* Add Per Key functionality for AutoShift (#11536)
* LED Matrix: Reactive effect buffers & advanced indicators (#12588)
* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)
* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)
* LED Matrix: Split (#12633)
* [CI] Format code according to conventions (#12650)
* feat: infinite timeout for leader key (#6580)
* feat: implement leader_no_timeout logic
* docs(leader_key): infinite leader timeout docs
* Format code according to conventions (#12680)
* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)
* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)
Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).
* Update ADC docs to match the actually used resolution
ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly. Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).
* Fix pinToMux() for B12 and B13 on STM32F3xx
Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.
* Add support for all possible analog pins on STM32F1xx
Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families). Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).
Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.
* Add support for all possible analog pins on STM32F4xx
Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.
Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.
Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.
* Fix STM32F3xx ADC mux table in documentation
The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).
* Add STM32F1xx ADC pins to the documentation
* Add STM32F4xx ADC pins to the documentation
* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)
* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.
* Update flashing.md
* Update chconf.h
* Update config.h
* Update halconf.h
* Update mcuconf.h
* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)
* Add support for MCU = STM32F446 (#12619)
* Add support for MCU = STM32F446
* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h
* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64
* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.
* Format code according to conventions (#12682)
* Format code according to conventions (#12687)
* Add STM32L433 and L443 support (#12063)
* initial L433 commit
* change to XC
* fix L433
* disable all peripherals
* update system and peripheral clocks
* 433 change
* use its own board files
* revert its own board files
* l433 specific change
* fix stm32l432xx define
* remove duplicate #define
* fix bootloader jump
* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h
* move to L443
* move to L443
* fix sdmmc in mcuconf.h
* include STM32L443
* add L443
* Include L443 in compatible microcontrollers
* Include L443 in compatible microcontrollers
* Update config bootloader jump description
* Update ChibiOS define reasoning
* Update quantum/mcu_selection.mk
* fix git conflict
* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)
* Fix bad PR merge for #6580. (#12721)
* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)
* [CI] Format code according to conventions (#12731)
* Fixing transport's led/rgb matrix suspend state logic (#12770)
* [CI] Format code according to conventions (#12772)
* Fix comment parsing (#12750)
* Added OLED fade out support (#12086)
* fix some references to bin/qmk that slipped in (#12832)
* Resolve a number of warnings in `qmk generate-api` (#12833)
* New command: qmk console (#12828)
* stash poc
* stash
* tidy up implementation
* Tidy up slightly for review
* Tidy up slightly for review
* Bodge environment to make tests pass
* Refactor away from asyncio due to windows issues
* Filter devices
* align vid/pid printing
* Add hidapi to the installers
* start preparing for multiple hid_listeners
* udev rules for hid_listen
* refactor to move closer to end state
* very basic implementation of the threaded model
* refactor how vid/pid/index are supplied and parsed
* windows improvements
* read the report directly when usage page isn't available
* add per-device colors, the choice to show names or numbers, and refactor
* add timestamps
* Add support for showing bootloaders
* tweak the color for bootloaders
* Align bootloader disconnect with connect color
* add support for showing all bootloaders
* fix the pyusb check
* tweaks
* fix exception
* hide a stack trace behind -v
* add --no-bootloaders option
* add documentation for qmk console
* Apply suggestions from code review
* pyformat
* clean up and flesh out KNOWN_BOOTLOADERS
* Remove pointless SERIAL_LINK_ENABLE rules (#12846)
* Make Swap Hands use PROGMEM (#12284)
This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.
* Fix another bin/qmk reference (#12856)
* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)
* Fixup build errors on `develop` branch. (#12723)
* LED Matrix: Effects! (#12651)
* Fix syntax error when compiling for ARM (#12866)
* Remove KEYMAP and LAYOUT_kc (#12160)
* alias KEYMAP to LAYOUT
* remove KEYMAP and LAYOUT_kc
* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)
* Rename `point_t` -> `led_point_t` (#12864)
* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)
* Add missing LED Matrix suspend code to suspend.c (#12878)
* LED Matrix: Documentation (#12685)
* Deprecate `send_unicode_hex_string()` (#12602)
* Fix spelling mistake regarding LED Matrix in split_common. (#12888)
* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)
* Use milc.subcommand.config instead of qmk.cli.config (#12915)
* Use milc.subcommand.config instead
* pyformat
* remove the config test
* Add function to allow repeated blinking of one layer (#12237)
* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time
* Update doc
* Rework rgblight blinking according to requested change
* optimize storage
* Fixup housekeeping from being invoked twice per loop. (#12933)
* matrix: wait for row signal to go HIGH for every row (#12945)
I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/
Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.
After this commit, all keyboard matrix rows are interpreted correctly.
I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.
* ensure we do not conflict with existing keymap aliases (#12976)
* Add support for up to 4 IS31FL3733 drivers (#12342)
* Convert Encoder callbacks to be boolean functions (#12805)
* [Keyboard] Fix Terrazzo build failure (#12977)
* Do not hard set config in CPTC files (#11864)
* [Keyboard] Corne - Remove legacy revision support (#12226)
* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)
* Add Full-duplex serial driver for ARM boards (#9842)
* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)
* Backlight: add defines for default level and breathing state (#12560)
* Add dire message about LUFA mass storage bootloader (#13014)
* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)
Was causing compiler errors on some systems.
* Fix keyboards/keymaps for boolean encoder callback changes (#12985)
* `backlight.c`: include `eeprom.h` (#13024)
* Add changelog for 2021-05-29 Breaking Changes merge (#12939)
* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version
* Add recent develop changes
* Sort recent develop changes
* Remove sections for ChibiOS changes per tzarc
No ChibiOS changes this round.
* Add and sort recent develop changes
* add notes about keyboard moves/deletions
* import changelog for PR 12172
Documents the change to BOOTMAGIC_ENABLE.
* update section headings
* re-sort changelog
* add additional note regarding Bootmagic changes
* remove changelog timestamp
* update dates in main Breaking Changes docs
* fix broken section anchors in previous changelogs
* add link to backlight/eeprom patch to changelog
* highlight some more changes
* link PRs from section headers
* Restore standard readme
* run: qmk cformat --core-only
* Update other keyboards for rgb matrix changes
* Remove customized bootmagic code
* Fix corne layout compilation error
* Fix compiler errors with all keymaps
* Add Simple Visualizer for ergodox infinity
* Fix compile issue with Corne
* Fix keymap stuff
* Add alias for mouse layer
* Add Halmak Keyboard layout
* Updates for Kyria
* Add support for oled interval
* Change RGB stuff
[CHANGE] Fix coexistence issues
* Fix rgb_stuff
* Add custom ploopyco mouse keymap
* Decrease default dwell time
* Updates based on last breaking changes update
* Disable command on dactyl
* Update ergodox to use proper commands for rgb matrix indicators
* Update all rgb matrix indicator functions
* Update rules for dactyl-manuform
* Reduce wait time for mouse layer off event
* Add more info to logger
* Add wrappers for get_tapping term
* Move version.h include into only file that actually needs it
* Update rgb sleep stuff
* Update key print function
* Change DM keymap settings
* Change pin for DM Manuform
* Add Proton C stuff for Corne keymap
* more arm corne tinkering
* Even more arm stuff for corne
* Cleanup corne stuff
* redirect default keymap to drashna
because I am a very bad man
* change corne rgb priority
* Update tractyl manuform to not conflict
* Add more secret stuff
* more dactyl tweaks
* Add more options to split transport
* Changes of oled support
* Change split settings
* Improve keylogger formatting more
* tweak oled stuff
* Oled and such tweaks
* Reduce brightness due to leds
* Decrease brightness more
* Only run layer code if master
* Add Launchpad keymap
Note: RGB and Audio won't work when using B pins for audio
* Add support for rgb matrix on launchpad
* Update config for launchpag
* Disable wait on layer change
* Update config for ErgoDox EZ
* Fixup rgb light userspace code
* Move Corne layout to community layouts folder
* Update config for corne to support community layouts
* Add license header to files
* Minor cleanup of userspace config
* Update Pimironi Trackball code
* Increase debounce time on ergodox
* Fix keymap handling
* Enable wait for USB for moonlander
* Update/add license headers
* fix review issues
OLED Display fixes
Add support for RGBLIGHT Layers
Add gaming layer to corn and kyria
RGBLight Startup Animation fixes and improvements (uses matrix_scan now!)
Pimoroni Trackball support added (IT'S RGB!!!)
Fix issues due to code changes
* Enable External EEPROM on Planck Rev6
* Update KC_MAKE macro to use qmk cli util
* Disable additional gradients for rgb matrix
* Update analog code for newer methods
* Update ergodox layout
* Disable Grave Escape
* Cleanup OLED code a bit
* Remove old unicode code
* Seperate RGB Matrix code from RGB Light code in userspace
* Massive overhaul an generalization of personal OLED code
Now lets hope I NEVER get a keyboard using a 128x32 in a normal orientation.
* Super tiny cleanup
* Enable Diablo layer on kyria
* clang format pass
* Additional OLED cleanup
* Rename UC_OSX (and related constants) to UC_MAC
* Update UNICODE_SONG_OSX references to UNICODE_SONG_MAC
* Update UC_M_OS references to UC_M_MA
* Add UC_OSX alias for backwards compatibility
* Add deprecation warning for UC_OSX to Unicode docs
* Add UC_M_OS alias for backwards compatibility
* Update newly found UC_M_OS and UNICODE_SONG_OSX references
* Add legacy UNICODE_MODE_OSX alias, revert changes to user keymaps
* Add legacy UNICODE_SONG_OSX alias, revert changes to user keymaps
* Replace removed sounds in Unicode song doc examples
* ifdef rgb stuff like a madman for RGB Coexistance
* Re-enable RGB Light on Planck
* fix RGB Coexistance issue
* Tweak feature settings for Ergodox EZ Glow
* Their powers combine, and I am Captain RGB
This one is for noroadsleft and yan.
* Limit brightness when both RGB features are enabled
* Change shutdown method
* Add RGB Coexistience stuff to keymap
* disable RGBLIGHT_SLEEP until a solution can be found
* Disable Unicode on the kyria
* Fix up Iris rev defines
* Fix up community layouts to compile properly
* Cleanup rgb stuff
* Merge ergodox keymaps
* Update CCCV macro to use tap_code16
* Enable Solenoid on C39
Because josh couldn't
* Enable RGB Light, not Matrix on rev6 keymap
* Only enable LTO on non-ARM boards
* Clean up Bootmagic OLED display
* Enable RGBLIGHT_SPLIT on kyria
Not that it does anything
* Add hotkey for discord
* Add Kyria Keymap
* Enable all RGBLIGHT Animations for ARM and high capacity AVR
* Reduce GNUC version for __has_include
* Cleanup Ortho 4x12 Community layout
* Update Collide 39 keymap
* Cleanup Keymaps
* Enable full 30 LEDs for Ergodox
* Change EEPROM Load timing
* Use RGB Matrix on Planck Rev6
* Use correct keymap swap
* Enable everything for ARM
* Only enable rgb sleep on avr until crash is fixed
* Add additional Kyria keymap config
* Overhaul Kyria OLED display
* Improve kyria keymap based on usage
* Minor tweaks to rules
* Update OLED code to truncate properly
* Fix RGB Light layer indication
* Switch all of biton32 to get_highest_layer function
* Fix OLED Keylogger display
* Run qmk cformat over all of my user files
* Slight tweak to kyria based on usage
* Move around LALT_T config
* Add comments about base wrappers to keymaps
* Another cformat pass
* Temp fix for VUSB boards and NKRO
* Convert tabs to spaces in rules.mk files
* Only enable RGBLight if it's enabled
* Add Encoder Flip setting
* Update OLED font file
* Change RGBLight pin for Planck Light
Move it to A0, so that the SPI? pins are available for BT hackery
* Add QMK DFU bootloader info
* Add Solenoid
* Disable annoying white LED on bottom
* Enable Solenoid on Corne
* Remove bounds for animations
* Increase debounce for Ergodox EZ to reduce repeat key issues
* Set swap hands key to be a hold-tap key
This way, it's not ANNOYING and doesn't swap the hands inteniontally
* Move MT Alt in Corne keymap
* Re-Add fine tuned control of secrets
* Squash mods to single row
* Add LRA settings to haptic feedback settings for Rev6
* Fix issue with non-Planck EZ keymaps
* Add 40 Percent Nano with Analog Joystick
* Add Collide39 keymap
* Fix OLED printing to be more flavorful
* Fix up Iris GamePad and come cleanup
* Expand OLED char map further
* Add modded characters to keylogger
* Here be dragons
Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
* Fix up rules for community layouts
* Some more OLED tweaks
* Add mod mask check function
* Change QMK DFU Audio pin to be correct
* Use manual STM config instead of CTPC for Collide 39
* Add a quefrency keymap
* New Alt-ernate layouts
* Enable Per Key Tapping Term to preserve sanity
* Use underglow and mod lights for status on Corne
* Update the drashna_ms keymap for quefrency
* Disable Audio since there isn't enough space
* Update KC_MAKE to ues :flash target
* Cleanup ergodox layout
* Enable i2c support for Iris
* Add keymap support for CG_SWAP
* Enable RGB Matrix Shutdown mode
* enable heatmap
* Update gitlab CI to install python3
* Remove game macros
These are no longer needed, and haven't been used in ages
* Cleanup planck layout
* Add RGB Matrix fun and RGB cleanup
* Add keycode and config for RGB Matrix idle animations
* Clean up rgb idle animation code
* Add rgb idle keycode to keymaps
* Fix issues with rgb matrix idle animation
* Fix some handling for idle animation
* Reduce idle animation timeout to 15s to be more reasonable
* fix up rgb stuff
* Fix isses with rgb functions not being called for matrix
* Use custom EEPROM Magic Number so testing is easier
* Extend Default Layer macro to support a lot more layers
* Fix bjohnson macropad
* Adjust KC_MAKE to process mods for more consistent behavior
* Fix up rgb stuff on corne
* Corne OLED Overhaul
* Fixes a number of issues with weirdness.
* Fixes issues with keylogger (should be more reliable now)
* Modulaize the OLED render sections
* Rewrite layer display code
* Update URL for Font Editor
Due to odd issues, I ended up rewriting from scratch. And using PROGMEM versions, since I think I was getting memory overflows.
* Update polling rate on all keebs
* Fix planck ez layout config
* Remove macros from Viterbi
* Fix my Tap Dance issues after I broke them
* Cleanup and organization of userspace documentation
As well as some additional cleanup of functions due to review of documentation.
* Enable Tapdance on Glow and remove more animations
* Revert to Eager PR debouncing
* Add better check for startup animation
* Move where RGB Matrix defines are listed
* Limit RGB Matrix max val
* Update keyboard for Iris Rev 3 conflicts
* Enable encoder support on planck ez
* Remove is_master check from corne\'s OLED code
* Overhaul OLED screens for my Corne
* One last removal
* Show RGB valu On both sides
* Updates for OLED display info
* Fix compile issues for rgb config
* Disabled Space Cadet for all drashna keymaps
* Fix OLED Screen configs
* Minor OLED Tweaks
* Revert some Iris changes
* Fix song include
* Handle MAKE macro for the Corne boards better
* Add super hacky-hack for eeconfig initialization
* Add audio support for Fractal since Elite Cs support it
* Add defines for keycode steps
* Add White layout
* Update Corne RGB info
* Add fun effects to layer indication for RGB Matrix enabled boards
* Use proper define for product name detection
* Update formatting
* Use custom timeout mechanism for OLED timeout
* Fix up OLED screen HSV code for new HSV structure
* Better handle turning off RGB Matrix when sleeping
* Disable MultiSplash Animation
* Change Iris back to using serial
* Why was RGB disabled?!?!?!
* Limit val in rgb_matrix_layer_helper function
* Remove EECONFIG setting for RGB matrix
* clean up rgb matrix extern usage
Moved rgb matrix boiler plate into macros
Rebased onto typing heatmap pr
* Fixing the reversed frame buffer access in digital rain
* Fixing digital rain & typing heatmap if keyreactive effects are not enabled
* Apply suggestions from code review
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Adding parenthesizes to DRIVER_LED_TOTAL where necessary
* Updated docs
* added notes about parentheses
* Disable a bunch of reactive modes
* Enable rgb matrix for Corne Keyboard
* Convert CRKBD to rgb matrix
* Add Gergo keyboard layout
* Make Diablo 3 tap dance better
* Add basic support for Planck EZ
* Fix RGB Matrix stuff
* Fix keycodes for Planck EZ
* Update CRKBD OLED stuff
* Fix typo for sleep on ergodox glow
* Improve my gergo layout
* Scrolling OLED key logger!
* Change gergo layout
* Hnadle unicode keycodes if unicode is disabled
* Disable COMMAND/CONSOLE for gergo
* Fix right side control
* Re-enable LTO for all platforms
Since I got updated arm gcc binaries that no longer error out on lto
* Update formatting to match newer community standards
Poor 2 space
* Re-alight startup animation to use new HUE range
* Streamline gitlab ci scripts
* Disabled Space Cadet
* Add support for breathing table
* Enable new LTO Option
And clean up defines that will now be repeatitive
* Remove vscode settings
* Additional formatting cleanup of config.h files
* Start to standardize macro timer
* Update Fractal layout
Specifically, limit the RGB Lighting, since it's too many for the power, and only have the KITT annimation on the front
* Update Iris keymap to use I2C for transport
* Remove TAP_CODE_DELAY from keyboard in favor of global setting
* Remove Woodpad
Since it\'s no longer in my possession
* Only enable LTO on AVR boards
* Run matrix_scans while doing startup light
* Run matrix_scan to get split keyboard code synced properly
* Fix rgb mode
* Remove custom debouncing settings
* Make RGB Light Startup Animation optional
* Fix opt def
* Remove extra tap code delay value
* Fix references to keebio boards
* Add support for LP Iris keyboard
* Add backlight code
* Make startup animation optional
* Update gitlab ci script
* Remove port declaration
* Revert avrgcc changes to gitlab ci file
* Don't re-set mods
* Remove MACRO_TIMER define
* Add custom name for crkbd
* Add name for Prime M pad
* Add names for ortho 4x12 boards
* Add some additional handling for rgb init
* Change thumb clusters on ergodox
* Switch Orthodox to I2C
* Fix Space in ergodox keymap
* Use OSL for ergodox layout
* Ugh, can't find a good layout
* Fix typo
* Fix up animation startup
* Cries in AVR
* Fix makefiles for ergodox ez boards
* Add support for "secret songs" in my userspace
* Reset debounce to 5ms for Ergodox EZ
* Fix gitlab CI yaml file
* More crying in AVR
* Cannot use rgb light and rgb matrix at the same time due to the WS2812 rgb matrix PR until the "Coexistance" PR is merged
* Update ODox for split common and i2c
* Add split config
* Impement Split code
* Add support for xscorpion OLED code
* Add OLED display config
* Fix OLED screen font
* Get OLED set up in vertical mode
* Remove old OLED code
* add per key support for crkbd
* Fix split changes
* RGB Tweeaks
* More OLED tweaks
* Fix rotation stuff
* Fix more OLED stuff
* Remove custom Debounce from Ergodox layout since it's no longer needed
* Use correct functions for dip switch code
* Some planck cleanup
* Hopefully fix RGB Sleeping with RGB Matrix
* Add rgbmatrix extern
* Add numpad 5x6 layout
* RGB Tweaks
* Add RGB startup animation
* Minor RGB Fixes
* Turn off RBG on planck
* Enable separate storage of EEPROM
* Update Macro pad
* Add BJohnson Keymap and minor darshna tweaks
* Clean up rgb and other code for new numpad
* Remove clicky hachy thing
* Update my code to use built in MOD_MASK defines
* Fix up modifier calls
* Tweak to KC_MAKE
* Tweak to KC_MAKE
* Add Semi-colon to numpad
* Preprocess out rgb matrix stuff if not enabled
* Formatting of KC_MAKE
* Add stuff for matrix and light rgb coexistance
* Fix bad spelling
* Change where layer indication shows based on rgblight status
* Force set mods in KC_MAKE
* Optimize CRKBD
* Make CRKBD keylogger output actually show tap keys
* check MT/LT for twinkling
* Add ortho 5x12 support for fractal keyboard
* Use newer interface for setting pins/ports
* Remove custom unicode methods
* Reomve unicode input info
* Odd rules issue
* Redefine REST note to be more pleasing
* Properly disable PM LEDs with GPIO commands
* Update gitlab CI yaml file
* Remove extra mod tap check
* Remove initial state on ergodox glow
* Rev6 Cleanup
* Fix KC_MAKE macro
* Update GitLab CI yaml file
* More GitLab CI changes
* One final GitLab CI change
* Remove unneeded unicode support
* Optimize KC_MAKE
* Break up files to make more readable
* Add comments to ortho 4x12 layout rules.mk
* Small tweaks
* Update GitLab CI scripts
* Make ortho boards smaller
* Fix reversed bool check in layer_state_set
* Add Quefrency 65 for a friend
* Add Ergodox EZ Glow keymap
* Add RGB Matrix Code
* Further changes to rgb matrix ErgoDox EZ
* Update bjohnson keymaps
* Fix CRKBD display
* Overhaul to corne keyboard
* Narrow scope for keylogger
* Minor layout tweaks to Corne Keyboard
* additional CRKBD tweaks
* Minor tweaks to CRKBD
* Add all characters for keylogger
* Ergodox EZ Glow overhaul
* Fix Ergodox EZ Glow layer colors
* Increase Tapping Term for Corne Keyboard
* Fix unicode-ish
* Revert some changes
* Add layer specific lighting effects
* Some minor tweaks to ergodox glow config
* revert changes to ergodox files
* Update Glow readme
* Add more tapping term defines
* Fix changes
* Fix ergodox keymap
* Hopefully fix sleeping
* Disable layer indications if rgb matrix is disabled
* Add support for sleeping and rgb layer change toggle to ergodox ez glow
* Make RGB Layer Indication Great Again
* Make Unicode Great Again
* Remove placeholder define
Co-Authored-By: drashna <drashna@live.com>
* Remove placeholder define
Co-Authored-By: drashna <drashna@live.com>
* Remove old EEPROM Reset keycode
* Consistency fixes and more eeprom defaults
* Handle setting Unicode mode on eeprom reset better
* Unicode EEPROM hack
* Re-enable permissive hold and ignore mod tap
* Set unicode input mode
* More unicode stuff
* more haaaaaacks
* Attempted RGB Cleanup
* Fix compiler issue
* Add GitLab CI config for personal compiling
* Add avr gcc version to GitLab CI script
* Add rgblight init to matrix init
* Preliminary additon of bootmagic lite functionality
* Cleanup code
* Clean up bootmagic code
* Add documentation and clean up code
* Make 'lite' an option for BOOTMAGIC_ENABLE
* Update Templates with note about Bootmagic Lite option
* Detect Debounce variable
* Make sure debounce is a non-zero number
* Capitalize Bootmagic
* Capitalize bootmagic
* Update wording
* Re-add EEPROM reset, by popular demand
And add eeprom-less version to drashna userspace for his sanity
* Fix spacing
* Set BOOTMAGIC_ENABLE to use full/lite/off
And default yes to "full" for compatibility
* Add Bootmagic lite info to templates
* Remove text from makefiles
* Cleanup of makefile
* mention yes in bootmagic docs
* Wordsmitthing the docs
* Fix white spaces
* Readd default bootmagic setting, because it's necessary
* Fix up userspace after feature merges
* Add new macros for keyboard layouts
* Keep new layouts in keymap for easy reference
* Cleanup layouts
* Fix CRKBD wrappers
* Fix up comments
* Fix spacing in orthodox base layer
* ergodox related cleanup
* Make KC_MAKE only flash when holding shift
* Add option to fast compile boards
* Clean up rgb modes to save space
* Re-enable Swap Hands on my Iris
* Enabled unicode support and send_unicode function
* Unicode cleanup
* More unicode tweaking
* Update EEPROM stuff
* Account for keyboard macros
* Switch Equal to Plus on Ergodox
* more tweaks
* Minor Unicode tweaks
* Correct matrix printing for keylogger
* Fix unicode functions
* Fix unicode mode set since it actually uses EEPROM
* Re-add DISABLE_LEADER
* Ergodox is easier to hit the tapping term, fix that
* Fix stupid type on unicode mode check
* Preliminary CRKBD/HeliDox support
* Fixes to Helidox
* Cleanup userspace from old merge stuff
* Remove CCCV sounds
* Make Mode NOEEPROM Again
* Remove chording as it is not documented, not used, and needs work.
* Make Leader Key an optional feature.
* Switch from `PREVENT_STUCK_MODIFIERS` to `STRICT_LAYER_RELEASE`
* Remove `#define PREVENT_STUCK_MODIFIERS` from keymaps.
* Make tap function inline
* Use better makefile keyboard detection
* Remove Copy-Paste macro
* Add F11/F12 to Iris
* Minor tweaks to userspace config
* Set audio clicky randomness to 1.5
* Set NO_DEBUG to only be set if console is not enabled
* Move NO_MUSIC_MODE to userspace config.h
* Reduce Ergodox Debounce
* Add Planck Light config
* Use OSM for ortho 4x12
* Music Mode changes for planck light
* Cleanup do to shutdown user and other fixes in Master
* Add and use 'shutdown_user' fzunction
* Remove global NO_MUSIC_MODE define
* Add NO_MUSIC_MODE to individual keymaps
* Change layer colors
* Remove NO_PRINT and NO_DEBUG from userspace config.h
Since these are automatically disabled if the console isn't enabled.
* Remove backlight code if backlight isn't enabled
* Remove Twinkle from Ergodox
* Disable RGB twinkling and enable PSM
* Clean up RGB matrix code
* Clean up planck light indicators
* Clean up tap code
* Rules cleanup for ortho 4x12
* Fix up userspace template
* Revert "Clean up tap code"
This reverts commit 09f64d6d67aa021c3b5ac86a9a739a5ca2b9c1ec.
* Organize includes
* userspace cleanup
* Fix modifier spelling error
* Fix userspace rules
* Disable Permissive Hold again
* Minor clean up
* Fix Tap stuff
* Viterbi Updates for file size
* Use string with delay
* Add skipped region to ergodox
* Add send string config
* Use default_layer_state instead of function
* Fully generalize keyboards
* old iris cleanup
* Fix Drashna keymap compile issues
By checking to see if secret.c exists before actually trying to add it
* Remove unnecessary references
* Add 4x12 ortho board
* Update userspace readme for secrets
* Make RGB more modular
* Fix iris keymap, since we don't need the lower left (Function keys)
* Fix includes
* Add Blanks
* Fix Ergodox lower layer
* Add suspend commands
* Add Maltron Layout
* Add additional layouts
* Finish adding gamepad to Iris
* Tweaks to iris gamepag layer
* make gaming layers more friendly
* minor gaming layer tweak
* Add Carplax
* Add modded key timer function
* Cleanup and macro documentation
* Add QMK DFU info
* Add 'old' keymap for 12 LED spare
* Update Pro Micro documentation
* Disable twinkling so it fits in firmware space
* Switch to QMK DFU bootloader, since it's better anyhow
* Write default layer state colors to EEPROM
Since we are writing to EEPROM anyways, and this way, it sticks on reboot
* Fix QMK DFU bootloader options
* More updates for QMK DFU support
* Use matrix scanning hack for startup_user until #3113 gets merged
* Fix indicator light consistency issue
* Add/readd ifdefs to indicators
* Add/readd alt indicator
* Remove RGB Twinkling from Viterbi macro pad
* Fix default layer color detection
* Fix rebase and detection issues
* Cleanup code so it will compile if RGBLIGHT is disabled
* Revert vsode settings
* Use Pragma Once instead of boilerplate code
* Optimize secrets code
* Orthodox tweaks
* rules.mk features
* Minor cleanup
* Revert mod bits
* Force Hold breaks One Shot Tap Toggle
* Cleanup
* Moke keymaps more consistent
* minor ergodox tweak
* More OSM for the Orthodox
* Cleanup of userspace
* Toggle Secrets
* Add hidden process record for super secret macros
* Make sure secret macros always compiles
* finish up making them super secret
* Add ColinTA's rgb twinkle as WIP
* Optimize RGB Twinkling for typing
Also, tweak RGB indicators.
AND WTF, I HAVE NO IDEA WHY THE INDICATORS ONLY WORK AS IS. The logical method for getting them working doesn't ... and it's beyond bizarre
* Make console logging more configurable
* Indicator travisty
* Clean up userspace rgb code
* Optimize RGB Twinking to work on default layer only, and to base it's color on the curent hue
* Eff it... rgblight_sethsv_at runs at every matrix scan
* RGB Twinkle cleanup
* Update Iris code for new board
* Move RGB Indicator and RGB Twinkle into userspace
* Move RGB Indicator code to rgb_stuff.c
* Major cleanup of RGB Code in userspace
* Additional cleanup of RGB code in userspace
* Use noeeprom functions to save my boards!
* Enable RGB Sleep on all boards now
* Add old iris board
* tapping tweak
* Use byte 19 for eeprom to prepare for possible merge of eeconfig function pr
* Add code to fix default layer after eeprom reset
* More Iris Tweaks
* Mess with iris arrow keys
* Massive layout overhaul to make everything more OLKB
* Additional tweaks
* Cleanup Userspace
Remove unused layer code, and properly set userspace eeprom structure.
* EEPROM stuff
* Only use indicators if layer indication is enabled
* Iris and Orthodox Tweaks (Status Indicators)
* Additional tweaks to finish tri layer conversion
* Disable ProMicro ligths globally
* Add Pro Micro hacking info
* Successfully get mod indication working on thumb clusters
* Enable printing when console is enabled
* Make Modifier Indicator lights more modular
* Keymap cleanup
* Tapping test changes
* Cleanup and minor tweaks
* Fix Unicode sample
* Add irony mark
* Remove unpretty keymaps
* Add QMK DFU and Conditional Music Mode
* Unicode fixes
* Unicode fixes
* Make layer indication more modular
* Finish removing Faux Click
* Cleanup of UserSpace and addition of 'update_tri_layer_state' function
* Add modifier status indicators to Orthodox
* Remove tri layer function
* Minor tweaks
* Remove the Orthodox's Indicator's reliance on layer_state_set
* Add custom EEPROM settings
* Make EEPROM config more efficient
* Viterbi Config
* Add Iris Keyboard layout and Userspace cleanup
* Iris keyboard tweaks
* Use Grave Escape on Iris
* Update Readmes
* Re-add NO_SECRETS option
* Add Thumb Clusters defines for default layout
* Minor tweaks
* More Minor tweaks
* Revert Orthodox layers and move function keys around
* Fix keymap so it will compile under the Infinity
Since I haven't added 'pretty' layouts to it yet
* Cleanup of userspace
* Cleanup keymaps
* OMG fix Workman
* Move mods layer key around
* Reduce debounce in Ergodox EZ
* Fix Infinity layers
* Add list of pins used by Ergdox EZ for easy reference
* Revert "Reduce debounce in Ergodox EZ"
This reverts commit 8a3db2673b419ef8032c40a6d29156cef632f9cd.
* Add Clicky toggle to Orthodox
* Fix Audio Clicky keycode
* Enable Faux Clicky by default
* Add Unicode stuff
