master
3 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
James Young
|
a03aa301de
|
Remove Full Bootmagic (#13846)
* disambiguate Bootmagic rules in keymaps
The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic.
This commit edits the files to specify that full Bootmagic is intended.
* remove BOOTMAGIC_ENABLE=full setting
* unify commented BOOTMAGIC_ENABLE rules in keyboards
Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} +
```
* remove commented Bootmagic rules from keymap/user level
Command:
```
find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} +
```
* update keyboard BOOTMAGIC_ENABLE rule formatting
Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later).
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
```
* update keyboards' BOOTMAGIC_ENABLE settings
Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' +
```
* update keymap/user BOOTMAGIC_ENABLE settings
Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
```
* remove and replace inline comments in keyboards and keymap/user files
Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' +
```
* rename improperly named makefiles
Some files intended to be used as makefiles had improper names causing them to not be used as intended when building.
This commit corrects the filenames of the affected files.
* update renamed file with new rule formatting
* update QMK's template files
Updates QMK's `rules.mk` templates to use the new inline comment.
* update QMK Docs
- remove documentation of full Bootmagic
- update links to Bootmagic Lite doc
- add doc for Magic Keycodes
* rules.mk patch for coarse/ixora and coarse/vinta
|
||
CMMS-Freather
|
4c4b4b6e0d
|
[Keyboard] add sam's sg81m keyboard (#11624)
* new repo: create cmm.studio folder, add saka qmk firmware new folder for cmm.studio line up keyboard added saka68 keyboard qmk and via firmware support * Update keyboards/cmm.studio/saka68/config.h Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/cmm.studio/saka68/rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/cmm.studio/saka68/keymaps/via/rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/cmm.studio/saka68/config.h Co-authored-by: Ryan <fauxpark@gmail.com> * fix on keymap, readme fix on keymap, readme * Update keyboards/cmm.studio/saka68/readme.md Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/cmm.studio/saka68/keymaps/default/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * update vendor name with _ instead of . update vendor name with _ instead of . * Update readme.md change the make format * Update keyboards/cmm_studio/saka68/keymaps/default/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * deleted some files from cmm.studio, changes to cmm_studio deleted some files from cmm.studio, changes to cmm_studio * Update readme.md make command changed * Update keyboards/cmm_studio/saka68/readme.md Co-authored-by: Ryan <fauxpark@gmail.com> * Update readme.md added pic for pcb * Update readme.md * Update readme.md * Update readme.md * Update readme.md * Update readme.md * Update keyboards/cmm_studio/saka68/config.h tested and does work now. deleting these lines Co-authored-by: Ryan <fauxpark@gmail.com> * Update readme.md * Update readme.md * Update readme.md * Update readme.md * Update readme.md * Update readme.md * Update readme.md * Update keyboards/cmm_studio/saka68/readme.md Co-authored-by: Ryan <fauxpark@gmail.com> * Update readme.md added use physical reset button instruction * change to the cmm saka folder making the changes to cmm saka firmware seperated solder version firmware and hotswap version firmware * Update readme.md * Update readme.md * Update readme.md * Update readme.md * Update readme.md * Update readme.md * Update readme.md * Update readme.md * Update readme.md * Update readme.md * change to the cmm saka hotswap folder * add sam's sg81m keyboard add sam's sg81m keyboard firmware * Update keymap.c * Update keymap.c * update keymap update default keymap and via keymap * Update keymap.c * Update keymap.c * Update keymap.c * Update keyboards/sam/sg81m/sg81m.c Co-authored-by: Joel Challis <git@zvecr.com> * Update config.h * Update config.h Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Joel Challis <git@zvecr.com> |
||
|
CMMS-Freather
|
677789df77
|
change to cmm.studio saka68 folder. split to solder and hotswap, add hotswap fimware (#11443)
* new repo: create cmm.studio folder, add saka qmk firmware new folder for cmm.studio line up keyboard added saka68 keyboard qmk and via firmware support * Update keyboards/cmm.studio/saka68/config.h Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/cmm.studio/saka68/rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/cmm.studio/saka68/keymaps/via/rules.mk Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/cmm.studio/saka68/config.h Co-authored-by: Ryan <fauxpark@gmail.com> * fix on keymap, readme fix on keymap, readme * Update keyboards/cmm.studio/saka68/readme.md Co-authored-by: Ryan <fauxpark@gmail.com> * Update keyboards/cmm.studio/saka68/keymaps/default/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * update vendor name with _ instead of . update vendor name with _ instead of . * Update readme.md change the make format * Update keyboards/cmm_studio/saka68/keymaps/default/keymap.c Co-authored-by: Ryan <fauxpark@gmail.com> * deleted some files from cmm.studio, changes to cmm_studio deleted some files from cmm.studio, changes to cmm_studio * Update readme.md make command changed * Update keyboards/cmm_studio/saka68/readme.md Co-authored-by: Ryan <fauxpark@gmail.com> * Update readme.md added pic for pcb * Update readme.md * Update readme.md * Update readme.md * Update readme.md * Update readme.md * Update keyboards/cmm_studio/saka68/config.h tested and does work now. deleting these lines Co-authored-by: Ryan <fauxpark@gmail.com> * Update readme.md * Update readme.md * Update readme.md * Update readme.md * Update readme.md * Update readme.md * Update readme.md * Update keyboards/cmm_studio/saka68/readme.md Co-authored-by: Ryan <fauxpark@gmail.com> * Update readme.md added use physical reset button instruction * change to the cmm saka folder making the changes to cmm saka firmware seperated solder version firmware and hotswap version firmware * Update readme.md * Update readme.md * Update readme.md * Update readme.md * Update readme.md * Update readme.md * Update readme.md * Update readme.md * Update readme.md * Update readme.md * change to the cmm saka hotswap folder Co-authored-by: Ryan <fauxpark@gmail.com> |