History

Ryan 9dcd03b6ca Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956 ) * Set bootloader to stm32-dfu for STM32F303 * Set bootloader to stm32-dfu for STM32F0x2 * Set bootloader to stm32-dfu for STM32F4x1 * Set bootloader to stm32duino for sowbug * Delete redundant bootloader_defs headers * Add some missing MCU name comments * Move APM32 dfu-suffix overrides underneath bootloader * Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules		2021-06-08 19:48:46 +10:00
..
keymaps
chconf.h
config.h
info.json
mcuconf.h
readme.md
rules.mk	Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956 )	2021-06-08 19:48:46 +10:00
sunsetter.c	[Keyboard] Add Charue Design's Sunsetter (#12547 )	2021-05-11 20:42:56 +02:00
sunsetter.h	[Keyboard] Add Charue Design's Sunsetter (#12547 )	2021-05-11 20:42:56 +02:00

readme.md

Sunsetter

A 65 + 10% F-Key Column Keyboard kit made and sold by Charue Design. More info on charue-design.com

Keyboard Maintainer: Coarse
Hardware Supported: Sunsetter PCB
Hardware Availability: Charue Design

Jumping to Bootloader

To enter the bootloader, you may use bootmagic by holding Space+B or by holding the reset button located at the back of the PCB, right beside the left shift key, for a few seconds.

Make example for this keyboard (after setting up your build environment):

make charue/sunsetter:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.