Commit Graph

227 Commits

Author SHA1 Message Date
QMK Bot
40bf61118e Merge remote-tracking branch 'origin/master' into develop 2021-06-20 16:38:52 +00:00
Ryan
90e57b7b0a
OLED font easter egg (#13269) 2021-06-20 09:38:21 -07:00
Roland Huber
e4c5b1bbbb
Add Per Key exclusions for Haptic Feedback (#12386)
Co-authored-by: Drashna Jaelre <drashna@live.com>
2021-06-19 19:28:54 -07:00
Ryan
37fba09021
ST7565 invert (#13237) 2021-06-19 18:51:35 +10:00
Ignaz Kevenaar
0311c8036d
Add oled_invert (#13172)
Co-authored-by: Drashna Jaelre <drashna@live.com>
2021-06-19 01:08:22 +10:00
Nick Brassel
172e6a7030
Extensible split data sync (#11930)
* Extensible split data sync capability through transactions.

- Split common transport has been split up between the transport layer
  and data layer.
- Split "transactions" model used, with convergence between I2C and
  serial data definitions.
- Slave matrix "generation count" is used to determine if the full slave
  matrix needs to be retrieved.
- Encoders get the same "generation count" treatment.
- All other blocks of data are synchronised when a change is detected.
- All transmissions have a globally-configurable deadline before a
  transmission is forced (`FORCED_SYNC_THROTTLE_MS`, default 100ms).
- Added atomicity for all core-synced data, preventing partial updates
- Added retries to AVR i2c_master's i2c_start, to minimise the number of
  failed transactions when interrupts are disabled on the slave due to
  atomicity checks.
- Some keyboards have had slight modifications made in order to ensure
  that they still build due to firmware size restrictions.

* Fixup LED_MATRIX compile.

* Parameterise ERROR_DISCONNECT_COUNT.
2021-06-18 09:10:06 +10:00
fauxpark
d04f7bc160 Merge remote-tracking branch 'upstream/master' into develop 2021-06-17 17:22:01 +10:00
Ryan
2f08a34394
OLED driver tweaks (#13215) 2021-06-17 17:14:23 +10:00
Jonathan Rascher
83ee79565c
Fix overrun in oled_write_raw when not at (0, 0) (#13204) 2021-06-15 22:30:37 -07:00
Jonathan Rascher
d59f8d1c02
Fix overrun in st7565_write_raw when not at (0, 0) (#13209) 2021-06-15 22:30:27 -07:00
Ryan
b2fdd48744
Add ST7565 LCD driver (#13089)
Co-authored-by: Joakim Tufvegren <jocke@barbanet.com>
2021-06-10 17:16:09 +10:00
Gigahawk
32b2ac0a80
GMMK Pro RGB Support (#13147)
* Enable SPI1 for GMMK pro

* Setup initial boilerplate for new LED driver

* RGB matrix minimally functional

* Map full LED matrix

* Return keymap to default

* Fix printscreen LED mapping

* Reduce max brightness

* Default values for AW20216

* Add documentation for AW20216

* Disable console and warnings

* Run cformat

* Update drivers/awinic/aw20216.h

Co-authored-by: Drashna Jaelre <drashna@live.com>

* make aw struct match issi struct

Co-authored-by: Drashna Jaelre <drashna@live.com>

* add led location defines

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Use led pin definitions in keyboard.c

* Add driver indices to led map

* Fix elif typo

* Run cformat

* Update docs

* Fix typo in docs

* Document global brightness limits

Co-authored-by: Drashna Jaelre <drashna@live.com>
2021-06-10 11:40:25 +10:00
Ryan
17d0fad762
spi_master Kinetis support (#13098) 2021-06-08 19:54:33 +10:00
Ryan
261d94ce34
Tidy up spi_master includes (#13053) 2021-06-03 16:26:41 +10:00
Nick Brassel
597d2e0e7b
Fix up WS2812 SPI driver on F072. (#13022) 2021-06-03 09:48:16 +10:00
James Young
1646c0f26c
2021 May 29 Breaking Changes Update (#13034)
* Add Per Key functionality for AutoShift (#11536)

* LED Matrix: Reactive effect buffers & advanced indicators (#12588)

* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)

* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)

* LED Matrix: Split (#12633)

* [CI] Format code according to conventions (#12650)

* feat: infinite timeout for leader key (#6580)

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions (#12680)

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)

* Add support for MCU = STM32F446 (#12619)

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions (#12682)

* Format code according to conventions (#12687)

* Add STM32L433 and L443 support (#12063)

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)

* Fix bad PR merge for #6580. (#12721)

* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)

* [CI] Format code according to conventions (#12731)

* Fixing transport's led/rgb matrix suspend state logic (#12770)

* [CI] Format code according to conventions (#12772)

* Fix comment parsing (#12750)

* Added OLED fade out support (#12086)

* fix some references to bin/qmk that slipped in (#12832)

* Resolve a number of warnings in `qmk generate-api` (#12833)

* New command: qmk console (#12828)

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules (#12846)

* Make Swap Hands use PROGMEM (#12284)

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference (#12856)

* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)

* Fixup build errors on `develop` branch. (#12723)

* LED Matrix: Effects! (#12651)

* Fix syntax error when compiling for ARM (#12866)

* Remove KEYMAP and LAYOUT_kc (#12160)

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)

* Rename `point_t` -> `led_point_t` (#12864)

* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)

* Add missing LED Matrix suspend code to suspend.c (#12878)

* LED Matrix: Documentation (#12685)

* Deprecate `send_unicode_hex_string()` (#12602)

* Fix spelling mistake regarding LED Matrix in split_common. (#12888)

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)

* Use milc.subcommand.config instead of qmk.cli.config (#12915)

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer (#12237)

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. (#12933)

* matrix: wait for row signal to go HIGH for every row (#12945)

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases (#12976)

* Add support for up to 4 IS31FL3733 drivers (#12342)

* Convert Encoder callbacks to be boolean functions (#12805)

* [Keyboard] Fix Terrazzo build failure (#12977)

* Do not hard set config in CPTC files (#11864)

* [Keyboard] Corne - Remove legacy revision support (#12226)

* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)

* Add Full-duplex serial driver for ARM boards (#9842)

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)

* Backlight: add defines for default level and breathing state (#12560)

* Add dire message about LUFA mass storage bootloader (#13014)

* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes (#12985)

* `backlight.c`: include `eeprom.h` (#13024)

* Add changelog for 2021-05-29 Breaking Changes merge (#12939)

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only
2021-05-29 14:38:50 -07:00
github-actions[bot]
6c5e94061c
[CI] Format code according to conventions (#12838)
Co-authored-by: QMK Bot <hello@qmk.fm>
2021-05-10 03:15:00 +10:00
Purdea Andrei
60a39f4f5d
haptic: correct size of reserved field in the haptic structure. This saves 1 byte of wasted SRAM. (#12483)
Co-authored-by: Drashna Jaelre <drashna@live.com>
2021-05-08 20:45:41 -07:00
Nick Brassel
a0089aa345
Fixup Satisfaction75 bootprocess. (#12621)
- Use normal ChibiOS I2C driver.
- Move drawing code to housekeeping -- previously it was during matrix
  scan, which gets executed during bootmagic checks. However, bootmagic
  is invoked before QWIIC subsystem is enabled, which means I2C isn't
  configured yet. All I2C calls to the OLED fail with timeouts while
  bootmagic is being checked. Housekeeping ensures this is executed once
  the system has initialised and settled.
- QWIIC OLED driver: properly clear out OLED buffer when clearing screen.
2021-04-19 13:08:01 +10:00
Joshua Diamond
0b63fb5e81 Merge branch 'master' into develop 2021-02-14 20:26:22 -05:00
Ryan
9ee1282019
LED Matrix: rename LED_DRIVER_LED_COUNT to DRIVER_LED_TOTAL (#11858) 2021-02-15 11:55:13 +11:00
github-actions[bot]
8e8b7113dc
Format code according to conventions (#11907)
Co-authored-by: QMK Bot <hello@qmk.fm>
2021-02-15 11:53:15 +11:00
Nick Brassel
f53e41ac81
Add support for analog USBPD on STM32G4xx. (#11824)
* Add support for analog USBPD on STM32G4xx.

* Split up to a list of driver types, allow for custom.
2021-02-15 08:56:13 +11:00
github-actions[bot]
c27a778281
Format code according to conventions (#11905)
Co-authored-by: QMK Bot <hello@qmk.fm>
2021-02-15 06:55:43 +11:00
QMK Bot
39ed48f7a7 Merge remote-tracking branch 'origin/master' into develop 2021-02-08 21:33:45 +00:00
Sergey Vlasov
627ceebef3
ws2812: Fix number of nops for AVR at 8 MHz (#9559)
* ws2812: Fix number of nops for AVR at 8 MHz

When trying to calculate the number of nops for AVR running at 8 MHz,
the value of `w3` is expected to be negative; however, because `F_CPU`
is defined in tmk_core/avr.mk with the `UL` suffix, the preprocessor
performs its calculations using `unsigned long`, getting a very large
positive number instead of the expected negative number; this then
results in generating code with a huge number of nops.  Fix the broken
calculations by performing a comparison before subtraction, so that the
unsigned number wraparound does not occur.

The keyboard which triggers the problem is `handwired/promethium`; the
buggy code silently compiles, but the resulting timings would be
completely wrong.

* ws2812: Clean up the code after the 8 MHz fix

Remove old code which was unsuccessfully trying to clamp negative w1, w2
and w3 values to 0, and set w1_nops, w2_nops and w3_nops directly.
2021-02-09 08:33:04 +11:00
Drashna Jaelre
6b9a7e21e9
Include stdbool.h in uart.h (#11728) 2021-01-30 18:35:16 +11:00
Dasky
d92ffd1157
Adds AT90USB162 support (#11570)
* at90usb162 support

* fix missing bracket

* Apply suggestions from code review

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Ryan <fauxpark@gmail.com>
2021-01-29 19:53:56 -08:00
Ryan
30b46fad57
UART driver refactor (#11637) 2021-01-27 17:42:49 +11:00
QMK Bot
296552e358 Merge remote-tracking branch 'origin/master' into develop 2021-01-15 21:43:07 +00:00
kb-elmo
3d70766327
Add BGR byte order for WS2812 drivers (#11562)
* add byte order bgr for ws2812

* update docs for driver change

* Update ws2812_driver.md

* Update docs/ws2812_driver.md

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Ryan <fauxpark@gmail.com>
2021-01-16 08:42:30 +11:00
Nick Brassel
34446b79d7
Split up QWIIC_ENABLE to use QWIIC_DRIVERS as well, with yes/no for enable flag. (#11426) 2021-01-04 08:45:43 +11:00
Nick Brassel
271c0cf136 Merge remote-tracking branch 'upstream/master' into develop 2021-01-03 15:26:43 +11:00
Ryan
f3ac792c09
Align ChibiOS spi_master behaviour with AVR (#11404)
* Align ChibiOS spi_master behaviour with AVR

* Rollback `spi_transmit()` and `spi_receive()` to preserve DMA
2021-01-03 14:53:53 +11:00
Aldehir Rojas
4f2f21dc05
Rewrite APA102 support (#10894)
* Rewrite APA102 support

The APA102 source was broken by commit 16a15c1cfc as it did not include the
quantum header. This commit addresses that, as well as other issues with
transferring bytes over the SPI interface, i.e. it was not setting the
clock pin back to low after sending a bit.

The deviation when sending the end frame is kept, but updated to the
latest from the referenced project.

Finally, these changes expose the global LED brightness parameter
of the APA102. Brightness values are configurable through
`APA102_DEFAULT_BRIGHTNESS` and `APA102_MAX_BRIGHTNESS`.

* Fix typo in led brightness extern

* Move driver out of AVR directory and add delay for ARM

* Experimental APA102 support on AVR and ARM

Co-authored-by: Alde Rojas <hello@alde.io>

* Refactor apa102_send_byte() calls to a loop

* Implement io_wait function for ARM

* Move APA102 drivers to own directory, fix copyright notice

* Add APA102 keymap to handwired/onekey

* Simplify RGBLIGHT_ENABLE/DRIVER option handling

Co-authored-by: Mikkel Jeppesen <2756925+Duckle29@users.noreply.github.com>
2020-12-30 00:28:49 +00:00
QMK Bot
99d6349978 Merge remote-tracking branch 'origin/master' into develop 2020-12-27 17:37:04 +00:00
Ryan
1b7b72c0e9
Ensure single newline at EOF for core files (#11310) 2020-12-28 04:36:32 +11:00
QMK Bot
0b37c0dfa0 Merge remote-tracking branch 'origin/master' into develop 2020-12-26 04:56:43 +00:00
Ryan
1d1d5da43f
Change include guards in tmk_core/ and drivers/ to pragma once (#11240) 2020-12-26 15:56:11 +11:00
QMK Bot
06f9297f94 Merge remote-tracking branch 'origin/master' into develop 2020-12-18 17:29:08 +00:00
Joel Challis
a9f7d4dccc
Various compilation fixes for avr-gcc 10 (#9269) 2020-12-18 17:28:29 +00:00
fauxpark
7797070b37 Merge remote-tracking branch 'upstream/master' into develop 2020-12-18 02:15:28 +11:00
Ryan
6ea4b06f9f
Run cformat and dos2unix manually (#11235) 2020-12-17 14:06:30 +00:00
QMK Bot
2e0f2025bd Merge remote-tracking branch 'origin/master' into develop 2020-12-16 03:27:52 +00:00
Ryan
9366ed7282
Normalise include statements in keyboard code (#11185) 2020-12-16 14:27:23 +11:00
QMK Bot
25a1cb5a15 Merge remote-tracking branch 'origin/master' into develop 2020-12-13 18:51:35 +00:00
Xelus22
70f40339c2
Add i2c 24LC64 eeprom (#11200)
* add 24LC64 eeprom

* docs update

* Update docs/eeprom_driver.md

Co-authored-by: Joel Challis <git@zvecr.com>

Co-authored-by: Joel Challis <git@zvecr.com>
2020-12-14 05:50:50 +11:00
QMK Bot
fdfcce57e1 Merge remote-tracking branch 'origin/master' into develop 2020-12-11 02:46:19 +00:00
Ryan
501f2fdef1
Normalise include statements in core code (#11153)
* Normalise include statements in core code

* Missed one
2020-12-11 13:45:24 +11:00
QMK Bot
7043561459 Merge remote-tracking branch 'origin/master' into develop 2020-12-06 06:18:31 +00:00