qmk_firmware/keyboards/exclusive/e6v2/bmc/bmc.c
MechMerlin 04684a94ef [Keyboard] E6V2 Bootmapper Client QMK port (#5495)
* initial commit of e6v2 bmc files

* update readme with bmc template and reset key location

* fix up the switch matrix

* add usbconfig.h file

* add i2c files

* cleanup config.h

* cleanup rules.mk and remove non atmega32a architecture code

* add an appropriate keymap for testing

* update readme with warning not to flash this hex file onto atmega32u4 e6v2

* get rgb lights working

* add QMK Configurator support for 60_ansi layout

* add hhkb support layout

* add additional layouts such as tsangan and all and included QMK Configurator support for them

* add bootmagic lite, and have it be set to Esc or the key located at k50

* update readme

* fixup spacing for LAYOUT_all electrical matrix

* add some pragma once magic

* use i2c_master instead of custom i2c.c

* remove the custom i2c.c

* restore a more valid default keymap

* add eep_rst to keymap
2019-03-27 22:12:17 -07:00

97 lines
2.3 KiB
C

/* Copyright 2019 MechMerlin
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "bmc.h"
#include "rgblight.h"
#include "i2c_master.h"
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
matrix_init_user();
}
void matrix_scan_kb(void) {
// put your looping keyboard code here
// runs every cycle (a lot)
matrix_scan_user();
}
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
// put your per-action keyboard code here
// runs for every action, just before processing by the firmware
return process_record_user(keycode, record);
}
void led_set_kb(uint8_t usb_led) {
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
led_set_user(usb_led);
}
#ifdef RGBLIGHT_ENABLE
extern rgblight_config_t rgblight_config;
void rgblight_set(void) {
if (!rgblight_config.enable) {
for (uint8_t i = 0; i < RGBLED_NUM; i++) {
led[i].r = 0;
led[i].g = 0;
led[i].b = 0;
}
}
i2c_init();
i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
}
#endif
__attribute__ ((weak))
void matrix_scan_user(void) {
}
void backlight_init_ports(void) {
// initialize pins D0, D1, D4 and D6 as output
setPinOutput(D0);
setPinOutput(D1);
setPinOutput(D4);
setPinOutput(D6);
// turn RGB LEDs on
writePinHigh(D0);
writePinHigh(D1);
writePinHigh(D4);
writePinHigh(D6);
}
void backlight_set(uint8_t level) {
if (level == 0) {
// turn RGB LEDs off
writePinLow(D0);
writePinLow(D1);
writePinLow(D4);
writePinLow(D6);
} else {
// turn RGB LEDs on
writePinHigh(D0);
writePinHigh(D1);
writePinHigh(D4);
writePinHigh(D6);
}
}