History

James Young a8d64c8b89 Change `BOOTMAGIC_ENABLE=yes` to use Bootmagic Lite (#12172 )		2021-04-12 21:18:52 +02:00
..
keymaps	Fix keycode mappings for via and ensure they don't change within protocol (#12130 )	2021-03-15 12:19:01 +11:00
rev1	Change `BOOTMAGIC_ENABLE=yes` to use Bootmagic Lite (#12172 )	2021-04-12 21:18:52 +02:00
rev2	Change `BOOTMAGIC_ENABLE=yes` to use Bootmagic Lite (#12172 )	2021-04-12 21:18:52 +02:00
rev3	Refactor to use led config - Part 6 (#12115 )	2021-03-10 22:48:18 +00:00
.noci
config.h	Refactor to use led config - Part 6 (#12115 )	2021-03-10 22:48:18 +00:00
info.json
readme.md
rules.mk	YMD75: move MCU/Bootloader rules to revision level (#9452 )	2020-06-18 00:15:22 -07:00
ymd75.c
ymd75.h

readme.md

YMD75 / MT84

75% keyboard from YMDK. YMDK sell the board and name it "YMD75", however revision 1 of the PCB has "MT84" printed on both sides.

This firmware can also be flashed onto the KBDFans KBD75 Round 2 Bootmapper Client boards sold during the mid-2018 timeframe.

Keyboard Maintainer: Wayne K Jones
Hardware Supported:
- rev1 (ATmega32a)
- rev2 (ATmega32a)
- rev3 (ATmega32u4)
Hardware Availability: https://www.aliexpress.com/item/32812690592.html

Make example for this keyboard (after setting up your build environment):

make ymd75/rev1:default

Flashing example for this keyboard (after setting up the bootloadHID flashing environment)

make ymd75/rev1:default:flash

Reset Key: Hold down the key located at Key below the top right key, commonly programmed as Backspace while plugging in the keyboard. On PCB revision 2, enter the bootloader by holding L_CTRL while plugging in the keyboard.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.