qmk_firmware/keyboards/40percentclub/ut47
James Young 4b453dca92
Remove MIDI Configuration boilerplate (#11151)
* remove keyboard-level instances of `MIDI_ENABLE = no`

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e  '/^[ #]*MIDI_ENABLE[ \t]*=[ \t]*no/d' {} +
```

Co-Authored-By: Nick Brassel <nick@tzarc.org>

* fix case-sensitivity issues on MIDI_ENABLE

Change instances of `MIDI_ENABLE = YES` to `MIDI_ENABLE = yes`.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;MIDI_ENABLE[ \t]*=[ \t]*[Yy][Ee][Ss];MIDI_ENABLE = yes;g' {} +
```

* replace `# MIDI controls` with `# MIDI support`

Replace `# MIDI controls` with `# MIDI support` in keyboard-level `rules.mk` files.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*MIDI[ \t]*\(controls\|support\).*;# MIDI support;g' {} +
```

* align inline comments

Aligns the inline comments to the length used by the QMK AVR rules.mk template.

Command:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;MIDI_ENABLE *= *yes.*;MIDI_ENABLE = yes           # MIDI support;g'  {} +
```

* remove commented instances of `MIDI_ENABLE` from keyboard `rules.mk` files

Commands:

```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#\([ \t]*MIDI_ENABLE\) = yes; \1 = no ;' {} +
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;^\([ \t]*\)\(MIDI_ENABLE = no\);\2\1;' {} +
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e '/^[ #]\+MIDI_ENABLE *= *no/d' {} +
```

* remove MIDI configuration boilerplate from keyboard config.h files

Co-authored-by: Nick Brassel <nick@tzarc.org>
2021-08-16 06:51:13 +10:00
..
keymaps keymap_extras: Remove deprecated defines (#12949) 2021-07-06 09:05:11 +10:00
config.h Serial refactor (#11521) 2021-02-06 09:20:48 +11:00
info.json relocate 40percent.club boards to new parent folder (#4380) 2018-11-08 15:17:41 -08:00
LED_controls.ino relocate 40percent.club boards to new parent folder (#4380) 2018-11-08 15:17:41 -08:00
led.c Normalise include statements in keyboard code (#11185) 2020-12-16 14:27:23 +11:00
matrix.c Remove legacy print backward compatiblitly (#11805) 2021-02-06 16:56:13 +00:00
readme.md Modified URLs to point to new locations 2019-01-13 09:11:18 -08:00
rules.mk Remove MIDI Configuration boilerplate (#11151) 2021-08-16 06:51:13 +10:00
ut47.c relocate 40percent.club boards to new parent folder (#4380) 2018-11-08 15:17:41 -08:00
ut47.h Remove KEYMAP and LAYOUT_kc (#12160) 2021-05-11 10:10:31 -07:00

ut47

ut47

Somewhere between ortholinear and standard offset. Created to have all the same functions on a Planck in a keyboard but with a more conventional keyboard row stagger.

Keyboard Maintainer: filoxo, [network_operations]
Hardware Supported: PCB design, Arduino Pro Micro
Hardware Availability: How to order

Instructions

To flash the UT47 without LEDs (single controller), run:

make 40percentclub/ut47:default

To enable the UT47 LEDs (dual controller), run this for the main controller:

make 40percentclub/ut47:default LED_ENABLE=yes

Or you can add LED_ENABLE = yes to rules.mk

And then flash LED_controls.ino to the second controller using Arduino IDE or similar. NOTE: Arduino IDE will require importing additional libraries to compile.

The reason this is an "opt-in" feature is to prevent sending serial communication over the pin, in case it ends up being used for something else (like RGB underglow).

Layout

Go to the default layout README for more information.

Additional info

Credit: Forked from di0ib TMK version

See build environment setup then the make instructions for more information.

Build Guide

u/network_operations' build guide thread