alvierahman90/qmk_firmware

History

Jack Humbert 18e266f9f2 not quite working		2018-04-30 15:32:50 -04:00
..
keymaps	Make arguments redo, subproject elimination (#1784 )	2017-10-14 11:32:19 -10:00
util	Creates a layouts/ folder for keymaps shared between keyboards (#1609 )	2017-08-23 22:29:07 -04:00
190hotfix.sh	Creates a layouts/ folder for keymaps shared between keyboards (#1609 )	2017-08-23 22:29:07 -04:00
config.h	not quite working	2018-04-30 15:32:50 -04:00
ergodox_ez.c	not quite working	2018-04-30 15:32:50 -04:00
ergodox_ez.h	Creates a layouts/ folder for keymaps shared between keyboards (#1609 )	2017-08-23 22:29:07 -04:00
i2cmaster.h	Creates a layouts/ folder for keymaps shared between keyboards (#1609 )	2017-08-23 22:29:07 -04:00
matrix.c	Creates a layouts/ folder for keymaps shared between keyboards (#1609 )	2017-08-23 22:29:07 -04:00
readme.md	Creates a layouts/ folder for keymaps shared between keyboards (#1609 )	2017-08-23 22:29:07 -04:00
rules.mk	not quite working	2018-04-30 15:32:50 -04:00
twimaster.c	Creates a layouts/ folder for keymaps shared between keyboards (#1609 )	2017-08-23 22:29:07 -04:00

readme.md

ErgoDox EZ

The Ez uses the Teensy Loader.

Linux users need to modify udev rules as described on the Teensy Linux page. Some distributions provide a binary, maybe called teensy-loader-cli.

To flash the firmware:

Build the firmware with make keymapname, for example make default
This will result in a hex file called ergodox_ez_keymapname.hex, e.g. ergodox_ez_default.hex
Start the teensy loader.
Load the .hex file into it.
Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.
Click the button in the Teensy app to download the firmware.

To flash with ´teensy-loader-cli´:

Build the firmware with make keymapname, for example make default
Run ´<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w ergodox_ez_.hex´
Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.