Commit Graph

20 Commits

Author SHA1 Message Date
Zach White
0713797c58
Ensure that safe_commands always run ()
* ensure that safe_commands always run

* import the config subcommand in bin/qmk
2021-06-14 16:51:58 -07:00
James Young
1646c0f26c
2021 May 29 Breaking Changes Update ()
* Add Per Key functionality for AutoShift ()

* LED Matrix: Reactive effect buffers & advanced indicators ()

* [Keyboard] kint36: switch to sym_eager_pk debouncing ()

* [Keyboard] kint2pp: reduce input latency by ≈10ms ()

* LED Matrix: Split ()

* [CI] Format code according to conventions ()

* feat: infinite timeout for leader key ()

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions ()

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx ()

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) ()

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. ()

* Add support for MCU = STM32F446 ()

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions ()

* Format code according to conventions ()

* Add STM32L433 and L443 support ()

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h ()

* Fix bad PR merge for . ()

* Change RGB/LED Matrix to use a simple define for USB suspend ()

* [CI] Format code according to conventions ()

* Fixing transport's led/rgb matrix suspend state logic ()

* [CI] Format code according to conventions ()

* Fix comment parsing ()

* Added OLED fade out support ()

* fix some references to bin/qmk that slipped in ()

* Resolve a number of warnings in `qmk generate-api` ()

* New command: qmk console ()

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules ()

* Make Swap Hands use PROGMEM ()

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference ()

* [Keymap] Turn OLED off on suspend in soundmonster keymap ()

* Fixup build errors on `develop` branch. ()

* LED Matrix: Effects! ()

* Fix syntax error when compiling for ARM ()

* Remove KEYMAP and LAYOUT_kc ()

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules ()

* Rename `point_t` -> `led_point_t` ()

* [Keyboard] updated a vendor name / fixed minor keymap issues ()

* Add missing LED Matrix suspend code to suspend.c ()

* LED Matrix: Documentation ()

* Deprecate `send_unicode_hex_string()` ()

* Fix spelling mistake regarding LED Matrix in split_common. ()

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap ()

* Use milc.subcommand.config instead of qmk.cli.config ()

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer ()

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. ()

* matrix: wait for row signal to go HIGH for every row ()

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases ()

* Add support for up to 4 IS31FL3733 drivers ()

* Convert Encoder callbacks to be boolean functions ()

* [Keyboard] Fix Terrazzo build failure ()

* Do not hard set config in CPTC files ()

* [Keyboard] Corne - Remove legacy revision support ()

* [Keymap] Update to Drashna keymap and user code (based on develop) ()

* Add Full-duplex serial driver for ARM boards ()

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS ()

* Backlight: add defines for default level and breathing state ()

* Add dire message about LUFA mass storage bootloader ()

* [Keyboard] Remove redundant legacy and common headers for crkbd ()

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes ()

* `backlight.c`: include `eeprom.h` ()

* Add changelog for 2021-05-29 Breaking Changes merge ()

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only
2021-05-29 14:38:50 -07:00
Zach White
bc38c38f8c
Move the module checking and updating to lib/python ()
* move the module checking and updating to lib/python

* make flake8 happy

* Update lib/python/qmk/cli/__init__.py

Co-authored-by: Erovia <Erovia@users.noreply.github.com>

* prompt the user to disable developer mode

* pyformat

* flake8

Co-authored-by: Erovia <Erovia@users.noreply.github.com>
2021-05-10 12:00:52 -07:00
Zach White
ef6329af7c
Create a system to map between info.json and config.h/rules.mk ()
* generate rules.mk from a json mapping

* generate rules.mk from a json mapping

* support for config.h from json maps

* improve the mapping system

* document the mapping system

* move data/maps to data/mappings

* fix flake8 errors

* fixup LED_MATRIX_DRIVER

* remove product and description from the vision_division keymap level

* reduce the complexity of generate-rules-mk

* add tests for the generate commands

* fix qmk doctor when submodules are not clean
2021-01-31 12:46:00 -08:00
skullydazed
66d94dc22a
Move everything to Python 3.6 () 2020-04-18 22:00:56 +02:00
Erovia
8fe5c718b4 Fix edge-case with config
Without this check, users can lock themselves out by enabling developer
mode, than disabling the dependencies. They wouldn't be able to turn off
developer mode as none of the subcommands (including 'config') would
work.
2020-04-08 09:31:14 -07:00
Erovia
eb683c8c52 Apply @skullydazed's suggestions, move 'import milc'
Only 'import milc' after we are sure that the minimum required modules
are available, as it depends on a few of them.
2020-04-08 09:31:14 -07:00
Erovia
5cfc3ce02e Rebase on master, hide some other subcommands
The list of hidden subcommands were approved by @skullydazed ;)
Currently hidden if 'user.developer' is not True:

  - cformat
  - docs
  - kle2json
  - pyformat
  - pytest
2020-04-08 09:31:14 -07:00
Erovia
724f20ed32 Use milc for config check, requirements fixes
Use milc's config finding and parsing to check if the user is a
developer or not.
'requirements-dev.txt' will now load 'requirements.txt', so no need to
run pip twice.
Add missing 'yapf' dependency to 'requirements-dev.txt'.
2020-04-08 09:31:14 -07:00
Erovia
c61f016fa4 CLI: Add development mode support
Hide development specific options and don't require dev modules unless
`user.developer` is set to `True`.
2020-04-08 09:31:14 -07:00
Erovia
c89c084146
CLI: More MSYS2 fixes ()
* CLI: More MSYS2 fixes

Now I can fully setup and work with qmk_firmware on an MSYS2
installation without any errors or exceptions.

* Apply suggestions from code review

Co-Authored-By: skullydazed <skullydazed@users.noreply.github.com>

* Some improvements

* Remove unnecessary import

* Remove slow, unused code

Getting the version from GIT was slow on both Windows and Docker.
Until we find a better, faster way, this is removed.

* remove unused imports

* Implement @vomindoraan's suggestions

* refine how we pick the shell to use

* Apply @fauxpark's suggestions

fauxpark investigated the topic of shells in MSYS2 a bit and we come to the conclusion that the safest bet was to just use the user's shell.
Anything more just opens up more edge-cases than it solves.

Co-Authored-By: Ryan <fauxpark@gmail.com>

* Use `platform_id` in doctor

This will bring it in line with the new code.

Co-authored-by: skullydazed <skullydazed@users.noreply.github.com>
Co-authored-by: skullY <skullydazed@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
2020-03-29 14:29:44 +02:00
skullY
0ed492978a Add pep8-naming to our python linting 2019-12-01 13:40:14 -08:00
skullydazed
f7bdc54c69
Add flake8 to our test suite and fix all errors ()
* Add flake8 to our test suite and fix all errors

* Add some documentation
2019-11-20 14:54:18 -08:00
fauxpark
74252e03cf Fix "could not find module" error message formatting () 2019-10-30 22:50:45 -07:00
skullydazed
d569f08771
Configuration system for CLI ()
* Rework how bin/qmk handles subcommands

* qmk config wip

* Code to show all configs

* Fully working `qmk config` command

* Mark some CLI arguments so they don't pollute the config file

* Fleshed out config support, nicer subcommand support

* sync with installable cli

* pyformat

* Add a test for subcommand_modules

* Documentation for the `qmk config` command

* split config_token on space so qmk config is more predictable

* Rework how subcommands are imported

* Document `arg_only`

* Document deleting from CLI

* Document how multiple operations work

* Add cli config to the doc index

* Add tests for the cli commands

* Make running the tests more reliable

* Be more selective about building all default keymaps

* Update new-keymap to fit the new subcommand style

* Add documentation about writing CLI scripts

* Document new-keyboard

* Update docs/cli_configuration.md

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update docs/cli_development.md

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update docs/cli_development.md

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update docs/cli_development.md

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Address yan's comments.

* Apply suggestions from code review

suggestions from @noahfrederick

Co-Authored-By: Noah Frederick <code@noahfrederick.com>

* Apply suggestions from code review

Co-Authored-By: Noah Frederick <code@noahfrederick.com>

* Remove pip3 from the test runner
2019-09-22 13:25:33 -07:00
skullY
5b7a5b2a76 Setup a python test framework 2019-09-07 07:58:41 -07:00
fauxpark
c27aa60c50 Make the CLI Ψ capital () 2019-08-30 10:23:36 -07:00
skullydazed
f22c5c17b6
Refactor qmk compile-json to qmk compile () 2019-08-25 11:58:24 -07:00
skullydazed
3cb28bbe42
Use the older universal_newlines name instead of text () 2019-08-07 12:00:46 -07:00
skullydazed
a25dd58bc5
QMK CLI and JSON keymap support ()
* Script to generate keymap.c from JSON file.

* Support for keymap.json

* Add a warning about the keymap.c getting overwritten.

* Fix keymap generating

* Install the python deps

* Flesh out more of the python environment

* Remove defunct json2keymap

* Style everything with yapf

* Polish up python support

* Hide json keymap.c into the .build dir

* Polish up qmk-compile-json

* Make milc work with positional arguments

* Fix a couple small things

* Fix some errors and make the CLI more understandable

* Make the qmk wrapper more robust

* Add basic QMK Doctor

* Clean up docstrings and flesh them out as needed

* remove unused compile_firmware() function
2019-07-15 12:14:27 -07:00