qmk_firmware/keyboards/kinesis
Michael Stapelberg 143ded332d
kint36: set correct EEPROM size (#12946)
The Teensy 3.6 comes with 4096 bytes of EEPROM.

This is commit 1 of 2 to make the EEPROM work.
The next commit changes the core code to wire up the EEPROM.
2021-06-24 12:54:18 +10:00
..
alvicstep add kinesis/kint36 (#10171) 2021-03-31 10:41:41 +11:00
keymaps [Keymap] add kinesis/keymaps/stapelberg (#12430) 2021-04-18 23:42:40 -07:00
kint2pp [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625) 2021-04-20 10:08:29 -07:00
kint36 kint36: set correct EEPROM size (#12946) 2021-06-24 12:54:18 +10:00
nguyenvietyen Change BOOTMAGIC_ENABLE=yes to use Bootmagic Lite (#12172) 2021-04-12 21:18:52 +02:00
stapelberg add kinesis/kint36 (#10171) 2021-03-31 10:41:41 +11:00
.noci Initial list of keyboards to exclude from CI (#11213) 2020-12-21 15:38:39 +01:00
config.h add kinesis/kint36 (#10171) 2021-03-31 10:41:41 +11:00
info.json
kinesis.c
kinesis.h add kinesis/kint36 (#10171) 2021-03-31 10:41:41 +11:00
readme.md
rules.mk Change BOOTMAGIC_ENABLE=yes to use Bootmagic Lite (#12172) 2021-04-12 21:18:52 +02:00

Firmware for the Kinesis Advantage/Contoured keyboard

There are at least two different ways to replace the controller in this keyboard.

The Stapelberg folder contains the docs and configuration for using the custom controller created by Michael Stapelberg.

The alvicstep folder contains docs and configuration for directly wiring a Teensy2++ to the existing controller board. This follows the pinouts described in https://github.com/alvicstep/tmk_keyboard, which is where the name comes from.

Keymaps

Both hardware solutions should work with the same keymaps