/* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com> * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #pragma once #if defined(RGBLIGHT_ENABLE) && !defined(RGBLED_NUM) # if defined(KEYBOARD_planck_light) # define RGB_DI_PIN A0 # define RGBLED_NUM 13 // Number of LEDs # endif # define RGBLIGHT_HUE_STEP 12 # define RGBLIGHT_SAT_STEP 12 # define RGBLIGHT_VAL_STEP 12 # define RGBLIGHT_EFFECT_KNIGHT_LENGTH 2 # define RGBLIGHT_EFFECT_SNAKE_LENGTH 2 # ifdef RGB_MATRIX_ENABLE # define RGBLIGHT_DISABLE_KEYCODES # endif #endif // RGBLIGHT_ENABLE #ifdef RGB_MATRIX_ENABLE # define RGB_MATRIX_KEYPRESSES // reacts to keypresses (will slow down matrix scan by a lot) // #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (not recommened) # define RGB_MATRIX_FRAMEBUFFER_EFFECTS // #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects // #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 # define RGB_DISABLE_WHEN_USB_SUSPENDED true // turn off effects when suspended # undef RGB_MATRIX_LED_PROCESS_LIMIT # undef RGB_MATRIX_LED_FLUSH_LIMIT # ifdef KEYBOARD_planck_rev6 # define DRIVER_LED_TOTAL RGBLED_NUM # endif #endif #if defined(KEYBOARD_lets_split_rev2) # define USE_SERIAL # undef USE_I2C # define EE_HANDS #endif #if !defined(KEYBOARD_planck_light) # ifdef RGBLIGHT_ENABLE # define NO_MUSIC_MODE # endif // RGBLIGHT_ENABLE #else # undef QMK_ESC_OUTPUT # define QMK_ESC_OUTPUT E6 // usually COL # undef QMK_ESC_INPUT # define QMK_ESC_INPUT B0 // usually ROW # undef QMK_LED # define QMK_LED D6 # undef QMK_SPEAKER # define QMK_SPEAKER B5 # define SOLENOID_PIN A1 #endif // KEYBOARD_planck_light #if defined(KEYBOARD_planck) # undef PRODUCT # if defined(KEYBOARD_planck_light) # define PRODUCT Drashna Hacked RGB Beacon(Planck Light) # elif defined(KEYBOARD_planck_rev6) # define PRODUCT Drashna Hacked Planck Rev6 # elif defined(KEYBOARD_planck_ez) # define PRODUCT Drashna Hacked Planck EZ # endif #endif #undef NO_USB_STARTUP_CHECK #define EEPROM_I2C_RM24C512C #define ENCODER_DIRECTION_FLIP /* * MIDI options */ /* enable basic MIDI features: - MIDI notes can be sent when in Music mode is on */ // #define MIDI_BASIC /* enable advanced MIDI features: - MIDI notes can be added to the keymap - Octave shift and transpose - Virtual sustain, portamento, and modulation wheel - etc. */ //#define MIDI_ADVANCED /* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ //#define MIDI_TONE_KEYCODE_OCTAVES 2 #define FB_ERM_LRA 1 /* For ERM:0 or LRA:1*/ #define FB_BRAKEFACTOR 6 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */ #define FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */ /* default 3V ERM vibration motor voltage and library*/ #if FB_ERM_LRA == 0 # define RATED_VOLTAGE 3 # define V_RMS 2.3 # define V_PEAK 3.30 /* Library Selection */ # define LIB_SELECTION 4 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */ /* default 2V LRA voltage and library */ #elif FB_ERM_LRA == 1 # define RATED_VOLTAGE 2 # define V_RMS 2.0 # define V_PEAK 2.85 # define F_LRA 200 /* Library Selection */ # define LIB_SELECTION 6 /* For Empty:0' TS2200 library A to D:1-5, LRA Library: 6 */ #endif /* Control 1 register settings */ #define DRIVE_TIME 25 #define AC_COUPLE 0 #define STARTUP_BOOST 1 /* Control 2 Settings */ #define BIDIR_INPUT 1 #define BRAKE_STAB 1 /* Loopgain is reduced when braking is almost complete to improve stability */ #define SAMPLE_TIME 3 #define BLANKING_TIME 1 #define IDISS_TIME 1 /* Control 3 settings */ #define NG_THRESH 2 #define ERM_OPEN_LOOP 1 #define SUPPLY_COMP_DIS 0 #define DATA_FORMAT_RTO 0 #define LRA_DRIVE_MODE 0 #define N_PWM_ANALOG 0 #define LRA_OPEN_LOOP 0 /* Control 4 settings */ #define ZC_DET_TIME 0 #define AUTO_CAL_TIME 3