT_VAL_STEP 12 + +#define RGB_MIDI +#define RGBW_BB_TWI + +#endif \ No newline at end of file diff --git a/keyboards/ergodox/keymaps/jack/keymap.c b/keyboards/ergodox/keymaps/jack/keymap.c index dda253fa4..9cb80c59d 100644 --- a/keyboards/ergodox/keymaps/jack/keymap.c +++ b/keyboards/ergodox/keymaps/jack/keymap.c @@ -19,14 +19,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_HOME, KC_SPC,KC_SPC,KC_END, // right hand - KC_NO, KC_6, KC_7, KC_8, KC_9, KC_0, KC_NO, - KC_NO, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_NO, M(1), KC_7, KC_8, KC_9, KC_0, KC_NO, + KC_NO, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, KC_P, KC_BSPC, + RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_SCLN, KC_QUOT, KC_NO, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_ENT, MO(1), KC_LEFT,KC_DOWN,KC_UP, KC_RGHT, - KC_NO, KC_NO, - KC_PGUP, - KC_PGDN, KC_SPC,KC_SPC + RGB_TOG, RGB_HUI, + RGB_MOD, + M(2), KC_SPC,KC_SPC ), [SYMB] = KEYMAP( // left hand @@ -84,6 +84,16 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) unregister_code(KC_RSFT); } break; + case 1: + if (record->event.pressed) { // For resetting EEPROM + eeconfig_init(); + } + break; + case 2: + if (record->event.pressed) { // For resetting EEPROM + api_send_unicode(0x0CA0); + } + break; } return MACRO_NONE; }; diff --git a/keyboards/ergodox/keymaps/robot_test_layout/keymap.c b/keyboards/ergodox/keymaps/robot_test_layout/keymap.c new file mode 100644 index 000000000..0363eedc2 --- /dev/null +++ b/keyboards/ergodox/keymaps/robot_test_layout/keymap.c @@ -0,0 +1,130 @@ +#include "ergodox.h" +#include "debug.h" +#include "action_layer.h" +#include "version.h" + +enum custom_keycodes { + PLACEHOLDER = SAFE_RANGE, // can always be here + RGB_FF0000, + RGB_00FF00, + RGB_0000FF, + RGB_FFFFFF, + RGB_TOGGLE +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[0] = KEYMAP( + RGB_TOGGLE,RGB_FF0000,RGB_00FF00,RGB_0000FF,RGB_FFFFFF,RGB_TOGGLE,KC_6, + KC_A,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_E,KC_A,KC_A,KC_S,KC_D,KC_F,KC_G,KC_A,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_L,KC_Z,KC_QUOTE,KC_N,KC_U,KC_C,KC_E,KC_8,KC_9,KC_Y,KC_COMMA,KC_6,KC_7,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINUS,KC_J,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_BSLASH,KC_H,KC_J,KC_K,KC_L,KC_J,KC_K,KC_Z,KC_N,KC_M,KC_COMMA,KC_DOT,KC_E,KC_QUOTE,KC_8,KC_7,KC_LBRACKET,KC_RBRACKET,KC_H,KC_9,KC_7,KC_8,KC_7,KC_6,KC_9), +}; + +const uint16_t PROGMEM fn_actions[] = { + [1] = ACTION_LAYER_TAP_TOGGLE(1) +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + switch(id) { + case 0: + if (record->event.pressed) { + SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION); + } + break; + } + return MACRO_NONE; +}; + + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + // dynamically generate these. + case RGB_FF0000: + if (record->event.pressed) { + #ifdef RGBLIGHT_ENABLE + EZ_RGB(0xff0000); + register_code(KC_A); unregister_code(KC_A); + #endif + } + return false; + break; + case RGB_00FF00: + if (record->event.pressed) { + #ifdef RGBLIGHT_ENABLE + EZ_RGB(0x00ff00); + register_code(KC_B); unregister_code(KC_B); + #endif + } + return false; + break; + case RGB_0000FF: + if (record->event.pressed) { + #ifdef RGBLIGHT_ENABLE + EZ_RGB(0x0000ff); + register_code(KC_C); unregister_code(KC_C); + #endif + } + return false; + break; + case RGB_FFFFFF: + if (record->event.pressed) { + #ifdef RGBLIGHT_ENABLE + EZ_RGB(0xffffff); + register_code(KC_D); unregister_code(KC_D); + #endif + } + return false; + break; + case RGB_TOGGLE: + if (record->event.pressed) { + #ifdef RGBLIGHT_ENABLE + rgblight_toggle(); + register_code(KC_F); unregister_code(KC_F); + #endif + } + return false; + break; + } + return true; +} + +void matrix_scan_user(void) { + + uint8_t layer = biton32(layer_state); + + ergodox_board_led_off(); + ergodox_right_led_1_off(); + ergodox_right_led_2_off(); + ergodox_right_led_3_off(); + switch (layer) { + case 1: + ergodox_right_led_1_on(); + break; + case 2: + ergodox_right_led_2_on(); + break; + case 3: + ergodox_right_led_3_on(); + break; + case 4: + ergodox_right_led_1_on(); + ergodox_right_led_2_on(); + break; + case 5: + ergodox_right_led_1_on(); + ergodox_right_led_3_on(); + break; + case 6: + ergodox_right_led_2_on(); + ergodox_right_led_3_on(); + break; + case 7: + ergodox_right_led_1_on(); + ergodox_right_led_2_on(); + ergodox_right_led_3_on(); + break; + default: + break; + } + +}; diff --git a/keyboards/ergodox/keymaps/robot_test_layout/readme.md b/keyboards/ergodox/keymaps/robot_test_layout/readme.md new file mode 100644 index 000000000..45dc2aa76 --- /dev/null +++ b/keyboards/ergodox/keymaps/robot_test_layout/readme.md @@ -0,0 +1,5 @@ +# Robot test layout + +Use this layout if you like to pretend you're [Norman](https://www.youtube.com/watch?v=-sbxFBay-tg), the ErgoDox EZ manufacturing robot. + +It's really meant just for internal use, but we're posting it on GitHub anyway, because hurray to open source. :) diff --git a/keyboards/ergodox/rules.mk b/keyboards/ergodox/rules.mk index add64ec76..2e501e81b 100644 --- a/keyboards/ergodox/rules.mk +++ b/keyboards/ergodox/rules.mk @@ -24,6 +24,5 @@ COMMAND_ENABLE ?= yes # Commands for debug and configuration CUSTOM_MATRIX ?= yes # Custom matrix file for the ErgoDox EZ SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -MIDI_ENABLE ?= no # MIDI controls UNICODE_ENABLE ?= yes # Unicode ONEHAND_ENABLE ?= yes # Allow swapping hands of keyboard diff --git a/keyboards/gh60/keymaps/robotmaxtron/config.h b/keyboards/gh60/keymaps/robotmaxtron/config.h index 6a29e6b8c..bcd753461 100644 --- a/keyboards/gh60/keymaps/robotmaxtron/config.h +++ b/keyboards/gh60/keymaps/robotmaxtron/config.h @@ -182,7 +182,7 @@ along with this program. If not, see . #define ws2812_pin PF4 */ #define RGB_DI_PIN F4 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 8 // Number of LEDs #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 diff --git a/keyboards/handwired/minorca/keymaps/rgb/config.h b/keyboards/handwired/minorca/keymaps/rgb/config.h index deaac2e26..43b3c5911 100644 --- a/keyboards/handwired/minorca/keymaps/rgb/config.h +++ b/keyboards/handwired/minorca/keymaps/rgb/config.h @@ -11,7 +11,7 @@ /* ws2812 RGB LED */ #define RGB_DI_PIN D5 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 13 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/jd40/config.h b/keyboards/jd40/config.h index e2594f4b3..047be5707 100644 --- a/keyboards/jd40/config.h +++ b/keyboards/jd40/config.h @@ -70,7 +70,7 @@ along with this program. If not, see . ) #define RGB_DI_PIN D3 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 12 // Number of LEDs #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 diff --git a/keyboards/kc60/keymaps/ws2812/config.h b/keyboards/kc60/keymaps/ws2812/config.h index 2f39ea8e5..43abf6228 100644 --- a/keyboards/kc60/keymaps/ws2812/config.h +++ b/keyboards/kc60/keymaps/ws2812/config.h @@ -2,7 +2,7 @@ /* WS2812B RGB Underglow LED */ #define RGB_DI_PIN F5 // Based on wiring depicted in ws2812_wiring.jpg -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 16 // Number of LEDs. Change this to match your use case. #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 diff --git a/keyboards/lets_split/config.h b/keyboards/lets_split/config.h index 1b7bbcbbb..4db45ab0b 100644 --- a/keyboards/lets_split/config.h +++ b/keyboards/lets_split/config.h @@ -49,6 +49,7 @@ along with this program. If not, see . #define IS_COMMAND() ( \ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ ) + /* disable debug print */ //#define NO_DEBUG @@ -68,4 +69,4 @@ along with this program. If not, see . #ifdef SUBPROJECT_rev2 #include "rev2/config.h" #endif -#endif \ No newline at end of file +#endif diff --git a/keyboards/lets_split/keymaps/i2c/config.h b/keyboards/lets_split/keymaps/i2c/config.h index 2671fabf6..72e5ae66b 100644 --- a/keyboards/lets_split/keymaps/i2c/config.h +++ b/keyboards/lets_split/keymaps/i2c/config.h @@ -75,7 +75,7 @@ along with this program. If not, see . /* ws2812 RGB LED */ #define RGB_DI_PIN D4 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 8 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/lets_split/keymaps/serial/config.h b/keyboards/lets_split/keymaps/serial/config.h index f4d900acc..b0ad522fc 100644 --- a/keyboards/lets_split/keymaps/serial/config.h +++ b/keyboards/lets_split/keymaps/serial/config.h @@ -75,7 +75,7 @@ along with this program. If not, see . /* ws2812 RGB LED */ #define RGB_DI_PIN D4 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 8 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/phantom/config.h b/keyboards/phantom/config.h index 983a1d73f..71a33498b 100644 --- a/keyboards/phantom/config.h +++ b/keyboards/phantom/config.h @@ -63,7 +63,7 @@ along with this program. If not, see . /* Underlight configuration */ #define RGB_DI_PIN E2 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 20 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/planck/keymaps/default/Makefile b/keyboards/planck/keymaps/default/Makefile index 0f4953888..267a087ea 100644 --- a/keyboards/planck/keymaps/default/Makefile +++ b/keyboards/planck/keymaps/default/Makefile @@ -5,17 +5,17 @@ # the appropriate keymap folder that will get included automatically # BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration +COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls +MIDI_ENABLE = yes # MIDI controls AUDIO_ENABLE = yes # Audio output on port C6 UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/planck/keymaps/default/keymap.c b/keyboards/planck/keymaps/default/keymap.c index 5f71ae7d1..ddbe4d7b2 100644 --- a/keyboards/planck/keymaps/default/keymap.c +++ b/keyboards/planck/keymaps/default/keymap.c @@ -107,7 +107,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_LOWER] = { {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, - {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),KC_HOME, KC_END, _______}, {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, @@ -125,7 +125,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_RAISE] = { {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, - {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______}, {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} }, diff --git a/keyboards/planck/keymaps/experimental/config.h b/keyboards/planck/keymaps/experimental/config.h index 52acd1905..cc093bee4 100644 --- a/keyboards/planck/keymaps/experimental/config.h +++ b/keyboards/planck/keymaps/experimental/config.h @@ -9,7 +9,7 @@ /* ws2812 RGB LED */ #define RGB_DI_PIN B1 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 8 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/planck/keymaps/thermal_printer/Makefile b/keyboards/planck/keymaps/thermal_printer/Makefile new file mode 100644 index 000000000..3d1d11877 --- /dev/null +++ b/keyboards/planck/keymaps/thermal_printer/Makefile @@ -0,0 +1,26 @@ + + +# Build Options +# change to "no" to disable the options, or define them in the Makefile in +# the appropriate keymap folder that will get included automatically +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +MIDI_ENABLE = no # MIDI controls +AUDIO_ENABLE = yes # Audio output on port C6 +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +PRINTING_ENABLE = yes + +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend + +ifndef QUANTUM_DIR + include ../../../../Makefile +endif diff --git a/keyboards/planck/keymaps/thermal_printer/config.h b/keyboards/planck/keymaps/thermal_printer/config.h new file mode 100644 index 000000000..430b6493c --- /dev/null +++ b/keyboards/planck/keymaps/thermal_printer/config.h @@ -0,0 +1,23 @@ +#ifndef CONFIG_USER_H +#define CONFIG_USER_H + +#include "../../config.h" + +# define SERIAL_UART_BAUD 19200 +# define SERIAL_UART_DATA UDR1 +# define SERIAL_UART_UBRR (F_CPU / (16UL * SERIAL_UART_BAUD) - 1) +# define SERIAL_UART_RXD_VECT USART1_RX_vect +# define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1)) +# define SERIAL_UART_INIT() do { \ + /* baud rate */ \ + UBRR1L = SERIAL_UART_UBRR; \ + /* baud rate */ \ + UBRR1H = SERIAL_UART_UBRR >> 8; \ + /* enable TX */ \ + UCSR1B = _BV(TXEN1); \ + /* 8-bit data */ \ + UCSR1C = _BV(UCSZ11) | _BV(UCSZ10); \ + sei(); \ + } while(0) + + #endif \ No newline at end of file diff --git a/keyboards/planck/keymaps/thermal_printer/keymap.c b/keyboards/planck/keymaps/thermal_printer/keymap.c new file mode 100644 index 000000000..e88059731 --- /dev/null +++ b/keyboards/planck/keymaps/thermal_printer/keymap.c @@ -0,0 +1,314 @@ +// This is the canonical layout file for the Quantum project. If you want to add another keyboard, +// this is the style you want to emulate. + +#include "planck.h" +#include "action_layer.h" +#ifdef AUDIO_ENABLE + #include "audio.h" +#endif +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _PLOVER 5 +#define _ADJUST 16 + +enum planck_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + PLOVER, + LOWER, + RAISE, + BACKLIT, + EXT_PLV +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = { + {KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC}, + {KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = { + {KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC}, + {KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT}, + {KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = { + {KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC}, + {KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH}, + {KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT }, + {BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT} +}, + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = { + {KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC}, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = { + {KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC}, + {KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS}, + {_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY} +}, + +/* Plover layer (http://opensteno.org) + * ,-----------------------------------------------------------------------------------. + * | # | # | # | # | # | # | # | # | # | # | # | # | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | S | T | P | H | * | * | F | P | L | T | D | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * |TogOut| S | K | W | R | * | * | R | B | G | S | Z | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Exit | | | A | O | | E | U | | | | + * `-----------------------------------------------------------------------------------' + */ + +[_PLOVER] = { + {KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 }, + {XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC}, + {XXXXXXX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT}, + {EXT_PLV, XXXXXXX, XXXXXXX, KC_C, KC_V, XXXXXXX, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX} +}, + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | Print|no prnt | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover| | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = { + {_______, RESET, _______, PRINT_ON, PRINT_OFF, _______, _______, _______, _______, _______, _______, KC_DEL}, + {_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______}, + {_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______}, + {_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______} +} + + +}; + +#ifdef AUDIO_ENABLE + +float tone_startup[][2] = SONG(STARTUP_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float tone_plover[][2] = SONG(PLOVER_SOUND); +float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND); +float music_scale[][2] = SONG(MUSIC_SCALE_SOUND); + +float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + } else { + unregister_code(KC_RSFT); + } + return false; + break; + case PLOVER: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + stop_all_notes(); + PLAY_NOTE_ARRAY(tone_plover, false, 0); + #endif + layer_off(_RAISE); + layer_off(_LOWER); + layer_off(_ADJUST); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } + return false; + break; + case EXT_PLV: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_plover_gb, false, 0); + #endif + layer_off(_PLOVER); + } + return false; + break; + } + return true; +} + +void matrix_init_user(void) { + #ifdef AUDIO_ENABLE + startup_user(); + #endif +} + +#ifdef AUDIO_ENABLE + +void startup_user() +{ + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); +} + +void shutdown_user() +{ + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} + +void music_on_user(void) +{ + music_scale_user(); +} + +void music_scale_user(void) +{ + PLAY_NOTE_ARRAY(music_scale, false, 0); +} + +#endif diff --git a/keyboards/planck/keymaps/thermal_printer/readme.md b/keyboards/planck/keymaps/thermal_printer/readme.md new file mode 100644 index 000000000..de9680b49 --- /dev/null +++ b/keyboards/planck/keymaps/thermal_printer/readme.md @@ -0,0 +1,2 @@ +# The Default Planck Layout + diff --git a/keyboards/planck/keymaps/yang/config.h b/keyboards/planck/keymaps/yang/config.h index feb5a1190..4ed19d76f 100644 --- a/keyboards/planck/keymaps/yang/config.h +++ b/keyboards/planck/keymaps/yang/config.h @@ -5,7 +5,7 @@ /* ws2812 RGB LED */ #define RGB_DI_PIN D1 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 28 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/planck/rules.mk b/keyboards/planck/rules.mk index 25db53a31..ccee97271 100644 --- a/keyboards/planck/rules.mk +++ b/keyboards/planck/rules.mk @@ -62,6 +62,7 @@ AUDIO_ENABLE ?= no # Audio output on port C6 UNICODE_ENABLE ?= no # Unicode BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +API_SYSEX_ENABLE = yes # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend \ No newline at end of file diff --git a/keyboards/preonic/config.h b/keyboards/preonic/config.h index 3fb978c2f..f88acf211 100644 --- a/keyboards/preonic/config.h +++ b/keyboards/preonic/config.h @@ -63,7 +63,7 @@ along with this program. If not, see . /* ws2812 RGB LED */ #define RGB_DI_PIN D1 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 28 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/preonic/keymaps/default/Makefile b/keyboards/preonic/keymaps/default/Makefile index 581e08cd0..3d4659ceb 100644 --- a/keyboards/preonic/keymaps/default/Makefile +++ b/keyboards/preonic/keymaps/default/Makefile @@ -1,25 +1,3 @@ - - -# Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically -# -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = yes # Audio output on port C6 -UNICODE_ENABLE = no # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. - -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - ifndef QUANTUM_DIR include ../../../../Makefile endif \ No newline at end of file diff --git a/keyboards/preonic/keymaps/kinesis/config.h b/keyboards/preonic/keymaps/kinesis/config.h index 086baa84f..e6099ceb8 100644 --- a/keyboards/preonic/keymaps/kinesis/config.h +++ b/keyboards/preonic/keymaps/kinesis/config.h @@ -63,7 +63,7 @@ along with this program. If not, see . /* ws2812 RGB LED */ #define RGB_DI_PIN D1 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 28 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/preonic/rules.mk b/keyboards/preonic/rules.mk index d0f3a3a1c..c4ce2aacc 100644 --- a/keyboards/preonic/rules.mk +++ b/keyboards/preonic/rules.mk @@ -53,7 +53,7 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096 # the appropriate keymap folder that will get included automatically # BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000) -MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) CONSOLE_ENABLE ?= no # Console for debug(+400) COMMAND_ENABLE ?= yes # Commands for debug and configuration @@ -64,6 +64,7 @@ AUDIO_ENABLE ?= no # Audio output on port C6 UNICODE_ENABLE ?= no # Unicode BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE ?= no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. +API_SYSEX_ENABLE ?= yes # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend \ No newline at end of file diff --git a/keyboards/satan/config.h b/keyboards/satan/config.h index 7e9f91cc8..eb357b39e 100644 --- a/keyboards/satan/config.h +++ b/keyboards/satan/config.h @@ -67,7 +67,7 @@ along with this program. If not, see . */ #define RGB_DI_PIN E2 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 8 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/keyboards/tada68/config.h b/keyboards/tada68/config.h index 5d8757936..19cf9c9b3 100644 --- a/keyboards/tada68/config.h +++ b/keyboards/tada68/config.h @@ -67,7 +67,7 @@ along with this program. If not, see . */ /*#define RGB_DI_PIN E2 -#define RGBLIGHT_TIMER +#define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 2 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/quantum/api.c b/quantum/api.c new file mode 100644 index 000000000..4ca3b9676 --- /dev/null +++ b/quantum/api.c @@ -0,0 +1,178 @@ +#include "api.h" +#include "quantum.h" + +void dword_to_bytes(uint32_t dword, uint8_t * bytes) { + bytes[0] = (dword >> 24) & 0xFF; + bytes[1] = (dword >> 16) & 0xFF; + bytes[2] = (dword >> 8) & 0xFF; + bytes[3] = (dword >> 0) & 0xFF; +} + +uint32_t bytes_to_dword(uint8_t * bytes, uint8_t index) { + return ((uint32_t)bytes[index + 0] << 24) | ((uint32_t)bytes[index + 1] << 16) | ((uint32_t)bytes[index + 2] << 8) | (uint32_t)bytes[index + 3]; +} + +__attribute__ ((weak)) +bool process_api_quantum(uint8_t length, uint8_t * data) { + return process_api_keyboard(length, data); +} + +__attribute__ ((weak)) +bool process_api_keyboard(uint8_t length, uint8_t * data) { + return process_api_user(length, data); +} + +__attribute__ ((weak)) +bool process_api_user(uint8_t length, uint8_t * data) { + return true; +} + +void process_api(uint16_t length, uint8_t * data) { + // SEND_STRING("\nRX: "); + // for (uint8_t i = 0; i < length; i++) { + // send_byte(data[i]); + // SEND_STRING(" "); + // } + if (!process_api_quantum(length, data)) + return; + + switch (data[0]) { + case MT_SET_DATA: + switch (data[1]) { + case DT_DEFAULT_LAYER: { + eeconfig_update_default_layer(data[2]); + default_layer_set((uint32_t)(data[2])); + break; + } + case DT_KEYMAP_OPTIONS: { + eeconfig_update_keymap(data[2]); + break; + } + case DT_RGBLIGHT: { + #ifdef RGBLIGHT_ENABLE + uint32_t rgblight = bytes_to_dword(data, 2); + rgblight_update_dword(rgblight); + #endif + break; + } + } + case MT_GET_DATA: + switch (data[1]) { + case DT_HANDSHAKE: { + MT_GET_DATA_ACK(DT_HANDSHAKE, NULL, 0); + break; + } + case DT_DEBUG: { + uint8_t debug_bytes[1] = { eeprom_read_byte(EECONFIG_DEBUG) }; + MT_GET_DATA_ACK(DT_DEBUG, debug_bytes, 1); + break; + } + case DT_DEFAULT_LAYER: { + uint8_t default_bytes[1] = { eeprom_read_byte(EECONFIG_DEFAULT_LAYER) }; + MT_GET_DATA_ACK(DT_DEFAULT_LAYER, default_bytes, 1); + break; + } + case DT_CURRENT_LAYER: { + uint8_t layer_state_bytes[4]; + dword_to_bytes(layer_state, layer_state_bytes); + MT_GET_DATA_ACK(DT_CURRENT_LAYER, layer_state_bytes, 4); + break; + } + case DT_AUDIO: { + #ifdef AUDIO_ENABLE + uint8_t audio_bytes[1] = { eeprom_read_byte(EECONFIG_AUDIO) }; + MT_GET_DATA_ACK(DT_AUDIO, audio_bytes, 1); + #else + MT_GET_DATA_ACK(DT_AUDIO, NULL, 0); + #endif + break; + } + case DT_BACKLIGHT: { + #ifdef BACKLIGHT_ENABLE + uint8_t backlight_bytes[1] = { eeprom_read_byte(EECONFIG_BACKLIGHT) }; + MT_GET_DATA_ACK(DT_BACKLIGHT, backlight_bytes, 1); + #else + MT_GET_DATA_ACK(DT_BACKLIGHT, NULL, 0); + #endif + break; + } + case DT_RGBLIGHT: { + #ifdef RGBLIGHT_ENABLE + uint8_t rgblight_bytes[4]; + dword_to_bytes(eeconfig_read_rgblight(), rgblight_bytes); + MT_GET_DATA_ACK(DT_RGBLIGHT, rgblight_bytes, 4); + #else + MT_GET_DATA_ACK(DT_RGBLIGHT, NULL, 0); + #endif + break; + } + case DT_KEYMAP_OPTIONS: { + uint8_t keymap_bytes[1] = { eeconfig_read_keymap() }; + MT_GET_DATA_ACK(DT_KEYMAP_OPTIONS, keymap_bytes, 1); + break; + } + case DT_KEYMAP_SIZE: { + uint8_t keymap_size[2] = {MATRIX_ROWS, MATRIX_COLS}; + MT_GET_DATA_ACK(DT_KEYMAP_SIZE, keymap_size, 2); + break; + } + case DT_KEYMAP: { + uint8_t keymap_data[MATRIX_ROWS * MATRIX_COLS * 4 + 3]; + keymap_data[0] = data[2]; + keymap_data[1] = MATRIX_ROWS; + keymap_data[2] = MATRIX_COLS; + for (int i = 0; i < MATRIX_ROWS; i++) { + for (int j = 0; j < MATRIX_COLS; j++) { + keymap_data[3 + (i*MATRIX_COLS*2) + (j*2)] = pgm_read_word(&keymaps[data[2]][i][j]) >> 8; + keymap_data[3 + (i*MATRIX_COLS*2) + (j*2) + 1] = pgm_read_word(&keymaps[data[2]][i][j]) & 0xFF; + } + } + MT_GET_DATA_ACK(DT_KEYMAP, keymap_data, MATRIX_ROWS * MATRIX_COLS * 4 + 3); + // uint8_t keymap_data[5]; + // keymap_data[0] = data[2]; + // keymap_data[1] = data[3]; + // keymap_data[2] = data[4]; + // keymap_data[3] = pgm_read_word(&keymaps[data[2]][data[3]][data[4]]) >> 8; + // keymap_data[4] = pgm_read_word(&keymaps[data[2]][data[3]][data[4]]) & 0xFF; + + // MT_GET_DATA_ACK(DT_KEYMAP, keymap_data, 5); + break; + } + default: + break; + } + break; + case MT_SET_DATA_ACK: + case MT_GET_DATA_ACK: + break; + case MT_SEND_DATA: + break; + case MT_SEND_DATA_ACK: + break; + case MT_EXE_ACTION: + break; + case MT_EXE_ACTION_ACK: + break; + case MT_TYPE_ERROR: + break; + default: ; // command not recognised + SEND_BYTES(MT_TYPE_ERROR, DT_NONE, data, length); + break; + + // #ifdef RGBLIGHT_ENABLE + // case 0x27: ; // RGB LED functions + // switch (*data++) { + // case 0x00: ; // Update HSV + // rgblight_sethsv((data[0] << 8 | data[1]) % 360, data[2], data[3]); + // break; + // case 0x01: ; // Update RGB + // break; + // case 0x02: ; // Update mode + // rgblight_mode(data[0]); + // break; + // } + // break; + // #endif + } + +} \ No newline at end of file diff --git a/quantum/api.h b/quantum/api.h new file mode 100644 index 000000000..00dcdb895 --- /dev/null +++ b/quantum/api.h @@ -0,0 +1,59 @@ +#ifndef _API_H_ +#define _API_H_ + +#include "lufa.h" + +enum MESSAGE_TYPE { + MT_GET_DATA = 0x10, // Get data from keyboard + MT_GET_DATA_ACK = 0x11, // returned data to process (ACK) + MT_SET_DATA = 0x20, // Set data on keyboard + MT_SET_DATA_ACK = 0x21, // returned data to confirm (ACK) + MT_SEND_DATA = 0x30, // Sending data/action from keyboard + MT_SEND_DATA_ACK = 0x31, // returned data/action confirmation (ACK) + MT_EXE_ACTION = 0x40, // executing actions on keyboard + MT_EXE_ACTION_ACK =0x41, // return confirmation/value (ACK) + MT_TYPE_ERROR = 0x80 // type not recofgnised (ACK) +}; + +enum DATA_TYPE { + DT_NONE = 0x00, + DT_HANDSHAKE, + DT_DEFAULT_LAYER, + DT_CURRENT_LAYER, + DT_KEYMAP_OPTIONS, + DT_BACKLIGHT, + DT_RGBLIGHT, + DT_UNICODE, + DT_DEBUG, + DT_AUDIO, + DT_QUANTUM_ACTION, + DT_KEYBOARD_ACTION, + DT_USER_ACTION, + DT_KEYMAP_SIZE, + DT_KEYMAP +}; + +void dword_to_bytes(uint32_t dword, uint8_t * bytes); +uint32_t bytes_to_dword(uint8_t * bytes, uint8_t index); + +#define MT_GET_DATA(data_type, data, length) SEND_BYTES(MT_GET_DATA, data_type, data, length) +#define MT_GET_DATA_ACK(data_type, data, length) SEND_BYTES(MT_GET_DATA_ACK, data_type, data, length) +#define MT_SET_DATA(data_type, data, length) SEND_BYTES(MT_SET_DATA, data_type, data, length) +#define MT_SET_DATA_ACK(data_type, data, length) SEND_BYTES(MT_SET_DATA_ACK, data_type, data, length) +#define MT_SEND_DATA(data_type, data, length) SEND_BYTES(MT_SEND_DATA, data_type, data, length) +#define MT_SEND_DATA_ACK(data_type, data, length) SEND_BYTES(MT_SEND_DATA_ACK, data_type, data, length) +#define MT_EXE_ACTION(data_type, data, length) SEND_BYTES(MT_EXE_ACTION, data_type, data, length) +#define MT_EXE_ACTION_ACK(data_type, data, length) SEND_BYTES(MT_EXE_ACTION_ACK, data_type, data, length) + +void process_api(uint16_t length, uint8_t * data); + +__attribute__ ((weak)) +bool process_api_quantum(uint8_t length, uint8_t * data); + +__attribute__ ((weak)) +bool process_api_keyboard(uint8_t length, uint8_t * data); + +__attribute__ ((weak)) +bool process_api_user(uint8_t length, uint8_t * data); + +#endif \ No newline at end of file diff --git a/quantum/api/api_sysex.c b/quantum/api/api_sysex.c new file mode 100644 index 000000000..a4a554e76 --- /dev/null +++ b/quantum/api/api_sysex.c @@ -0,0 +1,29 @@ +#include "api_sysex.h" + +void send_bytes_sysex(uint8_t message_type, uint8_t data_type, uint8_t * bytes, uint16_t length) { + // SEND_STRING("\nTX: "); + // for (uint8_t i = 0; i < length; i++) { + // send_byte(bytes[i]); + // SEND_STRING(" "); + // } + uint8_t * precode = malloc(sizeof(uint8_t) * (length + 2)); + precode[0] = message_type; + precode[1] = data_type; + memcpy(precode + 2, bytes, length); + uint8_t * encoded = malloc(sizeof(uint8_t) * (sysex_encoded_length(length + 2))); + uint16_t encoded_length = sysex_encode(encoded, precode, length + 2); + uint8_t * array = malloc(sizeof(uint8_t) * (encoded_length + 5)); + array[0] = 0xF0; + array[1] = 0x00; + array[2] = 0x00; + array[3] = 0x00; + array[encoded_length + 4] = 0xF7; + memcpy(array + 4, encoded, encoded_length); + midi_send_array(&midi_device, encoded_length + 5, array); + + // SEND_STRING("\nTD: "); + // for (uint8_t i = 0; i < encoded_length + 5; i++) { + // send_byte(array[i]); + // SEND_STRING(" "); + // } +} \ No newline at end of file diff --git a/quantum/api/api_sysex.h b/quantum/api/api_sysex.h new file mode 100644 index 000000000..b947b60e5 --- /dev/null +++ b/quantum/api/api_sysex.h @@ -0,0 +1,10 @@ +#ifndef _API_SYSEX_H_ +#define _API_SYSEX_H_ + +#include "api.h" + +void send_bytes_sysex(uint8_t message_type, uint8_t data_type, uint8_t * bytes, uint16_t length); + +#define SEND_BYTES(mt, dt, b, l) send_bytes_sysex(mt, dt, b, l) + +#endif \ No newline at end of file diff --git a/quantum/config_common.h b/quantum/config_common.h index 4d3939dae..17c11faeb 100644 --- a/quantum/config_common.h +++ b/quantum/config_common.h @@ -5,55 +5,56 @@ #define COL2ROW 0 #define ROW2COL 1 /* I/O pins */ -#define B0 0x30 -#define B1 0x31 -#define B2 0x32 -#define B3 0x33 -#define B4 0x34 -#define B5 0x35 -#define B6 0x36 -#define B7 0x37 -#define C0 0x60 -#define C1 0x61 -#define C2 0x62 -#define C3 0x63 -#define C4 0x64 -#define C5 0x65 -#define C6 0x66 -#define C7 0x67 -#define D0 0x90 -#define D1 0x91 -#define D2 0x92 -#define D3 0x93 -#define D4 0x94 -#define D5 0x95 -#define D6 0x96 -#define D7 0x97 -#define E0 0xC0 -#define E1 0xC1 -#define E2 0xC2 -#define E3 0xC3 -#define E4 0xC4 -#define E5 0xC5 -#define E6 0xC6 -#define E7 0xC7 -#define F0 0xF0 -#define F1 0xF1 -#define F2 0xF2 -#define F3 0xF3 -#define F4 0xF4 -#define F5 0xF5 -#define F6 0xF6 -#define F7 0xF7 -#define A0 0x00 -#define A1 0x01 -#define A2 0x02 -#define A3 0x03 -#define A4 0x04 -#define A5 0x05 -#define A6 0x06 -#define A7 0x07 - +#ifndef F0 + #define B0 0x30 + #define B1 0x31 + #define B2 0x32 + #define B3 0x33 + #define B4 0x34 + #define B5 0x35 + #define B6 0x36 + #define B7 0x37 + #define C0 0x60 + #define C1 0x61 + #define C2 0x62 + #define C3 0x63 + #define C4 0x64 + #define C5 0x65 + #define C6 0x66 + #define C7 0x67 + #define D0 0x90 + #define D1 0x91 + #define D2 0x92 + #define D3 0x93 + #define D4 0x94 + #define D5 0x95 + #define D6 0x96 + #define D7 0x97 + #define E0 0xC0 + #define E1 0xC1 + #define E2 0xC2 + #define E3 0xC3 + #define E4 0xC4 + #define E5 0xC5 + #define E6 0xC6 + #define E7 0xC7 + #define F0 0xF0 + #define F1 0xF1 + #define F2 0xF2 + #define F3 0xF3 + #define F4 0xF4 + #define F5 0xF5 + #define F6 0xF6 + #define F7 0xF7 + #define A0 0x00 + #define A1 0x01 + #define A2 0x02 + #define A3 0x03 + #define A4 0x04 + #define A5 0x05 + #define A6 0x06 + #define A7 0x07 +#endif /* USART configuration */ #ifdef BLUETOOTH_ENABLE @@ -79,4 +80,4 @@ # endif #endif -#endif \ No newline at end of file +#endif diff --git a/quantum/keymap.h b/quantum/keymap.h index a01bbfbd1..ae56d16c7 100644 --- a/quantum/keymap.h +++ b/quantum/keymap.h @@ -178,6 +178,10 @@ enum quantum_keycodes { // Right shift, close paren KC_RSPC, + // Printing + PRINT_ON, + PRINT_OFF, + // always leave at the end SAFE_RANGE }; diff --git a/quantum/light_ws2812.c b/quantum/light_ws2812.c index 401845e85..a883b1388 100755 --- a/quantum/light_ws2812.c +++ b/quantum/light_ws2812.c @@ -16,14 +16,128 @@ #include #include "debug.h" +#ifdef RGBW_BB_TWI + +// Port for the I2C +#define I2C_DDR DDRD +#define I2C_PIN PIND +#define I2C_PORT PORTD + +// Pins to be used in the bit banging +#define I2C_CLK 0 +#define I2C_DAT 1 + +#define I2C_DATA_HI()\ +I2C_DDR &= ~ (1 << I2C_DAT);\ +I2C_PORT |= (1 << I2C_DAT); +#define I2C_DATA_LO()\ +I2C_DDR |= (1 << I2C_DAT);\ +I2C_PORT &= ~ (1 << I2C_DAT); + +#define I2C_CLOCK_HI()\ +I2C_DDR &= ~ (1 << I2C_CLK);\ +I2C_PORT |= (1 << I2C_CLK); +#define I2C_CLOCK_LO()\ +I2C_DDR |= (1 << I2C_CLK);\ +I2C_PORT &= ~ (1 << I2C_CLK); + +#define I2C_DELAY 1 + +void I2C_WriteBit(unsigned char c) +{ + if (c > 0) + { + I2C_DATA_HI(); + } + else + { + I2C_DATA_LO(); + } + + I2C_CLOCK_HI(); + _delay_us(I2C_DELAY); + + I2C_CLOCK_LO(); + _delay_us(I2C_DELAY); + + if (c > 0) + { + I2C_DATA_LO(); + } + + _delay_us(I2C_DELAY); +} + +// Inits bitbanging port, must be called before using the functions below +// +void I2C_Init() +{ + I2C_PORT &= ~ ((1 << I2C_DAT) | (1 << I2C_CLK)); + + I2C_CLOCK_HI(); + I2C_DATA_HI(); + + _delay_us(I2C_DELAY); +} + +// Send a START Condition +// +void I2C_Start() +{ + // set both to high at the same time + I2C_DDR &= ~ ((1 << I2C_DAT) | (1 << I2C_CLK)); + _delay_us(I2C_DELAY); + + I2C_DATA_LO(); + _delay_us(I2C_DELAY); + + I2C_CLOCK_LO(); + _delay_us(I2C_DELAY); +} + +// Send a STOP Condition +// +void I2C_Stop() +{ + I2C_CLOCK_HI(); + _delay_us(I2C_DELAY); + + I2C_DATA_HI(); + _delay_us(I2C_DELAY); +} + +// write a byte to the I2C slave device +// +unsigned char I2C_Write(unsigned char c) +{ + for (char i = 0; i < 8; i++) + { + I2C_WriteBit(c & 128); + + c <<= 1; + } + + + I2C_WriteBit(0); + _delay_us(I2C_DELAY); + _delay_us(I2C_DELAY); + + // _delay_us(I2C_DELAY); + //return I2C_ReadBit(); + return 0; +} + + +#endif + // Setleds for standard RGB -void inline ws2812_setleds(struct cRGB *ledarray, uint16_t leds) +void inline ws2812_setleds(LED_TYPE *ledarray, uint16_t leds) { // ws2812_setleds_pin(ledarray,leds, _BV(ws2812_pin)); ws2812_setleds_pin(ledarray,leds, _BV(RGB_DI_PIN & 0xF)); } -void inline ws2812_setleds_pin(struct cRGB *ledarray, uint16_t leds, uint8_t pinmask) +void inline ws2812_setleds_pin(LED_TYPE *ledarray, uint16_t leds, uint8_t pinmask) { // ws2812_DDRREG |= pinmask; // Enable DDR // new universal format (DDR) @@ -34,14 +148,41 @@ void inline ws2812_setleds_pin(struct cRGB *ledarray, uint16_t leds, uint8_t pin } // Setleds for SK6812RGBW -void inline ws2812_setleds_rgbw(struct cRGBW *ledarray, uint16_t leds) +void inline ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t leds) { + + #ifdef RGBW_BB_TWI + uint8_t sreg_prev, twcr_prev; + sreg_prev=SREG; + twcr_prev=TWCR; + cli(); + TWCR &= ~(1<> 4) + 1) |= _BV(RGB_DI_PIN & 0xF); ws2812_sendarray_mask((uint8_t*)ledarray,leds<<2,_BV(RGB_DI_PIN & 0xF)); - _delay_us(80); + + + #ifndef RGBW_BB_TWI + _delay_us(80); + #endif } void ws2812_sendarray(uint8_t *data,uint16_t datlen) @@ -123,7 +264,7 @@ void inline ws2812_sendarray_mask(uint8_t *data,uint16_t datlen,uint8_t maskhi) cli(); while (datlen--) { - curbyte=*data++; + curbyte=(*data++); asm volatile( " ldi %0,8 \n\t" diff --git a/quantum/light_ws2812.h b/quantum/light_ws2812.h index 54eef22d9..9498e550e 100755 --- a/quantum/light_ws2812.h +++ b/quantum/light_ws2812.h @@ -16,6 +16,21 @@ #include #include //#include "ws2812_config.h" +//#include "i2cmaster.h" + +#define LIGHT_I2C 1 +#define LIGHT_I2C_ADDR 0x84 +#define LIGHT_I2C_ADDR_WRITE ( (LIGHT_I2C_ADDR<<1) | I2C_WRITE ) +#define LIGHT_I2C_ADDR_READ ( (LIGHT_I2C_ADDR<<1) | I2C_READ ) + +#define RGBW 1 + +#ifdef RGBW + #define LED_TYPE struct cRGBW +#else + #define LED_TYPE struct cRGB +#endif + /* * Structure of the LED array @@ -42,9 +57,9 @@ struct cRGBW { uint8_t g; uint8_t r; uint8_t b; uint8_t w;}; * - Wait 50�s to reset the LEDs */ -void ws2812_setleds (struct cRGB *ledarray, uint16_t number_of_leds); -void ws2812_setleds_pin (struct cRGB *ledarray, uint16_t number_of_leds,uint8_t pinmask); -void ws2812_setleds_rgbw(struct cRGBW *ledarray, uint16_t number_of_leds); +void ws2812_setleds (LED_TYPE *ledarray, uint16_t number_of_leds); +void ws2812_setleds_pin (LED_TYPE *ledarray, uint16_t number_of_leds,uint8_t pinmask); +void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds); /* * Old interface / Internal functions diff --git a/quantum/process_keycode/process_printer.c b/quantum/process_keycode/process_printer.c new file mode 100644 index 000000000..2e11dd366 --- /dev/null +++ b/quantum/process_keycode/process_printer.c @@ -0,0 +1,254 @@ +#include "process_printer.h" +#include "action_util.h" + +bool printing_enabled = false; +uint8_t character_shift = 0; + +void enabled_printing() { + printing_enabled = true; + serial_init(); +} + +void disable_printing() { + printing_enabled = false; +} + +uint8_t shifted_numbers[10] = {0x21, 0x40, 0x23, 0x24, 0x25, 0x5E, 0x26, 0x2A, 0x28, 0x29}; + +// uint8_t keycode_to_ascii[0xFF][2]; + +// keycode_to_ascii[KC_MINS] = {0x2D, 0x5F}; + +void print_char(char c) { + USB_Disable(); + serial_send(c); + USB_Init(); +} + +void print_box_string(uint8_t text[]) { + uint8_t len = strlen(text); + uint8_t out[len * 3 + 8]; + out[0] = 0xDA; + for (uint8_t i = 0; i < len; i++) { + out[i+1] = 0xC4; + } + out[len + 1] = 0xBF; + out[len + 2] = '\n'; + + out[len + 3] = 0xB3; + for (uint8_t i = 0; i < len; i++) { + out[len + 4 + i] = text[i]; + } + out[len * 2 + 4] = 0xB3; + out[len * 2 + 5] = '\n'; + + + out[len * 2 + 6] = 0xC0; + for (uint8_t i = 0; i < len; i++) { + out[len * 2 + 7 + i] = 0xC4; + } + out[len * 3 + 7] = 0xD9; + out[len * 3 + 8] = '\n'; + + print_string(out); +} + +void print_string(char c[]) { + for(uint8_t i = 0; i < strlen(c); i++) + print_char(c[i]); +} + +bool process_printer(uint16_t keycode, keyrecord_t *record) { + if (keycode == PRINT_ON) { + enabled_printing(); + return false; + } + if (keycode == PRINT_OFF) { + disable_printing(); + return false; + } + + if (printing_enabled) { + switch(keycode) { + case KC_EXLM ... KC_RPRN: + case KC_UNDS: + case KC_PLUS: + case KC_LCBR: + case KC_RCBR: + case KC_PIPE: + case KC_TILD: + keycode &= 0xFF; + case KC_LSFT: + case KC_RSFT: + if (record->event.pressed) { + character_shift++; + } else { + character_shift--; + } + return false; + break; + } + + switch(keycode) { + case KC_F1: + if (record->event.pressed) { + print_box_string("This is a line of text!"); + } + return false; + case KC_ESC: + if (record->event.pressed) { + print_char(0x1B); + } + return false; + break; + case KC_SPC: + if (record->event.pressed) { + print_char(0x20); + } + return false; + break; + case KC_A ... KC_Z: + if (record->event.pressed) { + if (character_shift) { + print_char(0x41 + (keycode - KC_A)); + } else { + print_char(0x61 + (keycode - KC_A)); + } + } + return false; + break; + case KC_1 ... KC_0: + if (record->event.pressed) { + if (character_shift) { + print_char(shifted_numbers[keycode - KC_1]); + } else { + print_char(0x30 + ((keycode - KC_1 + 1) % 10)); + } + } + return false; + break; + case KC_ENT: + if (record->event.pressed) { + if (character_shift) { + print_char(0x0C); + } else { + print_char(0x0A); + } + } + return false; + break; + case KC_BSPC: + if (record->event.pressed) { + if (character_shift) { + print_char(0x18); + } else { + print_char(0x1A); + } + } + return false; + break; + case KC_DOT: + if (record->event.pressed) { + if (character_shift) { + print_char(0x3E); + } else { + print_char(0x2E); + } + } + return false; + break; + case KC_COMM: + if (record->event.pressed) { + if (character_shift) { + print_char(0x3C); + } else { + print_char(0x2C); + } + } + return false; + break; + case KC_SLSH: + if (record->event.pressed) { + if (character_shift) { + print_char(0x3F); + } else { + print_char(0x2F); + } + } + return false; + break; + case KC_QUOT: + if (record->event.pressed) { + if (character_shift) { + print_char(0x22); + } else { + print_char(0x27); + } + } + return false; + break; + case KC_GRV: + if (record->event.pressed) { + if (character_shift) { + print_char(0x7E); + } else { + print_char(0x60); + } + } + return false; + break; + case KC_MINS: + if (record->event.pressed) { + if (character_shift) { + print_char(0x5F); + } else { + print_char(0x2D); + } + } + return false; + break; + case KC_EQL: + if (record->event.pressed) { + if (character_shift) { + print_char(0x2B); + } else { + print_char(0x3D); + } + } + return false; + break; + case KC_LBRC: + if (record->event.pressed) { + if (character_shift) { + print_char(0x7B); + } else { + print_char(0x5B); + } + } + return false; + break; + case KC_RBRC: + if (record->event.pressed) { + if (character_shift) { + print_char(0x7D); + } else { + print_char(0x5D); + } + } + return false; + break; + case KC_BSLS: + if (record->event.pressed) { + if (character_shift) { + print_char(0x7C); + } else { + print_char(0x5C); + } + } + return false; + break; + } + } + return true; + +} \ No newline at end of file diff --git a/quantum/process_keycode/process_printer.h b/quantum/process_keycode/process_printer.h new file mode 100644 index 000000000..fdd36d75a --- /dev/null +++ b/quantum/process_keycode/process_printer.h @@ -0,0 +1,8 @@ +#ifndef PROCESS_PRINTER_H +#define PROCESS_PRINTER_H + +#include "quantum.h" + +#include "protocol/serial.h" + +#endif \ No newline at end of file diff --git a/quantum/process_keycode/process_printer_bb.c b/quantum/process_keycode/process_printer_bb.c new file mode 100644 index 000000000..1924d0377 --- /dev/null +++ b/quantum/process_keycode/process_printer_bb.c @@ -0,0 +1,260 @@ +#include "process_printer.h" +#include "action_util.h" + +bool printing_enabled = false; +uint8_t character_shift = 0; + +#define SERIAL_PIN_DDR DDRD +#define SERIAL_PIN_PORT PORTD +#define SERIAL_PIN_MASK _BV(PD3) +#define SERIAL_DELAY 52 + +inline static +void serial_delay(void) { + _delay_us(SERIAL_DELAY); +} + +inline static +void serial_high(void) { + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +inline static +void serial_low(void) { + SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; +} + +inline static +void serial_output(void) { + SERIAL_PIN_DDR |= SERIAL_PIN_MASK; +} + + +void enabled_printing() { + printing_enabled = true; + serial_output(); + serial_high(); +} + +void disable_printing() { + printing_enabled = false; +} + +uint8_t shifted_numbers[10] = {0x21, 0x40, 0x23, 0x24, 0x25, 0x5E, 0x26, 0x2A, 0x28, 0x29}; + +// uint8_t keycode_to_ascii[0xFF][2]; + +// keycode_to_ascii[KC_MINS] = {0x2D, 0x5F}; + +void print_char(char c) { + uint8_t b = 8; + serial_output(); + while( b-- ) { + if(c & (1 << b)) { + serial_high(); + } else { + serial_low(); + } + serial_delay(); + } +} + +void print_string(char c[]) { + for(uint8_t i = 0; i < strlen(c); i++) + print_char(c[i]); +} + +bool process_printer(uint16_t keycode, keyrecord_t *record) { + if (keycode == PRINT_ON) { + enabled_printing(); + return false; + } + if (keycode == PRINT_OFF) { + disable_printing(); + return false; + } + + if (printing_enabled) { + switch(keycode) { + case KC_EXLM ... KC_RPRN: + case KC_UNDS: + case KC_PLUS: + case KC_LCBR: + case KC_RCBR: + case KC_PIPE: + case KC_TILD: + keycode &= 0xFF; + case KC_LSFT: + case KC_RSFT: + if (record->event.pressed) { + character_shift++; + } else { + character_shift--; + } + return false; + break; + } + + switch(keycode) { + case KC_F1: + if (record->event.pressed) { + print_string("This is a line of text!\n\n\n"); + } + return false; + case KC_ESC: + if (record->event.pressed) { + print_char(0x1B); + } + return false; + break; + case KC_SPC: + if (record->event.pressed) { + print_char(0x20); + } + return false; + break; + case KC_A ... KC_Z: + if (record->event.pressed) { + if (character_shift) { + print_char(0x41 + (keycode - KC_A)); + } else { + print_char(0x61 + (keycode - KC_A)); + } + } + return false; + break; + case KC_1 ... KC_0: + if (record->event.pressed) { + if (character_shift) { + print_char(shifted_numbers[keycode - KC_1]); + } else { + print_char(0x30 + ((keycode - KC_1 + 1) % 10)); + } + } + return false; + break; + case KC_ENT: + if (record->event.pressed) { + if (character_shift) { + print_char(0x0C); + } else { + print_char(0x0A); + } + } + return false; + break; + case KC_BSPC: + if (record->event.pressed) { + if (character_shift) { + print_char(0x18); + } else { + print_char(0x1A); + } + } + return false; + break; + case KC_DOT: + if (record->event.pressed) { + if (character_shift) { + print_char(0x3E); + } else { + print_char(0x2E); + } + } + return false; + break; + case KC_COMM: + if (record->event.pressed) { + if (character_shift) { + print_char(0x3C); + } else { + print_char(0x2C); + } + } + return false; + break; + case KC_SLSH: + if (record->event.pressed) { + if (character_shift) { + print_char(0x3F); + } else { + print_char(0x2F); + } + } + return false; + break; + case KC_QUOT: + if (record->event.pressed) { + if (character_shift) { + print_char(0x22); + } else { + print_char(0x27); + } + } + return false; + break; + case KC_GRV: + if (record->event.pressed) { + if (character_shift) { + print_char(0x7E); + } else { + print_char(0x60); + } + } + return false; + break; + case KC_MINS: + if (record->event.pressed) { + if (character_shift) { + print_char(0x5F); + } else { + print_char(0x2D); + } + } + return false; + break; + case KC_EQL: + if (record->event.pressed) { + if (character_shift) { + print_char(0x2B); + } else { + print_char(0x3D); + } + } + return false; + break; + case KC_LBRC: + if (record->event.pressed) { + if (character_shift) { + print_char(0x7B); + } else { + print_char(0x5B); + } + } + return false; + break; + case KC_RBRC: + if (record->event.pressed) { + if (character_shift) { + print_char(0x7D); + } else { + print_char(0x5D); + } + } + return false; + break; + case KC_BSLS: + if (record->event.pressed) { + if (character_shift) { + print_char(0x7C); + } else { + print_char(0x5C); + } + } + return false; + break; + } + } + return true; + +} \ No newline at end of file diff --git a/quantum/quantum.c b/quantum/quantum.c index b5e2d60b9..f653564a6 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -134,6 +134,9 @@ bool process_record_quantum(keyrecord_t *record) { #ifdef UCIS_ENABLE process_ucis(keycode, record) && #endif + #ifdef PRINTING_ENABLE + process_printer(keycode, record) && + #endif #ifdef UNICODEMAP_ENABLE process_unicode_map(keycode, record) && #endif @@ -806,6 +809,51 @@ void backlight_set(uint8_t level) #endif // backlight +// Functions for spitting out values +// + +void send_dword(uint32_t number) { // this might not actually work + uint16_t word = (number >> 16); + send_word(word); + send_word(number & 0xFFFFUL); +} + +void send_word(uint16_t number) { + uint8_t byte = number >> 8; + send_byte(byte); + send_byte(number & 0xFF); +} + +void send_byte(uint8_t number) { + uint8_t nibble = number >> 4; + send_nibble(nibble); + send_nibble(number & 0xF); +} + +void send_nibble(uint8_t number) { + switch (number) { + case 0: + register_code(KC_0); + unregister_code(KC_0); + break; + case 1 ... 9: + register_code(KC_1 + (number - 1)); + unregister_code(KC_1 + (number - 1)); + break; + case 0xA ... 0xF: + register_code(KC_A + (number - 0xA)); + unregister_code(KC_A + (number - 0xA)); + break; + } +} + +void api_send_unicode(uint32_t unicode) { +#ifdef API_ENABLE + uint8_t chunk[4]; + dword_to_bytes(unicode, chunk); + MT_SEND_DATA(DT_UNICODE, chunk, 5); +#endif +} __attribute__ ((weak)) void led_set_user(uint8_t usb_led) { diff --git a/quantum/quantum.h b/quantum/quantum.h index 0c6046649..e6adf974a 100644 --- a/quantum/quantum.h +++ b/quantum/quantum.h @@ -59,6 +59,10 @@ extern uint32_t default_layer_state; #include "process_tap_dance.h" +#ifdef PRINTING_ENABLE + #include "process_printer.h" +#endif + #define SEND_STRING(str) send_string(PSTR(str)) void send_string(const char *str); @@ -106,8 +110,15 @@ void breathing_speed_dec(uint8_t value); #endif #endif +void send_dword(uint32_t number); +void send_word(uint16_t number); +void send_byte(uint8_t number); +void send_nibble(uint8_t number); + void led_set_user(uint8_t usb_led); void led_set_kb(uint8_t usb_led); +void api_send_unicode(uint32_t unicode); + #endif diff --git a/quantum/rgblight.c b/quantum/rgblight.c index d550c5866..625971e0f 100644 --- a/quantum/rgblight.c +++ b/quantum/rgblight.c @@ -69,11 +69,12 @@ const uint8_t RGBLED_KNIGHT_INTERVALS[] PROGMEM = {100, 50, 20}; rgblight_config_t rgblight_config; rgblight_config_t inmem_config; -struct cRGB led[RGBLED_NUM]; + +LED_TYPE led[RGBLED_NUM]; uint8_t rgblight_inited = 0; +bool rgblight_timer_enabled = false; - -void sethsv(uint16_t hue, uint8_t sat, uint8_t val, struct cRGB *led1) { +void sethsv(uint16_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1) { uint8_t r = 0, g = 0, b = 0, base, color; if (sat == 0) { // Acromatic color (gray). Hue doesn't mind. @@ -124,7 +125,7 @@ void sethsv(uint16_t hue, uint8_t sat, uint8_t val, struct cRGB *led1) { setrgb(r, g, b, led1); } -void setrgb(uint8_t r, uint8_t g, uint8_t b, struct cRGB *led1) { +void setrgb(uint8_t r, uint8_t g, uint8_t b, LED_TYPE *led1) { (*led1).r = r; (*led1).g = g; (*led1).b = b; @@ -141,9 +142,9 @@ void eeconfig_update_rgblight_default(void) { dprintf("eeconfig_update_rgblight_default\n"); rgblight_config.enable = 1; rgblight_config.mode = 1; - rgblight_config.hue = 200; - rgblight_config.sat = 204; - rgblight_config.val = 204; + rgblight_config.hue = 0; + rgblight_config.sat = 255; + rgblight_config.val = 255; eeconfig_update_rgblight(rgblight_config.raw); } void eeconfig_debug_rgblight(void) { @@ -173,7 +174,7 @@ void rgblight_init(void) { } eeconfig_debug_rgblight(); // display current eeprom values - #if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) + #ifdef RGBLIGHT_ANIMATIONS rgblight_timer_init(); // setup the timer #endif @@ -182,6 +183,19 @@ void rgblight_init(void) { } } +void rgblight_update_dword(uint32_t dword) { + rgblight_config.raw = dword; + eeconfig_update_rgblight(rgblight_config.raw); + if (rgblight_config.enable) + rgblight_mode(rgblight_config.mode); + else { + #ifdef RGBLIGHT_ANIMATIONS + rgblight_timer_disable(); + #endif + rgblight_set(); + } +} + void rgblight_increase(void) { uint8_t mode = 0; if (rgblight_config.mode < RGBLIGHT_MODES) { @@ -220,7 +234,7 @@ void rgblight_mode(uint8_t mode) { eeconfig_update_rgblight(rgblight_config.raw); xprintf("rgblight mode: %u\n", rgblight_config.mode); if (rgblight_config.mode == 1) { - #if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) + #ifdef RGBLIGHT_ANIMATIONS rgblight_timer_disable(); #endif } else if (rgblight_config.mode >= 2 && rgblight_config.mode <= 23) { @@ -230,7 +244,7 @@ void rgblight_mode(uint8_t mode) { // MODE 15-20, snake // MODE 21-23, knight - #if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) + #ifdef RGBLIGHT_ANIMATIONS rgblight_timer_enable(); #endif } @@ -244,7 +258,7 @@ void rgblight_toggle(void) { if (rgblight_config.enable) { rgblight_mode(rgblight_config.mode); } else { - #if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) + #ifdef RGBLIGHT_ANIMATIONS rgblight_timer_disable(); #endif _delay_ms(50); @@ -252,6 +266,13 @@ void rgblight_toggle(void) { } } +void rgblight_enable(void) { + rgblight_config.enable = 1; + eeconfig_update_rgblight(rgblight_config.raw); + xprintf("rgblight enable: rgblight_config.enable = %u\n", rgblight_config.enable); + rgblight_mode(rgblight_config.mode); +} + void rgblight_increase_hue(void) { uint16_t hue; @@ -307,7 +328,7 @@ void rgblight_decrease_val(void) { void rgblight_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val) { inmem_config.raw = rgblight_config.raw; if (rgblight_config.enable) { - struct cRGB tmp_led; + LED_TYPE tmp_led; sethsv(hue, sat, val, &tmp_led); inmem_config.hue = hue; inmem_config.sat = sat; @@ -351,66 +372,84 @@ void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b) { void rgblight_set(void) { if (rgblight_config.enable) { - ws2812_setleds(led, RGBLED_NUM); + #ifdef RGBW + ws2812_setleds_rgbw(led, RGBLED_NUM); + #else + ws2812_setleds(led, RGBLED_NUM); + #endif } else { for (uint8_t i = 0; i < RGBLED_NUM; i++) { led[i].r = 0; led[i].g = 0; led[i].b = 0; } - ws2812_setleds(led, RGBLED_NUM); + #ifdef RGBW + ws2812_setleds_rgbw(led, RGBLED_NUM); + #else + ws2812_setleds(led, RGBLED_NUM); + #endif } } -#if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) +#ifdef RGBLIGHT_ANIMATIONS // Animation timer -- AVR Timer3 void rgblight_timer_init(void) { - static uint8_t rgblight_timer_is_init = 0; - if (rgblight_timer_is_init) { - return; - } - rgblight_timer_is_init = 1; - /* Timer 3 setup */ - TCCR3B = _BV(WGM32) //CTC mode OCR3A as TOP - | _BV(CS30); //Clock selelct: clk/1 - /* Set TOP value */ - uint8_t sreg = SREG; - cli(); - OCR3AH = (RGBLED_TIMER_TOP >> 8) & 0xff; - OCR3AL = RGBLED_TIMER_TOP & 0xff; - SREG = sreg; + // static uint8_t rgblight_timer_is_init = 0; + // if (rgblight_timer_is_init) { + // return; + // } + // rgblight_timer_is_init = 1; + // /* Timer 3 setup */ + // TCCR3B = _BV(WGM32) // CTC mode OCR3A as TOP + // | _BV(CS30); // Clock selelct: clk/1 + // /* Set TOP value */ + // uint8_t sreg = SREG; + // cli(); + // OCR3AH = (RGBLED_TIMER_TOP >> 8) & 0xff; + // OCR3AL = RGBLED_TIMER_TOP & 0xff; + // SREG = sreg; + + rgblight_timer_enabled = true; } void rgblight_timer_enable(void) { - TIMSK3 |= _BV(OCIE3A); + rgblight_timer_enabled = true; dprintf("TIMER3 enabled.\n"); } void rgblight_timer_disable(void) { - TIMSK3 &= ~_BV(OCIE3A); + rgblight_timer_enabled = false; dprintf("TIMER3 disabled.\n"); } void rgblight_timer_toggle(void) { - TIMSK3 ^= _BV(OCIE3A); + rgblight_timer_enabled ^= rgblight_timer_enabled; dprintf("TIMER3 toggled.\n"); } -ISR(TIMER3_COMPA_vect) { - // mode = 1, static light, do nothing here - if (rgblight_config.mode >= 2 && rgblight_config.mode <= 5) { - // mode = 2 to 5, breathing mode - rgblight_effect_breathing(rgblight_config.mode - 2); - } else if (rgblight_config.mode >= 6 && rgblight_config.mode <= 8) { - // mode = 6 to 8, rainbow mood mod - rgblight_effect_rainbow_mood(rgblight_config.mode - 6); - } else if (rgblight_config.mode >= 9 && rgblight_config.mode <= 14) { - // mode = 9 to 14, rainbow swirl mode - rgblight_effect_rainbow_swirl(rgblight_config.mode - 9); - } else if (rgblight_config.mode >= 15 && rgblight_config.mode <= 20) { - // mode = 15 to 20, snake mode - rgblight_effect_snake(rgblight_config.mode - 15); - } else if (rgblight_config.mode >= 21 && rgblight_config.mode <= 23) { - // mode = 21 to 23, knight mode - rgblight_effect_knight(rgblight_config.mode - 21); +void rgblight_show_solid_color(uint8_t r, uint8_t g, uint8_t b) { + rgblight_enable(); + rgblight_mode(1); + rgblight_setrgb(r, g, b); +} + +void rgblight_task(void) { + if (rgblight_timer_enabled) { + // mode = 1, static light, do nothing here + if (rgblight_config.mode >= 2 && rgblight_config.mode <= 5) { + // mode = 2 to 5, breathing mode + rgblight_effect_breathing(rgblight_config.mode - 2); + } else if (rgblight_config.mode >= 6 && rgblight_config.mode <= 8) { + // mode = 6 to 8, rainbow mood mod + rgblight_effect_rainbow_mood(rgblight_config.mode - 6); + } else if (rgblight_config.mode >= 9 && rgblight_config.mode <= 14) { + // mode = 9 to 14, rainbow swirl mode + rgblight_effect_rainbow_swirl(rgblight_config.mode - 9); + } else if (rgblight_config.mode >= 15 && rgblight_config.mode <= 20) { + // mode = 15 to 20, snake mode + rgblight_effect_snake(rgblight_config.mode - 15); + } else if (rgblight_config.mode >= 21 && rgblight_config.mode <= 23) { + // mode = 21 to 23, knight mode + rgblight_effect_knight(rgblight_config.mode - 21); + } } } @@ -449,7 +488,7 @@ void rgblight_effect_rainbow_swirl(uint8_t interval) { last_timer = timer_read(); for (i = 0; i < RGBLED_NUM; i++) { hue = (360 / RGBLED_NUM * i + current_hue) % 360; - sethsv(hue, rgblight_config.sat, rgblight_config.val, &led[i]); + sethsv(hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&led[i]); } rgblight_set(); @@ -486,7 +525,7 @@ void rgblight_effect_snake(uint8_t interval) { k = k + RGBLED_NUM; } if (i == k) { - sethsv(rgblight_config.hue, rgblight_config.sat, (uint8_t)(rgblight_config.val*(RGBLIGHT_EFFECT_SNAKE_LENGTH-j)/RGBLIGHT_EFFECT_SNAKE_LENGTH), &led[i]); + sethsv(rgblight_config.hue, rgblight_config.sat, (uint8_t)(rgblight_config.val*(RGBLIGHT_EFFECT_SNAKE_LENGTH-j)/RGBLIGHT_EFFECT_SNAKE_LENGTH), (LED_TYPE *)&led[i]); } } } @@ -506,7 +545,7 @@ void rgblight_effect_knight(uint8_t interval) { static uint16_t last_timer = 0; uint8_t i, j, cur; int8_t k; - struct cRGB preled[RGBLED_NUM]; + LED_TYPE preled[RGBLED_NUM]; static int8_t increment = -1; if (timer_elapsed(last_timer) < pgm_read_byte(&RGBLED_KNIGHT_INTERVALS[interval])) { return; @@ -525,7 +564,7 @@ void rgblight_effect_knight(uint8_t interval) { k = RGBLED_NUM - 1; } if (i == k) { - sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, &preled[i]); + sethsv(rgblight_config.hue, rgblight_config.sat, rgblight_config.val, (LED_TYPE *)&preled[i]); } } } diff --git a/quantum/rgblight.h b/quantum/rgblight.h index 17f04ffcf..aa1d026e0 100644 --- a/quantum/rgblight.h +++ b/quantum/rgblight.h @@ -1,8 +1,7 @@ #ifndef RGBLIGHT_H #define RGBLIGHT_H - -#if !defined(AUDIO_ENABLE) && defined(RGBLIGHT_TIMER) +#ifdef RGBLIGHT_ANIMATIONS #define RGBLIGHT_MODES 23 #else #define RGBLIGHT_MODES 1 @@ -34,6 +33,7 @@ #endif #define RGBLED_TIMER_TOP F_CPU/(256*64) +// #define RGBLED_TIMER_TOP 0xFF10 #include #include @@ -61,9 +61,11 @@ void rgblight_init(void); void rgblight_increase(void); void rgblight_decrease(void); void rgblight_toggle(void); +void rgblight_enable(void); void rgblight_step(void); void rgblight_mode(uint8_t mode); void rgblight_set(void); +void rgblight_update_dword(uint32_t dword); void rgblight_increase_hue(void); void rgblight_decrease_hue(void); void rgblight_increase_sat(void); @@ -78,10 +80,15 @@ void eeconfig_update_rgblight(uint32_t val); void eeconfig_update_rgblight_default(void); void eeconfig_debug_rgblight(void); -void sethsv(uint16_t hue, uint8_t sat, uint8_t val, struct cRGB *led1); -void setrgb(uint8_t r, uint8_t g, uint8_t b, struct cRGB *led1); +void sethsv(uint16_t hue, uint8_t sat, uint8_t val, LED_TYPE *led1); +void setrgb(uint8_t r, uint8_t g, uint8_t b, LED_TYPE *led1); void rgblight_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val); +#define EZ_RGB(val) rgblight_show_solid_color((val >> 16) & 0xFF, (val >> 8) & 0xFF, val & 0xFF) +void rgblight_show_solid_color(uint8_t r, uint8_t g, uint8_t b); + +void rgblight_task(void); + void rgblight_timer_init(void); void rgblight_timer_enable(void); void rgblight_timer_disable(void); diff --git a/readme.md b/readme.md index cd65e0e69..a92ae4c1d 100644 --- a/readme.md +++ b/readme.md @@ -1162,12 +1162,12 @@ For this mod, you need an unused pin wiring to DI of WS2812 strip. After wiring RGBLIGHT_ENABLE = yes -In order to use the underglow timer functions, you need to have `#define RGBLIGHT_TIMER` in your `config.h`, and have audio disabled (`AUDIO_ENABLE = no` in your Makefile). +In order to use the underglow animation functions, you need to have `#define RGBLIGHT_ANIMATIONS` in your `config.h`. Please add the following options into your config.h, and set them up according your hardware configuration. These settings are for the `F4` pin by default: #define RGB_DI_PIN F4 // The pin your RGB strip is wired to - #define RGBLIGHT_TIMER // Require for fancier stuff (not compatible with audio) + #define RGBLIGHT_ANIMATIONS // Require for fancier stuff (not compatible with audio) #define RGBLED_NUM 14 // Number of LEDs #define RGBLIGHT_HUE_STEP 10 #define RGBLIGHT_SAT_STEP 17 diff --git a/tmk_core/common/host_driver.h b/tmk_core/common/host_driver.h index edb9e5dd9..588d1c0be 100644 --- a/tmk_core/common/host_driver.h +++ b/tmk_core/common/host_driver.h @@ -20,7 +20,9 @@ along with this program. If not, see . #include #include "report.h" - +#ifdef MIDI_ENABLE + #include "midi.h" +#endif typedef struct { uint8_t (*keyboard_leds)(void); @@ -28,6 +30,11 @@ typedef struct { void (*send_mouse)(report_mouse_t *); void (*send_system)(uint16_t); void (*send_consumer)(uint16_t); +#ifdef MIDI_ENABLE + void (*usb_send_func)(MidiDevice *, uint16_t, uint8_t, uint8_t, uint8_t); + void (*usb_get_midi)(MidiDevice *); + void (*midi_usb_init)(MidiDevice *); +#endif } host_driver_t; #endif diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index 01c0e45b0..39d4824b6 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -51,6 +51,7 @@ #include "descriptor.h" #include "lufa.h" +#include "quantum.h" #ifdef NKRO_ENABLE #include "keycode_config.h" @@ -71,6 +72,14 @@ #include "virtser.h" #endif +#if (defined(RGB_MIDI) | defined(RGBLIGHT_ANIMATIONS)) & defined(RGBLIGHT_ENABLE) + #include "rgblight.h" +#endif + +#ifdef MIDI_ENABLE + #include "sysex_tools.h" +#endif + uint8_t keyboard_idle = 0; /* 0: Boot Protocol, 1: Report Protocol(default) */ uint8_t keyboard_protocol = 1; @@ -79,9 +88,9 @@ static uint8_t keyboard_led_stats = 0; static report_keyboard_t keyboard_report_sent; #ifdef MIDI_ENABLE -void usb_send_func(MidiDevice * device, uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2); -void usb_get_midi(MidiDevice * device); -void midi_usb_init(MidiDevice * device); +static void usb_send_func(MidiDevice * device, uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2); +static void usb_get_midi(MidiDevice * device); +static void midi_usb_init(MidiDevice * device); #endif /* Host driver */ @@ -709,7 +718,7 @@ int8_t sendchar(uint8_t c) ******************************************************************************/ #ifdef MIDI_ENABLE -void usb_send_func(MidiDevice * device, uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2) { +static void usb_send_func(MidiDevice * device, uint16_t cnt, uint8_t byte0, uint8_t byte1, uint8_t byte2) { MIDI_EventPacket_t event; event.Data1 = byte0; event.Data2 = byte1; @@ -769,7 +778,7 @@ void usb_send_func(MidiDevice * device, uint16_t cnt, uint8_t byte0, uint8_t byt USB_USBTask(); } -void usb_get_midi(MidiDevice * device) { +static void usb_get_midi(MidiDevice * device) { MIDI_EventPacket_t event; while (MIDI_Device_ReceiveEventPacket(&USB_MIDI_Interface, &event)) { @@ -799,12 +808,12 @@ void usb_get_midi(MidiDevice * device) { USB_USBTask(); } -void midi_usb_init(MidiDevice * device){ +static void midi_usb_init(MidiDevice * device){ midi_device_init(device); midi_device_set_send_func(device, usb_send_func); midi_device_set_pre_input_process_func(device, usb_get_midi); - SetupHardware(); + // SetupHardware(); sei(); } @@ -1039,11 +1048,16 @@ int main(void) } #endif + keyboard_task(); + #ifdef MIDI_ENABLE midi_device_process(&midi_device); // MIDI_Task(); #endif - keyboard_task(); + +#if defined(RGBLIGHT_ANIMATIONS) & defined(RGBLIGHT_ENABLE) + rgblight_task(); +#endif #ifdef VIRTSER_ENABLE virtser_task(); @@ -1077,15 +1091,38 @@ void fallthrough_callback(MidiDevice * device, #endif } + void cc_callback(MidiDevice * device, uint8_t chan, uint8_t num, uint8_t val) { //sending it back on the next channel - midi_send_cc(device, (chan + 1) % 16, num, val); + // midi_send_cc(device, (chan + 1) % 16, num, val); } -void sysex_callback(MidiDevice * device, - uint16_t start, uint8_t length, uint8_t * data) { - for (int i = 0; i < length; i++) - midi_send_cc(device, 15, 0x7F & data[i], 0x7F & (start + i)); +uint8_t midi_buffer[MIDI_SYSEX_BUFFER] = {0}; + +void sysex_callback(MidiDevice * device, uint16_t start, uint8_t length, uint8_t * data) { + #ifdef API_SYSEX_ENABLE + // SEND_STRING("\n"); + // send_word(start); + // SEND_STRING(": "); + for (uint8_t place = 0; place < length; place++) { + // send_byte(*data); + midi_buffer[start + place] = *data; + if (*data == 0xF7) { + // SEND_STRING("\nRD: "); + // for (uint8_t i = 0; i < start + place + 1; i++){ + // send_byte(midi_buffer[i]); + // SEND_STRING(" "); + // } + uint8_t * decoded = malloc(sizeof(uint8_t) * (sysex_decoded_length(start + place - 4))); + uint16_t decode_length = sysex_decode(decoded, midi_buffer + 4, start + place - 4); + process_api(decode_length, decoded); + } + // SEND_STRING(" "); + data++; + } + #endif } + + #endif diff --git a/tmk_core/protocol/lufa/lufa.h b/tmk_core/protocol/lufa/lufa.h index aad08d640..b11854101 100644 --- a/tmk_core/protocol/lufa/lufa.h +++ b/tmk_core/protocol/lufa/lufa.h @@ -68,8 +68,17 @@ typedef struct { } __attribute__ ((packed)) report_extra_t; #ifdef MIDI_ENABLE -void MIDI_Task(void); -MidiDevice midi_device; + void MIDI_Task(void); + MidiDevice midi_device; + #define MIDI_SYSEX_BUFFER 32 +#endif + +#ifdef API_ENABLE + #include "api.h" +#endif + +#ifdef API_SYSEX_ENABLE + #include "api_sysex.h" #endif // #if LUFA_VERSION_INTEGER < 0x120730 diff --git a/tmk_core/protocol/midi.mk b/tmk_core/protocol/midi.mk index c85ae42ff..4855b23d3 100644 --- a/tmk_core/protocol/midi.mk +++ b/tmk_core/protocol/midi.mk @@ -4,6 +4,7 @@ SRC += midi.c \ midi_device.c \ bytequeue/bytequeue.c \ bytequeue/interrupt_setting.c \ + sysex_tools.c \ $(LUFA_SRC_USBCLASS) VPATH += $(TMK_PATH)/$(MIDI_DIR) \ No newline at end of file