#pragma once #include "config_common.h" #define VENDOR_ID 0x1234 #define PRODUCT_ID 0x5678 #define DEVICE_VER 0x0001 #define MANUFACTURER QMK #define PRODUCT TRACKPOINT-DEMO #define DESCRIPTION Simple demonstration for IBM Trackpoint integration #define MATRIX_ROWS 1 #define MATRIX_COLS 3 #ifdef PS2_USE_USART #define PS2_CLOCK_PORT PORTD #define PS2_CLOCK_PIN PIND #define PS2_CLOCK_DDR DDRD #define PS2_CLOCK_BIT 5 #define PS2_DATA_PORT PORTD #define PS2_DATA_PIN PIND #define PS2_DATA_DDR DDRD #define PS2_DATA_BIT 2 /* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */ /* set DDR of CLOCK as input to be slave */ #define PS2_USART_INIT() do { \ PS2_CLOCK_DDR &= ~(1<<PS2_CLOCK_BIT); \ PS2_DATA_DDR &= ~(1<<PS2_DATA_BIT); \ UCSR1C = ((1 << UMSEL10) | \ (3 << UPM10) | \ (0 << USBS1) | \ (3 << UCSZ10) | \ (0 << UCPOL1)); \ UCSR1A = 0; \ UBRR1H = 0; \ UBRR1L = 0; \ } while (0) #define PS2_USART_RX_INT_ON() do { \ UCSR1B = ((1 << RXCIE1) | \ (1 << RXEN1)); \ } while (0) #define PS2_USART_RX_POLL_ON() do { \ UCSR1B = (1 << RXEN1); \ } while (0) #define PS2_USART_OFF() do { \ UCSR1C = 0; \ UCSR1B &= ~((1 << RXEN1) | \ (1 << TXEN1)); \ } while (0) #define PS2_USART_RX_READY (UCSR1A & (1<<RXC1)) #define PS2_USART_RX_DATA UDR1 #define PS2_USART_ERROR (UCSR1A & ((1<<FE1) | (1<<DOR1) | (1<<UPE1))) #define PS2_USART_RX_VECT USART1_RX_vect #endif #define MATRIX_COL_PINS { F1, F4, F5 } #define MATRIX_ROW_PINS { F0 } #define UNUSED_PINS /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW #define DEBOUNCE 5 #define LOCKING_SUPPORT_ENABLE #define LOCKING_RESYNC_ENABLE