History

Erez Zukerman 6652f5dbc4 LED test		2018-05-30 10:43:15 -04:00
..
keymaps	LED test	2018-05-30 10:43:15 -04:00
util	Creates a layouts/ folder for keymaps shared between keyboards (#1609 )	2017-08-23 22:29:07 -04:00
190hotfix.sh	Creates a layouts/ folder for keymaps shared between keyboards (#1609 )	2017-08-23 22:29:07 -04:00
config.h	a quick attempt	2018-05-09 09:43:36 -04:00
ergodox_ez.c	i2c fix	2018-05-15 22:30:58 -04:00
ergodox_ez.h	i2c fix	2018-05-15 22:30:58 -04:00
i2cmaster.h	Creates a layouts/ folder for keymaps shared between keyboards (#1609 )	2017-08-23 22:29:07 -04:00
info.json	Add pretty layout to all ergodox clones (#2686 )	2018-04-21 17:00:43 -04:00
matrix.c	i2c fix	2018-05-15 22:30:58 -04:00
readme.md	Syntax update (#2660 )	2018-04-24 09:49:34 -07:00
rules.mk	i2c fix	2018-05-15 22:30:58 -04:00
twimaster.c	Creates a layouts/ folder for keymaps shared between keyboards (#1609 )	2017-08-23 22:29:07 -04:00

ErgoDox EZ

The Ez uses the Teensy Loader.

Linux users need to modify udev rules as described on the Teensy Linux page. Some distributions provide a binary, maybe called teensy-loader-cli.

To flash the firmware:

Build the firmware with make <keyboardname>:<keymapname>, for example make ergodox_ez:default
This will result in a hex file called ergodox_ez_keymapname.hex, e.g. ergodox_ez_default.hex
Start the teensy loader.
Load the .hex file into it.
Press the Reset button by inserting a paperclip gently into the reset hole in the top right corner.
Click the button in the Teensy app to download the firmware.

See also video demonstration using Teensy in auto mode.

To flash with ´teensy-loader-cli´:

Build the firmware with make keymapname, for example make default
Run ´<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w ergodox_ez_.hex´
Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.

Settings

You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively slow scan rate.