alvierahman90/qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
16,120 Commits 48 Branches 349 Tags 167 MiB
e628051505
Commit Graph

1494 Commits

Author SHA1 Message Date
Ryan
d66090af19
backlight.c: include eeprom.h (#13024) 2021-05-28 09:04:13 -07:00
Ryan
06aea834c4
Backlight: add defines for default level and breathing state (#12560) 2021-05-26 22:21:15 -07:00
QMK Bot
a78964c918 Merge remote-tracking branch 'origin/master' into develop 2021-05-26 18:50:04 +00:00
Erovia
8ba537fa23
Keyboard: Planck THK (#12597) 
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Jack Humbert <jack.humb@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
 2021-05-26 20:49:30 +02:00
Drashna Jaelre
a0fed0ea17
Convert Encoder callbacks to be boolean functions (#12805) 
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
 2021-05-21 23:17:32 -07:00
Donald Kjer
8e96c5a060
Add support for up to 4 IS31FL3733 drivers (#12342) 
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
 2021-05-21 21:42:39 -07:00
Michael Stapelberg
82aa9ad4a5
matrix: wait for row signal to go HIGH for every row (#12945) 
I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.
 2021-05-20 06:43:36 +10:00
Matthes W
6c7450dad7
Add function to allow repeated blinking of one layer (#12237) 
* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage
 2021-05-16 20:59:02 -04:00
Joakim Tufvegren
cbdc3fb81b
Fix spelling mistake regarding LED Matrix in split_common. (#12888) 2021-05-14 03:37:24 +10:00
Ryan
92fbadeb1b
Rename point_t -> led_point_t (#12864) 2021-05-13 09:17:18 +10:00
Zach White
38d8d5445e
Remove KEYMAP and LAYOUT_kc (#12160) 
* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc
 2021-05-11 10:10:31 -07:00
Ryan
3edc43964d
LED Matrix: Effects! (#12651) 2021-05-11 13:41:06 +10:00
QMK Bot
6bb9113e27 Merge remote-tracking branch 'origin/master' into develop 2021-05-10 22:38:06 +00:00
Drashna Jaelre
a116b3f1ae
Improve EEPROM defaults for Dynamic Keymaps (#12853) 2021-05-10 15:37:36 -07:00
github-actions[bot]
f5b6bef4b3
[CI] Format code according to conventions (#12772) 
Co-authored-by: QMK Bot <hello@qmk.fm>
 2021-05-02 05:15:50 +10:00
XScorpion2
3c2e69af79
Fixing transport's led/rgb matrix suspend state logic (#12770) 2021-05-01 12:14:17 -07:00
github-actions[bot]
39bc8163d0
[CI] Format code according to conventions (#12731) 
Co-authored-by: QMK Bot <hello@qmk.fm>
 2021-04-29 13:36:47 +10:00
Drashna Jaelre
d8167779cd
Change RGB/LED Matrix to use a simple define for USB suspend (#12697) 2021-04-29 12:39:54 +10:00
Nick Brassel
0a8e37509b
Fix bad PR merge for #6580. (#12721) 2021-04-28 11:42:53 +01:00
Xelus22
9cf82fae95
Add STM32L433 and L443 support (#12063) 
* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

Co-authored-by: Nick Brassel <nick@tzarc.org>

* Include L443 in compatible microcontrollers

Co-authored-by: Nick Brassel <nick@tzarc.org>

* Update config bootloader jump description

Co-authored-by: Nick Brassel <nick@tzarc.org>

* Update ChibiOS define reasoning

Co-authored-by: Nick Brassel <nick@tzarc.org>

* Update quantum/mcu_selection.mk

Co-authored-by: Nick Brassel <nick@tzarc.org>

* fix git conflict

Co-authored-by: Nick Brassel <nick@tzarc.org>
 2021-04-26 13:07:15 +10:00
Purdea Andrei
3f7350732c
Add support for MCU = STM32F446 (#12619) 
* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

Co-authored-by: Nick Brassel <nick@tzarc.org>

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

Co-authored-by: Nick Brassel <nick@tzarc.org>
 2021-04-25 18:59:25 +10:00
QMK Bot
ab6d07b585 Merge remote-tracking branch 'origin/master' into develop 2021-04-25 03:42:04 +00:00
Sergey Vlasov
da6e888a32
Do not leak weak mods from tap dance to the interrupting keypress (#12471) 
Tap dance callbacks may register weak mods; one case when it happens
is when a tap dance registers a key with modifiers.  When the tap
dance is interrupted by pressing another key, these weak mods could
affect the interrupting key (normally any stale weak mods are cleared
at the start of action_exec() when handling a keypress event, but the
tap dance interrupt check code is called later, and the weak mods left
by that code were not cleared).  Add another clear_weak_mods() call to
preprocess_tap_dance() to make sure that the interrupting keypress is
not affected by unrelated weak mods from the previous tap dance.

Fixes #12445.
 2021-04-25 13:41:37 +10:00
Nick Brassel
891d18d356
Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600) 
* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h
 2021-04-25 13:40:56 +10:00
github-actions[bot]
d8f113bf98
Format code according to conventions (#12680) 
Co-authored-by: QMK Bot <hello@qmk.fm>
 2021-04-25 10:34:38 +10:00
Daniel Rodríguez Rivero
26b9b3aa23
feat: infinite timeout for leader key (#6580) 
* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs
 2021-04-25 10:22:47 +10:00
github-actions[bot]
15ff1927db
[CI] Format code according to conventions (#12650) 
Co-authored-by: QMK Bot <hello@qmk.fm>
 2021-04-22 19:26:17 +10:00
Ryan
d6ab908272
LED Matrix: Split (#12633) 2021-04-22 19:21:13 +10:00
Ryan
cb19c0906e
LED Matrix: Reactive effect buffers & advanced indicators (#12588) 2021-04-20 17:38:44 +10:00
Drashna Jaelre
c02137a0d2
Add Per Key functionality for AutoShift (#11536) 
Co-authored-by: Ryan <fauxpark@gmail.com>
 2021-04-19 20:34:14 -07:00
github-actions[bot]
230f09ca17
[CI] Format code according to conventions (#12623) 
Co-authored-by: QMK Bot <hello@qmk.fm>
 2021-04-19 20:19:16 +10:00
QMK Bot
2c0b3649fb Merge remote-tracking branch 'origin/master' into develop 2021-04-19 07:32:45 +00:00
Sergey Vlasov
fe9bd0afb9
Fix F303 audio output on A4 with the dac_basic driver (#12480) 
The dac_basic driver did not work properly with `#define AUDIO_PIN A4`
(instead of configuring the A4 pin, the driver actually was switching
the A5 pin to analog mode, breaking any other usage of that pin in
addition to emitting a distorted signal on the improperly configured
A4 pin).  Fix the code to configure the A4 pin as intended.
 2021-04-19 00:32:14 -07:00
Drashna Jaelre
180a32ec59
Enhancement of WPM feature (#11727) 2021-04-18 23:26:37 -07:00
Joshua Diamond
e2289ffac0
Add missing RGB_MODE_TWINKLE / RGB_M_TW keycodes (#11935) 
* Add missing RGB_MODE_TWINKLE / RGB_M_TW keycodes

* Better comment

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Ryan <fauxpark@gmail.com>
 2021-04-15 19:32:17 -04:00
Ryan
53eb35b6cf
LED Matrix: Task system (#12580) 2021-04-15 12:08:52 +10:00
github-actions[bot]
333cd4ec9b
[CI] Format code according to conventions (#12570) 
Co-authored-by: QMK Bot <hello@qmk.fm>
 2021-04-13 19:58:34 +10:00
Ryan
ce99f98bb5
LED Matrix: suspend code (#12509) 2021-04-13 19:51:03 +10:00
Ryan
40c314fe5c
LED Matrix: Implement CIE1931 curve (#12417) 2021-04-07 20:06:11 +10:00
Nick Brassel
64a0f5a659
Add support for producing UF2-format binaries. (#12435) 
* First stab at enabling builds of UF2-format binaries.

* Add description on producing a UF2 file.
 2021-04-06 16:39:15 +10:00
github-actions[bot]
733c861052
Format code according to conventions (#12467) 
Co-authored-by: QMK Bot <hello@qmk.fm>
 2021-04-03 08:35:26 -07:00
QMK Bot
dd7f18f65f Merge remote-tracking branch 'origin/master' into develop 2021-04-03 15:29:28 +00:00
Zach White
41f649c9a9 fix line endings 2021-04-03 08:27:46 -07:00
TurtleHunter
a3cd1290be
3 new LED effect animations (#9827) 
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Erovia <Erovia@users.noreply.github.com>
 2021-04-03 16:41:54 +02:00
Ryan
8880e89bcd
Big quantum_keycodes cleanup (#12249) 2021-04-02 17:45:56 -07:00
Ryan
2ae38e9c43
LED Matrix: Config functions (#12361) 2021-03-28 17:59:44 +11:00
QMK Bot
e2b652d95f Merge remote-tracking branch 'origin/master' into develop 2021-03-25 12:41:48 +00:00
Drashna Jaelre
57475caab0
Fix issues when manually shifting characters and Auto Shift (#12083) 
Specifically, when using the Auto-Shift feature, if you hold and roll shift, it would not actually shift the character that you hit after the shift
 2021-03-25 23:41:19 +11:00
QMK Bot
2df1b124a7 Merge remote-tracking branch 'origin/master' into develop 2021-03-25 12:11:36 +00:00
즈눅
816f2f9cc2
Fix Kinetic speed condition (#12139) 2021-03-25 23:11:16 +11:00