qmk_firmware/keyboards/rgbkb/zen
Fred Silberberg 1aacbc44d1
[Keymap] Added 333fred 5x6_5 keymap (#10272)
* First pass at manuform layout.

* Updates from actual usage on my board. Fixed a couple of bugs, added a stormlight quote randomizer.

* Use a 32-bit timer that can actually hit 5 minutes.

* Some updates after a day of usage:

* Turn off WPM. It's too inaccurate and takes up a decent amount of space that can be devoted to quotes.
* Turn off the OLEDs after 5 minutes
* Move the keys around a bit.
* Add many more quotes.

* Adjust the quotes to make room for missing and misswritten WoT quote. Adjusted the keymap slightly. Adjust the mods display to include one_shots.

* Revert osm on lgui as it makes start menu search impossible to use.

* Use LTO_ENABLE flag.

* License all of my (333fred's) keymaps as MIT.

* Update users/333fred/rgb.c

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Ryan <fauxpark@gmail.com>
2020-10-04 12:24:35 -07:00
..
common Clean up includes for glcdfont headers (#7745) 2020-03-01 17:56:50 +11:00
rev1 [Keymap] Added 333fred 5x6_5 keymap (#10272) 2020-10-04 12:24:35 -07:00
rev2 Remove keymap_config extern from default keymaps (#7399) 2019-11-20 22:31:36 +00:00
config.h
readme.md
rules.mk Trim firmware sizes from default rules.mk, part 3 (#8045) 2020-01-30 11:13:49 -08:00
zen.c
zen.h

Zen Keyboard

A split ergo keyboard with a few goals in mind:

  • Be as thin as possible. Other split KBs (Let's Split, Nyquist, Iris) are 15.2mm thick. The Zen rev2 is only 13.2mm thick including switches and caps when using Kailh Choc low-profile switches, and 22.1mm using standard MX switches and DSA keycaps.
  • Layout designed for gaming. 1.5u pinky keys, ortho alphas, and angled thumb keys. After trying Ortholinear, Atreus62, and Ergodox, this is the best layout for gaming and typing.
  • Per-key RGB lighting. 34 WS2812b LEDs per side make it exceptionally bright
  • Price. Using Arduino Pro Micro, SK6812 LEDs, and PCB FR4 for the case, the cost of each half without switches or caps can be reduced to under $20 when purchased at volume.
  • Options. The Zen rev2 comes with rotary encoder support, SSD1306 OLED pinout, USB-C or TRRS interconnect, and jumpers to enable compatibility with the QMK Proton-C and the Keeb.io Elite-C

Keyboard Maintainer: Legonut Hardware Supported: Zen rev1, Zen rev2 Hardware Availability: RGBKB.net

A build guide and more info for this keyboard can be found here: Zen Build Guide.

Make example for this keyboard (after setting up your build environment):

make rgbkb/zen/rev2:default

To build for a Proton-C:

make rgbkb/zen/rev2:default CTPC=yes

Note: The Proton-C does not have split keyboard, or encoder support. Also OLED driver support is untested. Will update as status changes.

See build environment setup then the make instructions for more information.