Commit Graph

53 Commits

Author SHA1 Message Date
Purdea Andrei
ed0451bc28
Make atmel-dfu and chibios-dfu flashing behave more like caterina flashing. ()
This commit makes atmel-dfu and chibios-dfu bootloaders retry to detect the bootloader
every 0,5 seconds (now configurable via the BOOTLOADER_RETRY_TIME makefile variable),
and a period is printed after every try. This is a much more pleasant behaviour than
the 5s retry timeout.
2021-06-16 14:20:44 +10:00
James Young
1646c0f26c
2021 May 29 Breaking Changes Update ()
* Add Per Key functionality for AutoShift ()

* LED Matrix: Reactive effect buffers & advanced indicators ()

* [Keyboard] kint36: switch to sym_eager_pk debouncing ()

* [Keyboard] kint2pp: reduce input latency by ≈10ms ()

* LED Matrix: Split ()

* [CI] Format code according to conventions ()

* feat: infinite timeout for leader key ()

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions ()

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx ()

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) ()

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. ()

* Add support for MCU = STM32F446 ()

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions ()

* Format code according to conventions ()

* Add STM32L433 and L443 support ()

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h ()

* Fix bad PR merge for . ()

* Change RGB/LED Matrix to use a simple define for USB suspend ()

* [CI] Format code according to conventions ()

* Fixing transport's led/rgb matrix suspend state logic ()

* [CI] Format code according to conventions ()

* Fix comment parsing ()

* Added OLED fade out support ()

* fix some references to bin/qmk that slipped in ()

* Resolve a number of warnings in `qmk generate-api` ()

* New command: qmk console ()

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules ()

* Make Swap Hands use PROGMEM ()

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference ()

* [Keymap] Turn OLED off on suspend in soundmonster keymap ()

* Fixup build errors on `develop` branch. ()

* LED Matrix: Effects! ()

* Fix syntax error when compiling for ARM ()

* Remove KEYMAP and LAYOUT_kc ()

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules ()

* Rename `point_t` -> `led_point_t` ()

* [Keyboard] updated a vendor name / fixed minor keymap issues ()

* Add missing LED Matrix suspend code to suspend.c ()

* LED Matrix: Documentation ()

* Deprecate `send_unicode_hex_string()` ()

* Fix spelling mistake regarding LED Matrix in split_common. ()

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap ()

* Use milc.subcommand.config instead of qmk.cli.config ()

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer ()

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. ()

* matrix: wait for row signal to go HIGH for every row ()

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases ()

* Add support for up to 4 IS31FL3733 drivers ()

* Convert Encoder callbacks to be boolean functions ()

* [Keyboard] Fix Terrazzo build failure ()

* Do not hard set config in CPTC files ()

* [Keyboard] Corne - Remove legacy revision support ()

* [Keymap] Update to Drashna keymap and user code (based on develop) ()

* Add Full-duplex serial driver for ARM boards ()

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS ()

* Backlight: add defines for default level and breathing state ()

* Add dire message about LUFA mass storage bootloader ()

* [Keyboard] Remove redundant legacy and common headers for crkbd ()

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes ()

* `backlight.c`: include `eeprom.h` ()

* Add changelog for 2021-05-29 Breaking Changes merge ()

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only
2021-05-29 14:38:50 -07:00
Joel Challis
14c2f671cb
Switch to nano specs on ChibiOS builds - Round 2 () 2021-01-20 10:27:21 +11:00
QMK Bot
d6d15b91f3 Merge remote-tracking branch 'origin/master' into develop 2021-01-17 17:46:01 +00:00
Nick Brassel
e524e0a397
Add syscall fallbacks to ChibiOS builds ()
* Add fallback syscalls to ChibiOS builds that are present but able to be overridden as appropriate.

* Modified location to be ChibiOS-specific.
2021-01-18 04:45:21 +11:00
QMK Bot
b02c694992 Merge remote-tracking branch 'origin/master' into develop 2020-12-23 00:45:29 +00:00
Reza Jelveh
fd177582ad
chibios: honor PLATFORMASM in chibios build () 2020-12-23 11:44:49 +11:00
Nick Brassel
87291437bd
Add board specific to Proton-C, with usual defaults turned on. ()
- Set all other ChibiOS defaults to 'off', when not targeting Proton-C
- Modified all existing F303 boards to point at the QMK_PROTON_C to ensure repeatable binary output
- Modified version.h generation so that SKIP_VERSION=yes generates the same output
2020-12-03 13:04:28 +11:00
James Young
c66df16644
2020 November 28 Breaking Changes Update ()
* Branch point for 2020 November 28 Breaking Change                                                

* Remove matrix_col_t to allow MATRIX_ROWS > 32 ()                                           

* Add support for soft serial to ATmega32U2 ()                                               

* Change MIDI velocity implementation to allow direct control of velocity value ()            

* Add ability to build a subset of all keyboards based on platform.                                

* Actually use eeprom_driver_init().                                                               

* Make bootloader_jump weak for ChibiOS. ()                                                  

* Joystick 16-bit support ()                                                                 

* Per-encoder resolutions ()                                                                 

* Share button state from mousekey to pointing_device ()                                     

* Add hotfix for chibios keyboards not wake ()                                               

* Add advanced/efficient RGB Matrix Indicators ()                                             

* Naming change.                                                                                   

* Support for STM32 GPIOF,G,H,I,J,K ()                                                       

* Add milc as a dependency and remove the installed milc ()                                  

* ChibiOS upgrade: early init conversions ()                                                 

* ChibiOS upgrade: configuration file migrator ()                                             

* Haptic and solenoid cleanup ()                                                              

* XD75 cleanup ()                                                                            

* OLED display update interval support ()                                                    

* Add definition based on currently-selected serial driver. ()                               

* New feature: Retro Tapping per key ()                                                      

* Allow for modification of output RGB values when using rgblight/rgb_matrix. ()             

* Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. ()

* Rescale both ChibiOS and AVR backlighting.                                                       

* Reduce Helix keyboard build variation ()                                                    

* Minor change to behavior allowing display updates to continue between task ticks ()        

* Some GPIO manipulations in matrix.c change to atomic. ()                                   

* qmk cformat ()                                                                             

* [Keyboard] Update the Speedo firmware for v3.0 ()                                          

* Maartenwut/Maarten namechange to evyd13/Evy ()                                             

* [quantum] combine repeated lines of code ()                                                

* Add step sequencer feature ()                                                               

* aeboards/ext65 refactor ()                                                                 

* Refactor xelus/dawn60 for Rev2 later ()                                                    

* add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk ()                                 

* [Core] Added `add_oneshot_mods` & `del_oneshot_mods` ()                                    

* update chibios os usb for the otg driver ()                                                 

* Remove HD44780 References, Part 4 ()                                                       

* [Keyboard] Add Valor FRL TKL (+refactor) ()                                                

* Fix cursor position bug in oled_write_raw functions ()                                     

* Fixup version.h writing when using SKIP_VERSION=yes ()                                     

* Allow for certain code in the codebase assuming length of string. ()                       

* Add AT90USB support for serial.c ()                                                        

* Auto shift: support repeats and early registration ()                                       

* Rename ledmatrix.h to match .c file ()                                                      

* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER ()                                        

* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER ()                                        

* Merge point for 2020 Nov 28 Breaking Change
2020-11-28 12:02:18 -08:00
Ryan
b89b2030af Kiibohd bootloader, take 2 () 2020-08-29 14:30:02 -07:00
Sergey Vlasov
d00ac5dfb6 Add st-flash flash target ()
* Add `st-flash` flash target

Add support for flashing the firmware via the `st-flash` utility from
the STLink Tools package (https://github.com/stlink-org/stlink).

* Add `st-flash` to the `qmk flash -b` output
2020-08-29 14:30:02 -07:00
Nick Brassel
385d49cc39 Initial work for consolidation of ChibiOS platform files ()
* Initial work for consolidation of board files and default ChibiOS configs.

* Migrate F401/F411 black pills for testing.

* Add early init bootloader jump flag.

* Add support for I2C in order to use i2c_scanner keymap.

* Add F401/F411 HSE bypass to get things booting.

* Exempt "hooked" ChibiOS conf files from updater script.

* Fix up ordering for bootloader_defs file check.

* Match previous $(KEYBOARD_PATHS) value for Proton-C, updated for all board configs.
2020-08-29 14:30:02 -07:00
Nick Brassel
70ce4ba56f
Revert "Add Kiibohd bootloader type to bootloader.mk ()" ()
This reverts commit e2d4cd1a41.
2020-08-21 15:42:28 -07:00
Ryan
e2d4cd1a41
Add Kiibohd bootloader type to bootloader.mk () 2020-08-12 12:28:20 +10:00
Joel Challis
b0c780ed32
Fix ChibiOS FPU build logic () 2020-05-20 16:28:39 +01:00
Joel Challis
adda5d7770
Revert "Use nano specs ()" ()
This reverts commit c775104b9f.
2020-05-08 14:51:00 +01:00
Joel Challis
b6a09502c6
Migrate :program logic to :flash () 2020-04-01 13:27:16 +01:00
Joel Challis
d8f3c28a37
Align some ChibiOS build logic ()
* Align some ChibiOS build logic

* infer more makefile logic

* Move bootloader logic to chibios file
2020-03-22 20:48:17 +11:00
Joel Challis
d96380e654
Initial arm->chibios pass - simplify some platform logic () 2020-03-21 16:20:04 +11:00
Joel Challis
e34764502f
Remove qmk archive generation () 2020-03-17 21:28:13 +00:00
Nick Brassel
d0c3acbe3e
Allow for ChibiOS 20.x (master), as well as enabling ChibiOS-Contrib HAL. () 2020-03-01 11:50:49 +11:00
Joel Challis
c775104b9f
Use nano specs () 2020-03-01 11:49:16 +11:00
Joel Challis
8d9c800da0
Unconditionally enable ChibiOS syscalls ()
* Enable syscalls all the time

* fix whitespace
2020-03-01 09:45:21 +11:00
James Young
26eef35f07
2020 February 29 Breaking Changes Update () 2020-02-29 11:59:30 -08:00
Nick Brassel
b28ee6b039 Fix misunderstanding of CPPFLAGS and CXXFLAGS. 2020-01-31 15:29:23 +11:00
Joel Challis
50855593ff
Migrate common ld scripts to common location ()
* Migrate common ld scripts to common location

* Remove duplicate ld scripts

* Update build to look at common ld location
2020-01-27 22:38:55 +00:00
Joel Challis
17794e0b25
ARM split - Add support for dfu-util EE_HANDS flashing ()
* Initial stab at some fake dfu-util-split-left behaviour

* Apply suggestions from code review

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Clang format fixes

* Fake eeprom init for both left and right hand
2019-09-27 21:33:55 +01:00
Drashna Jaelre
02f77e7215 Actually use correct bootloader not found message () 2019-09-08 09:55:18 +10:00
Drashna Jaelre
44fd317a87 Move Bootloader not found message to global variable ()
* Move Bootloader not found message to global variable

* Apply suggestions from code review

Co-Authored-By: fauxpark <fauxpark@gmail.com>
2019-09-08 02:06:39 +10:00
Joel Challis
ae44ec9820 Align flashing behaviour of dfu-util ()
* Align flashing retry logic of dfu-util

* Align bootloader wait messages

Co-Authored-By: Drashna Jaelre <drashna@live.com>
2019-08-22 16:08:45 -07:00
Drashna Jaelre
4003d077ce Add a universal flash command for cli ()
* Add universal flash command

* Add bootloader info to I:C boards

* Add support for ATSAM

* Add messages for flash target

* Message cleanup

* Add USB ASP Flashing target

* Make usbasp target more universal

* Add phoney target for usbasp

* Clarify error message when bootloader isn't matched
2019-08-20 15:39:24 -07:00
skullydazed
7579518613 Fix chibios so the dfu-suffix is only applied once. () 2019-07-07 09:08:49 -07:00
zvecr
2f7a57a6de Copy avr teensy flash logic to arm () 2019-05-30 16:53:49 -07:00
Drashna Jaelre
41beecfc18 Add DFU Suffix for ARM boards ()
* Add DFU Suffix for ARM boards

* Blindly flash DFU SUFFIX ARGS for now

* Fix commented out check

* Fix DFU Suffix Argument check

Thank you jack!

* Update Travis CI Scripts to include dfu-util

So we can get dfu-suffix as well

* Manually add dfu-suffix package

* Use external repo for newer version of dfu-util

One that includes dfu-suffix

* Update .travis.yml

* Silence unnecessary output from dfu-suffix
2019-05-03 08:24:22 -07:00
Shihpin Tseng
68fad7b777 Enable custom chibios sub-platform 2019-02-14 21:06:26 -08:00
Drashna Jaelre
f16b5cc92b Add delayed flashing option for DFU Util ()
* Add delayed flashing option for DFU Util

* Use a loop to make code cleaner

* Make delay configurable but default to 10

* Better formatting of check
2018-10-27 00:21:43 -04:00
Takuya Urakawa
e2dee054d0 add st-link_cli flashing ()
* add st-link_cli support

* format names
2018-09-28 21:30:44 -04:00
Jack Humbert
ade22f8e2c
Adds support for Planck Rev 6 ()
* initial files for rev 6 with encoder

* music map init, dip scan added

* adds ws2812 driver for arm

* flesh out dip and encoder support

* adds default encoder res

* adds default encoder res

* start muse implementation

* muse working with encoder as control

* flip direction

* try mouse wheel again

* dont break other revs

* dont break other revs

* conditional autio

* pwm ws driver (not working)

* update build includes for chibios

* update ws2812 driver/config

* last commit for glasser code

* working example

* remove rgb for now

* finish up rev6

* working encoder keycodes

* add warnings to planck keymaps about the LAYOUT
2018-07-16 11:48:31 -04:00
Kaleb Elwert
f6b3c67678 Update whitefox to use the K-Type teensy workaround 2018-04-03 23:06:14 -04:00
fredizzimo
53ff8a31b6 Merge ChibiOS and LUFA descriptor support ()
* Move lufa descriptor to protocol/usb_descriptor

* Try to compile usb_descriptor on ChibiOS

* Add lufa_utils for ChibiOS

Lufa USB descriptors for ChibiOS

* More lufa_util compatibility fixes

* First compiling version of shared USB descriptor

* Send the usb descriptors

* Fix the CONSOLE output on ChibiOS

* Add errors for unsupported interfaces

* Enable support for vitual serial port USB descriptors

* Implement virtual serial port for ChibiOS

* Cleanup the lufa_utils

Use the default lufa header files

* Add raw hid support for ChibiOS

This is completely untested

* Enable midi compilation on ChibiOS

* Move midi functionality out of lufa.c

* Don't register sysex callback when not needed

* ChibiOS compilation fixes

* Update ChibiOS submodule

* Fix the Midi USB descriptor

It didn't work properly when both Midi and Virtual serial port was enabled.

* Add MIDI support for ChibiOS

* Fix USB descriptor strings on ChibiOS

* Use serial usb driver for raw hid

* Generalize the ChibiOS stream like drivers

This makes the initialization much more simple and eliminates a lot of
the code duplication.

* Convert console output to chibios stream driver

* Fixes for ChibiOS update

* Update the ChibiOS contrib submodule

To include the usb data toggle synchronization fixes

* Fix duplicate reset enumeration on ChibiOS

* Add missing include

* Add number of endpoints check for ChibiOS

* Enable serial USB driver on all keyboards

* Add missing includes when API is enabled withot midi

* Add another missing inlcude
2018-02-08 15:07:46 -05:00
Jack Humbert
63c16f4b63
ARM audio fixes, stack size increase ()
* fix up arm audio implementation

* chibios stack size inc

* get one channel working

* update for chibios
2018-02-08 14:39:40 -05:00
skullydazed
9bfaf66792
Always copy the firmware file to the root qmk_firmware directory ()
* Always copy the firmware file to the root qmk_firmware directory

* remove circular dependency
2018-01-28 11:11:28 -08:00
Fred Sundvik
510a8d3339 Fix compiler settings for MCUs with floating point 2018-01-21 01:10:16 -08:00
Jack Humbert
fe56fffe7d
Adds .qmk file type as a target for QMK Toolbox ()
* adds .qmk file type as a target

* adds info.json with vendor and product

* add files for qmk info script

* add layout file for planck

* ignore .qmk files

* more settings

* update rules for avr and chibios

* update .qmk generation for info.json and inheritence
2017-11-01 20:01:45 -04:00
Jack Humbert
800ec55dfc Make arguments redo, subproject elimination ()
* redo make args to use colons, better folder structuring system [skip ci]

* don't put spaces after statements - hard lessons in makefile development

* fix-up some other rules.mk

* give travis a chance

* reset KEYMAPS variable

* start converting keyboards to new system

* try making all with travis

* redo make args to use colons, better folder structuring system [skip ci]

* don't put spaces after statements - hard lessons in makefile development

* fix-up some other rules.mk

* give travis a chance

* reset KEYMAPS variable

* start converting keyboards to new system

* try making all with travis

* start to update readmes and keyboards

* look in keyboard directories for board.mk

* update visualizer rules

* fix up some other keyboards/keymaps

* fix arm board ld includes

* fix board rules

* fix up remaining keyboards

* reset layout variable

* reset keyboard_layouts

* fix remainging keymaps/boards

* update readmes, docs

* add note to makefile error

* update readmes

* remove planck keymap warnings

* update references and docs

* test out tarvis build stages

* don't use stages for now

* don't use stages for now
2017-10-14 11:32:19 -10:00
skullydazed
5fd68266f5 Clueboard 60% support ()
* initial clueboard_60 support

* LED lighting support

* fix the clueboard->clueboard_66 rename

* Add layout support to clueboard_60

* Fix the 60_iso layout so it's actually iso

* add a default keymap for AEK layout

* fix clueboard_17

* Fixup the ISO layouts

* Fix the `wait_ms()/wait_us()` definitions for chibios

* Fix up the wait_ms/wait_us hack. Reduce stack size.

* Add a missing #include "wait.h"

* commit files that should have already been comitted
2017-09-29 16:17:30 -07:00
Jack Humbert
677b89768b add bin targets - closes , fixes 2017-08-27 12:11:59 -04:00
Fred Sundvik
18b4d24cc3 Add possibility to override the command to execute when flashing 2017-04-29 23:45:27 +03:00
Trevor Joynson (trevorj)
515b4dd1f7 Allow to specify serial to dfu-util flash 2017-03-02 18:26:26 -08:00
Fred Sundvik
3442e216dc Move bootloader_defs include to build_keyboard
Also fix it for subprojects
2016-08-20 03:56:42 +03:00