Create info.json

* Update info.json

* Update info.json

* Update info.json

* Update info.json

.travis.yml

@@ -11,7 +11,7 @@ env:
   global:
   - secure: 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
 before_install:
-  - wget http://www.atmel.com/images/avr8-gnu-toolchain-3.5.4.1709-linux.any.x86_64.tar.gz || wget http://qmk.fm/avr8-gnu-toolchain-3.5.4.1709-linux.any.x86_64.tar.gz
+  - wget http://ww1.microchip.com/downloads/en/DeviceDoc/avr8-gnu-toolchain-3.5.4.1709-linux.any.x86_64.tar.gz || wget http://qmk.fm/avr8-gnu-toolchain-3.5.4.1709-linux.any.x86_64.tar.gz
 install:
   - tar -zxf avr8-gnu-toolchain-3.5.4.1709-linux.any.x86_64.tar.gz
   - export PATH="$PATH:$TRAVIS_BUILD_DIR/avr8-gnu-toolchain-linux_x86_64/bin"

docs/config_options.md

@@ -70,6 +70,10 @@ This is a C header file that is one of the first things included, and will persi
   * pin of the backlight - B5, B6, B7 use PWM, others use softPWM
 * `#define BACKLIGHT_LEVELS 3`
   * number of levels your backlight will have (not including off)
+* `#define BACKLIGHT_BREATHING`
+  * enables backlight breathing (only works with backlight pins B5, B6 and B7)
+* `#define BREATHING_PERIOD 6`
+  * the length of one backlight "breath" in seconds
 * `#define DEBOUNCING_DELAY 5`
   * the delay when reading the value of the pin (5 is default)
 * `#define LOCKING_SUPPORT_ENABLE`

docs/faq_keymap.md

@@ -127,7 +127,7 @@ https://github.com/tekezo/Karabiner/issues/403
 
 ## Esc and <code>&#96;</code> on a Single Key
 
-See the [Grave Escape](feature_grave_escape.md) feature.
+See the [Grave Escape](feature_grave_esc.md) feature.
 
 ## Arrow on Right Modifier Keys with Dual-Role
 This turns right modifier keys into arrow keys when the keys are tapped while still modifiers when the keys are hold. In TMK the dual-role function is dubbed **TAP**.

docs/feature_backlight.md

@@ -10,8 +10,30 @@ These keycodes control the backlight. Most keyboards use this for single color i
 |---------|------------------------------------------|
 |`BL_TOGG`|Turn the backlight on or off              |
 |`BL_STEP`|Cycle through backlight levels            |
-|`BL_x`   |Set a specific backlight level between 0-9|
+|`BL_ON`  |Set backlight to max brightness           |
-|`BL_ON`  |An alias for `BL_9`                       |
+|`BL_OFF` |Turn backlight off                        |
-|`BL_OFF` |An alias for `BL_0`                       |
 |`BL_INC` |Increase backlight level                  |
 |`BL_DEC` |Decrease backlight level                  |
+|`BL_BRTG`|Toggle backlight breathing				 |
+
+Note that for backlight breathing, you need to have `#define BACKLIGHT_BREATHING` in your config.h.
+
+## Configuration Options in `config.h`
+
+* `BACKLIGHT_PIN B7` defines the pin that controlls the LEDs. Unless you design your own keyboard, you don't need to set this.
+* `BACKLIGHT_LEVELS 3` defines the number of brightness levels (excluding OFF).
+* `BACKLIGHT_BREATHING` if defined, enables backlight breathing. Note that this is only available if `BACKLIGHT_PIN` is B5, B6 or B7.
+* `BREATHING_PERIOD 6` defines the length of one backlight "breath" in seconds.
+
+## Notes on Implementation
+
+To change the brightness when using pins B5, B6 or B7, the PWM (Pulse Width Modulation) functionality of the on-chip timer is used.
+The timer is a counter that counts up to a certain TOP value (`0xFFFF` set in ICR1) before resetting to 0.
+We also set an OCR1x register.
+When the counter reaches the value stored in that register, the PWM pin drops to low.
+The PWM pin is pulled high again when the counter resets to 0.
+Therefore, OCR1x basically sets the duty cycle of the LEDs and as such the brightness where `0` is the darkest and `0xFFFF` the brightest setting.
+
+To enable the breathing effect, we register an interrupt handler to be called whenever the counter resets (with `ISR(TIMER1_OVF_vect)`).
+In this handler, which gets called roughly 244 times per second, we compute the desired brightness using a precomputed brightness curve.
+To disable breathing, we can just disable the respective interrupt vector and reset the brightness to the desired level.

docs/feature_rgblight.md

@@ -41,6 +41,7 @@ You can change the behavior of the RGB Lighting by setting these configuration v
 | `RGBLIGHT_HUE_STEP` | 10 | How many hues you want to have available. |
 | `RGBLIGHT_SAT_STEP` | 17 | How many steps of saturation you'd like. |
 | `RGBLIGHT_VAL_STEP` | 17 | The number of levels of brightness you want. |
+| `RGBLIGHT_LIMIT_VAL` | 255 | Limit the val of HSV to limit the maximum brightness simply. |
 
 ### Animations
 

docs/getting_started_build_tools.md

@@ -53,6 +53,7 @@ If you're using [homebrew,](http://brew.sh/) you can use the following commands:
     brew install avr-gcc
     brew install dfu-programmer
     brew install gcc-arm-none-eabi
+    brew install avrdude
 
 This is the recommended method. If you don't have homebrew, [install it!](http://brew.sh/) It's very much worth it for anyone who works in the command line. Note that the `make` and `make install` portion during the homebrew installation of avr-libc can take over 20 minutes and exhibit high CPU usage.
 

docs/hardware_avr.md

@@ -101,8 +101,9 @@ By default QMK supports backlighting on pins `B5`, `B6`, and `B7`. If you are us
 
 ```
 #define BACKLIGHT_PIN B7
-#define BACKLIGHT_BREATHING
 #define BACKLIGHT_LEVELS 3
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 6
 ```
 
 {% hint style='info' %}

keyboards/acr60/config.h

@@ -5,11 +5,11 @@
 
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x2260
+#define PRODUCT_ID      0xCA60
 #define DEVICE_VER      0x0001
-#define MANUFACTURER    MechKeysCa
+#define MANUFACTURER    MECHKEYS
 #define PRODUCT         ACR60
-#define DESCRIPTION     ACR60 Keyboard
+#define DESCRIPTION     60% customizable keyboard
 
 /* key matrix size */
 #define MATRIX_ROWS 5

keyboards/acr60/readme.md

@@ -1,12 +1,15 @@
-# ACR60
+ACR60
+=====
 
 ![acr60](https://cdn.shopify.com/s/files/1/1697/5323/products/20170522001035_1024x1024.jpg?v=1504725199)
 
-A customizable 60% keyboard based on the DZ60.
+A customizable 60% keyboard made and sold by mechkeys.ca [More info on MECHKEYS](https://mechkeys.ca)
+
+Keyboard Maintainer: [TurboMech](https://github.com/TurboMech)
 
-Keyboard Maintainer: QMK Community  
 Hardware Supported: ACR60  
-Hardware Availability: [mechkeysca](https://mechkeys.ca/products/acr60)
+    
+Hardware Availability: [MECHKEYS](https://mechkeys.ca/products/acr60)
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/alu84/config.h

@@ -21,11 +21,11 @@
 
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
+#define PRODUCT_ID      0xCA75
 #define DEVICE_VER      0x0001
-#define MANUFACTURER    mechkeys.ca
+#define MANUFACTURER    MECHKEYS
 #define PRODUCT         ALU84
-#define DESCRIPTION     A 75% keyboard
+#define DESCRIPTION     75% keyboard
 
 /* key matrix size */
 #define MATRIX_ROWS 6

keyboards/alu84/keymaps/turbomech/keymap.c

@@ -102,12 +102,6 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
 	return MACRO_NONE;
 };
 
-	switch (id) {
-
-	}
-	return MACRO_NONE;
-}
-
 
 
 void matrix_scan_user(void) {

keyboards/alu84/readme.md

@@ -1,11 +1,15 @@
 ALU84
 ===
 
-A 75% keyboard kit made and sold by mechkeys.ca [More info on mechkeys.ca](https://mechkeys.ca)
+![alu84](https://i.imgur.com/wBfazDc.jpg)
+
+A 75% keyboard made and sold by MECHKEYS [More info on MECHKEYS](https://mechkeys.ca).
 
 Keyboard Maintainer: [TurboMech](https://github.com/TurboMech)
+
 Hardware Supported: ALU84
-Hardware Availability: [mechkeys.ca](https://mechkeys.ca)
+
+Hardware Availability: [MECHKEYS](https://mechkeys.ca)
 
 Make example for this keyboard (after setting up your build environment):
 

keyboards/atomic/keymaps/pvc/keymap.c

@@ -345,14 +345,14 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
         case MACRO_BREATH_SPEED_INC:
             if (record->event.pressed)
             {
-                breathing_speed_inc(1);
+                breathing_period_inc();
             }
             break;
 
         case MACRO_BREATH_SPEED_DEC:
             if (record->event.pressed)
             {
-                breathing_speed_dec(1);
+                breathing_period_dec();
             }
             break;
 
@@ -374,7 +374,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
             if (record->event.pressed)
             {
                 layer_on(LAYER_UPPER);
-                breathing_speed_set(2);
+                breathing_period_set(2);
                 breathing_pulse();
                 update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST);
             }
@@ -389,7 +389,7 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
             if (record->event.pressed)
             {
                 layer_on(LAYER_LOWER);
-                breathing_speed_set(2);
+                breathing_period_set(2);
                 breathing_pulse();
                 update_tri_layer(LAYER_LOWER, LAYER_UPPER, LAYER_ADJUST);
             }
@@ -403,13 +403,13 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
         case MACRO_FUNCTION:
             if (record->event.pressed)
             {
-                breathing_speed_set(3);
+                breathing_period_set(3);
                 breathing_enable();
                 layer_on(LAYER_FUNCTION);
             }
             else
             {
-                breathing_speed_set(1);
+                breathing_period_set(1);
                 breathing_self_disable();
                 layer_off(LAYER_FUNCTION);
             }

keyboards/bananasplit/config.h

@@ -42,7 +42,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 //#define MATRIX_HAS_GHOST
 
 /* number of backlight levels */
-#define BACKLIGHT_LEVELS  1
+#define BACKLIGHT_LEVELS 3
 
 /* mapping backlight LEDs to correct Pin */
 #define BACKLIGHT_PIN B7

keyboards/bananasplit/keymaps/coloneljesus/config.h

@@ -21,5 +21,7 @@
 
 // place overrides here
 #define GRAVE_ESC_CTRL_OVERRIDE
+#define BACKLIGHT_BREATHING
+#define BREATHING_PERIOD 8
 
 #endif

keyboards/bananasplit/keymaps/coloneljesus/keymap.c

@@ -16,7 +16,7 @@
 #include "bananasplit.h"
 
 enum custom_keycodes {
-  WIN_SWITCH_LAYOUT = SAFE_RANGE
+  WIN_SWITCH_LAYOUT = SAFE_RANGE,
 };
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
@@ -57,7 +57,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,  KC_F6,   KC_F7,         KC_F8,         KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, \
     KC_CAPS, KC_MPRV, KC_VOLU, KC_MNXT, KC_PGUP, KC_INS, KC_HOME, LCTL(KC_LEFT), LCTL(KC_RGHT), KC_END,  _______, _______, _______, KC_PSCR, \
     _______, KC_MUTE, KC_VOLD, KC_MPLY, KC_PGDN, KC_DEL, KC_LEFT, KC_DOWN,       KC_UP,         KC_RGHT, _______, _______, _______, \
-    _______,          _______, _______, _______, _______,_______, LCTL(KC_BSPC), LCTL(KC_DEL),  _______, _______, _______, _______, _______, \
+    _______,          BL_STEP, BL_BRTG, _______, _______,_______, LCTL(KC_BSPC), LCTL(KC_DEL),  _______, _______, _______, _______, _______, \
     _______, _______, _______,          _______, _______,_______,                _______,       _______, _______, _______, RESET \
 ),
 };
@@ -76,19 +76,19 @@ void matrix_scan_user(void) {
 
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
   switch (keycode) {
+
     case WIN_SWITCH_LAYOUT: {
       // Sends Alt+Shift on both key down and key up. 
       // Designed to switch between two keyboard layouts on Windows using a locking switch.
       // Does nothing if right shift is pressed for easy resync.
-      if (!(get_mods() & MOD_BIT(KC_RSFT))) {
+      if (!(get_mods() & MOD_BIT(KC_RSFT)))
         SEND_STRING(SS_DOWN(X_LALT)SS_TAP(X_LSHIFT)SS_UP(X_LALT));
       return false;
     }
-      else
+
-        return false;
+    default:
-    }
-  }
       return true;
+  }
 }
 
 void led_set_user(uint8_t usb_led) {

keyboards/chibios_test/teensy_lc_onekey/Makefile.3.0

@@ -1,77 +0,0 @@
-# Target file name (without extension).
-PROJECT = ch
-
-# Directory common source files exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# project specific files
-SRC =	matrix.c \
-	    led.c
-
-ifdef KEYMAP
-    SRC := keymap_$(KEYMAP).c $(SRC)
-else
-    SRC := keymap_plain.c $(SRC)
-endif
-
-CONFIG_H = config.h
-
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-# - For Teensies, FAMILY = KINETIS and SERIES is either
-#   KL2x (LC) or K20x (3.0,3.1,3.2).
-MCU_FAMILY = KINETIS
-MCU_SERIES = K20x
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
-# - LDSCRIPT =
-#   - MKL26Z64 for Teensy LC
-#   - MK20DX128 for Teensy 3.0
-#   - MK20DX256 for Teensy 3.1 and 3.2
-MCU_LDSCRIPT = MK20DX128
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-# - STARTUP =
-#   - kl2x for Teensy LC
-#   - k20x5 for Teensy 3.0
-#   - k20x7 for Teensy 3.1 and 3.2
-MCU_STARTUP = k20x5
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# - BOARD =
-#   - PJRC_TEENSY_LC for Teensy LC
-#   - PJRC_TEENSY_3 for Teensy 3.0
-#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
-BOARD = PJRC_TEENSY_3
-
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-# I.e. 6 for Teensy LC; 7 for Teensy 3.x
-ARMV = 7
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
-## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
-MOUSEKEY_ENABLE = yes	# Mouse keys
-EXTRAKEY_ENABLE = yes	# Audio control and System control
-CONSOLE_ENABLE = yes	# Console for debug
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes	    # USB Nkey Rollover
-
-include $(TMK_DIR)/tool/chibios/common.mk
-include $(TMK_DIR)/tool/chibios/chibios.mk

keyboards/chibios_test/teensy_lc_onekey/Makefile.3.2

@@ -1,77 +0,0 @@
-# Target file name (without extension).
-PROJECT = ch
-
-# Directory common source files exist
-TMK_DIR = ../../tmk_core
-
-# Directory keyboard dependent files exist
-TARGET_DIR = .
-
-# project specific files
-SRC =	matrix.c \
-	    led.c
-
-ifdef KEYMAP
-    SRC := keymap_$(KEYMAP).c $(SRC)
-else
-    SRC := keymap_plain.c $(SRC)
-endif
-
-CONFIG_H = config.h
-
-## chip/board settings
-# - the next two should match the directories in
-#   <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
-# - For Teensies, FAMILY = KINETIS and SERIES is either
-#   KL2x (LC) or K20x (3.0,3.1,3.2).
-MCU_FAMILY = KINETIS
-MCU_SERIES = K20x
-
-# Linker script to use
-# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
-#   or <this_dir>/ld/
-# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
-# - LDSCRIPT =
-#   - MKL26Z64 for Teensy LC
-#   - MK20DX128 for Teensy 3.0
-#   - MK20DX256 for Teensy 3.1 and 3.2
-MCU_LDSCRIPT = MK20DX256
-
-# Startup code to use
-#  - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
-# - STARTUP =
-#   - kl2x for Teensy LC
-#   - k20x5 for Teensy 3.0
-#   - k20x7 for Teensy 3.1 and 3.2
-MCU_STARTUP = k20x7
-
-# Board: it should exist either in <chibios>/os/hal/boards/
-#  or <this_dir>/boards
-# - BOARD =
-#   - PJRC_TEENSY_LC for Teensy LC
-#   - PJRC_TEENSY_3 for Teensy 3.0
-#   - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
-BOARD = PJRC_TEENSY_3_1
-
-# Cortex version
-# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
-MCU  = cortex-m4
-
-# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
-# I.e. 6 for Teensy LC; 7 for Teensy 3.x
-ARMV = 7
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration
-## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
-MOUSEKEY_ENABLE = yes	# Mouse keys
-EXTRAKEY_ENABLE = yes	# Audio control and System control
-CONSOLE_ENABLE = yes	# Console for debug
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE = yes	    # USB Nkey Rollover
-
-include $(TMK_DIR)/tool/chibios/common.mk
-include $(TMK_DIR)/tool/chibios/chibios.mk

keyboards/chimera_ortho/info.json

@@ -0,0 +1,247 @@
+{
+  "keyboard_name": "",
+  "manufacturer": "",
+  "identifier": "",
+  "url": "",
+  "maintainer": "qmk",
+  "processor": "",
+  "bootloader": "",
+  "width": 15.5,
+  "height": 4.25,
+  "layouts": {
+    "KEYMAP": {
+      "layout": [
+        {
+          "label": "Esc",
+          "x": 0,
+          "y": 0
+        },
+        {
+          "label": "Q",
+          "x": 1,
+          "y": 0
+        },
+        {
+          "label": "W",
+          "x": 2,
+          "y": 0
+        },
+        {
+          "label": "E",
+          "x": 3,
+          "y": 0
+        },
+        {
+          "label": "R",
+          "x": 4,
+          "y": 0
+        },
+        {
+          "label": "T",
+          "x": 5,
+          "y": 0
+        },
+        {
+          "label": "{",
+          "x": 6,
+          "y": 0
+        },
+        {
+          "label": "}",
+          "x": 8.5,
+          "y": 0
+        },
+        {
+          "label": "Y",
+          "x": 9.5,
+          "y": 0
+        },
+        {
+          "label": "U",
+          "x": 10.5,
+          "y": 0
+        },
+        {
+          "label": "I",
+          "x": 11.5,
+          "y": 0
+        },
+        {
+          "label": "O",
+          "x": 12.5,
+          "y": 0
+        },
+        {
+          "label": "P",
+          "x": 13.5,
+          "y": 0
+        },
+        {
+          "label": "\"",
+          "x": 14.5,
+          "y": 0
+        },
+        {
+          "label": "Tab",
+          "x": 0,
+          "y": 1
+        },
+        {
+          "label": "A",
+          "x": 1,
+          "y": 1
+        },
+        {
+          "label": "S",
+          "x": 2,
+          "y": 1
+        },
+        {
+          "label": "D",
+          "x": 3,
+          "y": 1
+        },
+        {
+          "label": "F",
+          "x": 4,
+          "y": 1
+        },
+        {
+          "label": "G",
+          "x": 5,
+          "y": 1
+        },
+        {
+          "label": "-",
+          "x": 6,
+          "y": 1
+        },
+        {
+          "label": "1",
+          "x": 8.5,
+          "y": 1
+        },
+        {
+          "label": "H",
+          "x": 9.5,
+          "y": 1
+        },
+        {
+          "label": "J",
+          "x": 10.5,
+          "y": 1
+        },
+        {
+          "label": "K",
+          "x": 11.5,
+          "y": 1
+        },
+        {
+          "label": "L",
+          "x": 12.5,
+          "y": 1
+        },
+        {
+          "label": ";",
+          "x": 13.5,
+          "y": 1
+        },
+        {
+          "label": "Enter",
+          "x": 14.5,
+          "y": 1
+        },
+        {
+          "label": "(",
+          "x": 0,
+          "y": 2
+        },
+        {
+          "label": "Z",
+          "x": 1,
+          "y": 2
+        },
+        {
+          "label": "X",
+          "x": 2,
+          "y": 2
+        },
+        {
+          "label": "C",
+          "x": 3,
+          "y": 2
+        },
+        {
+          "label": "V",
+          "x": 4,
+          "y": 2
+        },
+        {
+          "label": "B",
+          "x": 5,
+          "y": 2
+        },
+        {
+          "label": "=",
+          "x": 6,
+          "y": 2
+        },
+        {
+          "label": "8",
+          "x": 8.5,
+          "y": 2
+        },
+        {
+          "label": "N",
+          "x": 9.5,
+          "y": 2
+        },
+        {
+          "label": "M",
+          "x": 10.5,
+          "y": 2
+        },
+        {
+          "label": ",",
+          "x": 11.5,
+          "y": 2
+        },
+        {
+          "label": ".",
+          "x": 12.5,
+          "y": 2
+        },
+        {
+          "label": "/",
+          "x": 13.5,
+          "y": 2
+        },
+        {
+          "label": ")",
+          "x": 14.5,
+          "y": 2
+        },
+        {
+          "label": "Num Layer",
+          "x": 4,
+          "y": 3.25
+        },
+        {
+          "label": "Back Space",
+          "x": 5,
+          "y": 3.25
+        },
+        {
+          "label": "Space",
+          "x": 9.5,
+          "y": 3.25
+        },
+        {
+          "label": "Symbol Layer",
+          "x": 10.5,
+          "y": 3.25
+        }
+      ]
+    }
+  }
+}

keyboards/clueboard/66/keymaps/bloodlvst/Makefile

@@ -1,2 +0,0 @@
-EXTRAKEY_ENABLE = yes
-COMMAND_ENABLE  = no

keyboards/clueboard/66/keymaps/mouse_keys/Makefile

@@ -1 +0,0 @@
-MOUSEKEY_ENABLE = yes

keyboards/clueboard/66/keymaps/mrscooty/Makefile

@@ -1,4 +0,0 @@
-
-MOUSEKEY_ENABLE = yes
-EXTRAKEY_ENABLE = yes
-

keyboards/clueboard/66/keymaps/serubin/Makefile

@@ -1,4 +0,0 @@
-
-MOUSEKEY_ENABLE = yes
-EXTRAKEY_ENABLE = yes
-

keyboards/clueboard/66/keymaps/tetris/Makefile

@@ -1 +0,0 @@
-SRC = tetris_text.c

keyboards/clueboard/66/keymaps/xyverz/Makefile

@@ -1,49 +0,0 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-#                Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-#               (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-#            have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-#             have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-#               (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-#                (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging,
-#              with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-#                   bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
-# Build Options
-#   change to "no" to disable the options, or define them in the makefile.mk in 
-#   the appropriate keymap folder that will get included automatically
-#
-RGBLIGHT_ENABLE = yes        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/eagle_viper/eagle_viper.c

@@ -0,0 +1 @@
+#include "eagle_viper.h"

keyboards/eagle_viper/eagle_viper.h

@@ -0,0 +1,10 @@
+#ifndef EAGLE_VIPER_H
+#define EAGLE_VIPER_H
+
+#include "quantum.h"
+
+#ifdef KEYBOARD_eagle_viper_v2
+    #include "v2.h"
+#endif
+
+#endif

keyboards/eagle_viper/info.json

@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "Eagle/Viper", 
+    "manufacturer": "Duck", 
+    "processor": "atmega32u4", 
+    "bootloader": "atmel-dfu", 
+    "width": 15, 
+    "height": 5, 
+    "layouts": {
+        "KEYMAP": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0.5, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":14, "y":1, "w":1.5}, {"x":0.75, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":14, "y":2, "w":2.25}, {"x":1.25, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":13, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":0.25, "y":4, "w":1.25}, {"x":1.5, "y":4, "w":1.25}, {"x":2.75, "y":4, "w":1.25}, {"x":9, "y":4, "w":6.25}, {"x":10.25, "y":4, "w":1.25}, {"x":11.5, "y":4, "w":1.25}, {"x":12.75, "y":4, "w":1.25}, {"x":14, "y":4, "w":1.25}]
+        }
+    }
+}

keyboards/eagle_viper/readme.md

@@ -0,0 +1,12 @@
+# Duck Eagle/Viper
+
+Non official firmware for custom Korean keyboard with 60% key layout made by Duck.
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+Newest version is the [Eagle/Viper V2](http://duck0113.tistory.com/127)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make eagle_viper/v2:default
+

keyboards/eagle_viper/rules.mk

@@ -0,0 +1 @@
+DEFAULT_FOLDER = eagle_viper/v2

keyboards/eagle_viper/v2/config.h

@@ -0,0 +1,54 @@
+/*
+Copyright 2017 MechMerlin <mechmerlin@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6050
+#define DEVICE_VER      0x0104
+#define MANUFACTURER    Duck
+#define PRODUCT         Eagle/Viper V2
+#define DESCRIPTION     60% Korean custom keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+#define DIODE_DIRECTION COL2ROW
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCING_DELAY 5
+
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#define RGBLIGHT_ANIMATIONS
+#define RGB_DI_PIN D6
+#define RGBLED_NUM 17
+
+#define TAPPING_TERM 200
+
+#endif

keyboards/eagle_viper/v2/indicator_leds.c

@@ -0,0 +1,89 @@
+/*
+Copyright 2017 MechMerlin <mechmerlin@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <avr/interrupt.h>
+#include <avr/io.h>
+#include <stdbool.h>
+#include <util/delay.h>
+#include "indicator_leds.h"
+
+#define RES 6000
+
+#define LED_T1H	600
+#define LED_T1L 650
+#define LED_T0H 250
+#define LED_T0L 1000
+
+#define NS_PER_SEC (1000000000L)
+#define CYCLES_PER_SEC (F_CPU)
+#define NS_PER_CYCLE (NS_PER_SEC / CYCLES_PER_SEC)
+#define NS_TO_CYCLES(n) ((n) / NS_PER_CYCLE)
+
+void send_bit_d4(bool bitVal) {
+  if(bitVal) {
+    asm volatile (
+        "sbi %[port], %[bit] \n\t"
+        ".rept %[onCycles] \n\t"
+        "nop \n\t"
+        ".endr \n\t"
+        "cbi %[port], %[bit] \n\t"
+        ".rept %[offCycles] \n\t"
+        "nop \n\t"
+        ".endr \n\t"
+        ::
+        [port]      "I" (_SFR_IO_ADDR(PORTD)),
+        [bit]       "I" (4),
+        [onCycles]  "I" (NS_TO_CYCLES(LED_T1H) - 2),
+        [offCycles] "I" (NS_TO_CYCLES(LED_T1L) - 2));
+  } else {
+    asm volatile (
+        "sbi %[port], %[bit] \n\t"
+        ".rept %[onCycles] \n\t"
+        "nop \n\t"
+        ".endr \n\t"
+        "cbi %[port], %[bit] \n\t"
+        ".rept %[offCycles] \n\t"
+        "nop \n\t"
+        ".endr \n\t"
+        ::
+        [port]      "I" (_SFR_IO_ADDR(PORTD)),
+        [bit]       "I" (4),
+        [onCycles]  "I" (NS_TO_CYCLES(LED_T0H) - 2),
+        [offCycles] "I" (NS_TO_CYCLES(LED_T0L) - 2));
+  }
+}
+
+void show(void) {
+  _delay_us((RES / 1000UL) + 1);
+}
+
+void send_value(uint8_t byte) {
+  for(uint8_t b = 0; b < 8; b++) {
+    send_bit_d4(byte & 0b10000000);
+    byte <<= 1;
+  }
+}
+
+// Send the LED indicators to the WS2811S chips
+void indicator_leds_set(bool leds[8]) {
+  uint8_t led_cnt;
+
+  cli();
+  for(led_cnt = 0; led_cnt < 8; led_cnt++)
+    send_value(leds[led_cnt] ? 255 : 0);
+  sei();
+  show();
+}

keyboards/eagle_viper/v2/indicator_leds.h

@@ -0,0 +1,2 @@
+void indicator_leds_set(bool leds[8]);
+void show(void);

keyboards/eagle_viper/v2/keymaps/default/keymap.c

@@ -0,0 +1,37 @@
+/* Copyright 2017 MechMerlin <mechmerlin@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "eagle_viper.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* layer 0: qwerty */
+    [0] = KEYMAP(\
+        KC_GRV,  KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_NO, KC_BSPC,
+        KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+        KC_CAPS, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT, KC_NO,   KC_ENT,
+        KC_LSFT, KC_NO,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_NO,
+        KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC,                                  MO(1),   KC_NO,   KC_RALT, KC_RGUI, KC_RCTL),
+
+    [1] = KEYMAP(\
+        KC_TRNS, RGB_TOG, RGB_MOD, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+        };
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE;
+};

keyboards/eagle_viper/v2/keymaps/default/readme.md

@@ -0,0 +1,10 @@
+# Default Eagle Layout
+
+This is the default implement layout for Duck Eagle V2.
+
+![Duck Eagle V2 Default Layout](https://imgur.com/mWBY3Dc.png)
+
+
+## Features
+
+* Default QWERTY layer

keyboards/eagle_viper/v2/keymaps/mechmerlin/keymap.c

@@ -0,0 +1,44 @@
+/* Copyright 2017 MechMerlin <mechmerlin@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "eagle_viper.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* layer 0: qwerty */
+    [0] = KEYMAP(\
+        KC_GESC, KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_NO, KC_BSPC,
+        KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSLS,
+        KC_LCTL, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT, KC_NO,   KC_ENT,
+        KC_LSFT, KC_NO,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_NO,
+        KC_LCTL, KC_LGUI, KC_LALT,                KC_SPC,                                  MO(1),   KC_NO,   KC_RALT, KC_RGUI, KC_RCTL),
+
+    [1] = KEYMAP(\
+        KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  KC_TRNS, KC_DEL,
+        RGB_TOG, RGB_MOD, RGB_VAI, KC_TRNS, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_TRNS, KC_TRNS,
+        KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_END, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_PGDN, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,                TG(2),                                 KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+    [2] = KEYMAP(\
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS, KC_NO,   KC_LEFT, KC_DOWN, KC_RIGHT),
+        };
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE;
+};

keyboards/eagle_viper/v2/keymaps/mechmerlin/readme.md

@@ -0,0 +1,15 @@
+MechMerlin's Duck Eagle V2 Layout
+======================
+
+This is the preferred 60% layout used by u/merlin36, host of the MechMerlin YouTube channel.
+
+![Duck Eagle V2 Layout](https://imgur.com/FRcsmJc.png)
+
+## Keymap Notes
+- Highly influenced by the KBP V60 and WKL B.Face standard layouts
+- Does not support any form of inswitch lighting as Merlin hates them.
+- Arrow toggle switch is FN + Space
+- Reset is FN + R
+
+### Build
+To build this keymap, simply run `make eagle_viper/v2:mechmerlin` from the qmk_firmware directory.

keyboards/eagle_viper/v2/keymaps/profanum429/keymap.c

@@ -0,0 +1,40 @@
+/* Copyright 2017 MechMerlin <mechmerlin@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "eagle_viper.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* layer 0: qwerty */
+    [0] = KEYMAP(\
+        KC_ESC,  KC_1,    KC_2,   KC_3,   KC_4,   KC_5,   KC_6,   KC_7,   KC_8,   KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV,
+        KC_TAB,  KC_Q,    KC_W,   KC_E,   KC_R,   KC_T,   KC_Y,   KC_U,   KC_I,   KC_O,    KC_P,    KC_LBRC, KC_RBRC,          KC_BSPC,
+        KC_LCTL, KC_A,    KC_S,   KC_D,   KC_F,   KC_G,   KC_H,   KC_J,   KC_K,   KC_L,    KC_SCLN, KC_QUOT, KC_NO,            KC_ENT,
+        KC_LSFT, KC_NO,   KC_Z,   KC_X,   KC_C,   KC_V,   KC_B,   KC_N,   KC_M,   KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, MO(1),
+        KC_NO,   KC_LGUI, KC_LALT,                KC_SPC,                                  KC_NO,   KC_NO,   KC_RALT, KC_RGUI, KC_NO),
+ 
+    [1] = KEYMAP(\
+        KC_TRNS, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,   KC_F11,   KC_F12,  KC_INS, KC_DEL,
+        KC_CAPS, RGB_TOG, RGB_MOD, RGB_VAI, RESET,   KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS,  KC_UP,    KC_TRNS, KC_BSPC,
+        KC_TRNS, KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT,  KC_RIGHT, KC_TRNS, KC_ENT,
+        KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PPLS, KC_PMNS, KC_END,  KC_PGDN,  KC_DOWN,  KC_TRNS, KC_TRNS,
+        KC_TRNS, KC_TRNS, KC_TRNS,          KC_TRNS,          KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+        };
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  return MACRO_NONE;
+};
+
+
+

keyboards/eagle_viper/v2/keymaps/profanum429/readme.md

@@ -0,0 +1,5 @@
+# Profanum429 Duck Viper V2 Layout
+TODO
+
+## Features
+TODO

keyboards/eagle_viper/v2/matrix.c

@@ -0,0 +1,266 @@
+/*
+Copyright 2017 MechMerlin <mechmerlin@gmail.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include <util/delay.h>
+#include <avr/io.h>
+#include <stdio.h>
+#include "matrix.h"
+#include "util.h"
+#include "print.h"
+#include "debug.h"
+
+static uint8_t debouncing = DEBOUNCING_DELAY;
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t matrix[MATRIX_ROWS];
+static matrix_row_t matrix_debouncing[MATRIX_ROWS];
+
+static uint8_t read_rows(uint8_t col);
+static void init_rows(void);
+static void unselect_cols(void);
+static void select_col(uint8_t col);
+
+__attribute__ ((weak))
+void matrix_init_quantum(void) {
+    matrix_init_kb();
+}
+
+__attribute__ ((weak))
+void matrix_scan_quantum(void) {
+    matrix_scan_kb();
+}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+void backlight_init_ports(void)
+{
+  DDRD  |=  0b11010000;
+  PORTD &= ~0b01010000;
+  PORTD |=  0b10000000;
+  DDRB  |=  0b00011111;
+  PORTB &= ~0b00001110;
+  PORTB |=  0b00010001;
+  DDRE  |=  0b01000000;
+  PORTE &= ~0b01000000;
+}
+
+void matrix_init(void) {
+  backlight_init_ports();
+  unselect_cols();
+  init_rows();
+
+  for (uint8_t i=0; i < MATRIX_ROWS; i++)  {
+    matrix[i] = 0;
+    matrix_debouncing[i] = 0;
+  }
+
+  matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void) {
+  for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+    select_col(col);
+    _delay_us(3);
+
+    uint8_t rows = read_rows(col);
+
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+      bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
+      bool curr_bit = rows & (1<<row);
+      if (prev_bit != curr_bit) {
+        matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
+        debouncing = DEBOUNCING_DELAY;
+      }
+    }
+    unselect_cols();
+  }
+
+  if (debouncing) {
+    if (--debouncing) {
+      _delay_ms(1);
+    } else {
+      for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        matrix[i] = matrix_debouncing[i];
+      }
+    }
+  }
+
+  matrix_scan_quantum();
+  return 1;
+}
+
+inline matrix_row_t matrix_get_row(uint8_t row) {
+  return matrix[row];
+}
+
+void matrix_print(void) {
+  print("\nr/c 0123456789ABCDEF\n");
+  for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+    xprintf("%02X: %032lb\n", row, bitrev32(matrix_get_row(row)));
+  }
+}
+
+/* Row pin configuration
+ * row: 0    1    2    3    4    5
+ * pin: PB7  PD0  PD1  PD2  PD3  PD5
+ *
+ * Esc uses its own pin PE2
+ */
+static void init_rows(void) {
+    DDRD  &= ~0b00101111;
+    PORTD &= ~0b00101111;
+
+    DDRB  &= ~0b10000000;
+    PORTB &= ~0b10000000;
+
+    DDRE  &= ~0b00000100;
+    PORTE |=  0b00000100;
+}
+
+static uint8_t read_rows(uint8_t col) {
+
+    return (PIND&(1<<0) ? (1<<0) : 0) |
+            (PIND&(1<<1) ? (1<<1) : 0) |
+            (PIND&(1<<2) ? (1<<2) : 0) |
+            (PIND&(1<<3) ? (1<<3) : 0) |
+            (PIND&(1<<5) ? (1<<4) : 0) |
+            (PINB&(1<<7) ? (1<<5) : 0) |
+            (col==0 ? ((PINE&(1<<2) ? 0 : (1<<2))) : 0);
+    
+}
+
+uint8_t read_fwkey(void)
+{
+  return PINE&(1<<2) ? 0 : (1<<2);
+}
+
+/* Columns 0 - 15
+ * These columns uses two 74HC237D 3 to 8 bit demultiplexers.
+ * col / pin:    PC6  PB6  PF0  PF1  PC7
+ * 0:             1    0    0    0    0
+ * 1:             1    0    1    0    0
+ * 2:             1    0    0    1    0
+ * 3:             1    0    1    1    0
+ * 4:             1    0    0    0    1
+ * 5:             1    0    1    0    1
+ * 6:             1    0    0    1    1
+ * 7:             1    0    1    1    1
+ * 8:             0    1    0    0    0
+ * 9:             0    1    1    0    0
+ * 10:            0    1    0    1    0
+ * 11:            0    1    1    1    0
+ * 12:            0    1    0    0    1
+ * 13:            0    1    1    0    1
+ * 14:            0    1    0    1    1
+ * 15:            0    1    1    1    1
+ *
+ */
+static void unselect_cols(void) {
+  DDRB  |=  0b01000000;
+  PORTB &= ~0b01000000;
+
+  DDRC  |=  0b11000000;
+  PORTC &= ~0b11000000;
+
+  DDRF  |=  0b00000011;
+  PORTF &= ~0b00000011;
+}
+
+static void select_col(uint8_t col) {
+ 
+   switch (col) {
+        case 0:
+            PORTC |= 0b01000000;
+            break;
+        case 1:
+            PORTC |= 0b01000000;
+            PORTF |= 0b00000001;
+            break;
+        case 2:
+            PORTC |= 0b01000000;
+            PORTF |= 0b00000010;
+            break;
+        case 3:
+            PORTC |= 0b01000000;
+            PORTF |= 0b00000011;
+            break;
+        case 4:
+            PORTC |= 0b11000000;
+            break;
+        case 5:
+            PORTC |= 0b11000000;
+            PORTF |= 0b00000001;
+            break;
+        case 6:
+            PORTC |= 0b11000000;
+            PORTF |= 0b00000010;
+            break;
+        case 7:
+            PORTC |= 0b11000000;
+            PORTF |= 0b00000011;
+            break;
+        case 8:
+            PORTB |= 0b01000000;
+            break;
+        case 9:
+            PORTB |= 0b01000000;
+            PORTF |= 0b00000001;
+            break;
+        case 10:
+            PORTB |= 0b01000000;
+            PORTF |= 0b00000010;
+            break;
+        case 11:
+            PORTB |= 0b01000000;
+            PORTF |= 0b00000011;
+            break;
+        case 12:
+            PORTB |= 0b01000000;
+            PORTC |= 0b10000000;
+            break;
+        case 13:
+            PORTB |= 0b01000000;
+            PORTF |= 0b00000001;
+            PORTC |= 0b10000000;
+            break;
+        case 14:
+            PORTB |= 0b01000000;
+            PORTF |= 0b00000010;
+            PORTC |= 0b10000000;
+            break;
+        case 15:
+            PORTB |= 0b01000000;
+            PORTF |= 0b00000011;
+            PORTC |= 0b10000000;
+            break;
+    }
+}

keyboards/eagle_viper/v2/readme.md

@@ -0,0 +1,30 @@
+# Duck Eagle/Viper V2
+
+Non official firmware for custom Korean keyboard with 60% key layout made by Duck.  
+Group buy was run November 2016 via [geekhack](https://geekhack.org/index.php?topic=86087.0) with 100 keyboards total. 
+
+Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)  
+Hardware Supported: Duck Eagle/Viper PCB Ver 2.0, Atmega32u4  
+Hardware Availability: Wait until GB of the next revision
+
+Make example for this keyboard (after setting up your build environment):
+
+    make eagle_viper/v2:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+## Hardware Notes
+
+The Duck Eagle/Viper V2 PCB consists of:
+
+### Microchips
+2 74HC237D 3-to-8 line decoders
+1 Atmega32u4 microcontroller
+2 WS2811 LED controller
+
+## Notes
+Thanks to Ralf Schmitt for previous implementations in his [TMK fork](https://github.com/xauser/tmk_keyboard/tree/xauser/) and few helping words.
+
+Based heavily on Rasmus Schults [Duck Lightsaver QMK Port](https://github.com/qmk/qmk_firmware/tree/master/keyboards/lightsaver)
+
+Special thanks to profanum429 for debugging help and contributions to support the Viper and LED indicators. 

keyboards/eagle_viper/v2/rules.mk

@@ -0,0 +1,72 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+#   Teensy halfKay   512
+#   Teensy++ halfKay 1024
+#   Atmel DFU loader 4096
+#   LUFA bootloader  4096
+#   USBaspLoader     2048
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE ?= no       # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= no        # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes       # Audio control and System control(+450)
+CONSOLE_ENABLE ?= no         # Console for debug(+400)
+COMMAND_ENABLE ?= yes        # Commands for debug and configuration
+# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE ?= no       # Breathing sleep LED during USB suspend
+# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE ?= yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE ?= yes      # Enable keyboard backlight functionality on B7 by default
+MIDI_ENABLE ?= no            # MIDI support (+2400 to 4200, depending on config)
+UNICODE_ENABLE ?= no         # Unicode
+BLUETOOTH_ENABLE ?= no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE ?= no           # Audio output on port C6
+FAUXCLICKY_ENABLE ?= no      # Use buzzer to emulate clicky switches
+RGBLIGHT_ENABLE = yes
+
+CUSTOM_MATRIX = yes
+SRC += indicator_leds.c \
+			 matrix.c

keyboards/eagle_viper/v2/v2.c

@@ -0,0 +1,65 @@
+/* Copyright 2017 MechMerlin <mechmerlin@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "v2.h"
+#include "indicator_leds.h"
+
+enum BACKLIGHT_AREAS {
+  BACKLIGHT_ALPHAS   = 0b00000010,
+  BACKLIGHT_MODNUM   = 0b00001000
+};
+
+void backlight_set(uint8_t level) {
+  switch(level) {
+  case 0:
+    PORTB |= BACKLIGHT_ALPHAS;
+    PORTB |= BACKLIGHT_MODNUM;
+  break;
+  case 1:
+    PORTB &= ~BACKLIGHT_ALPHAS;
+    PORTB |= BACKLIGHT_MODNUM;
+  break;
+  case 2:
+    PORTB |= BACKLIGHT_ALPHAS;
+    PORTB &= ~BACKLIGHT_MODNUM;
+  break;
+  case 3:
+    PORTB &= ~BACKLIGHT_ALPHAS;
+    PORTB &= ~BACKLIGHT_MODNUM;
+  break;
+  }
+}
+
+// Port from backlight_update_state
+void led_set_kb(uint8_t usb_led) {
+    bool status[8] = {
+    host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK), /* LED 3 */
+    host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK),   /* LED 2 */
+    host_keyboard_leds() & (1<<USB_LED_NUM_LOCK),    /* LED 1 */
+
+    layer_state & (1<<2),                            /* LED 6 */
+    layer_state & (1<<1),                            /* LED 5 */
+    layer_state & (1<<0) ? 0: 1,                     /* LED 4 */
+
+    layer_state & (1<<5),                            /* LED 8 */
+    layer_state & (1<<4)                             /* LED 7 */
+  };
+
+  indicator_leds_set(status);
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+  return process_record_user(keycode, record);
+}

keyboards/eagle_viper/v2/v2.h

@@ -0,0 +1,34 @@
+/* Copyright 2017 MechMerlin <mechmerlin@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef V2_H
+#define V2_H
+
+#include "../eagle_viper.h"
+
+#define KEYMAP( \
+    K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4N, K4O, \
+    K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M,      K3O, \
+    K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2M,      K2O, \
+    K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K,      K1M, K1N, K1O, \
+    K0A, K0B, K0C,                               K0J, K0K, K0L, K0M, K0N, K0O \
+) { \
+  { K4A, K4B, K4C, K4D,   K4E,   K4F,   K4G,   K4H,   K4I,   K4J,   K4K, K4L,   K4M, K4N,   K4O,   }, \
+  { K3A, K3B, K3C, K3D,   K3E,   K3F,   K3G,   K3H,   K3I,   K3J,   K3K, K3L,   K3M, KC_NO, K3O,   }, \
+  { K2A, K2B, K2C, K2D,   K2E,   K2F,   K2G,   K2H,   K2I,   K2J,   K2K, K2L,   K2M, KC_NO, K2O,   }, \
+  { K1A, K1B, K1C, K1D,   K1E,   K1F,   K1G,   K1H,   K1I,   K1J,   K1K, KC_NO, K1M, K1N,   K1O,   }, \
+  { K0A, K0B, K0C, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K0J,   KC_NO, K0K, K0L,   K0M, K0N,   K0O    }  \
+}
+#endif

keyboards/gh60/info.json

@@ -1,9 +1,9 @@
 {
     "keyboard_name": "GH60", 
     "identifier": "FEED:6060:0001", 
-    "layout": {
+    "layouts": {
         "LAYOUT_60_ansi": {
-            "layout": [{"x":0, "y":0, "label":"~"}, {"x":1, "y":0, "label":"!"}, {"x":2, "y":0, "label":"@"}, {"x":3, "y":0, "label":"#"}, {"x":4, "y":0, "label":"$"}, {"x":5, "y":0, "label":"%"}, {"x":6, "y":0, "label":"^"}, {"x":7, "y":0, "label":"&"}, {"x":8, "y":0, "label":"*"}, {"x":9, "y":0, "label":"("}, {"x":10, "y":0, "label":")"}, {"x":11, "y":0, "label":"_"}, {"x":12, "y":0, "label":"+"}, {"x":14, "y":0, "label":"Backspace", "w":2}, {"x":0.5, "y":1, "label":"Tab", "w":1.5}, {"x":1.5, "y":1, "label":"Q"}, {"x":2.5, "y":1, "label":"W"}, {"x":3.5, "y":1, "label":"E"}, {"x":4.5, "y":1, "label":"R"}, {"x":5.5, "y":1, "label":"T"}, {"x":6.5, "y":1, "label":"Y"}, {"x":7.5, "y":1, "label":"U"}, {"x":8.5, "y":1, "label":"I"}, {"x":9.5, "y":1, "label":"O"}, {"x":10.5, "y":1, "label":"P"}, {"x":11.5, "y":1, "label":"{"}, {"x":12.5, "y":1, "label":"}"}, {"x":14, "y":1, "label":"|", "w":1.5}, {"x":0.75, "y":2, "label":"Caps Lock", "w":1.75}, {"x":1.75, "y":2, "label":"A"}, {"x":2.75, "y":2, "label":"S"}, {"x":3.75, "y":2, "label":"D"}, {"x":4.75, "y":2, "label":"F"}, {"x":5.75, "y":2, "label":"G"}, {"x":6.75, "y":2, "label":"H"}, {"x":7.75, "y":2, "label":"J"}, {"x":8.75, "y":2, "label":"K"}, {"x":9.75, "y":2, "label":"L"}, {"x":10.75, "y":2, "label":":"}, {"x":11.75, "y":2, "label":"\""}, {"x":14, "y":2, "label":"Enter", "w":2.25}, {"x":1.25, "y":3, "label":"Shift", "w":2.25}, {"x":2.25, "y":3, "label":"Z"}, {"x":3.25, "y":3, "label":"X"}, {"x":4.25, "y":3, "label":"C"}, {"x":5.25, "y":3, "label":"V"}, {"x":6.25, "y":3, "label":"B"}, {"x":7.25, "y":3, "label":"N"}, {"x":8.25, "y":3, "label":"M"}, {"x":9.25, "y":3, "label":"<"}, {"x":10.25, "y":3, "label":">"}, {"x":11.25, "y":3, "label":"?"}, {"x":14, "y":3, "label":"Shift", "w":2.75}, {"x":0.25, "y":4, "label":"Ctrl", "w":1.25}, {"x":1.5, "y":4, "label":"Win", "w":1.25}, {"x":2.75, "y":4, "label":"Alt", "w":1.25}, {"x":9, "y":4, "w":6.25}, {"x":10.25, "y":4, "label":"Alt", "w":1.25}, {"x":11.5, "y":4, "label":"Win", "w":1.25}, {"x":12.75, "y":4, "label":"Menu", "w":1.25}, {"x":14, "y":4, "label":"Ctrl", "w":1.25}]
+            "layout": [{"x":0, "y":0, "label":"~"}, {"x":1, "y":0, "label":"!"}, {"x":2, "y":0, "label":"@"}, {"x":3, "y":0, "label":"#"}, {"x":4, "y":0, "label":"$"}, {"x":5, "y":0, "label":"%"}, {"x":6, "y":0, "label":"^"}, {"x":7, "y":0, "label":"&"}, {"x":8, "y":0, "label":"*"}, {"x":9, "y":0, "label":"("}, {"x":10, "y":0, "label":")"}, {"x":11, "y":0, "label":"_"}, {"x":12, "y":0, "label":"+"}, {"x":13, "y":0, "label":"Backspace", "w":2}, {"x":0, "y":1, "label":"Tab", "w":1.5}, {"x":1.5, "y":1, "label":"Q"}, {"x":2.5, "y":1, "label":"W"}, {"x":3.5, "y":1, "label":"E"}, {"x":4.5, "y":1, "label":"R"}, {"x":5.5, "y":1, "label":"T"}, {"x":6.5, "y":1, "label":"Y"}, {"x":7.5, "y":1, "label":"U"}, {"x":8.5, "y":1, "label":"I"}, {"x":9.5, "y":1, "label":"O"}, {"x":10.5, "y":1, "label":"P"}, {"x":11.5, "y":1, "label":"{"}, {"x":12.5, "y":1, "label":"}"}, {"x":13.5, "y":1, "label":"|", "w":1.5}, {"x":0, "y":2, "label":"Caps Lock", "w":1.75}, {"x":1.75, "y":2, "label":"A"}, {"x":2.75, "y":2, "label":"S"}, {"x":3.75, "y":2, "label":"D"}, {"x":4.75, "y":2, "label":"F"}, {"x":5.75, "y":2, "label":"G"}, {"x":6.75, "y":2, "label":"H"}, {"x":7.75, "y":2, "label":"J"}, {"x":8.75, "y":2, "label":"K"}, {"x":9.75, "y":2, "label":"L"}, {"x":10.75, "y":2, "label":":"}, {"x":11.75, "y":2, "label":"\""}, {"x":12.75, "y":2, "label":"Enter", "w":2.25}, {"x":0, "y":3, "label":"Shift", "w":2.25}, {"x":2.25, "y":3, "label":"Z"}, {"x":3.25, "y":3, "label":"X"}, {"x":4.25, "y":3, "label":"C"}, {"x":5.25, "y":3, "label":"V"}, {"x":6.25, "y":3, "label":"B"}, {"x":7.25, "y":3, "label":"N"}, {"x":8.25, "y":3, "label":"M"}, {"x":9.25, "y":3, "label":"<"}, {"x":10.25, "y":3, "label":">"}, {"x":11.25, "y":3, "label":"?"}, {"x":12.25, "y":3, "label":"Shift", "w":2.75}, {"x":0, "y":4, "label":"Ctrl", "w":1.25}, {"x":1.25, "y":4, "label":"Win", "w":1.25}, {"x":2.5, "y":4, "label":"Alt", "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "label":"Alt", "w":1.25}, {"x":11.25, "y":4, "label":"Win", "w":1.25}, {"x":12.5, "y":4, "label":"Menu", "w":1.25}, {"x":13.75, "y":4, "label":"Ctrl", "w":1.25}]
         }
     }, 
     "maintainer": "qmk", 

keyboards/gherkin/keymaps/wanleg/config.h

@@ -0,0 +1,61 @@
+#ifndef CONFIG_H
+#define CONFIG_H
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    40 Percent Club
+#define PRODUCT         Gherkin
+#define DESCRIPTION     A 30 key ortholinear keyboard
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 6
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { F7, B1, B3, B2, B6 }
+#define MATRIX_COL_PINS { B4, E6, D7, C6, D4, D0 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B5
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+/*tap dance definition */
+#define TAPPING_TERM 200
+
+
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 0
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#endif

keyboards/gherkin/keymaps/wanleg/keymap.c

@@ -0,0 +1,221 @@
+/* Copyright 2017 Brian Fong
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "gherkin.h"
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _QW 0
+#define DIR 1
+#define NUM 2
+#define ETC 3
+
+
+/////////////// TAP DANCE SECTION START ///////////////
+//Tap Dance Declarations (list of my tap dance configurations)
+enum {
+  TD_SFT_CAPS = 0
+  ,TD_Q_ESC
+  ,ENT_TAP_DANCE
+  ,DEL_TAP_DANCE
+};
+
+///// QUAD FUNCTION TAP DANCE GENERAL SETUP SECTION START /////
+///// (no need to edit this section) /////
+//Enums used to clearly convey the state of the tap dance
+enum {
+  SINGLE_TAP = 1,
+  SINGLE_HOLD = 2,
+  DOUBLE_TAP = 3,
+  DOUBLE_HOLD = 4,
+  DOUBLE_SINGLE_TAP = 5 //send SINGLE_TAP twice - NOT DOUBLE_TAP
+  // Add more enums here if you want for triple, quadruple, etc.
+};
+
+typedef struct {
+  bool is_press_action;
+  int state;
+} tap;
+
+int cur_dance (qk_tap_dance_state_t *state) {
+  if (state->count == 1) {
+    //If count = 1, and it has been interrupted - it doesn't matter if it is pressed or not: Send SINGLE_TAP
+    if (state->interrupted || !state->pressed) return SINGLE_TAP;
+    if (state->interrupted) return SINGLE_TAP;
+    else return SINGLE_HOLD;
+  }
+  //If count = 2, and it has been interrupted - assume that user is trying to type the letter associated
+  //with single tap.
+  else if (state->count == 2) {
+    if (state->interrupted) return DOUBLE_SINGLE_TAP;
+    else if (state->pressed) return DOUBLE_HOLD;
+    else return DOUBLE_TAP;
+  }
+  else return 6; //magic number. At some point this method will expand to work for more presses
+}
+///// QUAD FUNCTION TAP DANCE GENERAL SETUP SECTION END /////
+///// QUAD FUNCTION TAP DANCE PERSONALIZATION SECTION START /////
+//instantialize an instance of 'tap' for the 'ENT' tap dance.
+static tap ENTtap_state = {
+  .is_press_action = true,
+  .state = 0
+};
+
+void ENT_finished (qk_tap_dance_state_t *state, void *user_data) {
+  ENTtap_state.state = cur_dance(state);
+  switch (ENTtap_state.state) {
+    case SINGLE_TAP: register_code(KC_SPC); break;
+    case SINGLE_HOLD: register_code(KC_LSFT); break;
+    case DOUBLE_TAP: register_code(KC_ENT); break;
+    case DOUBLE_HOLD: register_code(KC_NO); break; // setting double hold to do nothing (change this if you want)
+    case DOUBLE_SINGLE_TAP: register_code(KC_SPC); unregister_code(KC_SPC); register_code(KC_SPC);
+    //Last case is for fast typing. Assuming your key is `f`:
+    //For example, when typing the word `buffer`, and you want to make sure that you send `ff` and not `Esc`.
+    //In order to type `ff` when typing fast, the next character will have to be hit within the `TAPPING_TERM`, which by default is 200ms.
+  }
+}
+
+void ENT_reset (qk_tap_dance_state_t *state, void *user_data) {
+  switch (ENTtap_state.state) {
+    case SINGLE_TAP: unregister_code(KC_SPC); break;
+    case SINGLE_HOLD: unregister_code(KC_LSFT); break;
+    case DOUBLE_TAP: unregister_code(KC_ENT); break;
+    case DOUBLE_HOLD: unregister_code(KC_NO);
+    case DOUBLE_SINGLE_TAP: unregister_code(KC_SPC);
+  }
+  ENTtap_state.state = 0;
+}
+
+//instanalize an instance of 'tap' for the 'DEL' tap dance.
+static tap DELtap_state = {
+  .is_press_action = true,
+  .state = 0
+};
+
+void DEL_finished (qk_tap_dance_state_t *state, void *user_data) {
+  DELtap_state.state = cur_dance(state);
+  switch (DELtap_state.state) {
+    case SINGLE_TAP: register_code(KC_BSPC); break;
+    case SINGLE_HOLD: register_code(KC_LCTL); break;
+    case DOUBLE_TAP: register_code(KC_DEL); break;
+    case DOUBLE_HOLD: register_code(KC_NO); break;
+    case DOUBLE_SINGLE_TAP: register_code(KC_BSPC); unregister_code(KC_BSPC); register_code(KC_BSPC);
+  }
+}
+
+void DEL_reset (qk_tap_dance_state_t *state, void *user_data) {
+  switch (DELtap_state.state) {
+    case SINGLE_TAP: unregister_code(KC_BSPC); break;
+    case SINGLE_HOLD: unregister_code(KC_LCTL); break;
+    case DOUBLE_TAP: unregister_code(KC_DEL); break;
+    case DOUBLE_HOLD: unregister_code(KC_NO);
+    case DOUBLE_SINGLE_TAP: unregister_code(KC_BSPC);
+  }
+  DELtap_state.state = 0;
+}
+///// QUAD FUNCTION TAP DANCE PERSONALIZATION SECTION END /////
+
+//Tap Dance Definitions
+//THIS SECTION HAS TO BE AT THE END OF THE TAP DANCE SECTION
+qk_tap_dance_action_t tap_dance_actions[] = {
+  [TD_SFT_CAPS] = ACTION_TAP_DANCE_DOUBLE(KC_LSFT, KC_CAPS)
+// Other declarations would go here, separated by commas, if you have them
+ ,[TD_Q_ESC]  = ACTION_TAP_DANCE_DOUBLE(KC_Q, KC_ESC)
+ ,[ENT_TAP_DANCE] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, ENT_finished, ENT_reset)
+ ,[DEL_TAP_DANCE] = ACTION_TAP_DANCE_FN_ADVANCED(NULL, DEL_finished, DEL_reset)
+};
+
+//In Layer declaration, add tap dance item in place of a key code
+//TD(TD_SFT_CAPS)
+
+///////////// TAP DANCE SECTION END ///////////////
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+ /* Qwerty
+ * .-----------------------------------------------------------------------------------------.
+ * | Q//ESC | W      | E      | R      | T      | Y      | U      | I      | O      | P      |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | A      | S      | D      | F      | G      | H      | J      | K      | L      | ENTER  |
+ * |        |        |        |        |        |        |        |        |        |SFThold |
+ * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+ * | Z      | X      | C      | V/NUM  | B/ETC  | N      | M/DIR  | ,/GUI  | ./ALT  | BKSC   |
+ * | SFThold|        |        |        |        |        |        |        |        |CTRLhold|
+ * '-----------------------------------------------------------------------------------------'
+ */
+
+ [_QW] = KEYMAP( /* Qwerty*/
+   TD(TD_Q_ESC), KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,
+   KC_A,    KC_S,    KC_D,    KC_F,    KC_G, KC_H,    KC_J,    KC_K,    KC_L,   SFT_T(KC_SPC),
+   SFT_T(KC_Z),    KC_X,    KC_C,    LT(NUM, KC_V), LT(ETC, KC_B), KC_N, LT(DIR, KC_M), GUI_T(KC_COMM), ALT_T(KC_DOT), CTL_T(KC_BSPC)
+  ),
+
+
+//
+///*
+// *  Directional Modifiers
+// * .-----------------------------------------------------------------------------------------.
+// * | TAB    |   up   |        | INS    |  CTRL  | SHIFT  | PgUp   | HOME   |  -     |  =     |
+// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+// * | left   |  down  | right  | PrScr  | SHIFT  |  CTRL  | PgDn   | END    |  [     |  ]     |
+// * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+// * |        |        |        |        |        |        |        |        | ALT    |  /     |
+// * '-----------------------------------------------------------------------------------------'
+// */
+//
+[DIR] = KEYMAP( /* Directional Modifiers */
+  KC_TAB,  KC_UP,   KC_TRNS, KC_INS,  KC_LCTL, KC_RSFT, KC_PGUP, KC_HOME, KC_MINS, KC_EQL  ,
+  KC_LEFT, KC_DOWN, KC_RGHT, KC_PSCR, KC_LSFT, KC_RCTL, KC_PGDN, KC_END,  KC_LBRC, KC_RBRC ,
+  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_RALT, KC_SLSH
+),
+//
+// /*
+//  *  Numbers
+//  * .-----------------------------------------------------------------------------------------.
+//  * | F1     | F2     | F3     | F4     | F5     | F6     | F7     | F8     | F9     | F10    |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+//  * | 1      | 2      | 3      | 4      | 5      | 6      | 7      | 8      | 9      | 0      |
+//  * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+//  * | F11    | F12    |        |        |        | ENTER  | SHIFT  | GUI    | ./ALT  | BKSC   |
+//  * |        |        |        |        |        |        |        |        |        |CTRLhold|
+//  * '-----------------------------------------------------------------------------------------'
+//  */
+//
+[NUM] = KEYMAP ( /* Numbers */
+  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10  ,
+  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0    ,
+  KC_F11,  KC_F12,  KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT,  KC_RSFT, KC_RGUI, ALT_T(KC_DOT), CTL_T(KC_BSPC)
+),
+//
+//
+//  /*
+//   *  ETC
+//   * .-----------------------------------------------------------------------------------------.
+//   * |  `     |        |        |        |        |        |        |        |        |  \     |
+//   * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+//   * | CAPS   | P-Brk  |        |        |        |        |        |        |  ;     |  '     |
+//   * |--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
+//   * | SHIFT  |        |        |        |        | C-A-D  |        | GUI    |        |  DEL   |
+//   * '-----------------------------------------------------------------------------------------'
+//   */
+//
+[ETC] = KEYMAP( /* ETC */
+  KC_GRV,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS ,
+  KC_CAPS, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SCLN, KC_QUOT ,
+  KC_LSFT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, LALT(LCTL(KC_DEL)), KC_TRNS, KC_RGUI, KC_TRNS, KC_DEL
+ ),
+};

keyboards/gherkin/keymaps/wanleg/readme.md

@@ -0,0 +1,12 @@
+![Gherkin Wanleg Layout Image](https://i.imgur.com/RpN5N42.png)
+
+# Gherkin Wanleg Layout
+
+Here is the layout I came up with to preserve a standard QWERTY layout as much as possible, in as few layers as possible for a 30 key board.
+I originally set up a few Tap Dance keys, but eventually dropped most of them in favor of chorded versions, since in actual use, they tended to impede typing speed more than their (current) two-key versions.
+I've left them in my layout ready for use if anyone wants to try them out:
+Single tap - Double tap - Hold
+space - enter - shift
+backspace - delete - control
+shift - caps lock - XXXX
+KC_Q - escape - XXXX

keyboards/gherkin/keymaps/wanleg/rules.mk

@@ -0,0 +1,63 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded 
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = yes	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = no
+TAP_DANCE_ENABLE = yes		# Enable Tap Dance (comment if not being implemented)

keyboards/jc65/jc65.c

@@ -23,6 +23,14 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
 
 void led_set_kb(uint8_t usb_led) {
 	// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
+    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // output low
+        DDRB |= (1<<2);
+        PORTB &= ~(1<<2);
+    } else {
+        // Hi-Z
+        DDRB &= ~(1<<2);
+        PORTB &= ~(1<<2);
+    }
 	led_set_user(usb_led);
 }

keyboards/jc65/keymaps/coth/config.h

@@ -0,0 +1 @@
+#include "../../config.h"

keyboards/jc65/keymaps/coth/keymap.c

@@ -0,0 +1,25 @@
+#include "jc65.h"
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  [0] = KEYMAP(
+      KC_GESC, KC_1,    KC_2,   KC_3,     KC_4,     KC_5,     KC_6,    KC_7,  KC_8,    KC_9,    KC_0,    KC_MINS, KC_EQL,  KC_BSLS, KC_GRV, KC_INS,
+      KC_TAB,  KC_Q,    KC_W,   KC_E,     KC_R,     KC_T,     KC_Y,    KC_U,  KC_I,    KC_O,    KC_P,    KC_LBRC, KC_RBRC, KC_BSPC, KC_DEL,
+      KC_LCTL, KC_A,    KC_S,   KC_D,     KC_F,     KC_G,     KC_H,    KC_J,  KC_K,    KC_L,    KC_SCLN, KC_QUOT, KC_ENT,  KC_PGUP,
+      KC_LSFT, KC_NUBS, KC_Z,   KC_X,     KC_C,     KC_V,     KC_B,    KC_N,  KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, KC_UP,   KC_PGDN,
+      KC_LALT, KC_LCTL, KC_LGUI, KC_SPACE, KC_SPACE, KC_SPACE, MO(1),  KC_NO, MO(2),  KC_LEFT, KC_DOWN, KC_RGHT
+      ),
+  [1] = KEYMAP(
+      KC_GRV,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,    KC_F10,  KC_F11,   KC_F12,  KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_BTN2, KC_MS_U, KC_BTN1, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_UP,   KC_HOME,  KC_END,  KC_DEL,  KC_TRNS,
+      KC_CAPS, KC_MS_L, KC_MS_D, KC_MS_R, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP,   KC_LEFT,  KC_DOWN, KC_RGHT, KC_TRNS, KC_VOLU,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN,  KC_PGUP, KC_TRNS,  KC_TRNS, KC_PGUP, KC_VOLD,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME,  KC_PGDN, KC_END
+      ),
+  [2] = KEYMAP(
+      RGB_TOG, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, RGB_MOD, RGB_RMOD, BL_STEP, BL_TOGG, KC_TRNS, KC_TRNS, RESET,
+      KC_TRNS, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS,  RGB_TOG,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_INC,   KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, RGB_HUD, RGB_SAD, RGB_VAD, KC_TRNS,  RGB_HUD,  RGB_HUI, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC,   KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD,  RGB_VAI,  KC_TRNS, KC_TRNS, RGB_MOD, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+      KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS
+      ),
+};

keyboards/jc65/keymaps/coth/readme.md

@@ -0,0 +1,14 @@
+ChildoftheHorn's Keymap
+===
+ 
+Layer 1: "HHKB Mac" Split backspace, 6.25u space, caps is cntl
+
+Layer 2: V60++ with mouse controls on WASD
+
+Layer 3: RGB control on number row, LED controls, and Reset
+
+Keymap Maintainer: [Stacy Devino](https://github.com/childofthehorn)
+
+Difference from base layout: Primarily the HHKB-ness
+
+Intended usage: Daily driver for programming 

keyboards/jd45/keymaps/mjt/keymap.c

@@ -50,13 +50,13 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
             // action_function_tap may also handle this...
             if (record->event.pressed)
             {
-                breathing_speed_set(3);
+                breathing_period_set(3);
                 breathing_enable();
                 layer_on(1);
             }
             else
             {
-                breathing_speed_set(1);
+                breathing_period_set(1);
                 breathing_self_disable();
                 layer_off(1);
             }
@@ -64,13 +64,13 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
         case M_LAYER2:
             if (record->event.pressed)
             {
-                breathing_speed_set(2);
+                breathing_period_set(2);
                 breathing_pulse();
                 layer_on(2);
             }
             else
             {
-                breathing_speed_set(1);
+                breathing_period_set(1);
                 breathing_self_disable();
                 layer_off(2);
             }

keyboards/jj40/config.h

@@ -15,6 +15,8 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
+#include "config_common.h"
+
 #ifndef CONFIG_H
 #define CONFIG_H
 
@@ -39,6 +41,13 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define NO_UART 1
 
+/* RGB underglow */
+// The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards.
+// The same pin is used on the JJ40, at least.
+#define RGBLED_NUM 5
+#define RGB_DI_PIN E2
+#define RGBLIGHT_ANIMATIONS
+
 /* key combination for command */
 #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
 

keyboards/jj40/jj40.c

@@ -22,19 +22,25 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "action_layer.h"
 #include "quantum.h"
 
+#include "i2c.h"
+
+// custom RGB driver
+extern rgblight_config_t rgblight_config;
+void rgblight_set(void) {
+  if (!rgblight_config.enable) {
+    for (uint8_t i=0; i<RGBLED_NUM; i++) {
+      led[i].r = 0;
+      led[i].g = 0;
+      led[i].b = 0;
+    }
+  }
+
+  i2c_init();
+  i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
+}
+
 __attribute__ ((weak))
 void matrix_scan_user(void) {
-    /* Nothing to do here... yet */
+    rgblight_task();
-}
+    /* Nothing else for now. */
-
-void matrix_init_kb(void) {
-
-  // Call the keymap level matrix init.
-  matrix_init_user();
-
-  // Set our LED pins as output
-  DDRB |= (1<<6);
-}
-
-void matrix_init_user(void) {
 }

keyboards/jj40/jj40.h

@@ -65,6 +65,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
   { K312, K311, K310, K39, K35, K36, K3X, KC_NO, K34, K33, K32, K31 }  \
 }
 
-#define KEYMAP KEYMAP_OFFSET
+#define KEYMAP KEYMAP_MIT
 
 #endif

keyboards/jj40/keymaps/fun40/rules.mk

@@ -11,7 +11,11 @@ MIDI_ENABLE = no            # MIDI controls
 AUDIO_ENABLE = yes          # Audio output on port C6
 UNICODE_ENABLE = no         # Unicode
 BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
-RGBLIGHT_ENABLE = no        # Enable WS2812 RGB underlight.  Do not enable this with audio at the same time.
+
+RGBLIGHT_ENABLE = yes
+RGBLIGHT_CUSTOM_DRIVER = yes
+DISABLE_WS2812 = yes
+
 
 SLEEP_LED_ENABLE = no    # Breathing sleep LED during USB suspend
 

keyboards/jj40/keymaps/krusli/keymap.c

@@ -0,0 +1,85 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "jj40.h"
+#include "action_layer.h"
+
+#define _QWERTY 0
+#define _LOWER  1
+#define _RAISE  2
+
+enum custom_keycodes {
+  QWERTY = SAFE_RANGE,
+  LOWER,
+  RAISE,
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Qwerty
+ * ,-----------------------------------------------------------------------------------.
+ * | Tab  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Esc  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      | Ctrl | GUI  | Alt  |Lower |    Space    |Raise | Left | Down |  Up  |Right |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_QWERTY] = KEYMAP( \
+  KC_TAB,  KC_Q,    KC_W,    KC_E,    KC_R,    KC_T,    KC_Y,    KC_U,    KC_I,    KC_O,    KC_P,    KC_BSPC, \
+  KC_ESC,  KC_A,    KC_S,    KC_D,    KC_F,    KC_G,    KC_H,    KC_J,    KC_K,    KC_L,    KC_SCLN, KC_QUOT, \
+  KC_LSFT, KC_Z,    KC_X,    KC_C,    KC_V,    KC_B,    KC_N,    KC_M,    KC_COMM, KC_DOT,  KC_SLSH, KC_ENT , \
+  _______, KC_LCTL, KC_LGUI, KC_LALT, MO(_LOWER),  KC_SPC,  MO(_RAISE),   KC_LEFT, KC_DOWN, KC_UP,   KC_RGHT \
+),
+
+/* Lower
+ * ,-----------------------------------------------------------------------------------.
+ * |   ~  |   !  |   @  |   #  |   $  |   %  |   ^  |   &  |   *  |   (  |   )  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   _  |   +  |     |    \  |  |   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 |      |      |      |      |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      |      |      |      |      |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_LOWER] = KEYMAP( \
+  KC_TILD, KC_EXLM, KC_AT,   KC_HASH, KC_DLR,  KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  _______, _______,_______, _______, _______, \
+  _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+),
+
+/* Raise
+ * ,-----------------------------------------------------------------------------------.
+ * |   `  |   1  |   2  |   3  |   4  |   5  |   6  |   7  |   8  |   9  |   0  | Bksp |
+ * |------+------+------+------+------+-------------+------+------+------+------+------|
+ * | Del  |  F1  |  F2  |  F3  |  F4  |  F5  |  F6  |   -  |   =  |   [  |   ]  |  \   |
+ * |------+------+------+------+------+------|------+------+------+------+------+------|
+ * |      |  F7  |  F8  |  F9  |  F10 |  F11 |  F12 | RGB  | RGB  | RGB  | RGB  |Enter |
+ * |------+------+------+------+------+------+------+------+------+------+------+------|
+ * |      | RGB  | RGB  | RGB  | RGB  |             |      | Next | Vol- | Vol+ | Play |
+ * `-----------------------------------------------------------------------------------'
+ */
+[_RAISE] = KEYMAP( \
+  KC_GRV,  KC_1,    KC_2,    KC_3,    KC_4,    KC_5,    KC_6,    KC_7,    KC_8,    KC_9,    KC_0,    KC_BSPC, \
+  KC_DEL,  KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_MINS, KC_EQL,  KC_LBRC, KC_RBRC, KC_BSLS, \
+  _______, KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12,  RGB_TOG, RGB_MOD, RGB_VAD, RGB_VAI, _______, \
+  _______, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
+)
+};

keyboards/jj40/keymaps/krusli/readme.md

@@ -0,0 +1,2 @@
+# krusli
+Default JJ40 keymap, adapted with RGB underglow support. GUI and LAlt is also swapped.

keyboards/jj40/rules.mk

@@ -37,8 +37,11 @@ EXTRAKEY_ENABLE = yes
 CONSOLE_ENABLE = no
 COMMAND_ENABLE = yes
 BACKLIGHT_ENABLE = no
-RGBLIGHT_ENABLE = no
+
-RGBLIGHT_CUSTOM_DRIVER = no
+RGBLIGHT_ENABLE = yes
+RGBLIGHT_CUSTOM_DRIVER = yes
+DISABLE_WS2812 = yes  # TODO check if this is necessary
+
 KEY_LOCK_ENABLE = yes
 
 # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE

keyboards/jj40/usbconfig.h

@@ -118,7 +118,8 @@ section at the end of this file).
 /* Define this to 1 if the device has its own power supply. Set it to 0 if the
  * device is powered from the USB bus.
  */
-#define USB_CFG_MAX_BUS_POWER           500
+// max power draw with maxed white underglow measured at 120 mA (peaks)
+#define USB_CFG_MAX_BUS_POWER           150
 /* Set this variable to the maximum USB bus power consumption of your device.
  * The value is in milliamperes. [It will be divided by two since USB
  * communicates power requirements in units of 2 mA.]

keyboards/kc60/info.json

@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "KC60", 
+    "manufacturer": "NKPC", 
+    "processor": "atmega32u4", 
+    "bootloader": "atmel-dfu", 
+    "width": 15, 
+    "height": 5, 
+    "layouts": {
+        "KEYMAP": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":14, "y":0, "w":2}, {"x":0.5, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":14, "y":1, "w":1.5}, {"x":0.75, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":14, "y":2, "w":2.25}, {"x":1.25, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":14, "y":3, "w":2.75}, {"x":0.25, "y":4, "w":1.25}, {"x":1.5, "y":4, "w":1.25}, {"x":2.75, "y":4, "w":1.25}, {"x":9, "y":4, "w":6.25}, {"x":10.25, "y":4, "w":1.25}, {"x":11.5, "y":4, "w":1.25}, {"x":12.75, "y":4, "w":1.25}, {"x":14, "y":4, "w":1.25}]
+        }
+    }
+}

keyboards/lets_split/info.json

@@ -0,0 +1,16 @@
+{
+    "keyboard_name": "Let's Split", 
+    "manufacturer": "various", 
+    "identifier": "", 
+    "url": "", 
+    "maintainer": "qmk", 
+    "processor": "atmega32u4", 
+    "bootloader": "caterina", 
+    "width": 13, 
+    "height": 4, 
+    "layouts": {
+        "KEYMAP": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}]
+        }
+    }
+}

keyboards/lets_split/keymaps/default/keymap.c

@@ -34,7 +34,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * ,-----------------------------------------------------------------------------------.
  * | Esc  |   Q  |   W  |   E  |   R  |   T  |   Y  |   U  |   I  |   O  |   P  | Bksp |
  * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Tab  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  "   |
+ * | Tab  |   A  |   S  |   D  |   F  |   G  |   H  |   J  |   K  |   L  |   ;  |  '   |
  * |------+------+------+------+------+------|------+------+------+------+------+------|
  * | Shift|   Z  |   X  |   C  |   V  |   B  |   N  |   M  |   ,  |   .  |   /  |Enter |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
@@ -52,7 +52,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * ,-----------------------------------------------------------------------------------.
  * | Tab  |   Q  |   W  |   F  |   P  |   G  |   J  |   L  |   U  |   Y  |   ;  | Bksp |
  * |------+------+------+------+------+-------------+------+------+------+------+------|
- * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  "   |
+ * | Esc  |   A  |   R  |   S  |   T  |   D  |   H  |   N  |   E  |   I  |   O  |  '   |
  * |------+------+------+------+------+------|------+------+------+------+------+------|
  * | Shift|   Z  |   X  |   C  |   V  |   B  |   K  |   M  |   ,  |   .  |   /  |Enter |
  * |------+------+------+------+------+------+------+------+------+------+------+------|
@@ -68,7 +68,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 
 /* Dvorak
  * ,-----------------------------------------------------------------------------------.
- * | Tab  |   "  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
+ * | Tab  |   '  |   ,  |   .  |   P  |   Y  |   F  |   G  |   C  |   R  |   L  | Bksp |
  * |------+------+------+------+------+-------------+------+------+------+------+------|
  * | Esc  |   A  |   O  |   E  |   U  |   I  |   D  |   H  |   T  |   N  |   S  |  /   |
  * |------+------+------+------+------+------|------+------+------+------+------+------|

keyboards/mechmini/config.h

@@ -1,42 +1,28 @@
-/*
+/* Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+ * Copyright 2018 TurboMech /u/TurboMech <discord> @A9entOran9e#6134
-
+ * This program is free software: you can redistribute it and/or modify
-This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
-it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
-the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
-(at your option) any later version.
+ *
-
+ *This program is distributed in the hope that it will be useful,
-This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
-GNU General Public License for more details.
+ *
-
+ * You should have received a copy of the GNU General Public License
-You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
+
 #include "config_common.h"
 
 #ifndef CONFIG_H
 #define CONFIG_H
 
-#define VENDOR_ID       0x20A0
+#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x422D
+#define PRODUCT_ID      0xCA40
-// TODO: share these strings with usbconfig.h
+#define MANUFACTURER    MECHKEYS
-// Edit usbconfig.h to change these.
+#define PRODUCT         Mechmini
-#define MANUFACTURER    winkeyless.kr
+#define DESCRIPTION     40% modular keyboard
-#define PRODUCT         mechmini
-
-/* matrix size */
-#define MATRIX_ROWS 8
-#define MATRIX_COLS 15
-
-#define RGBLED_NUM 16
-#define RGBLIGHT_ANIMATIONS
-#define RGB_DI_PIN E2
-
-#define NO_UART 1
-
-/* key combination for command */
-#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
 
 #endif

keyboards/mechmini/mechmini.c

@@ -1,45 +1,17 @@
-/*
+/* Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+ * Copyright 2018 TurboMech /u/TurboMech <discord> @A9entOran9e#6134
-
+ * This program is free software: you can redistribute it and/or modify
-This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
-it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
-the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
-(at your option) any later version.
+ *
-
+ *This program is distributed in the hope that it will be useful,
-This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
-GNU General Public License for more details.
+ *
-
+ * You should have received a copy of the GNU General Public License
-You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "mechmini.h"
-#include "rgblight.h"
-
-#include <avr/pgmspace.h>
-
-#include "action_layer.h"
-#include "i2c.h"
-#include "quantum.h"
-
-extern rgblight_config_t rgblight_config;
-
-void rgblight_set(void) {
-    if (!rgblight_config.enable) {
-        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
-            led[i].r = 0;
-            led[i].g = 0;
-            led[i].b = 0;
-        }
-    }
-
-    i2c_init();
-    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
-}
-
-__attribute__ ((weak))
-void matrix_scan_user(void) {
-    rgblight_task();
-}

keyboards/mechmini/mechmini.h

@@ -1,42 +1,30 @@
-/*
+/* Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
-Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+ * Copyright 2018 TurboMech /u/TurboMech <discord> @A9entOran9e#6134
-
+ * This program is free software: you can redistribute it and/or modify
-This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
-it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
-the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
-(at your option) any later version.
+ *
-
+ *This program is distributed in the hope that it will be useful,
-This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
-GNU General Public License for more details.
+ *
-
+ * You should have received a copy of the GNU General Public License
-You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #ifndef MECHMINI_H
 #define MECHMINI_H
 
-#include "keycode.h"
-#include "action.h"
 #include "quantum.h"
 
-#define KEYMAP( \
+#ifdef KEYBOARD_mechmini_v1
-    K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, \
+    #include "v1.h"
-    K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, \
+#endif
-    K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, \
+
-    K00, K10, K20,      K56, K57, KB0,           KC0, K66  \
+#ifdef KEYBOARD_mechmini_v2
-) \
+    #include "v2.h"
-{ \
+#endif
-    { K00, K10, K20, K56, KC_NO,    K57,    KC_NO, KC_NO,    KB0, KC0, K66, KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
-    { K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
-    { K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
-    { K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC_NO,    KC_NO,    KC_NO }, \
-    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
-    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
-    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
-    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO } \
-}
 
 #endif

keyboards/mechmini/readme.md

@@ -1,13 +1,21 @@
-mechmini
+Mechmini
 ========
 
-A compact ortholinear/staggered keyboard.
+![mechmini](https://cdn.shopify.com/s/files/1/1697/5323/products/20495451_468333093530388_1648547540_o_grande.jpg?v=1510792821)
 
-Keyboard Maintainer: QMK Community  
+A 40% compact ortholinear/staggered keyboard. 
-Hardware Supported: mechmini PCB  
-Hardware Availability: https://mechkeys.ca/collections/keyboards/products/mechmini-2-0-pcb
 
-Make example for this keyboard (after setting up your build environment):
+Version 1 was originally bootmapper (ps2avrGB) and can be ported to QMK following the v1 readme (../mechmini/v1/readme.md).  This version is no longer in production.  
+
+Version 2 (Mechmini 2.0) was shipped powered by QMK [More info on MECHKEYS](https://mechkeys.ca).
+
+Keyboard Maintainer: QMK Community (version 1) & [TurboMech](https://github.com/TurboMech) (version 2 - aka Mechmini 2.0)
+
+Hardware Supported: Mechmini keyboard
+
+Hardware Availability: [MECHKEYS](https://mechkeys.ca/collections/keyboards/products/mechmini-2-0)
+
+Make example for this keyboard (after setting up your build environment), this will make the Mechmini 2.0 default keymap (split space) - please see v1 readme for v1 make instructions:
 
     make mechmini:default
 
@@ -15,50 +23,6 @@ See [build environment setup](https://docs.qmk.fm/build_environment_setup.html)
 
 ## Mechmini Notes
 
-Note that this is a complete replacement for the firmware, so you won't be
+There are 2 versions of the Mechmini keyboard.  Please read the readme for the version you have for make instructions.
-using Bootmapper Client to change any keyboard settings, since not all the
-USB report options are supported.
 
-## Installing
 
-First, install the requirements. These commands are for OSX, but all you
-need is the AVR toolchain and `bootloadHID` for flashing:
-
-```
-$ brew cask install crosspack-avr
-$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
-```
-
-In order to use the `./program` script, which can reboot the board into
-the bootloader, you'll need Python 2 with PyUSB installed:
-
-```
-$ pip install pyusb
-```
-
-Then, with the keyboard plugged in, simply run this command from the
-`qmk_firmware` directory:
-
-```
-$ make mechmini:program
-```
-
-If you prefer, you can just build it and flash the firmware directly with
-`bootloadHID` if you boot the board while holding down `L_Ctrl` to keep it
-in the bootloader:
-
-```
-$ make mechmini
-$ bootloadHID -r mechmini_default.hex
-```
-
-## Troubleshooting
-
-From my experience, it's really hard to brick these boards. But these
-tricks have been useful when it got stuck in a weird scenario.
-
-1. Try plugging the board in while pressing `L_Ctrl`. This will force it
-   to boot only the bootloader without loading the firmware. Once this is
-   done, just reflash the board with the original firmware.
-2. Sometimes USB hubs can act weird, so try connecting the board directly
-   to your computer or plugging/unplugging the USB hub.

keyboards/mechmini/rules.mk

@@ -1,50 +1 @@
-# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+DEFAULT_FOLDER = mechmini/v2
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# MCU name
-MCU = atmega32a
-PROTOCOL = VUSB
-
-# unsupported features for now
-NO_UART = yes
-NO_SUSPEND_POWER_DOWN = yes
-
-# processor frequency
-F_CPU = 12000000
-
-# Bootloader
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
-#     different sizes, comment this out, and the correct address will be loaded 
-#     automatically (+60). See bootloader.mk for all options.
-BOOTLOADER = atmel-dfu
-
-# build options
-BOOTMAGIC_ENABLE = yes
-MOUSEKEY_ENABLE = yes
-EXTRAKEY_ENABLE = yes
-CONSOLE_ENABLE = yes
-COMMAND_ENABLE = yes
-BACKLIGHT_ENABLE = no
-RGBLIGHT_ENABLE = yes
-RGBLIGHT_CUSTOM_DRIVER = yes
-
-OPT_DEFS = -DDEBUG_LEVEL=0
-
-# custom matrix setup
-CUSTOM_MATRIX = yes
-SRC = matrix.c i2c.c
-
-# programming options
-PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex

keyboards/mechmini/v1/README.md

@@ -0,0 +1,83 @@
+Mechmini V1
+===========
+
+A 40% ortholinear/staggered keyboard, that was originally bootmapper and can be ported to QMK following this readme.  This version is no longer in production [More info on MECHKEYS](https://mechkeys.ca).
+
+Keyboard Maintainer: QMK Community 
+Hardware Supported: Mechmini 1 PCB  
+Hardware Availability: Version 1 (Bootmapper) no longer in production [MECHKEYS](https://mechkeys.ca)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make mechmini/v1:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+## Mechmini Notes
+
+Note that this is a complete replacement for the firmware, so you won't be
+using Bootmapper Client to change any keyboard settings, since not all the
+USB report options are supported.
+
+## Installing
+
+First, install the requirements. These commands are for OSX, but all you
+need is the AVR toolchain and `bootloadHID` for flashing:
+
+```
+$ brew cask install crosspack-avr
+$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
+```
+
+In order to use the `./program` script, which can reboot the board into
+the bootloader, you'll need Python 2 with PyUSB installed:
+
+```
+$ pip install pyusb
+```
+
+Then, with the keyboard plugged in, simply run this command from the
+`qmk_firmware` directory:
+
+```
+$ make mechmini:program
+```
+
+If you prefer, you can just build it and flash the firmware directly with
+`bootloadHID` if you boot the board while holding down `L_Ctrl` to keep it
+in the bootloader:
+
+```
+$ make mechmini
+$ bootloadHID -r mechmini_default.hex
+```
+
+## Troubleshooting
+
+From my experience, it's really hard to brick these boards. But these
+tricks have been useful when it got stuck in a weird scenario.
+
+1. Try plugging the board in while pressing `L_Ctrl`. This will force it
+   to boot only the bootloader without loading the firmware. Once this is
+   done, just reflash the board with the original firmware.
+2. Sometimes USB hubs can act weird, so try connecting the board directly
+   to your computer or plugging/unplugging the USB hub.
+3. If errors happen with 
+`./tmk_core/common/avr/suspend.c` it is likely you implemented a RGB underglow sleep setting previously.  Simply comment out the following code found under `void suspend_wakeup_init(void)`:
+```
+ifdef RGBLIGHT_ANIMATIONS
+    rgblight_timer_enable();
+    _delay_ms(50);
+    rgblight_set();
+#endif
+```
+So that the resulting code should know reflect:
+```
+/*#ifdef RGBLIGHT_ANIMATIONS
+    rgblight_timer_enable();
+    _delay_ms(50);
+    rgblight_set();
+#endif*/
+```
+
+

keyboards/mechmini/v1/config.h

@@ -0,0 +1,48 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef V1_CONFIG_H
+#define V1_CONFIG_H
+
+#include "config_common.h"
+
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xCA40
+#define DEVICE_VER      0x0001
+// TODO: share these strings with usbconfig.h
+// Edit usbconfig.h to change these.
+#define MANUFACTURER    MECHKEYS
+#define PRODUCT         Mechmini
+#define DESCRIPTION     40% modular keyboard
+
+/* matrix size */
+#define MATRIX_ROWS 8
+#define MATRIX_COLS 15
+
+#define NO_UART 1
+
+/* RGB underglow */
+// The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards.
+// The same pin is used on the JJ40, at least.
+#define RGBLED_NUM 16
+#define RGBLIGHT_ANIMATIONS
+#define RGB_DI_PIN E2
+
+/* key combination for command */
+#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+#endif

keyboards/mechmini/v1/keymaps/default/keymap.c

@@ -14,16 +14,12 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
 #include "mechmini.h"
-#include "rgblight.h"
 #include "quantum.h"
 
-#define MAX_BRIGHTNESS 15
+#define _BL  0   // base layer
-#define MAX_BRIGHTNESS_IOS 5  // max brightness suitable for iOS devices
+#define _FN1 1  // function layer 1
-
+#define _FN2 2  // function layer 2
-#define _BL 0
+#define _FN3 3  // function layer 3
-#define _FN1 1
-#define _FN2 2
-#define _FN3 3
 #define _____ KC_TRNS
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
@@ -52,109 +48,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      _____,      _____,      _____,            _____,        _____,         _____,                   _____,    _____
    )
 };
-
-/**
- * Blank keymap
- [0] = KEYMAP(
-   _____,      _____,      _____,      _____,    _____,    _____,    _____,    _____,    _____,    _____,    _____,    _____
-   _____,      _____,      _____,      _____,    _____,    _____,    _____,    _____,    _____,    _____,    _____,
-   _____,      _____,      _____,      _____,    _____,    _____,    _____,    _____,    _____,    _____,    _____,
-   _____,      _____,      _____,            _____,        _____,         _____,                   _____,    _____
- )
- */
-
-uint8_t current_level = 4;
-int is_on = 0;
-
-uint8_t r = 0xFF;
-uint8_t g = 0xFF;
-uint8_t b = 0xFF;
-
-uint8_t max_brightness = MAX_BRIGHTNESS_IOS;
-
-enum macro_id {
-  TOGGLE_RGB,
-  BRIGHTNESS_DOWN,
-  BRIGHTNESS_UP,
-  COLOR_1,
-  COLOR_2,
-  COLOR_3,
-  ENABLE_MAX_BRIGHTNESS
-};
-
-const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
-  keyevent_t event = record->event;
-
-  switch (id) {
-    case TOGGLE_RGB:
-      if (event.pressed) {
-       if (!is_on) {
-         current_level = 4;
-         is_on = 1;
-       } else {
-         is_on = 0;
-       }
-      }
-    case BRIGHTNESS_DOWN:
-      if (event.pressed && current_level > 0) {
-        current_level--;
-      }
-      break;
-    case BRIGHTNESS_UP:
-      if (event.pressed && current_level < max_brightness) {
-        current_level++;
-      }
-      break;
-    case COLOR_1:  // set to pink
-      if (event.pressed) {
-        r = 0xFF;
-        g = 0x81;
-        b = 0xC2;
-      }
-      break;
-    case COLOR_2:  // set to cyan
-      if (event.pressed) {
-        r = 0x00;
-        g = 0xE0;
-        b = 0xFF;
-      }
-      break;
-    case COLOR_3:  // set to white
-      if (event.pressed) {
-        r = 0xFF;
-        g = 0xFF;
-        b = 0xFF;
-      }
-      break;
-    case ENABLE_MAX_BRIGHTNESS: // enable all 16 brightness steps
-      if (event.pressed) {
-        max_brightness = MAX_BRIGHTNESS;
-      }
-      break;
-  }
-
-  return MACRO_NONE;
-}
-
-const uint16_t fn_actions[] PROGMEM = {
-};
-
-void rgblight_setrgb(uint8_t r, uint8_t g, uint8_t b);
-
-uint8_t dim(uint8_t color, uint8_t opacity) {
-   return ((uint16_t) color * opacity / 0xFF) & 0xFF;
-}
-
-void user_setrgb(uint8_t r, uint8_t g, uint8_t b) {
-   uint8_t alpha = current_level * 0x11;
-   rgblight_setrgb(dim(r, alpha), dim(g, alpha), dim(b, alpha));
-}
-
-void matrix_scan_user(void) {
-  if (!is_on) {
-    current_level = 0;
-    user_setrgb(r, g, b);
-  } else {
-    user_setrgb(r, g, b);
-  }
-}

keyboards/mechmini/v1/rules.mk

@@ -0,0 +1,50 @@
+# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# MCU name
+MCU = atmega32a
+PROTOCOL = VUSB
+
+# unsupported features for now
+NO_UART = yes
+NO_SUSPEND_POWER_DOWN = yes
+
+# processor frequency
+F_CPU = 12000000
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = atmel-dfu
+
+# build options
+BOOTMAGIC_ENABLE = yes
+MOUSEKEY_ENABLE = yes
+EXTRAKEY_ENABLE = yes
+CONSOLE_ENABLE = yes
+COMMAND_ENABLE = yes
+BACKLIGHT_ENABLE = no
+RGBLIGHT_ENABLE = yes
+RGBLIGHT_CUSTOM_DRIVER = yes
+
+OPT_DEFS = -DDEBUG_LEVEL=0
+
+# custom matrix setup
+CUSTOM_MATRIX = yes
+SRC = matrix.c i2c.c
+
+# programming options
+PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex

keyboards/mechmini/v1/usbconfig.h

@@ -118,7 +118,7 @@ section at the end of this file).
 /* Define this to 1 if the device has its own power supply. Set it to 0 if the
  * device is powered from the USB bus.
  */
-#define USB_CFG_MAX_BUS_POWER           100
+#define USB_CFG_MAX_BUS_POWER           500
 /* Set this variable to the maximum USB bus power consumption of your device.
  * The value is in milliamperes. [It will be divided by two since USB
  * communicates power requirements in units of 2 mA.]

keyboards/mechmini/v1/v1.c

@@ -0,0 +1,44 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#include "v1.h"
+#include <avr/pgmspace.h>
+#include "action_layer.h"
+#include "i2c.h"
+#include "quantum.h"
+#include "rgblight.h"
+
+// custom RGB driver
+extern rgblight_config_t rgblight_config;
+void rgblight_set(void) {
+    if (!rgblight_config.enable) {
+        for (uint8_t i = 0; i < RGBLED_NUM; i++) {
+            led[i].r = 0;
+            led[i].g = 0;
+            led[i].b = 0;
+        }
+    }
+
+    i2c_init();
+    i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+    rgblight_task();
+     /* add other tasks to be done on each matrix scan */
+}

keyboards/mechmini/v1/v1.h

@@ -0,0 +1,43 @@
+/*
+Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef V1_H
+#define V2_H
+
+#include "../mechmini.h"
+#include "keycode.h"
+#include "action.h"
+#include "quantum.h"
+
+#define KEYMAP( \
+    K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, \
+    K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, \
+    K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, \
+    K00, K10, K20,      K56, K57, KB0,           KC0, K66  \
+) \
+{ \
+    { K00, K10, K20, K56, KC_NO,    K57,    KC_NO, KC_NO,    KB0, KC0, K66, KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
+    { K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
+    { K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
+    { K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC_NO,    KC_NO,    KC_NO }, \
+    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
+    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
+    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO }, \
+    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO } \
+}
+
+#endif

keyboards/mechmini/v2/README.md

@@ -0,0 +1,22 @@
+Mechmini 2.0
+============
+
+A 40% compact ortholinear/staggered keyboard. 
+
+Version 2 (Mechmini 2.0) was shipped powered by QMK [More info on MECHKEYS](https://mechkeys.ca).
+
+Keyboard Maintainer: [TurboMech](https://github.com/TurboMech)
+
+Hardware Supported: Mechmini 2.0 keyboard
+
+Hardware Availability: [MECHKEYS Mechmini 2.0](https://mechkeys.ca/collections/keyboards/products/mechmini-2-0)
+
+Make example for this keyboard (after setting up your build environment), this will make the Mechmini 2.0 default keymap (split space):
+
+    make mechmini/v2:default
+
+See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
+
+## Mechmini Notes
+
+There are 2 versions of the Mechmini keyboard.  Please read the readme for the version you have for make instructions.

keyboards/mechmini/v2/config.h

@@ -0,0 +1,77 @@
+/* Copyright 2018 TurboMech /u/TurboMech <discord> @A9entOran9e#6134
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#ifndef V2_CONFIG_H
+#define V2_CONFIG_H
+
+#include "config_common.h"
+
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0xCA40
+#define DEVICE_VER      0x0002
+#define MANUFACTURER    MECHKEYS
+#undef PRODUCT
+#define PRODUCT         Mechmini 2
+#undef DESCRIPTION
+#define DESCRIPTION     40% modular keyboard
+
+/* key matrix size */
+#undef MATRIX_COLS
+#undef MATRIX_ROWS
+#define MATRIX_ROWS 4
+#define MATRIX_COLS 12
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { D0, D1, D2, D3 }
+#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, B3, B1, B0, D5, B7, C7 }
+#define UNUSED_PINS
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B6
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCING_DELAY 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+#define RGB_DI_PIN E2
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 14
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#endif

keyboards/mechmini/v2/keymaps/2u_space_ortho/keymap.c

@@ -0,0 +1,124 @@
+#include "mechmini.h"
+
+#define _BL 0
+#define _FN1 1
+#define _FN2 2
+
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[_BL] = KEYMAP_2U_SPACE_ORTHO(
+		F(0), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
+		KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
+		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT,
+		KC_CAPS, KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT),
+
+	[_FN1] = KEYMAP_2U_SPACE_ORTHO(
+		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_MINS, KC_EQL, KC_BSLS, KC_DEL,
+		KC_TRNS, KC_TRNS, KC_TRNS, M(1), M(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_END, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY),
+
+	[_FN2] = KEYMAP_2U_SPACE_ORTHO(
+		KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS,
+		KC_TRNS, BL_TOGG, BL_STEP, BL_INC, BL_DEC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL,
+		KC_TRNS, RGB_TOG, RGB_MOD, RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, KC_HOME, KC_END, KC_TRNS,
+		RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_PGDN, KC_PGUP, KC_MPLY),
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+
+
+	switch (id) {
+		case 1:
+			if (record->event.pressed) {
+				return MACRO( D(LCTL), T(C), U(LCTL), END );
+			}
+			break;
+		case 2:
+			if (record->event.pressed) {
+				return MACRO( D(LCTL), T(V), U(LCTL), END );
+			}
+			break;
+	}
+	return MACRO_NONE;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+
+	} else {
+
+	}
+
+}
+
+enum function_id {
+    SHIFT_ESC,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(SHIFT_ESC),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t shift_esc_shift_mask;
+  switch (id) {
+    case SHIFT_ESC:
+      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+      if (record->event.pressed) {
+        if (shift_esc_shift_mask) {
+          add_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          add_key(KC_ESC);
+          send_keyboard_report();
+        }
+      } else {
+        if (shift_esc_shift_mask) {
+          del_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          del_key(KC_ESC);
+          send_keyboard_report();
+        }
+      }
+      break;
+  }
+}

keyboards/mechmini/v2/keymaps/625_space/keymap.c

@@ -0,0 +1,116 @@
+#include "mechmini.h"
+
+#define _BL 0
+#define _FN1 1
+#define _FN2 2
+
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[_BL] = KEYMAP_625_SPACE(
+		F(0), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
+		KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT,
+		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_LSFT, KC_DOT,
+		KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, MO(1), MO(2)),
+
+	[_FN1] = KEYMAP_625_SPACE(
+		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL,
+		KC_TRNS, KC_PGUP, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_MINS, KC_EQL, KC_TRNS,
+		KC_LSFT, KC_PGDN, KC_VOLD, KC_TRNS, KC_TRNS, KC_TRNS, KC_SCLN, KC_QUOT, KC_SLSH, KC_TRNS, KC_HOME,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+    [_FN2] = KEYMAP_625_SPACE(
+		KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, RESET,
+		KC_TRNS, BL_TOGG, BL_STEP, BL_INC, BL_DEC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_CAPS, RGB_TOG, RGB_MOD, RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, KC_TRNS, KC_END,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+
+
+	switch (id) {
+
+	}
+	return MACRO_NONE;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+
+	} else {
+
+	}
+
+}
+
+enum function_id {
+    SHIFT_ESC,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(SHIFT_ESC),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t shift_esc_shift_mask;
+  switch (id) {
+    case SHIFT_ESC:
+      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+      if (record->event.pressed) {
+        if (shift_esc_shift_mask) {
+          add_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          add_key(KC_ESC);
+          send_keyboard_report();
+        }
+      } else {
+        if (shift_esc_shift_mask) {
+          del_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          del_key(KC_ESC);
+          send_keyboard_report();
+        }
+      }
+      break;
+  }
+}

keyboards/mechmini/v2/keymaps/default/keymap.c

@@ -0,0 +1,115 @@
+#include "mechmini.h"
+
+#define _BL 0
+#define _FN1 1
+#define _FN2 2
+
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[_BL] = KEYMAP_SPLIT_SPACE(
+		F(0), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
+		KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT,
+		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_RSFT, KC_DOT,
+		KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_SPC, KC_RCTL, MO(1), MO(2)),
+
+	[_FN1] = KEYMAP_SPLIT_SPACE(
+		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL,
+		KC_TRNS, KC_PGUP, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_MINS, KC_EQL, KC_TRNS,
+		KC_LSFT, KC_PGDN, KC_VOLD, KC_TRNS, KC_TRNS, KC_SCLN, KC_QUOT, KC_SLSH, KC_COMM, KC_TRNS, KC_HOME,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	[_FN2] = KEYMAP_SPLIT_SPACE(
+		KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, RESET,
+		KC_TRNS, BL_TOGG, BL_STEP, BL_INC, BL_DEC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_CAPS, RGB_TOG, RGB_MOD, RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, KC_TRNS, KC_END,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+
+
+	switch (id) {
+
+	}
+	return MACRO_NONE;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+
+	} else {
+
+	}
+
+}
+
+enum function_id {
+    SHIFT_ESC,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(SHIFT_ESC),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t shift_esc_shift_mask;
+  switch (id) {
+    case SHIFT_ESC:
+      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+      if (record->event.pressed) {
+        if (shift_esc_shift_mask) {
+          add_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          add_key(KC_ESC);
+          send_keyboard_report();
+        }
+      } else {
+        if (shift_esc_shift_mask) {
+          del_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          del_key(KC_ESC);
+          send_keyboard_report();
+        }
+      }
+      break;
+  }
+}

keyboards/mechmini/v2/keymaps/default/readme.md

@@ -0,0 +1,2 @@
+# The Default Mechmini 2.0 Layout - the same as split_space keymap
+

keyboards/mechmini/v2/keymaps/ortho/keymap.c

@@ -0,0 +1,124 @@
+#include "mechmini.h"
+
+#define _BL 0
+#define _FN1 1
+#define _FN2 2
+
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[_BL] = KEYMAP_ORTHO(
+		F(0), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
+		KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
+		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT,
+		KC_CAPS, KC_LCTL, KC_LALT, KC_LGUI, MO(1), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT),
+
+	[_FN1] = KEYMAP_ORTHO(
+		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_MINS, KC_EQL, KC_BSLS, KC_DEL,
+		KC_TRNS, KC_TRNS, KC_TRNS, M(1), M(1), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_END, KC_TRNS,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY),
+
+	[_FN2] = KEYMAP_ORTHO(
+		KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS,
+		KC_TRNS, BL_TOGG, BL_STEP, BL_INC, BL_DEC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL,
+		KC_TRNS, RGB_TOG, RGB_MOD, RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, KC_HOME, KC_END, KC_TRNS,
+		RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MNXT, KC_PGDN, KC_PGUP, KC_MPLY),
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+
+
+	switch (id) {
+		case 1:
+			if (record->event.pressed) {
+				return MACRO( D(LCTL), T(C), U(LCTL), END );
+			}
+			break;
+		case 2:
+			if (record->event.pressed) {
+				return MACRO( D(LCTL), T(V), U(LCTL), END );
+			}
+			break;
+	}
+	return MACRO_NONE;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+
+	} else {
+
+	}
+
+}
+
+enum function_id {
+    SHIFT_ESC,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(SHIFT_ESC),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t shift_esc_shift_mask;
+  switch (id) {
+    case SHIFT_ESC:
+      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+      if (record->event.pressed) {
+        if (shift_esc_shift_mask) {
+          add_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          add_key(KC_ESC);
+          send_keyboard_report();
+        }
+      } else {
+        if (shift_esc_shift_mask) {
+          del_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          del_key(KC_ESC);
+          send_keyboard_report();
+        }
+      }
+      break;
+  }
+}

keyboards/mechmini/v2/keymaps/split_space/keymap.c

@@ -0,0 +1,115 @@
+#include "mechmini.h"
+
+#define _BL 0
+#define _FN1 1
+#define _FN2 2
+
+#define MODS_CTRL_MASK  (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+	[_BL] = KEYMAP_SPLIT_SPACE(
+		F(0), KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
+		KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT,
+		KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_RSFT, KC_DOT,
+		KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_SPC, KC_RCTL, MO(1), MO(2)),
+
+	[_FN1] = KEYMAP_SPLIT_SPACE(
+		KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL,
+		KC_TRNS, KC_PGUP, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_MINS, KC_EQL, KC_TRNS,
+		KC_LSFT, KC_PGDN, KC_VOLD, KC_TRNS, KC_TRNS, KC_SCLN, KC_QUOT, KC_SLSH, KC_COMM, KC_TRNS, KC_HOME,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+	[_FN2] = KEYMAP_SPLIT_SPACE(
+		KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, RESET,
+		KC_TRNS, BL_TOGG, BL_STEP, BL_INC, BL_DEC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
+		KC_CAPS, RGB_TOG, RGB_MOD, RGB_VAI, RGB_VAD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, KC_TRNS, KC_END,
+		KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
+
+};
+
+const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
+
+
+	switch (id) {
+
+	}
+	return MACRO_NONE;
+}
+
+void matrix_init_user(void) {
+}
+
+void matrix_scan_user(void) {
+}
+
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+	return true;
+}
+
+void led_set_user(uint8_t usb_led) {
+
+	if (usb_led & (1 << USB_LED_NUM_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_COMPOSE)) {
+
+	} else {
+
+	}
+
+	if (usb_led & (1 << USB_LED_KANA)) {
+
+	} else {
+
+	}
+
+}
+
+enum function_id {
+    SHIFT_ESC,
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+  [0]  = ACTION_FUNCTION(SHIFT_ESC),
+};
+
+void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
+  static uint8_t shift_esc_shift_mask;
+  switch (id) {
+    case SHIFT_ESC:
+      shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
+      if (record->event.pressed) {
+        if (shift_esc_shift_mask) {
+          add_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          add_key(KC_ESC);
+          send_keyboard_report();
+        }
+      } else {
+        if (shift_esc_shift_mask) {
+          del_key(KC_GRV);
+          send_keyboard_report();
+        } else {
+          del_key(KC_ESC);
+          send_keyboard_report();
+        }
+      }
+      break;
+  }
+}

keyboards/mechmini/v2/keymaps/split_space/readme.md

@@ -0,0 +1,2 @@
+# The Default Mechmini 2.0 Layout
+

keyboards/mechmini/v2/rules.mk

@@ -0,0 +1,63 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = atmel-dfu
+
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
+# Boot Section Size in *bytes*
+OPT_DEFS += -DBOOTLOADER_SIZE=4096
+
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = yes	# Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = no	# Console for debug(+400)
+COMMAND_ENABLE = no    # Commands for debug and configuration
+SLEEP_LED_ENABLE = no  # Breathing sleep LED during USB suspend
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality
+AUDIO_ENABLE = no
+RGBLIGHT_ENABLE = yes

keyboards/mechmini/v2/v2.c

@@ -0,0 +1 @@
+#include "v2.h"

keyboards/mechmini/v2/v2.h

@@ -0,0 +1,69 @@
+/* Copyright 2018 TurboMech /u/TurboMech <discord> @A9entOran9e#6134
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#ifndef V2_H
+#define V2_H
+
+#include "../mechmini.h"
+
+#define KEYMAP_ORTHO( \
+	K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \
+	K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \
+	K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \
+	K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311  \
+) { \
+	{ K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011 }, \
+	{ K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111 }, \
+	{ K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211 }, \
+	{ K300,  K301,  K302,  K303,  K304,  K305,  K305,  K307,  K308,  K309,  K310,  K311 }  \
+}
+
+#define KEYMAP_625_SPACE( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109,       K111, \
+    K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \
+    K300, K301, K302,                   K306,                   K310, K311  \
+) { \
+    { K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011 }, \
+    { K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  KC_NO, K111 }, \
+    { K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211 }, \
+    { K300,  K301,  K302,  KC_NO, KC_NO, KC_NO, K306,  KC_NO, KC_NO, KC_NO, K310,  K311 }  \
+}
+
+#define KEYMAP_SPLIT_SPACE( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109,       K111, \
+    K200,       K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \
+    K300, K301, K302,       K304,             K307,       K309, K310, K311  \
+) { \
+    { K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011 }, \
+    { K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  KC_NO, K111 }, \
+    { K200,  KC_NO, K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211 }, \
+    { K300,  K301,  K302,  KC_NO, K304,  KC_NO, KC_NO, K307,  KC_NO, K309,  K310,  K311 }  \
+}
+
+#define KEYMAP_2U_SPACE_ORTHO( \
+    K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \
+    K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \
+    K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \
+    K300, K301, K302, K303, K304,    K305,    K307, K308, K309, K310, K311  \
+) { \
+    { K000,  K001,  K002,  K003,  K004,  K005,  K006,  K007,  K008,  K009,  K010,  K011 }, \
+    { K100,  K101,  K102,  K103,  K104,  K105,  K106,  K107,  K108,  K109,  K110,  K111 }, \
+    { K200,  K201,  K202,  K203,  K204,  K205,  K206,  K207,  K208,  K209,  K210,  K211 }, \
+    { K300,  K301,  K302,  K303,  K304,  K305,  K305,  K307,  K308,  K309,  K310,  K311 }  \
+}
+
+#endif

keyboards/nyquist/keymaps/pitty/Makefile

@@ -1,7 +0,0 @@
-RGBLIGHT_ENABLE = yes
-NKRO_ENABLE = yes
-
-
-ifndef QUANTUM_DIR
-	include ../../../../Makefile
-endif

keyboards/octagon/info.json

@@ -0,0 +1,13 @@
+{
+    "keyboard_name": "Octagon", 
+    "manufacturer": "Duck", 
+    "processor": "atmega32u4", 
+    "bootloader": "atmel-dfu", 
+    "width": 16, 
+    "height": 6, 
+    "layouts": {
+        "KEYMAP": {
+            "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":14, "y":1, "w":2}, {"x":15, "y":1}, {"x":0.5, "y":2, "w":1.5}, {"x":1.5, "y":2}, {"x":2.5, "y":2}, {"x":3.5, "y":2}, {"x":4.5, "y":2}, {"x":5.5, "y":2}, {"x":6.5, "y":2}, {"x":7.5, "y":2}, {"x":8.5, "y":2}, {"x":9.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":14, "y":2, "w":1.5}, {"x":15, "y":2}, {"x":0.75, "y":3, "w":1.75}, {"x":1.75, "y":3}, {"x":2.75, "y":3}, {"x":3.75, "y":3}, {"x":4.75, "y":3}, {"x":5.75, "y":3}, {"x":6.75, "y":3}, {"x":7.75, "y":3}, {"x":8.75, "y":3}, {"x":9.75, "y":3}, {"x":10.75, "y":3}, {"x":11.75, "y":3}, {"x":14, "y":3, "w":2.25}, {"x":15, "y":3}, {"x":1.25, "y":4, "w":2.25}, {"x":2.25, "y":4}, {"x":3.25, "y":4}, {"x":4.25, "y":4}, {"x":5.25, "y":4}, {"x":6.25, "y":4}, {"x":7.25, "y":4}, {"x":8.25, "y":4}, {"x":9.25, "y":4}, {"x":10.25, "y":4}, {"x":11.25, "y":4}, {"x":13, "y":4, "w":1.75}, {"x":14, "y":4}, {"x":15, "y":4}, {"x":0.25, "y":5, "w":1.25}, {"x":1.5, "y":5, "w":1.25}, {"x":2.75, "y":5, "w":1.25}, {"x":9, "y":5, "w":6.25}, {"x":10, "y":5}, {"x":11, "y":5}, {"x":12, "y":5}, {"x":13, "y":5}, {"x":14, "y":5}, {"x":15, "y":5}]
+        }
+    }
+}

keyboards/orthodox/rev3/rules.mk

@@ -1,2 +1 @@
 BACKLIGHT_ENABLE = no
-

keyboards/planck/keymaps/aviator/config.h

@@ -0,0 +1,44 @@
+#ifndef CONFIG_USER_H
+#define CONFIG_USER_H
+
+#include "config_common.h"
+
+#define BACKLIGHT_BREATHING
+
+#ifdef AUDIO_ENABLE
+    #define STARTUP_SONG SONG(PLANCK_SOUND)
+    // #define STARTUP_SONG SONG(NO_SOUND)
+
+    #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \
+                                  SONG(COLEMAK_SOUND), \
+                                  SONG(DVORAK_SOUND) \
+                                }
+#endif
+
+#define MUSIC_MASK (keycode != KC_NO)
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+
+#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 2
+
+#endif