Update readme.md

keyboards/atom47/atom47.c

@@ -16,9 +16,16 @@ void matrix_scan_kb(void) {
 
 void led_init_ports(void) {
     // * Set our LED pins as output
-    DDRE |= (1 << 6);
+    DDRB &= ~(1<<5);
 }
 
 void led_set_kb(uint8_t usb_led) {
-    led_set_user(usb_led);
+	if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
+        // Turn capslock on
+        PORTF |= (1<<5);
+    } else {
+        // Turn capslock off
+        PORTF &= ~(1<<5);
+    }
+	led_set_user(usb_led);
 }

keyboards/atom47/atom47.h

@@ -9,14 +9,14 @@
 #define KEYMAP_ANSI( \
     k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
 	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a,      k1c, \
-	k20,      k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \
+	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a,      k2c, \
-	k30, k31, k32, k33,      k35,      k37,      k39, k3a, k3b, k3c \
+	k30, k31, k32, k33, k34,      k36,      k38, k39, k3a,      k3c \
 ) \
 { \
     {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \
 	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \
-	{k20, XXX, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c}, \
+	{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, XXX, k2c}, \
-	{k30, k31, k32, k33, XXX, k35, XXX, k37, XXX, k39, k3a, k3b, k3c}  \
+	{k30, k31, k32, k33, k34, XXX, k36, XXX, k38, k39, k3a, XXX, k3c}  \
 }
 
 void matrix_init_user(void);

keyboards/atom47/config.h

@@ -34,8 +34,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 // ROWS: Top to bottom, COLS: Left to right
 
-#define MATRIX_ROW_PINS {B3,B2,B1,B0}
+#define MATRIX_ROW_PINS {B1,B2,B3,B7}
-#define MATRIX_COL_PINS {B7,F0,F1,F4,F6,D4,D6,D7,B4,B5,C6,C7,F7}
+#define MATRIX_COL_PINS {D7,D5,F0,F1,F4,F6,F7,D4,C7,C6,D6,B5,B4}
 #define UNUSED_PINS
 
 #define BACKLIGHT_PIN B6
@@ -49,6 +49,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCING_DELAY 5
 
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
 
 /* key combination for command */
 #define IS_COMMAND() ( \
@@ -59,11 +63,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #define BACKLIGHT_LEVELS 4
 
-#define RGB_DI_PIN F5    // The pin the LED strip is connected to
-#define RGBLED_NUM 6     // Number of LEDs in your strip
-
-#define QMK_ESC_OUTPUT B7 // usually COL
-#define QMK_ESC_INPUT B3 // usually ROW
-#define QMK_LED E6
-
 #endif
+
+#define RGB_DI_PIN D0    // The pin the LED strip is connected to
+#define RGBLED_NUM 1     // Number of LEDs in your strip
+
+#define QMK_ESC_OUTPUT D7 // usually COL
+#define QMK_ESC_INPUT B1 // usually ROW
+#define QMK_LED B6

keyboards/atom47/keymaps/LEdiodes/config.h

@@ -63,11 +63,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 #define BACKLIGHT_LEVELS 4
 
+#endif
+
 #define RGB_DI_PIN D0    // The pin the LED strip is connected to
 #define RGBLED_NUM 1     // Number of LEDs in your strip
 
 #define QMK_ESC_OUTPUT D7 // usually COL
 #define QMK_ESC_INPUT B1 // usually ROW
-#define QMK_LED B6
+#define QMK_LED B6
-
-#endif

keyboards/atom47/keymaps/LEdiodes/keymap.c

@@ -1,4 +1,4 @@
-#include "atom47.h"
+#include QMK_KEYBOARD_H
 
 // These are all aliases for the  function layers.
 #define _L0 0

keyboards/atom47/keymaps/default/keymap.c

@@ -1,4 +1,4 @@
-#include "atom47.h"
+#include QMK_KEYBOARD_H
 
 // Each layer gets a name for readability, which is then used in the keymap matrix below.
 // The underscores don't mean anything - you can have a layer called STUFF or any other name.
@@ -16,37 +16,24 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 [_MA] = KEYMAP_ANSI(
   KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,	\
   KC_TAB,		KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,				KC_ENT,  	\
-  KC_LSFT,					KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_RSFT,	MO(_FN1),	\
+  KC_LSFT,		KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_RSFT,				MO(_FN1),	\
-  KC_LCTL,		KC_LGUI,	KC_LALT,	MO(_PN),				KC_SPC, 				KC_SPC,					MO(_FN),	KC_RALT,	KC_APP,		KC_RCTRL),	\
+  KC_LCTL,		KC_LGUI,	KC_LALT,	MO(_PN),	KC_SPC, 				KC_SPC,					MO(_FN),	KC_RALT,	KC_APP,					KC_RCTRL),	\
  
 [_FN] = KEYMAP_ANSI(
   _______,		KC_VOLD,	KC_VOLU,	KC_MUTE,	RESET,		_______,	KC_CALC,	KC_PGUP,	KC_UP,		KC_PGDN,	KC_PSCR,	KC_SLCK,	KC_PAUS,	\
   KC_CAPS,		KC_MPRV,	KC_MPLY,	KC_MNXT,	_______,	_______,	KC_HOME,	KC_LEFT,	KC_DOWN,	KC_RIGHT,	KC_INS,					_______,	\
-  _______,					_______,	_______,	_______,	_______,	_______,	_______,	BL_TOGG,	BL_DEC,		BL_INC,		_______,	_______,	\
+  _______,		_______,	_______,	_______,	_______,	_______,	_______,	BL_TOGG,	BL_DEC,		BL_INC,		_______,				_______,	\
-  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	_______),	\
+  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				_______),	\
  
 [_FN1] = KEYMAP_ANSI(
   KC_GRV,		KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		\
   KC_1,			KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		KC_MINS,				KC_EQL,		\
-  _______,					_______,	_______,	_______,	_______,	KC_QUOT,	KC_SLSH,	KC_LBRC,	KC_RBRC,	KC_BSLS,	KC_RSFT,	_______,	\
+  _______,		_______,	_______,	_______,	_______,	KC_QUOT,	KC_SLSH,	KC_LBRC,	KC_RBRC,	KC_BSLS,	KC_RSFT,				_______,	\
-  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	_______),	\
+  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				_______),	\
  
 [_PN] = KEYMAP_ANSI(
   _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	\
-  RGB_TOG,		RGB_HUI,	RGB_SAI,	RGB_VAI,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	\
+  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,	\
-  RGB_MOD,					RGB_HUD,	RGB_SAD,	RGB_VAD,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	\
+  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,	\
-  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	RESET),
+  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				RESET),
-};
+};
-
-void led_set_user(uint8_t usb_led) {
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // Turn capslock on
- 	   	PORTE &= ~(1 << 6);
-
-
-    } else {
-        // Turn capslock off
-    	PORTE |= (1 << 6);
-    }
-}
-

keyboards/atom47/keymaps/default/readme.md

@@ -1 +1,10 @@
-This is the default keymap as found on the Vortex Core, with some added buttons for RGB and backlight control.
+To be updated...
+
+
+// This layer is just a blank template to be copied for easy layer creation. please don not edit it.
+
+ [_LX] = KEYMAP_ANSI(
+   _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	\
+   _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,	\
+   _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,	\
+   _______,		_______,	_______,	_______,	    _______, 			_______,			               	_______,	_______,	_______,	RESET),

keyboards/atom47/keymaps/maartenwut/keymap.c

@@ -1,46 +0,0 @@
-#include "atom47.h"
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-
-#define _MA 0 //Main layer
-#define _LO 1 //FN1
-#define _RA 2 //FN
-
-#define _______ KC_TRNS
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[_MA] = KEYMAP_ANSI(
-  KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,	\
-  KC_TAB,		KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,				KC_ENT,  	\
-  KC_LSFT,					KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_SLSH,	KC_RSFT,	\
-  KC_LCTL,		KC_LGUI,	KC_LALT,	MO(_LO),				KC_SPC, 				KC_SPC,					MO(_RA),	KC_RALT,	KC_APP,		KC_RCTRL),	\
-
-[_RA] = KEYMAP_ANSI(
-  _______,		_______,	_______,	_______,	_______,	_______,	_______,	KC_PGUP,	KC_UP,		KC_PGDN,	_______,	_______,	_______,	\
-  KC_CAPS,		_______,	_______,	_______,	_______,	_______,	_______,	KC_LEFT,	KC_DOWN,	KC_RIGHT,	_______,				_______,	\
-  _______,					_______,	_______,	_______,	_______,	_______,	_______,	_______,	KC_VOLD,	KC_VOLU,	KC_MPLY,	KC_PSCR,	\
-  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	_______),	\
-
-[_LO] = KEYMAP_ANSI(
-  KC_GRV,		KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		\
-  KC_1,			KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		KC_MINS,				KC_EQL,		\
-  _______,					_______,	_______,	_______,	_______,	_______,	_______,	KC_QUOT,	KC_LBRC,	KC_RBRC,	KC_BSLS,	_______,	\
-  _______,		_______,	_______,	_______,				_______, 				_______,				_______,	_______,	_______,	RESET),	\
-
-};
-
-void led_set_user(uint8_t usb_led) {
-    if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // Turn capslock on
- 	   	PORTE &= ~(1 << 6);
-
-
-    } else {
-        // Turn capslock off
-    	PORTE |= (1 << 6);
-    }
-}
-

keyboards/atom47/keymaps/maartenwut/readme.md

@@ -1 +0,0 @@
-This is the default keymap as found on the Vortex Core, with some added buttons for RGB and backlight control.

keyboards/atom47/readme.md

@@ -1,26 +1,28 @@
-# Atom47
+# ATOM47
 
-![Atom47](https://i.imgur.com/Wwflqvt.png)
+![ATOM47](https://i.imgur.com/rjrFTKT.png)
 
 ## Support
-Keyboard Maintainer: [Maarten Dekkers(https://github.com/maartenwut)  
+Keyboard Maintainer: [Matthew Kerfoot(https://github.com/mkerfoot)  
-Hardware Supported: Atom47 rev3
+Hardware Supported: ATOM47  
 Hardware Availability: [GeekHack.com Group Buy](https://geekhack.org/index.php?topic=93447.msg2545221)  
 
 
 ## Features
-- QMK Firmware  
+QMK Firmware
-- 6 Underglow RGB leds  
+6 Underglow RGB leds
-- In-switch leds  
+In-switch leds
-- Through-hole micro usb connector (less likely to break off!)  
+Through-hole micro usb connector (less likely to break off!)
-- South facing leds for the QMX/Zealencio users  
+South facing leds for the QMX/Zealencio users
-- Multiple layouts  
+Multiple layouts
-- Easily reachable reset button under the spacebar  
+Easily reachable reset button under the spacebar
-- CapsLock indicator  
+CapsLock indicator
 
 ## Build
 To build the default keymap, simply run `make atom47:default`.
 
+For an alternative, heavily modified layout you would just need to run `make atom47:LEdiodes`.
+
 See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
 
-![Atom47](https://i.imgur.com/JfYnOba.jpg)
+![ATOM47](https://i.imgur.com/WebeUOF.png)

keyboards/atom47/rev2/keymaps/LEdiodes/atom47.c

@@ -1,31 +0,0 @@
-#include "atom47.h"
-#include "led.h"
-
-void matrix_init_kb(void) {
-	// put your keyboard start-up code here
-	// runs once when the firmware starts up
-	matrix_init_user();
-	led_init_ports();
-};
-
-void matrix_scan_kb(void) {
-	// put your looping keyboard code here
-	// runs every cycle (a lot)
-	matrix_scan_user();
-};
-
-void led_init_ports(void) {
-    // * Set our LED pins as output
-    DDRB &= ~(1<<5);
-}
-
-void led_set_kb(uint8_t usb_led) {
-	if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
-        // Turn capslock on
-        PORTF |= (1<<5);
-    } else {
-        // Turn capslock off
-        PORTF &= ~(1<<5);
-    }
-	led_set_user(usb_led);
-}

keyboards/atom47/rev2/keymaps/LEdiodes/atom47.h

@@ -1,25 +0,0 @@
-#ifndef ATOM47_H
-#define ATOM47_H
-
-#include "quantum.h"
-
-// readability
-#define XXX KC_NO
-
-#define KEYMAP_ANSI( \
-    k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \
-	k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a,      k1c, \
-	k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a,      k2c, \
-	k30, k31, k32, k33, k34,      k36,      k38, k39, k3a,      k3c \
-) \
-{ \
-    {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c}, \
-	{k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, XXX, k1c}, \
-	{k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, XXX, k2c}, \
-	{k30, k31, k32, k33, k34, XXX, k36, XXX, k38, k39, k3a, XXX, k3c}  \
-}
-
-void matrix_init_user(void);
-void matrix_scan_user(void);
-
-#endif

keyboards/atom47/rev2/keymaps/LEdiodes/config.h

@@ -1,74 +0,0 @@
-/*
-Copyright 2012 Maarten Dekkers <atomkeeb@gmail.com
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x6060
-#define DEVICE_VER      0x0003
-#define MANUFACTURER    Vortex
-#define PRODUCT         Core
-#define DESCRIPTION     Atom47 PCB for the Vortex Core
-
-/* key matrix size */
-#define MATRIX_ROWS 4
-#define MATRIX_COLS 13
-
-// ROWS: Top to bottom, COLS: Left to right
-
-#define MATRIX_ROW_PINS {B1,B2,B3,B7}
-#define MATRIX_COL_PINS {D7,D5,F0,F1,F4,F6,F7,D4,C7,C6,D6,B5,B4}
-#define UNUSED_PINS
-
-#define BACKLIGHT_PIN B6
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* Backlight configuration
- */
-#define BACKLIGHT_LEVELS 4
-
-#define RGB_DI_PIN D0    // The pin the LED strip is connected to
-#define RGBLED_NUM 1     // Number of LEDs in your strip
-
-#define QMK_ESC_OUTPUT D7 // usually COL
-#define QMK_ESC_INPUT B1 // usually ROW
-#define QMK_LED B6
-
-#endif
-

keyboards/atom47/rev2/keymaps/default/keymap.c

@@ -1,39 +0,0 @@
-#include "atom47.h"
-
-// Each layer gets a name for readability, which is then used in the keymap matrix below.
-// The underscores don't mean anything - you can have a layer called STUFF or any other name.
-// Layer names don't all need to be of the same length, obviously, and you can also skip them
-// entirely and just use numbers.
-
-#define _MA 0 //Main layer
-#define _FN 1 //Fn
-#define _FN1 2 //Fn1
-#define _PN 3 //Pn
-
-#define _______ KC_TRNS
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[_MA] = KEYMAP_ANSI(
-  KC_ESC,		KC_Q,		KC_W,		KC_E,		KC_R,		KC_T,		KC_Y,		KC_U,		KC_I,		KC_O,		KC_P,		KC_DEL,		KC_BSPC,	\
-  KC_TAB,		KC_A,		KC_S,		KC_D,		KC_F,		KC_G,		KC_H,		KC_J,		KC_K,		KC_L,		KC_SCLN,				KC_ENT,  	\
-  KC_LSFT,		KC_Z,		KC_X,		KC_C,		KC_V,		KC_B,		KC_N,		KC_M,		KC_COMM,	KC_DOT,		KC_RSFT,				MO(_FN1),	\
-  KC_LCTL,		KC_LGUI,	KC_LALT,	MO(_PN),	KC_SPC, 				KC_SPC,					MO(_FN),	KC_RALT,	KC_APP,					KC_RCTRL),	\
- 
-[_FN] = KEYMAP_ANSI(
-  _______,		KC_VOLD,	KC_VOLU,	KC_MUTE,	RESET,		_______,	KC_CALC,	KC_PGUP,	KC_UP,		KC_PGDN,	KC_PSCR,	KC_SLCK,	KC_PAUS,	\
-  KC_CAPS,		KC_MPRV,	KC_MPLY,	KC_MNXT,	_______,	_______,	KC_HOME,	KC_LEFT,	KC_DOWN,	KC_RIGHT,	KC_INS,					_______,	\
-  _______,		_______,	_______,	_______,	_______,	_______,	_______,	BL_TOGG,	BL_DEC,		BL_INC,		_______,				_______,	\
-  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				_______),	\
- 
-[_FN1] = KEYMAP_ANSI(
-  KC_GRV,		KC_F1,		KC_F2,		KC_F3,		KC_F4,		KC_F5,		KC_F6,		KC_F7,		KC_F8,		KC_F9,		KC_F10,		KC_F11,		KC_F12,		\
-  KC_1,			KC_2,		KC_3,		KC_4,		KC_5,		KC_6,		KC_7,		KC_8,		KC_9,		KC_0,		KC_MINS,				KC_EQL,		\
-  _______,		_______,	_______,	_______,	_______,	KC_QUOT,	KC_SLSH,	KC_LBRC,	KC_RBRC,	KC_BSLS,	KC_RSFT,				_______,	\
-  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				_______),	\
- 
-[_PN] = KEYMAP_ANSI(
-  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	\
-  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,	\
-  _______,		_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,	_______,				_______,	\
-  _______,		_______,	_______,	_______,	_______, 				_______,				_______,	_______,	_______,				RESET),
-};

keyboards/atom47/rev2/keymaps/default/readme.md

@@ -1 +0,0 @@
-This is the default keymap as found on the Vortex Core, with some added buttons for backlight control.

keyboards/atom47/rev2/readme.md

@@ -1,23 +0,0 @@
-# Atom47 rev2
-
-This is the keymap for rev2 of the Atom47. Only 9 of those have been sold for testing purposes. It had a slightly misaligned usb port and the pcb was too thick (should've been 1.2mm instead of 1.6mm). The pcb only supports the default hardware layout, although /u/ChrisSwires has [modified his](https://www.reddit.com/r/MechanicalKeyboards/comments/7n2dua/not_your_average_core_with_honeywell/) and put a big spacebar in it.
-
-## Support
-Keyboard Maintainer: [Matthew Kerfoot(https://github.com/mkerfoot)  
-Hardware Supported: Atom47 rev2  
-Hardware Availability: None  
-
-
-## Features
-- QMK Firmware  
-- In-switch leds  
-- Through-hole micro usb connector (less likely to break off!)  
-- Easily reachable reset button under the spacebar  
-- In-switch CapsLock indicator  
-
-## Build
-To build the default keymap, simply run `make atom47/rev2:default`.
-
-For an alternative, heavily modified layout you would just need to run `make atom47/rev2:LEdiodes`.
-
-See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

keyboards/atom47/rev2/rules.mk

@@ -1,65 +0,0 @@
-# MCU name
-#MCU = at90usb1287
-MCU = atmega32u4
-
-# Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
-#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
-#     automatically to create a 32-bit value in your source code.
-#
-#     This will be an integer division of F_USB below, as it is sourced by
-#     F_USB after it has run through any CPU prescalers. Note that this value
-#     does not *change* the processor frequency - it should merely be updated to
-#     reflect the processor speed set externally so that the code can use accurate
-#     software delays.
-F_CPU = 16000000
-
-
-#
-# LUFA specific
-#
-# Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
-
-# Input clock frequency.
-#     This will define a symbol, F_USB, in all source code files equal to the
-#     input clock frequency (before any prescaling is performed) in Hz. This value may
-#     differ from F_CPU if prescaling is used on the latter, and is required as the
-#     raw input clock is fed directly to the PLL sections of the AVR for high speed
-#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
-#     at the end, this will be done automatically to create a 32-bit value in your
-#     source code.
-#
-#     If no clock division is performed on the input clock inside the AVR (via the
-#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
-
-# Interrupt driven control endpoint task(+60)
-OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
-
-
-# Boot Section Size in *bytes*
-#   Teensy halfKay   512
-#   Teensy++ halfKay 1024
-#   Atmel DFU loader 4096
-#   LUFA bootloader  4096
-#   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
-
-
-# Build Options
-#   comment out to disable the options.
-#
-BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
-CONSOLE_ENABLE = no	# Console for debug(+400)
-COMMAND_ENABLE = no    # Commands for debug and configuration
-NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE = no   # Enable keyboard underlight functionality (+4870)
-BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality (+1150)
-MIDI_ENABLE = no 		# MIDI controls
-AUDIO_ENABLE = no
-UNICODE_ENABLE = no 		# Unicode
-BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID

keyboards/atom47/rules.mk

@@ -56,8 +56,8 @@ MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
 EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
 CONSOLE_ENABLE = no	# Console for debug(+400)
 COMMAND_ENABLE = no    # Commands for debug and configuration
-NKRO_ENABLE = no		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-RGBLIGHT_ENABLE = yes   # Enable keyboard underlight functionality (+4870)
+RGBLIGHT_ENABLE = no   # Enable keyboard underlight functionality (+4870)
 BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality (+1150)
 MIDI_ENABLE = no 		# MIDI controls
 AUDIO_ENABLE = no

keyboards/ergodox_infinity/rules.mk

@@ -58,8 +58,6 @@ OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000
 #   comment out to disable the options.
 #
 
-DFU_ARGS = -d 1c11:b007
-
 BOOTMAGIC_ENABLE = no  # Virtual DIP switch configuration(+1000)
 MOUSEKEY_ENABLE  = yes # Mouse keys(+4700)
 EXTRAKEY_ENABLE  = yes # Audio control and System control(+450)

keyboards/infinity60/config.h

@@ -24,8 +24,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define VENDOR_ID       0x1c11
 #define PRODUCT_ID      0xb04d
 #define DEVICE_VER      0x0001
+/* in python2: list(u"whatever".encode('utf-16-le')) */
+/*   at most 32 characters or the ugly hack in usb_main.c borks */
 #define MANUFACTURER Input Club
-#define PRODUCT Infinity_60%_LED/QMK
+#define PRODUCT Infinity_60%/QMK
 /* key matrix size */
 #define MATRIX_ROWS 9
 #define MATRIX_COLS 7

keyboards/infinity60/rules.mk

@@ -56,9 +56,6 @@ OPT_DEFS = -DCORTEX_VTOR_INIT=0x00001000
 # Build Options
 #   comment out to disable the options.
 #
-
-DFU_ARGS = -d 1c11:b007
-
 BOOTMAGIC_ENABLE = no	# Virtual DIP switch configuration
 ## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
 MOUSEKEY_ENABLE = yes	# Mouse keys
@@ -69,4 +66,4 @@ SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
 NKRO_ENABLE = yes	    # USB Nkey Rollover
 CUSTOM_MATRIX = yes # Custom matrix file
 
-LAYOUTS = 60_ansi_split_bs_rshift
+LAYOUTS = 60_ansi_split_bs_rshift

keyboards/whitefox/config.h

@@ -24,6 +24,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define VENDOR_ID       0x1c11
 #define PRODUCT_ID      0xb04d
 #define DEVICE_VER      0x0001
+/* in python2: list(u"whatever".encode('utf-16-le')) */
+/*   at most 32 characters or the ugly hack in usb_main.c borks */
 #define MANUFACTURER Input Club
 #define PRODUCT WhiteFox/QMK
 

quantum/template/keymaps/default/keymap.c

@@ -16,7 +16,7 @@
 #include "%KEYBOARD%.h"
 
 const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
-[0] = LAYOUT( /* Base */
+[0] = KEYMAP( /* Base */
   KC_A,  KC_1,  KC_H, \
     KC_TAB,  KC_SPC   \
 ),

quantum/template/template.h

@@ -22,7 +22,7 @@
 // The following is an example using the Planck MIT layout
 // The first section contains all of the arguments
 // The second converts the arguments into a two-dimensional array
-#define LAYOUT( \
+#define KEYMAP( \
     k00, k01, k02, \
       k10,  k11   \
 ) \

readme.md

@@ -7,11 +7,13 @@
 [![GitHub contributors](https://img.shields.io/github/contributors/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/pulse/monthly)
 [![GitHub forks](https://img.shields.io/github/forks/qmk/qmk_firmware.svg?style=social&label=Fork)](https://github.com/qmk/qmk_firmware/)
 
-This is a keyboard firmware based on the [tmk\_keyboard firmware](http://github.com/tmk/tmk_keyboard) with some useful features for Atmel AVR and ARM controllers, and more specifically, the [OLKB product line](http://olkb.com), the [ErgoDox EZ](http://www.ergodox-ez.com) keyboard, and the [Clueboard product line](http://clueboard.co/).
+This is a keyboard firmware based on the [tmk\_keyboard firmware](http://github.com/tmk/tmk_keyboard) with some useful features for Atmel AVR and ARM controllers, and more specifically, the [OLKB product line](https://olkb.com), the [ErgoDox EZ](http://www.ergodox-ez.com) keyboard, and the [Clueboard product line](http://clueboard.co/).
 
-## Official website
+## Documentation
 
-[http://qmk.fm](http://qmk.fm) is the official website of QMK, where you can find links to this page, the documentation, and the keyboards supported by QMK.
+* [See the official documentation on docs.qmk.fm](https://docs.qmk.fm)
+
+The docs are hosted on [Gitbook](https://www.gitbook.com/book/qmk/firmware/details) and [GitHub](/docs/) (they are synced). You can request changes by making a fork and [pull request](https://github.com/qmk/qmk_firmware/pulls), or by clicking the "suggest an edit" link on any page of the docs.
 
 ## Supported Keyboards
 
@@ -27,6 +29,6 @@ The project also includes community support for [lots of other keyboards](/keybo
 
 QMK is developed and maintained by Jack Humbert of OLKB with contributions from the community, and of course, [Hasu](https://github.com/tmk). The OLKB product firmwares are maintained by [Jack Humbert](https://github.com/jackhumbert), the Ergodox EZ by [Erez Zukerman](https://github.com/ezuk), and the Clueboard by [Zach White](https://github.com/skullydazed).
 
-## Documentation
+## Official website
 
-[https://docs.qmk.fm](https://docs.qmk.fm) is hosted on [Gitbook](https://www.gitbook.com/book/qmk/firmware/details) and [GitHub](/docs/) (they are synced). You can request changes by making a fork and [pull request](https://github.com/qmk/qmk_firmware/pulls), or by clicking the "suggest an edit" link on any page of the Docs.
+[http://qmk.fm](http://qmk.fm) is the official website of QMK, where you can find links to this page, the documentation, and the keyboards supported by QMK.