qmk_firmware/keyboards/helix/pico/keymaps/default/keymap.c
MakotoKurauchi 583be4a5f3 Helix default keymap update (#7465)
* add RGBRST key into helix/pico:default keymap ADJUST layer

* update helix/rev2:default keymap's OLED display contents

 * add RGBRST key to HELIX_ROWS == 4 ADJUST layer
 * add CAPS key to RAISE, LOWER layer
 * add layer status display on slave side oled
 * add RGB LED status display on both side oled
 * save stack memory size
2019-12-03 07:51:18 -08:00

470 lines
18 KiB
C

#include QMK_KEYBOARD_H
#include "bootloader.h"
#ifdef PROTOCOL_LUFA
#include "lufa.h"
#include "split_util.h"
#endif
#ifdef AUDIO_ENABLE
#include "audio.h"
#endif
#ifdef SSD1306OLED
#include "ssd1306.h"
#endif
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
#endif
extern uint8_t is_master;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
enum layer_number {
_QWERTY = 0,
_COLEMAK,
_DVORAK,
_LOWER,
_RAISE,
_ADJUST
};
enum custom_keycodes {
QWERTY = SAFE_RANGE,
COLEMAK,
DVORAK,
LOWER,
RAISE,
ADJUST,
BACKLIT,
EISU,
KANA,
RGBRST
};
enum macro_keycodes {
KC_SAMPLEMACRO,
};
//Macros
#define M_SAMPLE M(KC_SAMPLEMACRO)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Qwerty
* ,-----------------------------------------. ,-----------------------------------------.
* | Tab | Q | W | E | R | T | | Y | U | I | O | P | Bksp |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Ctrl | A | S | D | F | G | | H | J | K | L | ; | ' |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | | N | M | , | . | / |Enter |
* |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
* |Adjust| Esc | Alt | GUI | EISU |Lower |Space |Space |Raise | KANA | Left | Down | Up |Right |
* `-------------------------------------------------------------------------------------------------'
*/
[_QWERTY] = LAYOUT( \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
ADJUST, KC_ESC, KC_LALT, KC_LGUI, EISU, LOWER, KC_SPC, KC_SPC, RAISE, KANA, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
),
/* Colemak
* ,-----------------------------------------. ,-----------------------------------------.
* | Tab | Q | W | F | P | G | | J | L | U | Y | ; | Bksp |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Ctrl | A | R | S | T | D | | H | N | E | I | O | ' |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | | K | M | , | . | / |Enter |
* |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
* |Adjust| Esc | Alt | GUI | EISU |Lower |Space |Space |Raise | KANA | Left | Down | Up |Right |
* `-------------------------------------------------------------------------------------------------'
*/
[_COLEMAK] = LAYOUT( \
KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \
KC_LCTL, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \
ADJUST, KC_ESC, KC_LALT, KC_LGUI, EISU, LOWER, KC_SPC, KC_SPC, RAISE, KANA, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
),
/* Dvorak
* ,-----------------------------------------. ,-----------------------------------------.
* | Tab | ' | , | . | P | Y | | F | G | C | R | L | Bksp |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Ctrl | A | O | E | U | I | | D | H | T | N | S | / |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Shift| ; | Q | J | K | X | | B | M | W | V | Z |Enter |
* |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
* |Adjust| Esc | Alt | GUI | EISU |Lower |Space |Space |Raise | KANA | Left | Down | Up |Right |
* `-------------------------------------------------------------------------------------------------'
*/
[_DVORAK] = LAYOUT( \
KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \
KC_LCTL, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \
KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \
ADJUST, KC_ESC, KC_LALT, KC_LGUI, EISU, LOWER, KC_SPC, KC_SPC, RAISE, KANA, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \
),
/* Lower
* ,-----------------------------------------. ,-----------------------------------------.
* | ~ | ! | @ | # | $ | % | | ^ | & | * | ( | ) | Del |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | F1 | F2 | F3 | F4 | F5 | | F6 | _ | + | { | } | | |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | | F12 | | PrSc | Home | End | |
* |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
* | | | | | | | | | | | Next | Vol- | Vol+ | Play |
* `-------------------------------------------------------------------------------------------------'
*/
[_LOWER] = LAYOUT( \
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_PSCR, KC_HOME, KC_END, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
),
/* Raise
* ,-----------------------------------------. ,-----------------------------------------.
* | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Del |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | F1 | F2 | F3 | F4 | F5 | | F6 | - | = | [ | ] | \ |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | F7 | F8 | F9 | F10 | F11 | | F12 | | PrSc |PageDn|PageUp| |
* |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
* | | | | | | | | | | | Next | Vol- | Vol+ | Play |
* `-------------------------------------------------------------------------------------------------'
*/
[_RAISE] = LAYOUT( \
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_PSCR, KC_PGDN, KC_PGUP, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \
),
/* Adjust (Lower + Raise)
* ,-----------------------------------------. ,-----------------------------------------.
* | | Reset|RGBRST| | | | | | | | | | |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | |Aud on|Audoff|MU TOG|MU MOD| Mac | | Win |Qwerty|Colemk|Dvorak| | |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | |CK TOG|CK RST| CK UP|CK DWN| | | | |RGB ON| HUE+ | SAT+ | VAL+ |
* |------+------+------+------+------+------+-------------+------+------+------+------+------+------|
* | | | | | | | | | | | MODE | HUE- | SAT- | VAL- |
* `-------------------------------------------------------------------------------------------------'
*/
[_ADJUST] = LAYOUT( \
_______, RESET, RGBRST, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
_______, AU_ON, AU_OFF, MU_TOG, MU_MOD, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \
_______, CK_TOGG, CK_RST, CK_UP, CK_DOWN, _______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD \
)
};
#ifdef AUDIO_ENABLE
float tone_qwerty[][2] = SONG(QWERTY_SOUND);
float tone_dvorak[][2] = SONG(DVORAK_SOUND);
float tone_colemak[][2] = SONG(COLEMAK_SOUND);
float tone_plover[][2] = SONG(PLOVER_SOUND);
float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND);
float music_scale[][2] = SONG(MUSIC_SCALE_SOUND);
#endif
// define variables for reactive RGB
bool TOG_STATUS = false;
int RGB_current_mode;
void persistent_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
// Setting ADJUST layer RGB back to default
void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
#ifdef RGBLIGHT_ENABLE
//rgblight_mode(RGB_current_mode);
#endif
layer_on(layer3);
} else {
layer_off(layer3);
}
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_SONG(tone_qwerty);
#endif
persistent_default_layer_set(1UL<<_QWERTY);
}
return false;
break;
case COLEMAK:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_SONG(tone_colemak);
#endif
persistent_default_layer_set(1UL<<_COLEMAK);
}
return false;
break;
case DVORAK:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
PLAY_SONG(tone_dvorak);
#endif
persistent_default_layer_set(1UL<<_DVORAK);
}
return false;
break;
case LOWER:
if (record->event.pressed) {
//not sure how to have keyboard check mode and set it to a variable, so my work around
//uses another variable that would be set to true after the first time a reactive key is pressed.
if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
} else {
TOG_STATUS = !TOG_STATUS;
#ifdef RGBLIGHT_ENABLE
//rgblight_mode(RGBLIGHT_MODE_SNAKE + 1);
#endif
}
layer_on(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
#ifdef RGBLIGHT_ENABLE
//rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change
#endif
TOG_STATUS = false;
layer_off(_LOWER);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case RAISE:
if (record->event.pressed) {
//not sure how to have keyboard check mode and set it to a variable, so my work around
//uses another variable that would be set to true after the first time a reactive key is pressed.
if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false
} else {
TOG_STATUS = !TOG_STATUS;
#ifdef RGBLIGHT_ENABLE
//rgblight_mode(RGBLIGHT_MODE_SNAKE);
#endif
}
layer_on(_RAISE);
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
} else {
#ifdef RGBLIGHT_ENABLE
//rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change
#endif
layer_off(_RAISE);
TOG_STATUS = false;
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
}
return false;
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
return false;
break;
//led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released
case RGB_MOD:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
rgblight_mode(RGB_current_mode);
rgblight_step();
RGB_current_mode = rgblight_config.mode;
}
#endif
return false;
break;
case EISU:
if (record->event.pressed) {
if(keymap_config.swap_lalt_lgui==false){
register_code(KC_LANG2);
}else{
SEND_STRING(SS_LALT("`"));
}
} else {
unregister_code(KC_LANG2);
}
return false;
break;
case KANA:
if (record->event.pressed) {
if(keymap_config.swap_lalt_lgui==false){
register_code(KC_LANG1);
}else{
SEND_STRING(SS_LALT("`"));
}
} else {
unregister_code(KC_LANG1);
}
return false;
break;
case RGBRST:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
RGB_current_mode = rgblight_config.mode;
}
#endif
break;
}
return true;
}
void matrix_init_user(void) {
#ifdef AUDIO_ENABLE
startup_user();
#endif
#ifdef RGBLIGHT_ENABLE
RGB_current_mode = rgblight_config.mode;
#endif
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
iota_gfx_init(!has_usb()); // turns on the display
#endif
}
#ifdef AUDIO_ENABLE
void startup_user()
{
_delay_ms(50); // gets rid of tick
}
void shutdown_user()
{
_delay_ms(150);
stop_all_notes();
}
void music_on_user(void)
{
music_scale_user();
}
void music_scale_user(void)
{
PLAY_SONG(music_scale);
}
#endif
//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
void matrix_scan_user(void) {
iota_gfx_task(); // this is what updates the display continuously
}
void matrix_update(struct CharacterMatrix *dest,
const struct CharacterMatrix *source) {
if (memcmp(dest->display, source->display, sizeof(dest->display))) {
memcpy(dest->display, source->display, sizeof(dest->display));
dest->dirty = true;
}
}
//assign the right code to your layers for OLED display
#define L_BASE 0
#define L_LOWER (1<<_LOWER)
#define L_RAISE (1<<_RAISE)
#define L_ADJUST (1<<_ADJUST)
#define L_ADJUST_TRI (L_ADJUST|L_RAISE|L_LOWER)
static void render_logo(struct CharacterMatrix *matrix) {
static char logo[]={
0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,
0};
matrix_write(matrix, logo);
//matrix_write_P(&matrix, PSTR(" Split keyboard kit"));
}
void render_status(struct CharacterMatrix *matrix) {
// Render to mode icon
static char logo[][2][3]={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}};
if(keymap_config.swap_lalt_lgui==false){
matrix_write(matrix, logo[0][0]);
matrix_write_P(matrix, PSTR("\n"));
matrix_write(matrix, logo[0][1]);
}else{
matrix_write(matrix, logo[1][0]);
matrix_write_P(matrix, PSTR("\n"));
matrix_write(matrix, logo[1][1]);
}
// Define layers here, Have not worked out how to have text displayed for each layer. Copy down the number you see and add a case for it below
char buf[40];
snprintf(buf,sizeof(buf), "Undef-%ld", layer_state);
matrix_write_P(matrix, PSTR("\nLayer: "));
switch (layer_state) {
case L_BASE:
matrix_write_P(matrix, PSTR("Default"));
break;
case L_RAISE:
matrix_write_P(matrix, PSTR("Raise"));
break;
case L_LOWER:
matrix_write_P(matrix, PSTR("Lower"));
break;
case L_ADJUST:
case L_ADJUST_TRI:
matrix_write_P(matrix, PSTR("Adjust"));
break;
default:
matrix_write(matrix, buf);
}
// Host Keyboard LED Status
char led[40];
snprintf(led, sizeof(led), "\n%s %s %s",
(host_keyboard_leds() & (1<<USB_LED_NUM_LOCK)) ? "NUMLOCK" : " ",
(host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) ? "CAPS" : " ",
(host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) ? "SCLK" : " ");
matrix_write(matrix, led);
}
void iota_gfx_task_user(void) {
struct CharacterMatrix matrix;
#if DEBUG_TO_SCREEN
if (debug_enable) {
return;
}
#endif
matrix_clear(&matrix);
if(is_master){
render_status(&matrix);
}else{
render_logo(&matrix);
}
matrix_update(&display, &matrix);
}
#endif