Commit Graph

3 Commits

Author SHA1 Message Date
James Young
a03aa301de
Remove Full Bootmagic ()
* disambiguate Bootmagic rules in keymaps

The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic.

This commit edits the files to specify that full Bootmagic is intended.

* remove BOOTMAGIC_ENABLE=full setting

* unify commented BOOTMAGIC_ENABLE rules in keyboards

Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no       # Virtual DIP switch configuration;g' {} +
```

* remove commented Bootmagic rules from keymap/user level

Command:

```
find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} +
```

* update keyboard BOOTMAGIC_ENABLE rule formatting

Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later).

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
```

* update keyboards' BOOTMAGIC_ENABLE settings

Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' +
```

* update keymap/user BOOTMAGIC_ENABLE settings

Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
```

* remove and replace inline comments in keyboards and keymap/user files

Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`.

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1     # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1      # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1       # Enable Bootmagic Lite;g' '{}' +
```

* rename improperly named makefiles

Some files intended to be used as makefiles had improper names causing them to not be used as intended when building.

This commit corrects the filenames of the affected files.

* update renamed file with new rule formatting

* update QMK's template files

Updates QMK's `rules.mk` templates to use the new inline comment.

* update QMK Docs

- remove documentation of full Bootmagic
- update links to Bootmagic Lite doc
- add doc for Magic Keycodes

* rules.mk patch for coarse/ixora and coarse/vinta
2021-08-06 23:59:56 -07:00
Ryan
9dcd03b6ca
Set BOOTLOADER = stm32-dfu for all applicable STM32 boards ()
* Set bootloader to stm32-dfu for STM32F303

* Set bootloader to stm32-dfu for STM32F0x2

* Set bootloader to stm32-dfu for STM32F4x1

* Set bootloader to stm32duino for sowbug

* Delete redundant bootloader_defs headers

* Add some missing MCU name comments

* Move APM32 dfu-suffix overrides underneath bootloader

* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
2021-06-08 19:48:46 +10:00
Álvaro A. Volpato
457042f179
Mode80 support ()
* Add default mode eighty firmware

* Add via keymap

* Mode80 firmware upgrades

- Removed SPI and PWM drivers from MCU configuration, HAL configuration and Chibi configuration as neither peripherals are being used
- Included second backspace key (row 5, col 14) which should solve the non-appearance of the backspace key on the hotswap PCB

* Add default mode eighty firmware

* Add via keymap

* Update keyboards/mode/eighty/config.h

Remove comment lines from config.h

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update keyboards/mode/eighty/config.h

Remove comments from config.h

Co-authored-by: Ryan <fauxpark@gmail.com>

* Update eighty.c

Add GPLv2 header

* Update eighty.h

Add GPLv2 license header

* Update readme.md

Update README

* Update keyboards/mode/eighty/config.h

Remove keyboard description

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Delete config.h

Delete config.h in keynap folder

* Update keyboards/mode/eighty/rules.mk

Remove feature disabling in rules.mk

Co-authored-by: Ryan <fauxpark@gmail.com>

* Move rules.mk to VIA folder

* Update keyboards/mode/eighty/keymaps/via/rules.mk

Use LTO_ENABLE as short for LINK_TIME_OPTIMIZATION_ENABLE

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Update keyboards/mode/eighty/readme.md

Puts a single image embedded in the readme, and links to the full gallery

Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>

* Update keyboards/mode/eighty/readme.md

Use * for markdown list

Co-authored-by: Ryan <fauxpark@gmail.com>

* Apply suggestions from code review

Correct comment characters

Co-authored-by: Ryan <fauxpark@gmail.com>

* Adjusted copyright name, USB descriptor and removed info.json

* Separate Mode80 S and H firwares into subfolders

* Added info.json files for QMK Configurator

* Lowercase folder and filenames

* Remove config definition macros in M80H

* Remove config definition macros in M80S and root

* Change definitions to lowercase parameters

* Moce chconf and mcuconf chibiOS files to root folder

* Move halconf to root folder, keymaps to subfolders

* Update readme for building/flashing guide

Co-authored-by: Ryan <fauxpark@gmail.com>

* Add layers to VIA keymaps, remove CONSOLE_ENABLE

* Push master changes to lib/

* Retrieve lufa and googletest submodules to previous heads at master

* Disabled LTO in VIA keymaps

* Fix layout declaration to lowercase in m80s default keymap

* Added readme's for each M80S and M80H

Co-authored-by: Jaicob <jaicob@icloud.com>
Co-authored-by: Gondolindrim <alvaro.augusto.volpato@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
2020-12-30 01:27:33 +00:00